Service interface not listed in business system in ID.

Hi Experts,
In my QA system service interfaces are not listed in business system in ID, i have added product and SWCV in SLD and i am still unable to see the service interfaces of SWCV that i have added. i have done SLD and CPA cache refresh, restarted the QA system but still unable to resolve the issue.
Please suggest how to resolve this issue.

Hi Venu,
i have done SLD and CPA cache refresh, restarted the QA system but still unable to resolve the issue.
Try if "Compare from SLD" works? This can be accessed by going to ID -> double-click business system -> communication component -> adapter specific identifiers
Regards,
Mark

Similar Messages

How do I set up cloud on my mac when the cloud option is not listed in my system preferences?

how do I set up cloud on my mac when the cloud option is not listed in my system preferences?

Welcome to the Apple Community.
If iCloud isn't in system preferences you will need to update your operating system.
iCloud is part of iOS 10.7.2 or better.

Service Interfaces not showing in the IP when imported in ID in PI7.1

HI Experts,
     I have developed an Integration process(IP) in ESR using some Service interfaces and Operation mapping for implementing BPM.
I am trying to import the IP into my Integration Directory. But the imported Integration process(which is now as good as a Business Service) does not show the Interfaces i have used in the BPM in the ESR.
   Without the interfaces being attached to the IP, i cannot create RD and ID's.
This is the first time BPM is being configured in this server.
Please guide me if there are any settings specific to ccBPM to be done in ECC.
Please help me resolve this issue... i am in a crictical condition to meet the deadline..
Thanx in advance,
Nandan

Hi Neetesh,
         Thanx for your reply. If there are any initial settings to be done in PI, please list them so that i can check if they exist in our system.
Also,when i check(f7) my IP , its showing a message that " Container element my_interface in step Send1 is initialized but is not used ". Is this a concern ?
I have copy pasted my interface names in the RD and InterfaceDtrmn in my ID and completed the ID part of configuration.When i test the BPM by triggering my Purchase Orders from my sender service,it is showing the following error in moni:
"<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack> " in error section and in TRace its showing this error:
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="1" type="T">could not create BPE proxy for message, no XML object definition found for message 70126C4C0C4D0B11E1000000AC113034</Trace>
</Trace>
</Trace>
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
Please suggest how these can be resolved????

Message interface not listed in integration directory

hi,
i have created 2 interfaces inside my message interface........
both are outbound.....!!
i am actually doing 2 scenario's inside the same name space......
when i go to integration directory i am no able to get one of the message interface's while creating the receiver determination and all those things.........?

if ur using business service then just
add outbound interface in receiver side and
inbound interface in sender side.
or if u r using business system then the problem is in ur SLD.
just check ur business system over their.
thanks
reward point if helpful .

** Unable to see message interfaces in ID under Business Systems

Hi Friends,
When I create sender / receiver agreement in ID by choosing the respective Business Systems I am not able to see my message interfaces. Then, I checked the SLD, our SWCV under Products are not assigned in the Business Systems.
Then, I have assigned our SWCV (by selecting the product, be selecting the SWCV) in tehcnical system and business systems, saved and log off from SLD.
But, still those message interfaces are not appeared while select the Business systems. Those interfaces are abstract interfaces. I tried to close the IR and ID, open it again, still the same problem.
What could be the reason ? Reply friends,
Thanking you
Jegathees P.

Hi,
a new import of the Business System is not necessary.
1) Important is to activate the interface in the Integration Repository.
2) Checking in SLD that all installed check boxes are selected. In the Business System -> Installed Software -> select the Product and check that the SC is selected.
In IR it's enough to close the Business System and reopen it to see the new interfaces.
Regards
Patrick

PAPI Service Interfaces not exposed as Web Services

Hi,
In guide Javadoc_PAPI_SAPME_150 there are some public interfaces that are not present as Web Services in SAP NetWeaver Application Server -> Single Service Administration: Service Definitions.
The list of missing interfaces is:
ArchiveServiceInterface
BrowseServiceInterface
BrowseSfcServiceInterface
DateGlobalizationServiceInterface
DBSequenceServiceInterface
DomainServiceInterface
DynamicInvocationServiceInterface
HookExecutionServiceInterface
LocalizedServiceInterface
NumberGlobalizationServiceInterface
OverrideDefinitionServiceInterface
PortletConfigurationServiceInterface
PredefinedFieldGroupConfigurationServiceInterface
PrintingFormatServiceInterface
PrintingTransportServiceInterface
ResourceBundleGlobalizationServiceInterface
RevisionableDomainServiceInterface
RunAsServiceInterface
SchedulingStandardsConfigurationServiceInterface
SpcChartServiceInterface
TextGlobalizationServiceInterface
I don't understand if this is by design or if there are some error in the customer NetWeaver implementation.
Thank you for your help,
Filippo.

Hello Konstantin,
thank you for your response.
Just another question: you say "It's indicated that listed services are not published" but I don't understand where it's indicated.
For example in documentation Javadoc_PAPI_SAPME_150, package com.sap.me.common, ObjectResolverServiceInterface and DynamicInvocationServiceInterface are documented in the same way and I don't see any indication that says if the interface is published as WS or not.
Best regards,
Filippo.

Idoc not visible in Business system

Hello Experts,
I am trying to configure a scenario where in I am trying to use the IDoc ZCNOSE_PRICAT.PRICAT02.ZPRICAT1.
However, this IDoc is not reflected in the business system in which I am using.
I have already released the extension from the backend SAP system.
Can you please suggest what I am missing such that the extension is visible in the Business system.

Hi,
You imported the idoc structure into the ESR, under a specific SWCV.
Make sure that SWCV is linked to your Business System in the SLD.
Kind regards,
Dimitri

Active transactional datasources not listed in business content collection

Dear experts,
for SRM bidding engine i have activated the extractors in SRM through transaction RSA5 and put them on a transport. Replicated them in BW and their they are appearing correctly, activated them and provided infopackages.
Now when i want to activate Business Content SRM role SAP_BW_SRM_ACT_BE and after grouping look for the transactional datasources, they are not listed in the list of objects (grouped 'before and after', collection 'automatic').
1.Is this normal and do i need to make the links between datasources and infosouces myself after activating the role?
2.or does it normally installs the entire flow correctly?
Also weird - my datasources are BI7.0 and some of my BW SRM content is from older 3.x version, containng infosources and communications structures. Can this be the reason why Business Content grouping does not find the datasources?
Regards,
Steven

Hi,
looked at the note but did not provide more info as i already applied what is written in the note.
This role for bidding engine after I have put it into the collective window, among the other objects it will activate it does not list the datasources of the transactional data, nor the links to the infosources.
Installing it like this will require me to connect the datasources manually to the dataflow, which i want to avoid.
Is there a way to make BW connect the transactional datasources of SRM Bidding Engine connect automatically with the business content BW flow of Bidding Engine? this i though would be done by collecting it (before and after), grouping (automatically).
Regards,
steven

Service Interfaces not Parsed in SPROXY

Hi Everyone,
I have a namespace http://sap.com/xi/Global2/testing which is imported with the standard SWCV from SAP Market Place. I recently made some changes to this namespace by importing few 'External Definitions' and then created 'Message Mappings', 'Interface Mappings' and 'Service Interfaces'. All went well on the PI side but when I checked SPROXY to test services, 'Service Interfaces' aren't parsed from the ESR.
I then created another namespace and copied all external objects to that namespace and deleted them from the original namespace of the SWCV whose vendor is sap.com but yet no success in seeing the 'Service Interfaces' of this original namespace in SPROXY.
I have tried SLDCHECK and the 'Test Connection' in the SPROXY which are working perfectly and other namespaces are parsed too but only this specific namespace has got problematic.
Everything is activated in the IR and ID and I have already applied Interface Object not showing in SPROXY
What should I do
Your help and time is much appreciated.
Regards,
Adil Khalil

Hi Adil
Check
Software component missing in SPROXY | SCN.
See Henrique's reply
You can't create custom proxies for standard XI Content (SWCVs whose vendor is "sap.com").
If you wish to use these interfaces, either there's a standard add-on for SRM or it's already included in standard SRM.
If you still wanna create proxies for these interfaces, try to create a custom SWCV and include this standard one as a dependency (hence it will appear as a "Basis" component of your SWCV). Maybe this way it will appear in SPROXY, but I'm not 100% sure.

CcBPM - How to use 1 Message Interface for 2 different Business System

Hi,
I have this bpm scenario below :
JDBC QUERY (ASYN) ---> RFC (SYNC) -
> JDBC INSERT (ASYN) -
> MAIL (ASYN).
So Both JDBC INSERT and MAIL using the same data input from RFC response for instance i will named as MI_RFC_RES_ASYN_ABS. I have problem to configure in the integration directory, how make the xi smart enough to routing in the correct business system.
JDBC -
> BS_JDBC and MAIL -
> BS_MAIL base on the send step in BPM because the interface is the same.
Cheers
Fernand

Hi,
If you want to send the same mesg to diff systems and also need to have the control on seq,
then define 2 diff abstract interfaces for messages going out of BPM (with same message type so that structure is same).
One will be used to define send step for JDBC and other for BPM.
Define 2 send steps in BPM one for JDBC and other for mail using these abstract interfaces.
Now you will have 2 receiver determinations.
Since recr is determined based on sender system interface name and name space,
system name ( BPM ) and name space will be same for both the messages going out of BPM.
for JDBC abstract interface BS_JDBC will be recvr.
and for Mail abstract interface BS_MAIL will be your receiver.
hope it answers your qn.
Regards
Pushkar

DSM service is not deployed in managed system

Hi pros,
in our system landscape, we installed DSM&BRFplus instance and multiple SAP ECC systems. The purpose is to use DSM to deploy BRFplus services to managed systems. However,
When deploying BFFplus functionsto a managed system via DSM. Although in DSM it says the function has been deployed successfully. But when checking in the managed system (via program "FDT_GENERATION_TOOL"), no functions were generated.
As a result, in the managed system I can not use API to invoke any BRFplus service. Can anyone help on this? I have checked RFC destination setup and added managed systems.
thanks

Hi Nisha/Vikram,
Thanks for your reply. I have executed above command as per the note 1907909.But again I am able to find the agent when I am executing step4 of managed system configuration (assign diag agant). I checked the error log in agent admin and I could find below error.
CIM_ERR_FAILED: User credentials are invalid or user is denied access <WBEMHttpRequestSender.java:398:newCommunicationException()>
For this I found that "slddsuser" is getting locked time and again.I am not aware as why this user id is getting locked repetitively.
Incorrect client ID. The stub is not connected yet.
Nested exception
is:
com.sap.engine.services.rmi_p4.P4IOException: Cannot make connection.
<P4ObjectBrokerClientImpl.java:726:getException()>
Unexpected exception.
Nested exception is:
com.sap.engine.services.rmi_p4.P4IOException: InterruptedException while
waiting fot the message.
<P4ObjectBrokerClientImpl.java:739:getException()>
Diagnostics agent is not connected to solution manager server,
connection status: DISCONNECTED
<SMDJNDILookupAgentSideImplementation.java:120:_lookup()>
Object not found in lookup of SMD_DataEnrichment_Registrator.
<ServerContextImpl.java:652:lookup()>
No
connection with the server. <ClientContext.java:2835:close()>
Please Suggest
Thanks
Aditya Roushan

"Memory Overview" not listed in Apple System Profiler

I have a beige G3 minitower running OS 10.2.6 that currently has 192 MB RAM. I am set to get more RAM for this machine, but I noticed that my Apple System Profiler doesn't even have a Memory Overview category showing what RAM is presently in which slot. (I'm used to seeing that in OS 9.2) In other words, I see the software, hardware, network, and production information overviews in the System Profile tab but not the Memory overview. (I get the 192 MB when I choose About This Mac from the Apple menu.) Did Apple discontinue the Memory Overview feature with Jaguar? Or is there some Preference or View I need to set? (The Preferences command is greyed out on the Apple System Profiler menu)It just seems strange to me that I can't get specific info on the currently installed RAM
beige g3 minitower Mac OS X (10.2.x)

Patroklus,
That is what is showing on the right hand side of the page, correct?
What I listed, is what is in the left column of System Profiler, when all of the Disclosure Triangles are clicked, and pointing down.
I then click on Memory, to highlight it, and on the right side of the Profiler,
my Memory Slots are displayed.
Top Half Of Window
DIMMO/J13 With Size Type Speed displayed
DIMMO/J14
Bottom Half Of Window
DIMM0/J13:
Size: 256 MB
Type: SDRAM
Speed: PC133-333
ali b

Approval Service is not listed in Folder's settings option

Hi,
CM Version : 6.0.2.4.7
For the repository in question, I have activated StateManagement and Properties CM services. Even after that I do not see the option 'Approval' in Folder's Settings.
Hence I am not able to enable the approval service for a Folder. Any help is appreciated.
Regards, Vishnu

Hi Vishnu,
> But I see 'Approval Administration' in the list of
> service Permissions. I guess this show up only when
> the service is properly enabled for the repository in
> question.
This should be the case...
Three steps:
- Check all prerequisities of the document mentioned above (if you have not already done so).
- If the problem persists, check error log as well as knowledge_managament log.
- If there are relevant entries, report. If not, open an OSS message.
At the moment, I think more can't be done / advised?!
Hope it helps
Detlev

Service Cofirmation not replicated in Backend system

Hi All,
When we are confirming service good in the SRM browser it is not being replicated in R/3, WS10400010 is being triggered and completed successfully but the data is not replicated in R/3.
I have checked the successful one and it has system status I1017,I1018 but the one which failed to replicate in R/3 has no statuses I1017 and I1018.
Can any one let me know what is the actual problem and what needs to be checked in R/3 whether the data is flowing or not.
Its urgent and every reply is hoghly appreciated.
Regards,
Ravi G

Hi Ravi,
Check in SLG1 & RZ20 (Application Monitors) for any error logs and detailed error description.
Check whether the programme BBP_GET_STATUS_2 is running properly in the back groung or not in the back ground.
In case the IDOC is getting failed check for the reason for failure of the IDOC in back end R/3 using WE05 / WE02 txn.
Please make the desired changes as per the IDOC failure message and reprocess the IDOC.
Hope this will make you clear about the issue. Clarifications are welcome.
Do update us for further help.
Award points for helpful answers.
Rgds,
Teja

Why is iCloud is not listed in my System Preferences?

Apple instructions for setting up iCloud direct me to access it in my Systems Preferences under Internet and Wireless, but it isn't listed there.

Because your OSX version is 10.6.8 Snow Leopard and iCloud needs at least 10.7.5 Lion (or later of course).
See also: https://support.apple.com/kb/HT4759

Service interface not listed in business system in ID.

Similar Messages

Maybe you are looking for