Service keeps repeating line training.

Hi all,
For some reason my line keeps going into line training mode.
I was upgraded to ADSL2+ on 9 Aug 2010. Line training, as expected, completed after 10 days and my line settled to an acceptable 15Mb/1Mb Down/Up. Fantastic.
I noticed during line training it was operating in Fastpath mode, and once training was complete it switched to Interleave. Once again as expected and no problem there.
Five days after line training comleted I noticed that my line had gone back into Fastpath mode and the typical daily change in speed and noise margin experienced during line training seemed to be happening again. Once again I watched it go through it's 10 day cycle and finally settle to 15Mb/1Mb Down/Up and change back to Interleave. Ok, just an anomaly I thought, service is still fantastic, not worried.
Today, about 5/6 days after the last line training phase I noticed my line has once again gone back to Fastpath mode and the typical pattern of line training seems to have started again.
Is this going to be a neverending cycle? I hope not, as the line training phase is not the most stable situation to be in, as the loss of synchronisation causes me to have to manually reconnect via my router in order to pick up the new IP address.
Anyone know what could cause this repeated cycle of line training?
My line attenuation (14db Down / 3 db Up) and noise margin (3db Down / 6 db Up) seem to be excellent and are not a problem.
Any help would be appreciated. Thank you.

Hi Campotech,
It's strange that your interleaving mode keeps changing - if you could drop me an email I'll see what's going on. Click on my profile to get our address, I'll need your forum username and BT account or telephone number.
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

  • Does anyone ever get a human being when calling prepaid support at 888-294-6804?an stay on the line, but it just keeps repeating the menu options and eventually hangs up on me.  That is really irrita

    Does anyone ever get a human being when calling prepaid support at 888-294-6804? It tells me call volumes are higher then normal and I can stay on the line, but it just keeps repeating the menu options and eventually hangs up on me.  That is really irritating!!  I'd at least like the option to wait on hold.  I guess I should have listened to the warnings about prepaid support before switching to prepaid last week.
    The reason I'm calling support is I'd like to know when I will be getting the extra 500MB of data when signing up for auto pay.  This is one of the reasons I switched to a 4G Allset plan.  I signed up for auto pay promptly after setting up my online account when I switched from post paid to pre paid on Thursday July 17, 2014.

        I'm sorry you are having trouble reaching a representative, mhaider60. When calling our Prepaid department you can reach a representative using the following number and prompts: 888-294-6804 when prompted, select 4, 6, and 4 to reach a representative.
    AndreaS_VZW
    Follow us on Twitter @VZWSupport

  • Repeat Line item prints on every new page of smart form of Service PO

    Dear Sir,
    I am  facing following Problem & need abaper help.
    example:-
    PO type is Service
    Line item 10.  Transportation  1  AU
      under this activities
              01.  Transportaion by Tree wheeler 3 Rs/ KM
              02.  Transportaion by Four wheeler 8 Rs/ KM
              03.  Transportaion by Heavy vehical 10 Rs/ KM
    Line item 20      Errection     1 AU
    Sub services are,
            01. Errection of Boiler   200 RS/Hr
    Like this way
    Now I am seeing Print Preeview
    Suppose line item 20 come in second page , in this case system copies sub services of firs line item
    example : - system shows line item 20 in second page as shown below which is wrong.
    Line item 20      Errection     1 AU
               01.  Transportaion by Tree wheeler 3 Rs/ KM
              02.  Transportaion by Four wheeler 8 Rs/ KM
              03.  Transportaion by Heavy vehical 10 Rs/ KM
    Pls, suggest where I need to change.
    Regards,
    Ravi

    hi ,
    i think you are not clearing the Barcode variable once it has printed.
    try declaring the variable like this in smartform,
    BARCODE     TYPE     CHAR24
    when one loop excecutes .and end of loop  in command line clear this variable.
    thanks & regards,
    kat.

  • ITunes Match keeps repeating and Sonos Play 5!

    So this note has two pieces to it, one related to iTunes Match and the other is Sonos Play 5.   First an observation about the iTunes Match repeating problem.  I wanted to start using iTunes Match for a couple of reasons so I started to run it. It went through Step 1 and Step 2, started Step 3, stopped and restarted on Step 1. 
    So I was reading trying to find a solution in the Apple Support Community.  Some suggested that there was a corrupted song in the library so I went back to watch to see if I could catch when it left Step 3 to go back to Step 1. I was not really able to see exactly were it was reverting back to Step 1. 
    I then discovered ajlewis1851 note about reset Match, Store and the computer (https://discussions.apple.com/message/20530276#20530276)
    I also discovered a song that was not in my library so I deleted that from the library as well.  Neither of these seemed to work and it was back repeating itself.
    I left Match running while I was doing more searching and I discovered the thread about gating the upload speed as the upload speed might be the problem.  Well I spent a long time trying to figure out how to slow my Airport Extreme Base Station down and then I noticed that Match was uploading between 2-15 files before it would kick back to the beginning and the total number of files to be uploaded was slowly decreasing. 
    Low and behold after quite some time, Match finally finished and said it was done!  This has to be some serious bug in Match, but eventually it got done.  Not sure whether the two steps before helped or not.
    Now to the beginning of the story.  I started down this path because I was setting up a new iPod Touch to serve as controller for my new Sonos Play 5 system.  Everything seemed to work fine with Pandora and I was very excited. Synced a few playlist from my iTunes library and for many of the songs there was the dreaded ‘unplayable icon”-circle with a line through it!  Did some additional searching and discovered that the iPod Touch to Sonos Play 5 was only possible with DRM songs.
    This is an aside.  It is necessary to place this discovery against my experience of playing my iPod thru a Sonos iPod Dock without having to worry about the DRM status of the music.  My disappointment was nearly overwhelming.
    But Sonos recommended a strategy of iTunes Match to remove the DRM from the songs in my library.  Hence, my need for iTunes Match from the beginning of this story.  But this is not a very clean solution.  Even after one has done the iTunes Match, it is necessary to find all of the ‘Protected AAC audio files’ in your library, delete them and then download the ‘Purchased AAC audio files’ from the cloud.  (https://sonos.custhelp.com/app/answers/detail/a_id/626) and Apples directions (http://support.apple.com/kb/ht1711)
    There are of tricks in doing this ‘Protected’ to ‘Purchased’ transition.  When you select Music in your library, and then right click on the top bar above the music you can select additional columns to be shown. Select ‘Kind’ and you can see which music is protected vs purchased.  You can sort this column, thus bring all of the ‘Protected’ files together, select them all and with one right click delete them!  (I very very strongly recommended you have a couple of backups of your library, just in case and there is a small box in the dialogue about deleting them from the Cloud as well---MAKE SURE THIS BOX IS NOT SELECTED). Much to my delight, in the ‘Cloud’ column, you are presented with the choice to download the ‘Cloud’ version (now DRM free).  As best as I can tell, one has to download each song from the Cloud individually. My fingers were very tired after millions of clicks.  I did a few at a time so it took me the better part of a day to accomplish. 
    I was very excited because I now had DRM free music in my library (I figured this would solve the problem).  I connected the iPod Touch to the library, choose not to sync my playlist so all the playlists from the iPod Touch were removed and then reselected the playlists of interest and had them placed back on the iPod.  I ejected the iPod and tested the playlist on the Sonos.  Much to my surprise, the unplayable songs were still unplayable!!! 
    I deleted the Sonos App and reinstalled it (Did not work). 
    I deleted the playlist from the iPod Touch, and resync it to my library (You really don’t want to do this as it also deleted the playlist from my library!)  Fortunately, I had one of those backups.
    I then sync another playlist to the iPod Touch.  This second playlist was the complete album from which two songs were placed in the original problem playlist.  Much to my surprise, all of the songs from the album were fine, EXCEPT, the two songs that were unplayable in the original playlist.
    I finally came to the conclusion that something had been stored on the iPod during the initial sync with the DRM containing music that prevented the non-DRM music from working properly.  With a deep breath, and only after I disable the iPod Touch connection to iCloud (in a couple different places), I then went to Settings > General > Reset > Erase All Content and Settings and ran it to restore original factory settings. It was plugged into a power source.
    After setting the iPod Touch up again, I reconnected it to my iTunes library and moved the problem playlist over that contained several unplayable songs.  IT WORKED!  All the songs were playable.
    LESSONS: 
    1. If iTunes Match keeps repeating steps 1 and 2 watch carefully to see if the number of songs to be processed is changing for the better.  If yes, at least in my situation, it completed the process, but it took much longer than I believe it should have.
    2. My suspicion is that if you have installed DRM protected songs on an iPod Touch, the Sonos recommended solution will not work as stated.  Interestingly, it did seem work on my iPad and 4G iPhone. 
    Addendum: I have discovered a few songs where the Sonos recommended solution did not work on the iPad and iPhone as well.  Several are from the Madonna.

    Well.....It is now working....... Including converting locked tracks located on the IPad library into unlocked 256kbps tracks playable by Sonos...
    Used these steps:
    Signed up for ITunes Match using ITunes on a Windows PC
    Let Match do it's thing with 700 or so tracks
    Followed the procedure in the link above to create a smart playlist of tracks with bit rates less than 256kbps
    Using the smart playlist as a guide, I deleted or download tracks not appearing in Sonos on the PC. Then, refreshed the Sonos music library and confirmed these tracks now available and playable by Sonos
    On the IPad, for tracks that were grayed out in Sonos, I deleted and re-downloaded the tracks using the Music app (swipe right to left on a track to delete it)... then got into Sonos on the IPad to confirm the tracks no longer grayed out.
    So... I'm now happy.... I like the Sono system of WIFI streaming which is very flexible and produces decent sound quality, but did not realize until after buying the Sonos bridge and two Sonos speakers that older ITunes songs would not play in Sonos due to DRM locking.  So, will now work through the library of locked tracks converting and re-downloading.
    Thanks again for the pointers on this question.

  • Mail Service Keeps Stopping For No Reason

    Hi There everyone. Over the past few days my Mail Service keeps stopping. Not giving any particular error, the only clue is this log message:-
    Jan 6 13:12:39 server master[371]: exiting on SIGTERM/SIGINT
    Is that helpful? I can start the service again and it seems OK... for a few hours then it stops again.
    I have tried, reconstructing and repairing until I am blue in the face. Any other suggestions please? Thanks in advance.

    I have just had the same thing happend again today with this in the log file:-
    Jan 12 08:52:53 server imap[1413]: AOD: user options: no lookup required for: paul
    Jan 12 08:52:53 server imap[1413]: login: localhost [::1] paul plaintext user logged in
    Jan 12 08:52:53 server imap[1413]: quota set to "unlimited" for mailbox user.paul
    Jan 12 08:52:53 server imap[1413]: open: user paul opened INBOX
    Jan 12 08:52:53 server imap[1413]: accepted connection
    Jan 12 08:52:53 server imap[1413]: AOD: user options: no lookup required for: paul
    Jan 12 08:52:53 server imap[1413]: login: localhost [::1] paul plaintext user logged in
    Jan 12 08:52:53 server imap[1413]: quota set to "unlimited" for mailbox user.paul
    Jan 12 08:52:53 server imap[1413]: open: user paul opened INBOX
    Jan 12 08:52:53: --- last message repeated 2 times ---
    Jan 12 08:52:53 server imap[1413]: SQUAT failed to open index file
    Jan 12 08:52:53 server imap[1413]: SQUAT failed
    Jan 12 08:53:07 server master[367]: process 1399 exited, status 0
    Jan 12 08:54:21 server master[367]: process 1413 exited, status 0
    Jan 12 09:02:07 server master[51]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:02:07 server master[51]: process started
    Jan 12 09:02:08 server master[177]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:02:12 server ctl_cyrusdb[177]: verifying cyrus databases
    Jan 12 09:02:14 server ctl_cyrusdb[177]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 2 seconds
    Jan 12 09:02:16 server ctl_cyrusdb[177]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 2 seconds
    Jan 12 09:02:28 server master[261]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:02:29 server master[261]: process started
    Jan 12 09:02:29 server master[262]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:03:42 server master[335]: process started
    Jan 12 09:03:42 server master[337]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:04:00 server ctl_cyrusdb[337]: DBERROR db4: unable to join the environment
    Jan 12 09:04:15 server ctl_cyrusdb[337]: verifying cyrus databases
    Jan 12 09:04:16 server ctl_cyrusdb[337]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 1 second
    Jan 12 09:04:16 server ctl_cyrusdb[337]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 0 seconds
    Jan 12 09:04:41 server master[352]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:04:41 server master[352]: process started
    Jan 12 09:04:41 server master[354]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:04:51 server ctl_cyrusdb[354]: verifying cyrus databases
    Jan 12 09:04:51 server ctl_cyrusdb[354]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 0 seconds
    Jan 12 09:04:52 server ctl_cyrusdb[354]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 1 second
    Jan 12 09:05:17 server master[387]: process started
    Jan 12 09:05:27 server master[447]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:05:27 server master[447]: process started
    Jan 12 09:05:27 server master[448]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:05:41 server master[451]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:05:41 server master[451]: process started
    Jan 12 09:05:41 server master[452]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:05:59 server ctl_cyrusdb[452]: DBERROR db4: unable to join the environment
    Jan 12 09:06:01 server ctl_cyrusdb[452]: verifying cyrus databases
    Jan 12 09:06:01 server ctl_cyrusdb[452]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 0 seconds
    Jan 12 09:06:02 server ctl_cyrusdb[452]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 1 second
    Jan 12 09:06:21 server master[479]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:06:21 server master[479]: process started
    Jan 12 09:06:21 server master[480]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:06:31 server master[481]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:06:42 server master[483]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:06:43 server master[483]: process started
    Jan 12 09:07:01 server ctl_cyrusdb[485]: DBERROR db4: unable to join the environment
    Jan 12 09:07:02 server ctl_cyrusdb[485]: verifying cyrus databases
    Jan 12 09:07:02 server ctl_cyrusdb[485]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 0 seconds
    Jan 12 09:07:02 server ctl_cyrusdb[485]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 0 seconds
    Jan 12 09:07:28 server ctl_cyrusdb[485]: done verifying cyrus databases
    Jan 12 09:07:28 server master[497]: about to exec /usr/bin/cyrus/bin/idled
    Jan 12 09:07:29 server master[483]: Cyrus POP/IMAP Server v2.3.8 ready for work
    Jan 12 09:07:29 server master[499]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:07:29 server ctl_cyrusdb[499]: checkpointing cyrus databases
    Jan 12 09:07:29 server ctl_cyrusdb[499]: archiving database file: /var/imap/annotations.db
    Jan 12 09:07:29 server ctl_cyrusdb[499]: archiving log file: /var/imap/db/log.0000000001
    Jan 12 09:07:29 server ctl_cyrusdb[499]: archiving database file: /var/imap/mailboxes.db
    Jan 12 09:07:29 server ctl_cyrusdb[499]: archiving log file: /var/imap/db/log.0000000001
    Jan 12 09:07:29: --- last message repeated 1 time ---
    Jan 12 09:07:29 server ctl_cyrusdb[499]: done checkpointing cyrus databases
    Jan 12 09:07:29 server master[483]: process 499 exited, status 0
    Jan 12 09:08:16 server master[512]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:16 server imap[512]: executed
    Jan 12 09:08:16 server imap[512]: accepted connection
    Jan 12 09:08:16 server master[513]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:16 server imap[513]: executed
    Jan 12 09:08:16 server imap[513]: accepted connection
    Jan 12 09:08:17 server imap[512]: login: [172.16.1.99] paul plaintext user logged in
    Jan 12 09:08:17 server imap[512]: quota set to "unlimited" for mailbox user.paul
    Jan 12 09:08:17 server master[514]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:17 server imap[513]: login: [172.16.1.99] florensis CRAM-MD5 User logged in
    Jan 12 09:08:17 server imap[513]: quota set to "unlimited" for mailbox user.florensis
    Jan 12 09:08:17 server master[515]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:17 server imap[515]: executed
    Jan 12 09:08:17 server imap[515]: accepted connection
    Jan 12 09:08:17 server master[516]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:17 server imap[516]: executed
    Jan 12 09:08:17 server imap[516]: accepted connection
    Jan 12 09:08:17 server imap[516]: login: [172.16.1.99] paul plaintext user logged in
    Jan 12 09:08:17 server imap[516]: quota set to "unlimited" for mailbox user.paul
    Jan 12 09:08:17 server imap[515]: login: [172.16.1.99] florensis CRAM-MD5 User logged in
    Jan 12 09:08:17 server imap[515]: quota set to "unlimited" for mailbox user.florensis
    Jan 12 09:08:17 server imap[516]: seen_db: user paul opened /var/imap/user/p/paul.seen
    Jan 12 09:08:17 server imap[516]: open: user paul opened Junk
    Jan 12 09:08:17 server imap[515]: skiplist: recovered /var/imap/user/f/florensis.seen (7 records, 14904 bytes) in 0 seconds
    Jan 12 09:08:17 server imap[515]: seen_db: user florensis opened /var/imap/user/f/florensis.seen
    Jan 12 09:08:17 server imap[516]: SQUAT failed to open index file
    Jan 12 09:08:17 server imap[515]: open: user florensis opened INBOX
    Jan 12 09:08:17 server imap[516]: SQUAT failed
    Jan 12 09:08:18 server master[517]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:18 server imap[517]: executed
    Jan 12 09:08:18 server imap[517]: accepted connection
    Jan 12 09:08:18 server imap[517]: login: [172.16.1.99] florensis CRAM-MD5 User logged in
    Jan 12 09:08:18 server imap[517]: quota set to "unlimited" for mailbox user.florensis
    Jan 12 09:08:18 server master[518]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:18 server imap[518]: executed
    Jan 12 09:08:18 server imap[519]: executed
    Jan 12 09:08:18 server imap[518]: SQUAT failed to open index file
    Jan 12 09:08:18 server imap[518]: SQUAT failed
    Jan 12 09:08:18 server master[520]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:18 server imap[520]: executed
    Jan 12 09:08:18 server imap[520]: accepted connection
    Jan 12 09:08:19 server imap[516]: Expunged 7 messages from user.paul.Junk
    Jan 12 09:08:19 server imap[520]: login: [172.16.1.99] florensis CRAM-MD5 User logged in
    Jan 12 09:08:19 server imap[520]: quota set to "unlimited" for mailbox user.florensis
    Jan 12 09:08:19 server imap[517]: seen_db: user florensis opened /var/imap/user/f/florensis.seen
    Jan 12 09:08:19 server imap[517]: open: user florensis opened Junk
    Jan 12 09:08:19 server imap[517]: SQUAT failed to open index file
    Jan 12 09:08:19 server imap[517]: SQUAT failed
    Jan 12 09:08:19 server imap[519]: seen_db: user florensis opened /var/imap/user/f/florensis.seen
    Jan 12 09:08:19 server imap[519]: open: user florensis opened Apple Mail To Do
    Jan 12 09:08:19 server imap[520]: seen_db: user florensis opened /var/imap/user/f/florensis.seen
    Jan 12 09:08:19 server imap[520]: open: user florensis opened Deleted Messages
    Jan 12 09:08:19 server imap[520]: SQUAT failed to open index file
    Jan 12 09:08:19 server imap[520]: SQUAT failed
    Jan 12 09:08:20 server imap[513]: accepted connection
    Jan 12 09:08:20 server imap[513]: login: [172.16.1.99] paul plaintext user logged in
    Jan 12 09:08:20 server imap[513]: quota set to "unlimited" for mailbox user.paul
    Jan 12 09:08:20 server imap[514]: Expunged 1 messages from user.paul
    Jan 12 09:08:20 server imap[513]: seen_db: user paul opened /var/imap/user/p/paul.seen
    Jan 12 09:08:22 server imap[513]: open: user paul opened Apple Mail To Do
    Jan 12 09:08:22 server imap[516]: open: user paul opened Sent Messages
    Jan 12 09:08:22 server imap[515]: Expunged 1 messages from user.florensis
    Jan 12 09:08:23 server imap[517]: open: user florensis opened Apple Mail To Do
    Jan 12 09:08:23 server imap[518]: open: user paul opened Junk
    Jan 12 09:08:24 server imap[518]: Expunged 1 messages from user.paul.Junk
    Does this help? It then cleared itself??

  • Logger Service keeps shutting down and restarting

    Hello,
    I have upgraded my lab UCCE call center to v9.0
    I have a simplexed environment
    Ever since, the logger service keeps shutting down and restarting.
    Recently, the node manager issued an error message and shut down the server
    I tried to check some logs but I point out the problem, there are errors in different processes.
    Attached are the logs.

    Hi,
    if the NM tries to reload the server, it indicates a Problem (capital inteded).
    Indeed, there's something interesting going on:
    08:29:11:822 la-rpl Trace: Starting Recovery Key for Admin table is 6717118506000.0 
    08:29:11:822 la-rpl Trace: The largestkey = 7201232308043.0 >= startkey = 6717118506000.0  
    08:29:11:823 la-rpl Trace: To correct this problem: Stop logger service. Use ICMDBA tool to sync configuration data from its partner logger database. Restart logger service. 
    08:29:11:823 la-rpl Fail: Assertion failed: largestkey < startkey.  File: ICRDB.CPP.  Line 742
    08:29:11:860 la-rpl Trace: CExceptionHandlerEx::GenerateMiniDump -- A Mini Dump File is available at logfiles\replication.exe_20130523082911824.mdmp 
    08:29:12:074 la-rpl Unhandled Exception: Exception code: 80000003 BREAKPOINTFault address:  754A3219 01:00012219 C:\Windows\syswow64\KERNELBASE.dllRegisters:EAX:00000000EBX:00000000ECX:00001890EDX:E1043F00ESI:015F8AB0EDI:00000005CS:EIP:0023:754A3219SS:ESP:002B:003CE2D8  EBP:003CE2E0DS:002B  ES:002B  FS:0053  GS:002BFlags:00000246Call stack:Address   Frame754A3219  003CE2E0  DebugBreak+26EB1459C  003CE2EC  EMSAbortProcess+C6EB1ACD1  003CF7F8  EMSReportCommon+1A16EB1ADBB  003CF818  EMSFailMessage+2B013BBE5A  003CF8A8  ICRDb::ICRDb+44A013B2FE2  003CF9B8  main+582015D96C2  003CF9FC  NtCurrentTeb+174767333AA  003CFA08  BaseThreadInitThunk+1277449EF2  003CFA48  RtlInitializeExceptionChain+6377449EC5  003CFA60  RtlInitializeExceptionChain+36
    The short version: configuration data is corrupt.
    The longer version: the above message in red informs about the result of a sanity check. Each configuration change creates a new row in one of the tables holding the config info, and each row contains a RecoveryKey which is usually a large number incremented by the insertion. The error message says the largest key (= last key) contains a value that is lower than the first key. Naturally, this is something to consider for a lonely philosopher, but the rigid world of Cisco ICM does not allow metaphysical phenomena. Lower numbers are supposed to be lower than higher numbers.
    This, of course, raises an exception and the Logger service restarts. If there are too many restarts, the Node Manager kicks in and restarts the machine - this is just a mechanism that prevents a larger extent of data corruption.
    Now, if there's an other side Logger - fine, as the error message suggests, you can initiate manual replication (provided the other Logger database contains valid information).
    Unfortunately, as you have written, this is a side A only environment. This may mean:
    - accepting the situation, stopping ICM, throwing out the logger database, recreating it and reinstalling the Logger service,
    - poking around in various tables to check what may be saved - this may mean the beginning of an adventure.
    G.

  • How to keep last line together with table?

    Hi guys,
    I am new to Reports , so please excuse me for probably primitive question.
    I am creating consolidated invoices report consisting of invoice date + 2 last lines of company signature like Yours, XXYYY Ltd.
    Depending on number of lines in invoice data it is possible that only these 2 signature lines are printed on last page.
    How to force keeping them together with invoice data?
    Thanks in advance,
    Asnate

    Hi,
    If you have repeating Invoice lines, and they are filling up your page, then there is no other option but to orphan the "Yours, XXYYY Ltd" onto another page.
    Somethings you can do increase the amount of space on your page is decrease the size of your top and bottom margins, and also make sure you have no excess whitespace either in your template or within your placeholders.
    Unfortunately, anything that is displayed after a table of repeating lines, where there is no limit to the number of lines, is susceptable to being orphaned, as there is no guarantee that it will fit onto the page.
    Hope this helps,
    Cj

  • Why do i keep repeating install of java for OS X 2013-005?

    why do i keep repeating install of java for OS X 2013-005.  When i restart my mbp it asks me to reinstall.  My unit is 15-inch, Mid 2012

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ install.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • File Sharing Service keeps crashing Error Reading Settings, File Sharing Service keeps crashing Error Reading Settings

    File sharing service keeps popping up with the error message An error occurred on the server while processing a command.  This error occurred while processing a command of type 'getConnectedUsers' in plug-in 'servermgr_afp'.
    I have tried multiple solutions on this site, unloading afp and restarting it, restarting postgres.  The file sharing tab will show up for a few seconds on the server.app config page then once someone tries to access any of the shared volumes on there, the event log shows it crashing instantly.  Error in console:
    The server '127.0.0.1' reported an error while processing a command of type 'getConnectedUsers' in plug-in: 'servermgr_afp'.  Error: Error Domain=XSActionErrorDomain Code=0 "SETTING_NOT_FOUND_ERR" UserInfo=0x7ffe6a835060 {NSLocalizedDescription=SETTING_NOT_FOUND_ERR}
    Also I get the error com.apple.launchd: (com.apple.collabd.notifications[7520]) Exited with code 1 then always followed by Throttling respawn: Will start in 10 seconds and this happens every 10 seconds without fail.

    I have started getting this error this morning:
    This error occurred while processing a command of type 'getConnectedUsers' in plug-in 'servermgr_afp'.
    Using Server 2.2.2; MacMini running OS X 10.8.5, 2 GHz Core i7 with 8 GB RAM attached to a 12TB Pegasus RAID.
    When the error appears, my users cease to be able to access file shares.
    Often, just before the error occurs, my users experience substantial slow down in the Finder's responsiveness when manipulating files on those shares.
    Restarting the Server App will produce one of several results
    1. fix the problem (rarely)
    2. fail to connect to server
    3. connect to server but not get all services running.
    The system itself resists a full shutdown, hanging at the grayish-white screen (not spinning wheel or cog or apple logo).
    I wish there was some known fix for this.

  • When i go to buy an app on my ipod touch, i click the buy button then the install button and it just keeps repeating itself then dissappears, why is this?

    when i go to buy an app on my ipod touch, i click the buy button then the install button and it just keeps repeating itself then dissappears, why is this?     help me please, i cant download no apps.

    If  you have iOS 3.1.3 then it is an Apple problem.

  • Apple mobile device service keeps crashes

    Hi,
    Does anyone else have this problem?
    Anytime I connect my phone to itunes, apple mobile device service keeps crashing.
    I have tried disabling all anti virus/spyware/firewall settings, uninstalled and re-installed itunes and apple mobile support but still no luck,
    Thanks,
    Colm

    If your iphone shows up as a camera in device manager check out this link.
    http://support.apple.com/kb/TS1500

  • TS1292 I bought a 4 pack of $25 Itunes gift cards and only 2 will activate.  For the second two it just keeps asking for my login. No error message just keeps repeating the login

    I bought a 4 pack of $25 Itunes gift cards and only 2 will activate.  For the second two it just keeps asking for my login. No error message just keeps repeating the login.  Is there any way to fix this or did I just lose $50

    Report this here:
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • ITunes keep repeating a song in my playlist.  The repeat icon is no longer on the upper right hand side

    iTunes keep repeating a song in my playlist on my iphone (4 I thnk).  The repeat icon is no longer on the upper right hand sideiTunes keep repeating a song in my playlist.  The repeat icon is no longer on the upper right hand side

    I looked under file but I couldn't find the "Genius & Playlist" option. I also looked under the other options on the top left side but I couldn't find it there either. And all "Genius suggestions" does for me is show similar songs already purchased in my library. It doesn't show me anything new that I haven't purchased.

  • Reporting services keep failing on SCCM 2012 SP1

    I have SCCM 2012 SP1 install with SSRS 2012 install on same server 2008 R2 server.
    Reporting services keep failing with the following message when trying to START the service from the Reporting Services Configuration Manager Console
    System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed.
       at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout)
       at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
    Thx,
    Joe
    Thx, Joe

    Good advice Garth, but I have opened over 5 cases to try to resolve this and several other issues with my troublesome SCOM 2012 SP1 upgrade. That is why I am also sending it to the community in hope they can provide assistance.
    CSS will only work on one specific issue and in most cases these are targeted bandaid fixes that DO NOT address the underlying or related issues. I a left to opening many tickets and still floundering with a unreliable product.
    It seems to only be with System Center. All other products by Microsoft seem to be reliable and predicable and are easily supported using break fix support model of the current MS teams.
    It is SQL (SSRS) that controls subscriptions not CM12. CM12 only leverages the APIs provided by SQL (SSRS).
    I hate to say this but Why do you think this problem has anything to do with CM12?
    If CSS tell you to re-create the subscription and the problem re-occurs then I would re-open the ticket and tell them that the problem is NOT fixed and to continue working on it.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Why does playlist on iPod keep repeating and repeating even though play count rule is 1

    Hello, everyone!
    I have a smart playlist of about 100 songs.  The play count rule is set to play songs with a play count of less than 1.  A few days ago, I reset all of the songs play count to 0.  If you ask me, the way I have it set up, when the iPod is playing with my headphones on, the iPod should automatically update each songs play count to 1 after each song plays.  After I have listened to all 100 songs, the playlist on the iPod should be empty.  The reason is is because since each song was updated from their play count of 0 to 1 after each one played the play count rule in the playlist should show no songs in the playlist.  Like I said before, the rule says to play any songs with a play count of less than 1.  Since all of the play count of the 100 songs are now 1 and not less than 1, the playlist should be empty.
    The problem is, when I'm listening to my iPod and the 100 songs have played, the playlist is not empty.  It just keeps repeating songs and it will never stop.  When I go to iTunes, the songs are randomly with play counts of 3 or 2 or 1 or however many times they have been repeated.
    Does anyone know why this is?

    The reason the songs don't delete themselves after playing from the playlist on the iPod is because your iPod is not smart enough to do that. It's only when you re-sync your iPod to your iTunes library does the smart playlist in your iTunes library delete the played songs. Then the playlist on your iPod will adjust to the number left unplayed in that playlist.
    So as long as you don't sync back to your library the number of songs in that playlist will never reduce to zero.
    CDJunkie

Maybe you are looking for