Service long text not copied in PO print preview

Hi,
I have maintained Long text while creating Service master...Now when i am creating PO for that service...In the Item table under Service text coloumn , if i am clicking on it , i am getting my text which was maintained while creating Service master...Now after saving, if i am seeing this is print preview, my long text data is not getting copied in PO print preview..
What went wrong?
uts

Hi Utsav,
If the text was short is it shown in prinit  preview ?
If yes , then Contact ur ABAPer for adjusting the form .
If not ,change the Form - Sapscript through ABAPer to print the changes
Regards
Ramesh Ch

Similar Messages

  • Material item text not appearing in PO Print Preview

    Hi experts,
    We have created a new PO type .  We have assigned it with PO text via Spro>Purchasing>Purchase Order > Message > Text for messages > define text for purchase order
    Maintained text for document header
    Maintained  text for document item
    But still in Purchase Order , the material PO text at item level , is not appearing at the time of print preview / print out.
    Please suggest .
    Regards,
    ( Rajneesh Gulati )

    If I understand correctly, you want to copy the purchase order text from the material master directly into the PO's for this material.
    I got the same problem; text appears in PO item text, but doesn't appear on print preview.
    => check your forms first
    => if you can't find an error here, check the copying control in
    SPRO -> Materials Management -> Purchasing -> Purchase Order -> Texts for purchase orders -> Define copying rules for item texts
    go to the text linkages of the text type that you want to see appearing
    => make sure that the entries with source object 'material master' have the Fix value (blank) rather than N or * (if you see the text appearing in the PO but not on the print out, this means that this setting is currently set on *)
    Hope this helps

  • Operation long text not coming in print priview of maintenance order

    Hi Experts,
    I am facing problem in getting the long text of operation of maintenance order( generated from maintenance plan) in the print preview because of which long text of opeartion is not showing in the print out of order but other things are coming in the printout except the long text.This is happening for the first time.Earlier long text was coming in the print of order.Can anybody suggest the possible cause behind this & solution for this problem asap.
    Thanks.

    Hello,
    Please check The IP30 batch job schedule in which LOG IN language it is schedulde for those manitenance plan.If same it is diffrent what as Long text language then it will not come in Ordre OpRN long text.
    Reagrds,
    Rakesh
    Edited by: RAKESH ASHOK MANE on Aug 18, 2010 3:46 PM

  • Text in PO(text tab in header & item) is not shown in the Print Preview

    Hi Guys,
                I face a problem in ME23N.Text maintained in Purchase Orders (text tab in header & item)  is not shown in the Print Preview.
                Can you guys help.Do I need to write a subroutine pool for this.
                <<text removed by moderator>>
    Regards,
    Rajiv
    Edited by: Matt on Nov 12, 2008 1:20 PM

    Hi ,
    Use bapi bapi_po_getdetail .
    CALL FUNCTION 'BAPI_PO_GETDETAIL'
        EXPORTING
          purchaseorder   = is_ekko-ebeln
          item_texts      = c_x
          header_texts    = c_x
        TABLES
          po_header_texts = it_header_text
          po_item_texts   = it_item_text.
    Regards
    Neetesh

  • Routing Long text not populated using LSMW

    I need help with the ROUTING LONG TEXT using LSMW. I'm using the standard LSMW direct input program /SAPDMC/SAP_LSMW_IMP . I'm confused with NAME field while loading the data. I have tried to create the routing long text manually after successful creation i opened the Longtext at header screen and opened GOTO--> HEADER there i have seen TEXT NAME is constructed based on CLIENT || N || GROUP || GROUPCOUNTER || INTERNAL_COUNTER (CLIENT||N||PLNTY||PLNNR||PLNAL||ZAEHL - field names)  I used the same logic to construct the test data for another routings which were created and doesn't have the long text. I have run the lsmw program and executed successfully but when i open the routing in CA03 i dont see the long text populated.
    Test data used looks like this:
    OBJECT   NAME TDID SPRAS TEXTFORM TEXTLINE
    ROUTING N500000890100000001 PLKO E * THIS IS A TEST1
    ROUTING N500000890100000001 PLKO E * THIS IS A TEST2
    ROUTING N500000890100000001 PLKO E * THIS IS LINE3
    ROUTING N500000910100000001 PLKO E * LONGTEXT1
    ROUTING N500000910100000001 PLKO E * LONGTEXT2
    My question here is do i need to construct the NAME as i have mentioned above or do i need to just send the Routing Group number into the file for the NAME field. Help me understand what do i need to populate into NAME field.
    Please help with the mistake i have done.
    Pretty much appriectiated for your replies.

    You asked the same question in two different forums multiple times:
    Standard LSMW to load Routing Long text
    Re: LSMW : Long text not visible after the import of data
    Please use same one thread for one question.
    I gave you most of the needed information assuming you know how to do LSMW in the first thread itself.
    You need to have the following fields in your source structure in addition to other fields like long text
    MANDT
    PLNTY
    PLNNR
    PLNAL
    ZAEHL
    In the step Maintain Field Mapping and Conversion Rules  assign the source field MANDT to the variable NAME and then again place the cursor on the variable NAME and assign variable PLNTY, (now you have two source field assigned to same variable) similarly assign all the remaining 3 source fields PLNNR, PLNAL, ZAEHL. (now you have 5 source field assigned to same variable).
    Now select the variable NAME by placing the cursor click on Rule (Insert Rule) and select the radio button Concatenation .
    Make sure that in  your input file you have leading zeros for PLNNR PLNAL and ZAEHL etc. like below
    50000089, 01, 00000001
    Also, you don't need maintain the value of OBJECT, TDID, SPRAS, TEXTFORM as source fields. You can directly maintain them as constants in Maintain Field Mapping and Conversion Rules by click on the push button Rule .

  • Text Area for long text not appearing properly for BBP_POC_DISPLAY Service

    Hi,
    In our development we have added additional Icon at ITS in Process PO transaction and onclicking  that icon Web dynpro AB screen called with the Purchase Order No of selected row .(SRM 5.0)
    There is one more icon in Web dynpro screen on click of that Purchase order service open in ITS with display mode .This is achieved with service BBP_POC_DISPLAY from Web Dynpro-AB.
    This is also working ok only the issue is in Document tab of PO The Text Area for long text appear at Top  .This functionality is working fine with BBP_POC  service from ITS .
    Has anybody faced this kind of issue ?
    Thanks,
    SMS

    Hi SMS,
    I am unsure of the additional component you are talking about. In general, issues with text area misplacing, is solved by note 1067625. May be you can check it.
    thanks,
    Ashwin

  • Material PO text not copying to Purchase Requisition

    Any assistance would be gratly appreciated...
    When creating a Purchase Requisition (ME51N) text from the Material Master - Material PO Text automatically copies to the Material PO Text of the Purchase Requisition line item - as expected
    However, when a Purchase Requisition is created via MRP, the Material PO Text is not copied from the material master to the PO.
    In config, copy rule is set as follows for PRs:
    Sequence   PR Text                     Source
    01               Material PO Text       Material Master   Set to always adopt
    We have a custom program to print PR data and the material PO text is not showing up when generated by MRP - because the PR itself does not have the text.  We could change the custome code to read directly from the material maste, but would prefer a standard solution to get the text onto the PR.
    Thanks,

    this is SAP design, for performance reasons the PO text is not copied to the requisition in MRP run.
    SAP issued an OSS note about this .

  • Long Text not transfered from Notification to Order

    Hi Experts,
    We have 4.6 c version where in the Long Text from Notification created does not gets transfereed to Order if Order is created through Notification.
    Does any one knows about any config missing or any note which needs to be applied.
    Also if we go for E.C.C 6.0 do we need to maintain the config
    Plant Maintenance and Customer Service->Maintenance and Service Processing->Maintenance and Service Order >Functions and Settings for Order Types>Define Notification and Order Integration
    instead of or in addition to the config
    Plant Maintenance and Customer Service->Maintenance and Service Processing->Maintenance and Service Notifications >Notification Creation>Notification Types-->Assign Notification Types to Order Types
    Appreciate your valuable input in this regards
    Thanks
    Manish

    Hi
    These are the some of the notes related to ur issue...
    I am not sure its gonna solve... but check it.. u might get some idea
    [445628|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=445628]
    [661800|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=661800]
    Pl Note : i think in 4.6c it not available kindly check in Define notification and order data in one screen whether option is available or not
    - Pithan

  • Long text not apearing on contract

    Hi SAP Gurus,
    Can anybody please help me with this scenario. The long text appears on the PO but does not appear on contract. When i say long text it refers to the Basic text in the additional data part of the Basic data tab. Whatever text we maintain here, it is appearing on PO but not on contract. Now here i need one more clarification. What about the Purchase order text tab in the material master. Do we need to maintain something here in order to get the long text on contract or how is it? PLease clarify me on this
    The configuration looks ok.
    Thanks
    Anusha

    Hi Manish,
    I'm getting confused here with the names of texts and the locations that they get copied to. PLease explain me  what each type of text does and where does it get copied if we want it to
    thanks
    Anusha

  • Notiifcation Long text not grey out

    Guru
    I have seen the Notification Long text screen grey out once the user saves and log out. When next user enters he wil not b able to chnage the contents entered by previous user.
    This is not actually hapening in my case...The screen and info entered doesnt grey out and the user can change it easily with no change documents generated,
    Please help me achieve this. I need the field to be grey out once it is enterd and user has loggeds out. System shoud show the log-in user name and time when saved.
    Please reply soon..

    Hello
    Please check in spro
    Plant Maintenance and Customer Service>Maintenance and Service Processing>Maintenance and Service Notifications>Notification Creation>Notification Types-->Define Long Text Control for Notification Types
    Check the below Check Box is Marked for That notification type
    Log Line
    No Text Change change
    If above setting is already done then run Notication Transction again go in long text of Notification then after that Run transction code SU53 check your authorisation weather you have right authorisation obejct assign to you.
    Regards,
    Rakesh

  • Printer will not copy but will print from the computer

    Hp Photosmart D110 all in one printer--I am totally disgusted with this printer...have had it a few months.  It will only get about 160 economy pages per ink cartridge which is ridiculous.  So we bought an ink refill kit and just refilled and reinstalled the black ink cartridge.  it is printing from the computer just fine but the printer WILL NOT COPY.  When I use the tool box and check ink levels it just shows question marks on both ink cartridges.
          I spent 45 minutes on HP Chat Support and got no answers except that I need to use genuine HP Cartridges. They could not explain to me why the printer would print but not copy with refilled cartridge.
        Any help from any of you regarding the NOT copying and the ink cartridges.....thanks so much

    Did you ever get it to copy? I have the same problem

  • Long text not displayed in outpur of adhoc query

    Hi,
    I am trying to run an ad hoc query in which i need the Org unit long text in the output.
    When i run i only see the short text of the Org unit.I tried changing the output display option as 'Value and text' and 'text' both but it shows the short text only.
    Could you please suggest what changes i need to make to the infoset to view the long text of the Org unit.
    elp will be highly appreciated.
    sushil

    The help text does not say that this is the case for routings (and I dont know it either as I never loaded text for routings).
    Of course you can read your text with the function module, as you enter the keys like you done it to load the text.
    But this is not a proof at all.
    In 90 % where the text does not appear it is just a matter of the used key. maybe forgot to have leading zeros in the name field.
    Best you enter a text manually in a route, then you use SE16 with table STXH to find this record, and then you compare the key fields of this record with the key fields of a record you created with the upload.
    if this is all okay, then it might have to do with a text indicator in the normal tables of the routing.

  • Alert : long text not complete

    Hi all,
    I manage specific alerts in my BPM.
    I have defined it as "dynamic text" alerts in ALRTCATDEF.
    These alerts are well thrown by PI however I can see only the first caracter of the long text.
    My version is PI 7.0 SP8.
    Is it a known issue ?
    Thanks in advance,
    J.C.

    Hi JC,
    This may not be an issue at all...and just the way alerts are shown in the inbox.
    Just right click on the table cell where you see the first character of the text, right click and select "view source".
    You should be able to see the long text within the HTML source.
    Though not a solution but this can be used to test out the alert.
    Regards
    Gaurav
    PS: Please reward points for helpful answers.

  • Alert long text not visible

    Hello,
    I have a problem triggering an alert with dynamic text out of a bpm. The alert is triggered correctly (I can't see any dump in tzhe log files), I can see the alert in my alert inbox, but the long text isn't filled. I'm using SAP Netweaver 2004s SP 9 (SAP Basis 7.00).
    Then I tried the same preocedure in a SAP Netweaver 2004 SP 15 (SAP Basis 6.40) with the same settings, and it worked fine. I can see the long message in the alert inbox. The only differnce was, that in 2004s the alert classification 'Webflow Alert' didn't exist, so I had to create it.
    Does anybody know, where the problem could be?
    Thanks,
    Thomas

    Hi,
    Just check that the length of the message is not more then the required limit. If thats the case it sometimes does not show the message.
    Else, just try re-activating that step again by making some dummy chnages.
    This problem happens at times when you are using dynamic variables .
    Regards
    Vijaya

  • Pm order text not copied to a requisition

    Good day, can sumone help me with this, i have created a pm order with text but when converted to a Purchase requisition the PM order text is not copied to the requisition.
    rgds
    Jabu

    Hi,
    IMG> MM> purchasing> Purchase requisition> Texts for PR-->
    in that 1) define text types
    2) define copying rules
    in that link PR to Pm order
    Thanks & regards
    Swathi

Maybe you are looking for