Service ftp, IPV6_ADDRFORM setsockopt() failed:
FTP failing and Apache appears to be stalled. Error appears in my system.log about every 15 minutes and then FTP restarts and Apache wakes up. WHY? I disabled REMOTE ACCESS - which has NOT helped, (as suggested on another site as a possible solution), but this has become very annoying. What's the best way to repair this?
Okay - cool, but there also is an annoying ftp cramp that appears randomly when I can not ftp to the machine (it times out) and I also notice that Apache stops responding and users start calling me. Then like magic, Apache wakes up and ftp starts running. I noticed in the the logs that SIGTERM is also called and then ftp is restarted. I will try to get the actual log output tomorrow. I disabled ARD so now I can't get in from home and look up the message. That's about all I can recall right now from the logs. There doesn't appear to be any other panic calls either. I installed the Security Update 2005-009 today and it appears more stable. I can't seem to elicit the same behavior by hammering the server with massive data requests or multiple hits.
Apache and FTP issues are completely independent of
the IPV6_ADDRFORM setsockopt() failed
messages.
All that message means is that the service in
question tried to bind to an IPv6 address, but
couldn't - presumably because you're not running
IPv6.
It shouldn't cause any problem in normal operation
(which uses IPv4).
If you're having issues with Apache and FTP you need
to dig further to find the cause. However, if this
error message is the extent of the problem, then you
have nothing to worry about.
Similar Messages
-
CSM - service ftp not working in dispatch mode
I'm trying to convert my CSM load-balancing environment from directed to dispatch mode. I've had success with normal telnet traffic but run into problems with FTP.
My real servers are layer-2 adjacent to the switch.
My config looks like this:
ip slb vlan 19 client
ip address 176.11.16.11 255.255.240.0
ip slb vlan 9 server
ip address 176.11.48.11 255.255.240.0
serverfarm FTP
no nat server
no nat client
real 176.11.48.104
real 176.11.48.110
vserver FTP
virtual 176.11.16.12 tcp ftp service ftp
no unidirectional
serverfarm FTP
I've put a sniffer on the server side vlan and I can see this pattern:
1) Client SYN pkt goes through CSM, gets
routed to server.
2) Server responds with SYN/ACK, but this packet goes directly back to the client (not through the CSM, because I'm not NATing)
3) Client responds with the final ACK, which goes to the CSM, but the CSM eats the packet. When I turn on debug module csm 11 ftp, I see that each time the final ACK is received by the CSM, it outputs these lines:
May 4 20:48:06.758 UTC: CSM11: called slowpath_ftp_rx
May 4 20:48:06.758 UTC: CSM11: no session for ftp rx
the CSM conn display shows:
prot vlan source destination state
In TCP 19 176.11.16.103:1131 176.11.16.12:21 ESTAB
Why doesn't the ACK get processed and sent to the correct server by the CSM?
One additional note: I also tried this same scenario but without specifying 'service ftp' on the virtual server defintion. In that case, the control connection comes up fine but any attempt to bring up a data connection fails (times out). But then again, that's the whole point of 'service ftp', right?the problem is your point #2.
If you do service ftp, the CSM expects to terminate the connection from the client and open a new one with the server.
This is how the csm can listen to all the info passed between client and server.
Moreover, the csm will need to see the server response to identify which port the server will be listening on for data connection.
So, definitely not a good idea to do direct server return with this type of config.
You should remove the 'service ftp' command and have anothe vserver to catch all data traffic. You could use a vserver with no tcp port or port 20 if your servers are configured to only use port 20.
You can then use sticky-srcip to make sure the control channel and data channel are sent to the same server.
Gilles. -
Itunes wont open and when re-installed received this msg: Service Apple mob device failed to start. You have insufficent privileges to start system svc. Help?
Download Itunes from Apple.com, not from within Itunes.
Redo the install, following the below procedure. However, when you re-install Itunes, right click and run the install as administrator. For Win 7, you have to hold down the cntrl and shift keys when you right click and then "run as administrator" will be an option.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Vista, Win 7 & later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes -
I was trying to do the latest update on my desktop for my Itunes. I got MSVCR80.dll is missing. I saw a post about deleting all the apple itunes programs, restarting and reinstalling. I tried that. As it was installing a message came up about "Service'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start systems services. I did a retry, got the same message, then hit ignore. It went on. Then a message popped up saying "Itunes not installed correctly" Error 7 (Windows error 126)
Now my Itunes program will not open at all. What gives? This is very frustrating and I am not very computer literate to begin with.Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
Error 1920-Service 'Apple Mobile Device' failed to start.
Hi,
When ever I try to install the Apple Mobile Device Support this message shows up "Error 1920-Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services". I have uninstalled itunes multiple times. I have tried only installing the Apple Moblie Devuce Support by doing the extract file from WinRaff. Nothing has worked. Could you please help me? I'm getting relly frusturated with this whole thing. All I want to do is download songs on to my i-pod.
Thank You,
Aleida H.I guess the short answer is don't try to pass MSI properties to the installer.
I don't think this is anything your fellow users can help with, but you might want to file a report at Bug Reporter.
tt2 -
not able to install itunes in windows 7. Whwn I am installng setup the error displayed as "Service 'Apple Mobile Device' failed to start Verify that you have sufficient privileges to start system services" and when i ignore this message and continue with installation of itunes and open the installed itunes in laptop it gaian shows the error "iTunes was not installed correctly. Please reinstall iTunes Error7(Windows Error 14001)". Please provide me some solution.
Please give me some solution on above issue.....
-
Can't download iTunes "Service Apple Mobile Device failed to start.
I have a new computer and I am unable to download iTunes. I get the following message "Service 'Apple Mobile Device' failed to start. Verify that you have suffiecient privileges to start system services." Please note, iTunes is not installed at this point. Previous discussions have been unhelpful, as they direct me to iTunes files that are currently non-existent due to me not being able to complete installation.
Any help would be appreciated! Thanks!Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects. -
When attempting to update to latest version of iTunes on my PC (11.1.4) I received an error message: Microsoft Visual C++ Runtime error as well as: AppleSync Notifier.exe - entry point not found, the procedure entry point sqlite_wal_checkpoint cound not be located in the dynamic link library SQLite3.dll.
I unistalled iTunes, then attempted to reinstall. I get to a point where I receive the following response: Service (Apple Mobile Device) failed to start.Verify that you have sufficient privileges to start system services." I'm stuck at this point and unable to proceed with install. Help please!Hi yuiopyy,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
Service apple mobile device failed to start privileges
I tried to download the latest version of ITunes, and I received this message: Service Apple mobile device failed to start. Verify that you have sufficient privileges to start system services.
How can i solve the problem?
Thanks for your help.
Ephrem65Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
How do I fix this problem??
I received this Error Message while trying to install on my netbook again. (Service 'Apple Mobile Device' Failed to start. Verify that you have sufficient privileges to start system services. I had Itunes on already but it stop work so I uninstalled it to reinstall it but it wont work.Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
-
I keep getting this error message when I try to install iTunes. I have uninstalled/installed several times making sure that I removed EVERY file associated with this program. I do have the privilages however I am being ignored. Before I become bald from pulling my hair out can you please HELP!!!!!!!
Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services.SAME EXACT PROBLEM! SO FRUSTRATED AND ****** OFF!
-
Normal update of iTunes to 11.1.4 fails. Suggests installing from web site
I install from iTunes.com. Install issues the messages:
Service "Apple Mobile Device' failed to start.
Verify that you have sufficient privileges to start system services
I do have necessary privilegs. I hit ignore. See window with successful install come up and finish with launch. I get the messages:
iTunes was not installed correctly.
Please reinstall iTunes
Error 7 (Windows error 126)
Tring to start iTunes from desktop gives:
This application failed to start because MSVCR80.dll was not found
Re-installing the application may fix the problem.
Further repair or remove/reinstall does not fix the problem (including after reboot)
Thie is the first time this has happened. I'm not sure where to go from here
Thanks for any help.Earlier suggestion worked. That is, Use software add/remove to delete all 5 iTunes applications:
Apple Application Support
Apple Mobile Device Support
Aple Sortware Update
Bonjour
iTunes
Reboot and install/ -
I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
On pressing retry I got the same message.
On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
I reinstalled with the same error messages and the same results.
I uninstalled existing and reinstalled from scratch and the same error messages again.
I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
I hope you can advise me how to recover my backupsHi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
this is the message i received while installing iTunes "Service "Apple Mobile Device" failed to start. verify that you have sufficient privileges to start system services". I had to uninstall and then reinstall iTunes because something wrong happened with the update.
please help me!Did you tear down iTunes and other software? Did you reinstall using administrator priveliges?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
i tried to install the recent itunes update and this kept popping up...what the heck does that mean? please help! Service-apple mobile device failed to start. verify that you have sufficient privileges to start system services
Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!!
Maybe you are looking for
-
"Error downloading purchased music. Disk could not be read or written to.
I just purchased an album. It downloaded 23 of the 25 tracks until it gave me this error: "There was an error downloading your purchased music. The disk could not be read from or written to." I double checked my hard drive space and found I had about
-
Page Fragment and javascript - need help please
Hi all.. I have a page fragment (being used as a header) and am trying to get a text field in this page fragment to recieve a value from a javascript (that is embeded in the page fragment).. see the example below.. --------------PageFragment1--------
-
What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired" I get this when I try to repair permissions in disk utility.
-
I have all my music on my ipod but I can't get that music onto my new laptop , how do I do that?
-
I just upgraded to Illustrator CC, thinking it might be the solution to a number of glitches I had been experiencing with CS6. I have posted them in this forum under 'trouble with small things.' Almost right of the hop, I am finding not only the o