Service Groups in CE 7.1.1 - ES Workplace as Provider System?

All,
I'm currently trying to set up ES Workplace as a provider system for multiple services as a Service Group under CE 7.1.1
I assume this requires setting up sr.esworkplace.sap.com as a technical system in the SLD. Is this correct?
Where do I find the connection details for the SLD?
What's the WSIL I have to specify in the services search settings? I've tried http://erp.esworkplace.sap.com/sap/bc/srt/wsil without success.
Many thanks!
Michael

Hi Michael,
Have you had a look at the following?
http://help.sap.com/saphelp_nwce711/helpdata/en/84/c5f9c81f8d4de28a20f5dca473017c/frameset.htm
http://help.sap.com/saphelp_nwce711/helpdata/en/28/1b90eacdd748a999ad532f8d6833cc/frameset.htm
Cheers
Phillip

Similar Messages

Error activating logical port for service group

Hi,
I reconfigured the Starter Services because I changed the backend.
It all worked fine, but in SOAMANAGER it throws an error when trying to activate logical ports for service group /IWCNT/BPC_SERVICE_GROUP (error is thrown for all 4 service groups he wants to activate)
Configuration of proxy '/IWCNT/CO_BPC_CONT_BYID_QR_OB' failed
    Failed to create logical port for local shortcut.
         Service group '/IWCNT/BPC_SERVICE_GROUP' is not assigned to the own business system.
            Failed to create a logical port using Service Registry.
                Use profile name = 'SAPLOGONPROFILE' version = '4'
                      Failed to create a logical port for inbound interfaceCustomerERPRelationshipContactPersonByIDAndContact'            'http://sap.com/xi/APPL/SE/Global'
                             UDDI error: No Primary Services Registry maintained in this System.
I checked:
1. The provider system name
2. WSIL works fine
3. The profiles used are the same
If i take a deeper look at the service groups there where no logical ports created.
Thank you
Regards
Pit

Hi Alex,
I followed the steps mentioned in the guide (3.3.2) but it didn´t work at all.
The services uses all the same profile. The profile is importet in the SCL.
When I process the pending tasks this massages shown up:
Failed to create a logical port using WSIL (This step is red)
Use profile name = 'SAPLOGONPROFILE' version = '4' (This step is OK = green)
Target WSIL type SAP_6.40 (This step is OK = green)
Failed to create a logical port for inbound interface 'CustomerERPRelationshipContactPersonUpdateRequestC' 'http://sap.com/xi/APPL/Global2' (This step is red)
   Could not determine service using WSIL query (This step is red)
Is it normal that on the SCL, in the Business Scenario Configuration there are no entries in the Service Definitions for the Duet_Starter_Service_All scenario.
Regards

What is difference between ESB Service and ESB Service Group

Guys please tell me What is difference between ESB System and ESB Service Group and when we use them, i mean in what condition.
Many Thanks
Deepak

The use of these is explained in the ESB developers guide along with some examples in what case to use them. See: http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28211/esb_jdev.htm#sthref167

Business partner number Issue in Service Groups

Hi ,
In My Current Business process we are creating Manual Organizational Unit Service Groups, at the time of creation system should generate Business partner number with ROLE Organization.
Recently we are updated system windows to UNIX . from that release system not generating business partner number automatically in Organizational unit .
I have run the program HRALXSYNC to Synchronize organizational unit in background, then system generated business partner number but this number not visible under organizational unit beside objective id . Available under transaction BP .
And we are failed to find service group name under service groups result list..
Regards
Raju

Can any One help on this
Regards
Raju

7.2 Trial: Assign Provider system to service group

Hi Experts,
I've created a BPM with an automated activity that shall call a web service provided by a CAF application (everything takes place on a CE 7.2 Trial server).
In WS navigator the CAF web service works.
In my BPM the process always gets stuck in the autmated activity (without any error message).
Now I've tried to setup some system configurations:
1. Creating provider system (in SOA Management/Technical Configuration/System connections)
The communication profile is SAP_DEFAULT_PROFILE, the service source is the service registry.
Pinging the system works, so I guess that it's ok.
2. Setting up the application communication (in SOA Management/Application and Scenario Communication/Application Communication):
There I have to Software components in the list: a) testblcafear and b)testpr~pm
For a) I've assigned SAP_DEFAULT_PROFILE as profile
For b) I tried to add the provider system to the service group, but after saving I always get a red light and the following log message:
Configuration of logical ports for [test_SG] Service Group failed with [
Service [TestService] not found in the registry publications for the assigned provider [CE1 on pcccsn103]. Check if the service is published in the Services Registry. Check if the system SLD ID for the service publication matches the System SLD ID for the assigned provider. Provider System SLD ID: [CE1.SystemHome.pcccsn103.Java]
Service Group:[test_SG]
Service Group application: [test.com/travelmanagementprpm]
Service Reference application: [test.com/travelmanagementprpm]
Configuration Scenarion: [COMPOSITE_APPLICATIONS_CONFIGURATION_SCENARIO]
] error. For more information refer to the trace with ID [001EC96B0BCF00070000005D00001670]. Details: [CE1.SystemHome.pcccsn103.Java] provider system, [test.com/testprpm] Service Group application
The service is in the SR, I can see it under SR/service definitions.
How can it be that the SLD ID is different for provider and and receiver? In both cases it's the same system!
I've checked our SLD and we don't have a system number (because it's a trial license). Could that be the reason?
Thanks in advance!

Hi Sowmya
Say me one think, do you use a trial version of CE?
I have the same problem with the trial version. However, today I've deployed my application in a official released version of CE, and this error don't occur. Maybe this is an error of trial version.
Regards
Marcos.

WAAS / WCCP service groups / L2 adjacencies

Hi all,
I'm having trouble finding a definitive answer on this one. I'm working on a WAAS deployment in a network with asymmetric routing. I want to deploy WAAS accelerators at two geographically dispersed data centre sites (head end). Do the WAAS boxes themselves need to be L2 adjacent with each other in this configuration? i.e. can the service group consist of two routers (one at each DC) and two WAEs (one at each site), with routed links between the DCs (WAEs in separate IP subnets)?
Something like:
- two routers (rtr-A, rtr-B)
- two WAAS accelerators (waas-A, waas-B)
- rtr-A and waas-A are L2 adjacent and use WCCP w/L2 redirection
- rtr-B and waas-B are L2 adjacent and use WCCP w/L2 redirection
- rtr-A and waas-B are not L2 adjacent and use WCCP w/GRE redirection
- rtr-B and waas-A are not L2 adjacent and use WCCP w/GRE redirection
Here's a quick diagram:
http://i4.tinypic.com/62nhf5u.jpg
(all links are L3/routed)
cheers!

Dale,
There is no requirement for the WAE's to be L2 adjacent to each other. Note that the WCCP Forwarding Method is negotiated per Service Group -- so it can either be L2 or GRE. Based on your description, you would want to use GRE Forwarding.
Regards,
Zach

BI Server group and Presentation Services group

Hi Experts,
I've created a BI Server group and a Presentation Services group - both named 'Reporting Superuser'.
Next I've created a user (User_1) in the BI Administration tool and added the user to 'Reporting Superuser'.
The Presentation Services group 'Reporting Superuser' has full control on the right folders and the corresponding dashboards.
I haven't added User_1 to the Presentation Services group 'Reporting Superuser'. According to the documentation that shouldn't be necessary.
Unfortunately when I log in using User_1, I don't see any of the dashboards User_1 should have access to through the group membership.
Is there anything I might have missed?
OBIEE Version 10.1.3.4.1.090414.1900
Thanks for your help
Regards
Andy

First check whether user is assigned with that particular group after logging in..
log in to presentation service with that user and go to my account.. and check for following:
Group Membership
This list shows the groups to which you belong.
Group1
Group2
check whether that user belonged group is there in that list or not...

Business Service , Service Group and Provider System for CE 7.2

Hi
I need documentation about Business Service , Service Group and Provider System for CE 7.2.
Att,
Marco

Did you get one? I need too.
In SAP Help Portal there are a large quantity of documents, such as:
http://help.sap.com/saphelp_nwce72/helpdata/en/88/a552908d4c44dc99b3ec247069921e/frameset.htm
But the content is so much and I do not know with which part I should start.
In the web blog of Ms. Stefanie Bacher:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d70a19-45a3-2b10-bba0-807d819daf46?quicklink=index&overridelayout=true
she has mentioned how to create a service group shortly. But I cannot follow it in my NWDS CE7.1.
Anyone could give me some tipps, how to resolve authorization problem of consuming web services.
Thanks and regards
Rene

Issue with Service Group Configuration for a BPM Process

Hi,
I am working on BPM processes on CE 711. I need to use the Service Group settings. I created a BPM process with a automated activity that maps to an enterprise service in HU2 (SAP ES Workplace system).
After setting up the configuration in NWA for service registry and service group, I run the BPM process. The Enterprise Service runs into error and log records it as 'No matching BindingData is found for SOA smart configuration'. I have done most of the configuration as recommended but the matching end point
url seems to be picked wrongly [http://erp.esworkplace.sap.com/sap/bc/srt/xip/sap/ecc_employeebasicdbyemployeeqr?sap-client=800] .
I could not get any info on notes search and could not get much info about service group config. Any help here is greatly appreciated.
Regards
Suresh

Hi Suresh,
i just got an answer on my ticket. Here it is:
There is a known issue with the upper case of the endpoint published in
the Services Registry and in the WSDL.
Before SP2 the matching for the binding for invocation is done
by the endpoint url. There is a known issue that the endpoint published
in the Services Registry is with lower case of the characters but in theWSDL the endpoint is with upper case. In your case the endpoint url in
the Services Registry is as shown in the exception above:
http://erp.esworkplace.sap.com/sap/bc/srt/xip/sap/ecc_srvcreqcrtrc?sap-client=800
but in the WSDL the endpoint url is with upper case of the endpoint:
../ECC_SRVCREQCRTRC/..
Because of this difference the call fails. This is fixed is 711 SP2.
Workaround for this is if you create a Provider System based on your
WSDL, not a Services Registry one.
Hope that helps...
Best regards
Michael

Service group for particular document type or Purchase Organisation

Dear Gurus,
I want to add service group as like Material group. but my objective is to restrict those service group for particular document type or Purchase Organisation??
Is it possible, if so please advice me the SPRO Settings
Thanks
RS

Hi,
Basically, this task (both customized table activation via SE11 transaction and user exit activation via SE37 transaction) will be done by ABAPer. All you should do is to prepare the functional specs document in which you require -
1)   A generation and activation of the customized table which consists of at least four columns -
     a)   Purchasing Organization;
     b)   Purchasing Document Type;
     c)   Material group/service group
     d)   Purchasing Document Creation Date
2)   A coding and activation of the related function module (You can use SMOD transaction to view the enhancement MM06E005 to view related user exit).
Cheers,
HT

How to change system/service groups in ESB through build file in Antscripts

Hi All,
i have a proublem with Ant Scripts .
I Create a "IClickSystemESB" process that will define different systems for the project. and Create "IClickServiceGroupESB" process This will define different service groups under the systems for the project. and then Create a TestSysServiceESB process This process should use the system/servicegroups.
During deployment of TestSysServiceESB the build file should be able to change the system /service groups to which the process is attached.
Anyone can help me.
Regards
Hari
Edited by: user10222248 on 19 Feb, 2009 3:02 AM

Check out configuration plan feature in soa suite 11g. One of the reference is here @ http://biemond.blogspot.com/2010/02/web-service-references-and-soa.html

How to create "service group" (ABAP webservice consumer) for SOAMANAGER

HI experts,
I'm trying to setup ABAP as a proper webservice consumer using SOAMANAGER in a 7.01 system. I would like to use Business Scenario Communication for this. I want to add Service Groups in the Consumer tab, and I find 2 servicegroups in the 7.01 (ERP 6.04) system: SRT_SG_TEST_01 and SRT_TEST_GROUP. However, I want to create my own Serivce Groups (Consumer), where do I do that? SE80?
All help appreciated, please don't bother describing the ABAP-as-Provider setup, which is the more common approach.
Gr, Wout

Hi ganesh,
Please look at the SAP note 376424 - BAPI_PO_CREATE1: Error messages for parked POs.
Sap recommends to install the support service pack. Take a look at the note for detailed understanding.
Also take a look at SAP NOte
767284 - SE518 occurs although account assignment is supplied to BAPI (this requires Note 552114 must be applied as a prerequisite)
Consider contacting basis team after your analysis about the issue.
Regards,
Sivaganesh

Web Dynpro Error: Service Group

Hi Guys,
I'm created a web dynpro application for consuming web service from service registry. To do so I also creates the Service group SOA_WS_EXECUTION_DEST and assigned it to component in SR. I also assigned the Provider system in it. Still I am getting the same Error.
Please let me the solution of this error if you had encountered it before...
com.sap.esi.esp.lib.mm.config.exceptions.TechnicalException: Failed to create Logical Port for Service Reference with id [ValidatePassportDetailsQueryResponse_In_SOA_WS_EXECUTION_DEST_BASIC]. Reason for the failure is that Neither Authentication Method [None], nor [SAP Logon Ticket] are allowed in the related Communication Profile. Such Authentication Method is needed as the Authenticaton Profile is [businessOrTechnicalUser] and no User Account is assigned, so the Authenticaton Profile is considered to be noAuthentication or businessUserRelated Communication Profile is [SOAProfile 3] and it allows Authentication Method(s) [User Name/Password (Basic)]

imho this question rather related to the SOA forum. I suggest you to post this question there.

CAF import / service group issue?

Hi,
I have developed a caf with a number of webservices exposed (CAF A), this has been deployed to a ce server, within a serperate CAF project (CAF B) I have imported a service from CAF A as an external service and used it within this caf. The two cafs have been deployed to a CE Server and works as expected.
The problem occurs when I have deployed the two caf projects to another CE server different from the one I developed against, CAF B returns data from the orginal environment when calling CAF A's services and not from the environment it should use. If go directly to CAF A say by using ws navigator I get the right data, it is only when I go through caf B I get issue.
Is there away to configure the service groups on NWAdmin and explicitly set which CAF in which environment to use?
Any help will be greatly recieved!
Thanks,
Jon
Edited by: Jon Hardman on Jan 20, 2010 7:25 PM

Hi Jon,
you can specify the provider system for the respective service group via
NWA -> SOA Management -> Application and Scenario Communication -> Application Communication.
Make sure the provider system you assign refers to the correct physical system. You can check this under Technical Configuration - System Connections.
Regards,
Christian

How to set up backend system with Service Group

Where can I set up the backend system configuration for a Service Group in the Services Registry?
Or does it have to be done in the NWA? If so, where in the NWA?
Regards,
Puja

Hi,
you can configure this in the NWA using the SOA Management workset. Have a look at the following [page|http://help.sap.com/saphelp_nwce711/helpdata/en/a1/9e09c81efa4b2ba92de3f465e305f3/frameset.htm] in the pre-release documentation for more information.
Hope that helps!

Service Groups in CE 7.1.1 - ES Workplace as Provider System?

Similar Messages

Maybe you are looking for