Service Item and Standard item to be copie

Friends,
We are trying to configure service Item (without Delivery ) with a standard Item for our sales orders.
I have used TAN for Std.Item and TAD for services.
Business need:
Products purchased by our customers need personalization for every product. Some customers may not need personalization.
We want the Design Charges ( just a service ) + Product (std.Item) to be captured in Sales order. But, the service Item should not be copied to Delivery..and after subsequent TO and PGI (for Std.Item), when we get to the Billing with ref to the Delivery just made, we should see both Design Charge (Service Item ) and the Std.Item in the Billing doc.
I tried to set the copy controls for the service item from SO to Billing (with out delivery)...but I am not able to see both the Items in one Billing document.
I could get this when the Desing charge is passed through the Delivery document (although not relevent for delivery and TO)..then to Billing.
But the business needs the Design charge to be shown in Billing documents only and not in Delivery.
Do we have a way to do so? OR>LF (without Designcharge)->F2 (with item and Design charge)..how to achieve this.
The Item categories used are TAN and TAD.
Need your definate help.
Thanks
Ravi

It is not possible to get Service Item w/o delivery in to Invoice along with the the delivery item..unless the Service item is configured as item relevant to delivery.

Similar Messages

Is it possible to bill together a FERT material and service item.

Hi All,
I have request from the user where in they want to bill together a service and fert material.
Scenario.
1. Sales order creation with material one FERT and other service ITEM.
2. Delivery creation for both item. Stock should be reduced for FERT item and system should not ask for stock for service item.
Single PGI document for both.
3, Single billing for both FERT and service item.
Please confirm is it possible to implement.
Any guidance is highly welcomed.
Regards
Jalaj

2. Delivery creation for both item. Stock should be reduced for FERT item and system should not ask for stock for service item.
Single PGI document for both.
Yes delivery will be created for both FERT and Text items and system would reduce the stock to FERT item only not for Text item(TATX) because at the time creating sales order it self for text line item qty would be Zero so at the time of PGI system will not reduce any qty.this is standard only.
Please note for text items we don't maintain the material master and order qty also you can observe is in grey mode.
And coming into billing why you want bill the text item? usually in standard for text items the pricing is not relevant this you can observe in the definition of TATX(VOV7).
And finally you can combine the both the materials in single billing.
1. Goto VF04 select order related billing and delivery related billing or
2. by entering vf01 enter the delivery and order and try to save it.
Please check the above and let me know your results.
thanks,
Srinu.

Process for adding no cost item to Service Order and show on invoice SM

We want to put a non-cost item on a service order without having to put a $.01 value on them. We might purchase a box of bolts at a hardware store with a purchasing card and just expense items. We add the bolt as a line item on our Service Order to charge customer some amount. But we do not have a cost on the item. To put a bogus $.01 cost value on the item and have it show up in COPA and in the GL makes the data incorrect. It is our understanding that to pass an item on the service order through process related billing to the invoice it has to have a cost or it does not show up on invoice.   How do other folks deal with putting a no cost item on service order?

Hi,
I have tried everything, still its not working.
First I tried creating a Service Ticket and adding the line item at one go.Then I was getting status error:
System error: An attempt has been made to create a status object
with the object number DE20131333937DF180C5001372F65D25. However,
a status object with this number exists already.
Code sample given below:
CALL FUNCTION 'BAPI_BUSPROCESSND_CREATEMULTI'
    TABLES
      header          = itab_header
      item            = itab_item
      partner         = itab_partner
      status          = itab_status
      text            = itab_text
      return          = itab_return
      service_os      = itab_service
      input_fields    = itab_input_fields
      created_process = itab_created_process.
Then I tried creating a service ticket first and adding item later.Then there was no dump, but item details are not getting saved. Code sample given below:
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
    EXPORTING
      it_product_i      = lt_product_i
    CHANGING
      ct_orderadm_i     = lt_orderadm_i
      ct_input_fields   = lt_input_fields
    EXCEPTIONS
      error_occurred    = 1
      document_locked   = 2
      no_change_allowed = 3
      no_authority      = 4
      OTHERS            = 5.
Can anybody please help me out on this? What is the correct approach?
Thanks and Regards,
Rohit

What is the Merits and De-Merits if we choose Item or Service Items.

Hi,
Please guide me what are the merits and de merits if we choose Items or Service Items when we are adding AR Invoice under AR Modules.we are using SAP B1 43.
Item: Item to create a sales document for items defined in the Inventory module
Service Item:Service to create a sales document for a service that has not been defined as an Item in SAP Business One, such as a one-time consultation. please share your points.
Regds,
Samapth Kumar Devunuri.

Hi Samapth,
It is clear based on the definition you known. Depending on you business process, the more of the item types, the better. That is because you can do all kinds of analysis and breakdown the accounting details easily. Service types are usually only applied to one time or small amount sales.
Thanks,
Gordon

How to create service items and sales order for service contracts.

Hi,
I have created item using Purchased Item template and one more item(service item) using service /warranty program template. Then I have used these items to create sales order with service item in it and closed that order , but Iam not getting this order in service contracts. Is this right way to create sales order for service items. I
item name:- personal_computer
copied from purchased order template. service is enabled and install base is checked and enable service coverage is enabled.
item name:- service_item
copied from service /warranty program template
service is selected to inactive,
service type: service
duration: 1 year
template: Gold
and saved the item.
Then I have used these two items in sales order for service contracts. But that sales order is not hitting in service contracts. Is there any error with item creation.
Thanks,
Bharat G.

Following SAP Notes to be referred for Service Tax:
1. 778976 u2013 Service Tax and Ecess on Service Tax
2. 1032265 - SEcess on Service Tax
Regards
AK

Stacked and standard item groups

Hi,
Can anyone give a clue if the following problem can be solved?
I have a table with many columns which I want to display on a single form with multiple tab-canvases. And on each tab-canvas I want to use item groups (two side-by side!).
I managed to generate this only partly by using stacked item groups for each tab-canvas and item groups within these stacked item groups. But the item groups are all placed beneath each other! I can not find a way to control the layout-generation. It looks like the forms-generator does not use the tabulation preferences.
I am using Designer 6 (6.0.3.10) and Forms 6i (6.0.8.10).
Thanks.
null

It is not possible to get Service Item w/o delivery in to Invoice along with the the delivery item..unless the Service item is configured as item relevant to delivery.

Service tax and cess on freight for inventorised items

Hi all,
There is a scenario where service tax and cess is charged on freight line items in a PO for inventorised material. This had been incorporated in pricing procedure accordingly. But while doing a MIGO it is found that the service tax and cess are charged on the materials. This should not be charged to the material rather at the time of MIRO it has to be posted to a receivable account.
Can anyone suggest what configuration is required for this.
thanks in advance
asbin

Hi Ponraj,
i would like to know the solution in detailed. As Per my client requirement, i have separated VAT amount and posting into separated G/L account. but my problem is i have to pay tax on freight amount to government. The taxes on the freight will be different. since 25% from the freight amount is taxable. so 25% from the freight amount i have to consider and on that i have to charge 2% E.Cess and 1% secondary higher E.cess.
how could i configure this issue in SAP?
please help me on this issue.
regards
Appu

Service item Category and pricing relevance

In regular sales contexts Item categories can be customized for Pricing relevance and billing relevance.In Service context there are no such settings for Pricing and billing relevance.
The only settings for service item category in service context are the ones for resource planning, Confirmation, costing, service type and valuation type and counter managemnet etc.
How does Pricing work in the case of a Service order with item category Ex. SRVP.
Can some one answer this question?
Regards

Hi Rani,
What you can do is assign Business Transaction Category
SALES (BUS2000115) into your Service Item Category.
To do this, just go into Item Category maintenence,
select your Item Category (service), then click on
Assigment Business Transaction Category (located on left
tree menu). Currently, may be you only see BUS2000116 assign to it, then add/create new entry and select BUS2000115.
Now you have this Pricing Relevance setting.
Hope this help.
Cheers,
Gun.

CS11 &CS12- Moving Price and standard price not appering for items

Dear Gurus,
CS11 &CS12- Moving Price and standard price not appering for items.
is it a bug for my system alone\.
or a bug overall in SAP itself.
Pls advise.
Siva

Dear Siva,
Its the standard functionality of SAP.
You will not get any cost related data in the reports like CS11,CS12,CS13.
You can try CK13N(which shows the components of the BOM along with the cost) or else CK86_99.
At Functional module level execute this one CS_BOM_EXPL_MAT_V2 and ensure X is included for the
input field MBWLS.
And also check these SAP notes 177006 and 686509.
Check and revert back.
Regards
Mangalraj.S

Service Item and Delivered Item created by a kit (Lumf)

Is there a way to get a Delivered item - TAN and a Service Item TAD on one Order by entering a Kit Item LUMF
It creates the parent item as a TAP and both components as TAN. I have the second component flagged as N non-stock in the BOM.
Thanks
Mark

It is not possible to get Service Item w/o delivery in to Invoice along with the the delivery item..unless the Service item is configured as item relevant to delivery.

How to consolidate service item and finished product into a billing doc.

There are two items in my sales order.
one is the finished product, therefore I need to do delivery and billing.
another one is a service item, so i don't need to do the delivery but billing.
When I do the billing, the system split two billing document for this sales order.
How can I consolidate this two items into a billing document? and that is normal invoice for business.

Please search the forum before posting questions as similar questions are answered before, see for example Multiple item categories on one order and Billing Document
If this does not help resolve, then be specific to provide where the issue happens.
Regards,
If you solve by yourself, can you provide the details?
Edited by: Shiva Ram on Nov 12, 2011 8:57 PM

Delta update for Cube : 0CRM_PRI - Service Orders and Confirmations: Item

Dear experts,
For Cube : 0CRM_PRI - Service Orders and Confirmations: Item
Source data is from Two ODS
1. Confirmations (Item Data) : 0CRM_CNFI and
2. Service Orders: Item Data : 0CRM_PROI
I have done Init upload to this cube from both this ODS.
I am not getting delta option to this.
When I am trying update Delta after init from ODS message is No new deltas in DataStore object 0CRM_PROI for update. No delta option available . It is showing Initial and Full Update option only.
How i can initiate delta option for this Cube ? Please update us.
Thanks in advance.
Regards,

Hi,
you can use DTP's to laod data from ODS to cube .. it will take deltas ..
With a data transfer process, you can transfer data either in full extraction mode or in delta mode. In full mode, the entire dataset of the source is transferred to the target; in delta mode, only the data that was posted to the source since the last data transfer is transferred. The data transfer process controls delta handling and therefore allows you to fill several targets with different deltas from one source. With a data transfer process, you do not need to explicitly initialize the delta method as you do when copying data with an InfoPackage.
or you can create a sepeate Ip for delta apart form full and init .. that will laod delat data in cube ..
Regards,
shikha

Ability to modify Account Assignment Category for Service Item Categories

Dear experts,
Our customer has a requirement to modify the account assignment category when the item category is set to "D" services on a PR and PO line item. This scenario is specific to indirect procurement scenarios in SAP ECC 6.0 MM.
End users may potentially create a PR against a service item category with an incorrect account assignment category. These PRs are created using free form text. No service master exists in these scenarios. During the approval process or during PO creation, an approver or the buyer may need to correct the account assignment category. The account assignment category is "display" only and cannot be modified when the item category is set to "D". The user must delete the line item and create a new line item with the correct account assignment category. The copy function cannot be used because the account assignment copies from the existing line and cannot be modified.
Any recommendations to this issue using standard SAP configuration solutions?
Thanks,
Jennifer

Item Category to Account Assignment Category combination is already configured. For Service Item Category, we have three account assignment categories configured. All three categories are valid in different scenarios. Sometimes the user selects the incorrect account assignment category (out of the three available) depending on the business scenario. PT9F configuration is already set to Account Assignment category "optional". However, the account assignment category still cannot be modified on the PR when the item category is "D" service.
Any other recommendations?

Shopping Cart with Service Items

Hello SRM Experts,
We are implementing SRM40 in Extended Classic Mode.
When we create SRM PO using Service Item Category with multiple items with different Account Assignment Category, it copies the PO in R/3
grouping together all services belonging to an item of a purchasing document with its own short text and displaying SRM PO line items as Individual Service Lines.
I was told this is standard functionality.
Is it possible through BADI enhancement without modifying SAP Code that i can copy R/3 PO same as SRM PO Line Items.
Thanks in Advance,
Jay

HI Jaysankar
we were facing the same problem for services taking into line 10 of the PO all the line items of a single SC.
After that we switched all the services as materials so that the product type becomes 01.
we have not use any badi can you pls elobarte on how u r using badi
1 which BAdi are u using.
2 When u r switching 01 in badi,
regards,
Nimish sheht
2

Transfer of tax indicator to purchase order for service items in shopping cart

Hi all.
I have a problem with the tax indicator in the shopping carts and in the backend purchase orders for service items. If I create a shopping cart with service items with different tax indicators, the backend purchase order have a unique item including all the services. So, all the PO items are under one tax indicator while in the shopping cart there is more than one indicator. I mean, the PO is not correctly replicated with the information of the SC.
Example: shopping cart in SRM with 3 items, tax codes: V1, V2, V1. The standard code transfers the information to the backend, and creates a purchase order with an unique item with the 3 services under tax code V1. So, the second service is not under the correct tax code, and will be wrongly invoiced.
We have debugged all the code of the process, and we think it is a standard bug. When you replicate a PO in the backend from a SC in SRM, have you experienced this behaviour, or the service items are grouped in different PO items each one with the correct tax indicator?
Thanks in advance.

Hi again...
I forgot to mention that we have found and applied the note 1822107 (Purchase order: wrong tax code for PO with 2 service items), that fits exactly to our problem. But after testing, it doesn't work.
Regards.

Service Item and Standard item to be copie

Similar Messages

Maybe you are looking for