Service guide for DV6308nr

I need to replace the keyboard on my DV6308nr. does anyone know what part # for the needed keyboard. or have a service guide to do the keyboard replacement. how hard is replacement. I'm a newbe.
Thank You.
This question was solved.
View Solution.

Keyboard replacement is not too bad but going any further into that model is hard.
http://h10032.www1.hp.com/ctg/Manual/c01035677.pdf
Above is a link to the Manual. Click the link. See Page 5-28 for instructions on how to replace the keyboard. There is also a parts list in the Manual. You can find a keyboard on eBay for a very reasonable price.
http://cgi.ebay.com/Brand-New-Keyboard-for-HP-Pavilion-DV6000-441427-001-US_W0QQitemZ250506972756QQc...
Again click the above link...$12 keyboard. It is not a real HP part but they work. I have ordered several keyboards from that seller.

Similar Messages

  • Looking for Service Guide for HP Envy H8-1414

    My H8-1414 needs a new bluetooth/wireless card, and there is one on buy.com that I hope could work, but I can't locate a list of compatible cards for this PC.  Would a Intel Centrino 6235 IEEE 802.11n Mini PCI Express Bluetooth 4.0 - Wi-Fi/Bluetooth Combo Adapter - 300 Mbps - Internal - 6235AN.HMWWB work for this?  Thank you for any help you can give me, and if you know the link to download the service guide, that would be very helpful in the future also. 

    Hi tlcarrol, sorry to hear that you are having issue with your Envy computer. I have located a "Upgrading and Servicing Guide" for your system. Please click on the following link.  http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&product=5296859
    If this does NOT resolve the issue, please feel free to write back and I will do more research for you.
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Records management:  Getting record GUID in Service Provider for Transactio

    Hello,
    I wan't to use a service provider for transaction (or may be reports) in a record.
    I the called transaction (Z-transaction) I need the GUID of the record (from which this transaction was calle). Afterwards we want to add automatically a new document into the record.
    Does anybody know, how to transfer (or receive) the ID of the record in our Z-transaction or z-report? Or are there any other techniques how to do this?
    Many thanks for any advice,
    Matthias

    Hi Espen,
    Basic searching for documents and records can be done via the organizer part of the screen. It's the left part of the screen with the role-based view and the history. Select the folder for eg records and open it. Select the record type you want to search on and right click on it adn select search. You then can to enter your parameters (attribute values) on which you want to search. Same for the documents.
    The search you are reffering to is the generic search in which it's possible to search over multiple documenttypes at once. For this however you need to customize RM parts. In the registry for once you have to change some settings on the element type (sps) of the generic document search element (e.g SRM_SPS_GEN_DOCUMENT_DEMO in the service provider SRM_SP_GEN_DOCUMENT). These options are only available in the newer systems (e.g. Netweaver 4s). Not in SAP Enterprise 4.7. So for the generic search options you"ll need more indepth knowlegde on how to customize SAP RM.
    There is a kind of howto on the generic search options on: http://service.sap.com/recordsmanagement in the media library under documentation called "How To Guide: Cross Search based on Property Unification" .
    Hope this helps.
    Best regards,
    Tjalling-Jan Gerkema

  • OBIEE 11g Refresh GUIDs for Presentation Services

    Hi Friends,
    I am facing problem while trying to refresh the GUIDs for the Presentation services during migration from DEV to QA
    When I migrated RPD and Catalog from DEV to QA, the user weblogic was not able to login. So I modified the NQSConfig.INI file to make the below change
    FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = YES*
    and restarted the BI Servers. Now weblogic is able to login. So far good.
    But When I login using weblogic and open 'My Dashboard' I get the following error access denied for user to path /users/weblogic/_portal/dashboard layout*
    Reading the Oracle Documentation I see that the refresh of GUIDs need to be done for Presentation services as well. http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10543/privileges.htm#CHDHGAAH
    However I am not able to find *<ps:Catalog>* in the Instanceconfig.xml file. I can only see a similar one like below
    *<Catalog>*
    *<UpgradeAndExit>false</UpgradeAndExit>*
    *</Catalog>*
    Where should I add the below? I went ahead and put it just below the above. So that my file looks like below. Is this correct?
    *<Catalog>*
    *<UpgradeAndExit>false</UpgradeAndExit>*
    *</Catalog>*
    *<ps:Catalog xmlns:ps="oracle.bi.presentation.services/config/v1.1">*
    *<ps:UpgradeAndExit>false</ps:UpgradeAndExit>*
    *<ps:UpdateAccountGUIDs>UpdateAndExit</ps:UpdateAccountGUIDs>*
    *</ps:Catalog>*
    After saving the instanceconfig.xml , I used opmnctl to stop the Pre.Ser. Stop was successful But I am not able to start the ps. Why is that? Is it a problem with my new entry in Instanceconfig.xml?
    Checking the log files, clearly says its the content of instanceconfig.xml causing the issue.
    ----Log entry--
    [Util Logger] Exception occurred:
         Severity:Fatal
         Type:class saw::Exception const *
         File:C:\ADE\aime_bi\bifndn\analytics_web\main/project/webutil/configreaderinstance.cpp
         Line:540
         Message:Invalid settings in config file: Bad config instance '\\?\C:\Middleware4\instances\instance6\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfig.xml'!
    Any help would be highly appreciated.
    --Joe
    Edited by: bimetrics on Oct 28, 2011 5:06 PM

    Hi,
    i hope u r version You don't need the ps: part either
    If your using obiee11.1.1.3. the instansconfig.xml file it will show like this (ps: part either ) and obiee11.1.1.5. no more that ps: part in the instanceconfig.xml file
    *<UpgradeAndExit>false<UpgradeAndExit>*
    *<UpdateAccountGUIDs>UpdateAndExit<UpdateAccountGUIDs>*
    then
    set it to *<UpdateAccountGUIDs>none</UpdateAccountGUIDs>* and then restart the services
    Refer obiee11.1.1.3.0 version of guide...all r similar except ps: part.
    http://varanasisaichand.blogspot.com/2011/08/refresh-user-guids-obiee-11g.html
    http://gerardnico.com/wiki/dat/obiee/migration
    Thanks
    Deva
    Edited by: Devarasu on Oct 29, 2011 9:45 AM

  • Configuration Guide for Global Trade Service Business Package

    Hello,
    Can anyone provide me with the link where I can download the installation/cofiguration guide for the Business Package for Global Trade Service.
    Regards
    Deb

    Hi Deb,
    in SAP Note 963735 you will find a description how to obtain product documentation for GTS.
    <i>You can access the product documentation on SAP Service Marketplace at service.sap.com/swdc -> Download -> SAP Installations and Upgrades -> Entry by Application Group -> SAP Application Components -> SAP Global Trade services (GTS) -> SAP GTS <Release> -> Installation and Upgrade.
    Note that access to the SAP GTS product documentation is subject to a software license audit. You can only follow the listed navigation steps in the path specified above if you have a current license for SAP GTS. If you do not have a product license for SAP GTS Version >3.0, the entry 'SAP Global Trade Services (GTS)' is missing from the link list under SAP Application Components, which prevents you from navigating further if you lack the appropriate authorization. If you have a valid SAP GTS product license, you can access the contents for the release for which you have the license.</i>
    Best regards,
    Martin

  • Service Manual or Take-apart Guide for Motherboard...

    Does anyone have the Nokia Service Manual for the Booklet? Or a take-apart guide which covers replacing the motherboard? Thanks.

    You will have to try elsewhere for that.
    It's against the rules of this forum to pass on Nokia's internal service manuals or discuss warranty voiding self repairs.
    With it being a computer you may have more luck on a general computer hardware forum.

  • Hardware maintenance guide service manual for LENOVO LT1713P LT2223P LT2452P

    checking the wistron model number or Lenovo i cannot find service docs for any of these, will pay, anyone know any links or signons where these documents may reside for availabile? thank you so much!

    Hi,
    unfortunately Lenovo didn't come back to me, so I still have the broken touch screen...

  • Guide for J2EE Adapter Engine on WAS 6.40 with XI 3.0

    Hi all,
    we are currently struggling with our AE. We are going to migrate from Xi 2.0 to  XI 3.0, we run into problems while configuring our old J2SE AE (for which I have found a good PDF document on the SAP Service Marketplace).
    Now we would like to test/configure the J2EE AE on XI 3.0.
    But I cant find any guide for this on the SAP Service Marketplace. Does anyone know where to find this?
    Thanks
    Nesimi Buelbuel

    Hi Nesimi,
    There is a webinar replay of "Troubleshooting the J2EE Adapter Engine" at
    https://www.sdn.sap.com/sdn/webinar.sdn?res=/irj/servlet/prt/portal/prtroot/com.sap.sdn.wcm.compound.docs//library/uuid/47a9a361-0301-0010-d39a-dd40d34b2e9d
    Also make sure you check these links:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/webinars/configuring a local adapter engine.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/configuration guide - sap xi 3.0.pdf
    Regards,
    Sridhar

  • Installation Manual / Guide For IDES ECC 5.0 / 6.0

    Hi All
    Please any one send me a complete manul / guide for <b>installtion of IDES 5.0 / 6.0.</b> Or send me on xxxx.
    Best reward Points Wait for You
    Thanks In Advance
    Message was edited by:
            Yaroslav Zorenko
        The distribution, participation in distributing or otherwise sending of this material is against the law. The material you are requesting is copyrighted material and available ONLY to customers of SAP. If you need such documents from the SAP Service Marketplace then you must have "S" user ID and login yourself to retrieve this material. If you do not have a "S" user ID then you should contact your own internal company groups responsible and request one or request them to retrieve the document for you.
    By participating and sending such documents you are at risk for legal action and a removal of your account here on SDN and BPX.
    DO NOT send material via email such as this! Further actions will result in officials within your company and your SAP Sales Account being notified and could result in legal action against you as an individual.

    hi,
    go to service market place for install guides go below link
    https://websmp109.sap-ag.de/instguides
    regards
    ajai

  • Where can I find a service manual for Satellite L30?

    Hi guys
    Just wondering if anyone knows where I can find a service manual / engineers guide for a Satellite L30?? I have a broken hinge on my laptop and Toshiba were very helpful in helping me find replacement parts - via Topaz. They were also a bargain at only 8.00 + postage for a pair of them. However......when I enquired about 'how to fit them?' they both became rather 'un-helpful'!!!!
    And I really don't feel like paying PC World the 219.00 they quoted to fit them!!!
    I have no fear of opening and playing around with the insides, but any help or 'pointers' would be gratefully appreciated.
    Many thanks in advance :-)

    Try this online guide:
    http://www.laptopka.com/category/toshiba-satellite-l30-l35/

  • HT5239 Where can I get Apple FIPS Role guide for user so that I can use the APIs from my application

    I am trying to use Apple's FIPS certified crypto library's crypto APIs in my application to do the crypto operations. For that I was asked to refer the "Role Guide : User" in the nist document. But I couldn't find the same. Can I know where I can download the same.

    The OS X and iOS programming documentation is the Cryptographic Services Guide, and related manuals.
    AFAIK, what you're probably after is the Common Crypto stuff that's part of libSystem.  See man CC_crypto for some introductory details of that, and there's a sample program available.
    The devforums.apple.com developer forums and the developer.apple.com web site will be better resources for programming questions than are these ASC forums (and that includes my answer here!), and the Fed-Talk mailing list might be of interest for this question.
    Given the usual arc these security questions follow, I'd suggest ignoring what I've posted here and directly contacting the Apple Developer Technical Services (DTS) folks, and ask for formal help with this.  The folks I've worked with over the years that were looking for FIPS 140-2 crypto stuff and similar usually have a requirement for a paperwork trail involved, and that means direct contact with the vendor when you cannot local published formal statements.   Not unofficial stuff from random folks like me posted here in ASC.  (There's an Apple contact on that FIPS page, BTW.)

  • Service Interfaces for Credit Management using WS-RM

    Hi,
    We are implementing FSCM Credit Management on EHP 5 without using PI. For this we are WS-RM and have configured following service interfaces:
    CreditCommitmentNotification_In
    CreditCommitmentNotification_Out
    CreditWorthinessQuery_In
    CreditWorthinessQuery_Out
    However, when we create sales order, credit check is not being perfomed. Do we need any other service interface for implementing Credit Management?

    Hello,
    I am using ECC 6 ehp 5 Which Enables you to Implement FSCM services via WS-RM (Web Service Reliable Messaging) instead of having to use Previously PI.
    I require to implement the scenario is:
    Credit Management (FSCM) and Integration with FICA without requiring PI.
    I think I have covered all the technical configuration, but do not know how to test credit management and integration with FI-CA, appreciate if you can do to get a guide.
    As indicated by the WSRM configuration guide, run the report SRT_ADMIN_CHECK and the result is:
    Cross-checking system settings
    bgRFC destination is Operational
    bgRFC destination is registered supervisor
    WSRM event handler is activated
    Task is active watcher
    Data collector for monitoring is not activated
    ICF All nodes are active for SOAP Runtime
    Ending cross-check of system settings
    thank you for your help.
    Regards.

  • Need Post installation configuration guide for PI 7.0

    Hi,
    Does anybody have Post installation configuration guide for PI 7.0 ?
    Our basis team has installed PI 7.0.
    Now we need to do the post installation.
    Do we need to do all configuration steps we use to do for XI 3.0 or is it different in PI 7.0.
    Your help appreciated.
    Thanks,
    Vinod

    HI,
    See the below links
    Post Installation steps for activating Adobe Document Services in SAP XI NW 2004S
    -/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
    Link for posnt installation guide
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
    https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
    Regards
    Chilla

  • Best Practice guide for purchasing - payment card processing

    Hello All,
    \Is there any Best Practice guide for “Payments by credit card”/ “Payment card Processing”.
    The biz process is:
    The purchasing department users purchase goods/services using their corporate credit cards. They obtain a credit card voucher/receipt for the purchase made. The credit card co. turns in the credit card statements/files once in a month  the Accounts Payable  matches the receipts with the statements/files & makes the payments.
    Will reward points.
    Thanks & Regards,
    Arpita

    Hi Arpita,
    You might want to check this link
    http://web.mit.edu/sapr3/docs/webdocs/purchpay/ppCC.html
    http://www.bitpipe.com/tlist/Payment-Processing.html
    http://whitepapers.sapinsideronline.com/view.cfm?session=&white_paper=4
    Thanks,
    Jenny
    award points if helpful

  • Any Specific Guide for Ecc 5.0 upgrade to ECC 6.0 (linux/oracle)?

    Hi Gurus
    Is there any  specific guide available for the Upgrade of ECC 5.0 to ECC 6.0 from service market place.
    for the linux operating system and oracle database. or atleast , I want to know what are the mimimum checks to be done (prerequisities) in the ECC 5.0 system which need to upgrade into ECC6.0.
    Thanks in advance
    Balaji

    Hi,
    There is not an specific guide for ECC 5.0 upgrade, just the guides specific for your OS/DB combination, they can be downloaded in https://websmp204.sap-ag.de/instguides but you should use the Unix/Oracle document,

Maybe you are looking for