Service Manager 2010 lab environment syncing with production database

I am trying to setup a lab environment for SCSM 2010 to test the upgrade to SCSM 2012. I have been following the instructions found here:
http://technet.microsoft.com/en-us/library/hh914226.aspx
I have successfully made it to step 16. However, when I open the SCSM console in the lab environment it still shows the Data Warehouse and Reporting buttons. When I create a new ticket in either the lab or production environment it shows up in both consoles,
even though the production console is connected to the production server and the lab console is connected to the lab server.
Any ideas on why the lab environment is still syncing with the production server?
Thanks

Thread of the Necro-Dancer:
Regardless, the step Katie was apparently implying (but seems to be missing from her description) is the bit where you backup the database and restore it to a separate instance. after this is done, you can then install a new management server targeting this
new instance, and then promote the new management server to the workflow server, and run the isolated database using the new management server. 
i would recommend, however, that you use
the supported method of producing a upgrade lab with production data, which is very similar to the method Katie implied, includes directions covering all of these steps involved, and allows you to periodically restore production data to the lab database
with minimal overhead. 
I didn't notice the date before now. I just look at the latest unanswered posts, so not sure how I got into this one. But technet has been acting weird lately. I get an internal server error far too often.
http://codebeaver.blogspot.dk/

Similar Messages

  • To make one environment in sync with production XI

    Hi All,
    Currently I am building my DR(Disaster Recovery) envirornment for our production BOXI R3.1 environment.
    Whenever production goes down for long time, we will user DR as a production one. Thus it will work as a failover for production. To do this, DR should be always in sync with production.
    I am trying to figure out the best way to make it in sync with production.
    One approach is:Copy the CMS database and FRS input/output directories of production to DR CMS database and FRS input/output directories. Then when production goes down, I can start DR envioenment and reroute all users to it. I am thinking to copy CMS database and FRS input/output directories weekly basis. But in our environment FRS input/output directories are huge in size to copy each time and this might cause some n/w problem.
    Thereofore I am checking if there is any other best way to make DR in sync with production. Any other feature provided by BO?
    Please suggest me any other way which you have already implemented in your organization.
    Below are my enviornment details for production as well as DR:
    Product: BOXI R3.1
    OS: Linux
    CMS DB : Oracle 10g
    Web Application server: 5.5
    Thanks,
    Swapnil Rodge.

    Hi Seb,
    Thanks for quick reply. 
    I think there is one problem I can face in this scenario. Please correct me I am wrong. When I repoint DR environment to production CMS database, I need to recreate SIA on DR so that DR BO servcies get register with production CMS database and then only I can bring DR up. Thus production BO servcies entries will be overwritten by DR servciese and when we bring up the producton BOXI, since it uses the same CMS Database, we need to recreate SIA on production host again and all BO servers settings on production will be lost.
    We would like to make entire DR environment in sync with production by making CMS database and FRS input/output in sync with production. Therefore I would use separate CMS database and Input/Output FRS for DR. I will keep them in sync with production one. Thus if production goes down, I will bring entire DR environment up without pointing it to CMS database and FRS input/output.
    Is there any way to achieve this approach? Can I use Federation for this?
    Thanks,
    Swapnil Rodge.

  • Data Migration Service Manager 2010 and 2012 database to SCSM 2012 R2

    I have search the web far and wide for a good answer to this question.  We are consolidating two separate instances of Service Manager (one is 2010 and the other is 2012).  We will being moving to a new Service Manager 2012 R2 instance.  We
    don't want to upgrade the older versions SCSM (i.e. 2010 and 2012) of the software installation do to various reasons.
    We want to export all open ticket from Service Manager 2010 and 2012, and import then into the new SCSM 2012 R2 database.  The best advice I can find is:
    Export the data into a CSV file and import into SCSM 2012 R2 DB through a connector. I think there maybe too many data dependencies to do that efficiently.
    I didn't find this, and I am hoping not to use this option which would be upgrade the two instances of SCSM 2010 and 2012 apps and DBs to 2012 R2, then some how transfer the data to the new SCSM 2012 R2 instance.
    I am not sure any of these idea would even work, but I don't want to ask a question without trying to workout some possibilities.
    Thanks,
    Jay...

    Hi,
    You may simply duplicate your SCSM 2010 environment and upgrade it to SCSM 2012
    http://technet.microsoft.com/en-us/library/hh914226.aspx
    Regards
    Antoine AL Ibry

  • How to Synchronize Test Instance with Production database on regular basis.

    Hello
    How to Synchronize Test Instance with Production database on regular basis.
    I want to update my Test Instance with Production ERP on daily basis without downTime.?

    Hi,
    I recomend to configure physical standby database for your production and when ever you requir open standby Using a Physical Standby DB in Read Write Mode and Flashback DB, so that you can revert all the changes back and put the db in sync. Please follow below metalink notes.
    Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database (Doc ID 1070033.1)
    Business Continuity for Oracle E-Business Release 11i Using Oracle 11g Physical Standby Database - Single Instance and Oracle RAC (Doc ID 1068913.1)
    Business Continuity for Oracle Applications Release 11i, Database Releases 9i and 10g (Doc ID 216212.1)
    update my Test Instance with Production ERP on daily basis without downTime.?With zero down time is not possible I think.

  • Outlook 2010 is not Syncing with Blackberry!!  WHY?????

    What is wrong with RIM??  Why are they not allowing Outlook 2010 to sync with my Blackberry? Someone please fix this or I will have to change to another phone!

    Hi,
    Support for Outlook 2010 is coming in August with an update to Blackberry Desktop Manager.  See the knowledge base article from RIM at http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB17149 for more details. 
    Doc

  • BB Desktop Manager will no longer sync with BB Torch

    My Torch will no longer sync with my desktop.   BB Desktop software shows "Connecting " but this message stays on and does not change and it never connects.   Never had any trouble before.  I've reinstalled BB Desktop Manager but still have same issue.
    The day prior to me noticing this problem I disconnected my torch during a desktop software backup, which is what I suspect is the cause of this problem, but cannot seem to fix it.   Any thoughts on how to remedy?

    Your post indicates iOS 4.3 which is now quite old.  I am going to suggest restoring your iPad, which, among other things, will update your iOS to the current version.
    I recommend restoring your iPad.  Make sure you have the current version of iTunes on your computer (currently 11.0.1).  Plug your iPad into your computer, let it sync, then press "Restore" on the right side when the summary page of the iPad is displayed in iTuens' display.

  • Outlook 2010 webcal not syncing with iCloud

    I've got Facebook events exported to Outlook 2010 as a webcal, but only my default calendar will sync to iCloud. How can I get the webcal to also sync with iCloud and my iOS devices? I've tried closing outlooking, re-setting up the iCloud control panel system, then re-opening Outlook (which fixed the fact that my tasks weren't syncing). But still no look on the webcal sync. Anyone got any ideas please? The iCloud and iTunes add-ins are enabled too.

    The key to solve this problem is to sync webcal and icloud to your default outlook calendar, and as far as we know, outlook can not sync webcal to default calendar, and icloud control panel can not map icloud calendar to outlook default calendar.
    but if you use ECO , it will allow you to sync webcal to outlook default calendar and sync icloud calendar using your default outlook calendar

  • Outlook 2010 won't sync with iCloud on the web

    Outlook 2010 Calendar syncs with the iCloud Calendar in Outlook. Both are visible in Outlook, both are ticked. Calendar Sync is set up in iCloud Control Panel 2 and on settings on my iPhone & iPad. However, appointments don’t show in iPhone, iPad or iCloud on the web.

    Here's what I've discovered: Outlook has two "versions," one for iCloud and one that is an Outlook data file ("My calendar"). You can check a box in Outlook to enable either of them (go to the Home tab and expand the navigation pane). The iPad does not sync with the Outlook data file. Anything entered there has to be manually copied to the iCloud version of Outlook in order to sync with iPad. So, to sync with iPad you have to uncheck "My calendar" in Outlook and then check "iCloud" and use that version of Outlook. But when I use the iCloud version, Outlook will not accept appointments sent to me by clients. It also screws up my communication with clients in other ways. So using the iCloud version of Outlook does not work for me.
    I've discovered a third-party software that seems to solve this issue: Code Two Sync for iPad. You can Google it for reviews, the download link, etc. I downloaded and installed it and it immediately copied (synced?) all the appointments in the Outlook data file version of Outlook ("My calendar") to the iCloud version and synced them with my iPad. There were a bunch of duplicates, but I think there's some way to fix that. However...it also crashed Outlook on my computer (I have an older computer that is having issues). So I needed to uninstall it. I repeat, this is because my computer has been having other issues, I don't think it is the software's fault. I may try it again when I have more time to troubleshoot. Anyway, you might try this software and see if it works for you.

  • Calendars in Outlook 2010 won't sync with my iPhone 3gs

    Since I installed iOS 4.3 in my iPhone 3GS I cannot get iTunes 10.4 to sync my Calendars in Outlook 2010 with my iPhone.  I have not changed any settings and it has worked without problems for the last year until I installed iOS 4.3
    Can anyone help me sort this out.

    Here's what I've discovered: Outlook has two "versions," one for iCloud and one that is an Outlook data file ("My calendar"). You can check a box in Outlook to enable either of them (go to the Home tab and expand the navigation pane). The iPad does not sync with the Outlook data file. Anything entered there has to be manually copied to the iCloud version of Outlook in order to sync with iPad. So, to sync with iPad you have to uncheck "My calendar" in Outlook and then check "iCloud" and use that version of Outlook. But when I use the iCloud version, Outlook will not accept appointments sent to me by clients. It also screws up my communication with clients in other ways. So using the iCloud version of Outlook does not work for me.
    I've discovered a third-party software that seems to solve this issue: Code Two Sync for iPad. You can Google it for reviews, the download link, etc. I downloaded and installed it and it immediately copied (synced?) all the appointments in the Outlook data file version of Outlook ("My calendar") to the iCloud version and synced them with my iPad. There were a bunch of duplicates, but I think there's some way to fix that. However...it also crashed Outlook on my computer (I have an older computer that is having issues). So I needed to uninstall it. I repeat, this is because my computer has been having other issues, I don't think it is the software's fault. I may try it again when I have more time to troubleshoot. Anyway, you might try this software and see if it works for you.

  • Desktop manager for mac not syncing with calendar

    Desktop manager just started to give me a sync error yesterday when syncing the calendar. I receive no error message for the contacts. I use desktop manager for mac. I have never had this issue before. I updated desktop manager yesterday after the sync error but, that did not correct the problem.
    Any suggestions?
    Solved!
    Go to Solution.

    Thanks for the reply yancy.
    What error message are you receiving?  Are you only synchronizing to Ical or Entourage?
    Also have you attempted to forget the device and the re-setup the synchronization?  
    To forget the device, go into Device>Forget Device.  Unplug the BlackBerry, plug it back into the Mac.
    I look forward to your reply.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Application deployed on Oracle Java Cloud Service - SaaS Extension is not connecting with cloud database.

    Hello Experts,
    I have deployed an ADF application on Oracle Java Cloud Service - SaaS Extension and also deployed database objects from local environment to cloud using JDeveloper. I can see the cloud database has tables and data which I have deployed but when I access the application it seems it is not able to connect with cloud database.
    I have followed below document and same sample application (HRSystem). 
    http://www.oracle.com/webfolder/technetwork/tutorials/obe/java/JDeveloperPart1/jdeveloperPart1.html
    http://www.oracle.com/webfolder/technetwork/tutorials/obe/java/JDeveloperPart2/jdeveloperPart2.html
    Please guide me what can be the issue.
    Regards
    Gulam Dyer

    Hi,
    Can you give us more details about your issue? Any error messages?
    Thanks,
    Bogdan

  • BizTalk 2010 wcf-oracledb adapter with Oracle Database 12c

    Hi,
    My customer is currently running BizTalk 2010 adapter pack wcf-oracledb with Oracle 11g.
    They want to upgrade the oracle database to 12c.
    Is it possible to use BizTalk 2010 wcf-oracledb adapter with Oracle 12c?
    Thank you.
    br, Johan

    Hi,
    No it is not supported.
    For the Oracle Database Adapter
    Supported server versions: Oracle database version 11.1, Oracle database version 10.2, Oracle database version 10.1, Oracle database version 9.2
    Supported client versions: Oracle Data Access Components for Oracle Client 11.1.0.6 with Patch Set 11.1.0.7, Oracle Data Access Components for Oracle Client 11.1.0.7
    Refer:
    Microsoft BizTalk Adapter Pack 2010 Documentation
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • MS Outlook 2010 calendar not syncing with iPad and iPhone

    My iPad and iPhone sync perfectly in iCloud.  However, using MS Outlook 2010 Calendars they do not sync.  I have deleted and reinstalled iCloud with my PC but still no results.  Even though iCloud shows up in my Calendar, any additions or deletions in that Calendar do not show up on my iPhone or iPad.  Can you help?

    Hey oliroyal,
    Welcome to the BlackBerry Support Community Forums.
    First check your default services on the device under Options, Advanced Options, default services.
    If the default services are configured correctly I would suggest try creating a new MAPI profile as outlined in this articlehttp://btsc.webapps.blackberry.com/btsc/KB02083 and then reconfigure the Desktop Software as shown herehttp://www.blackberry.com/btsc/KB17022
    Thank you.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Outlook 2010 will not sync with iCloud after initial sync

    Hi guys, the basic summary is that after upgrading from a mobile me account to icloud (using a me.com account), I was able to sync everything from Outlook to the customer's iPhone but anything created after that would not sync. I tried creating a contact, calendar item, and other calendar items, none of which showed up either way (outlook to phone and vice versa).
    Here are all the details that may be needed to assist with this question (and thank you!)
    The account was upgraded from mobileme to iCloud, then outlook was upgraded from 2003 to 2010.
    OS is Windows 7 64 bit
    Outlook has 2 data files which hold all the contacts/calendars/tasks.
    I had to add the me.com email to outlook so that it would perform the initial sync.
    After the initial sync, all calendars, contacts, etc were moved to deleted items (which I think may be normal). I just moved them back to one of the pst files.
    At this point, creating an item in any calendar, or creating a contact does not result in that contact/calendar entry showing up on the iphone (or vice versa).
    Outlook does not show "icloud" calendar, only the calendars I previously created, but the iPhone says "All iCloud Calendars" and they list the calendars that we created in outlook.
    Customer says it synced fine when he used mobile me back in the day, and then it stopped so we had to upgrade to iCloud. Any ideas? =/ I spent over an hour trying to figure this one out, even had some brief apple tech help.
    Thank you SO much for your help. I'd LOVE to be able to get this fixed, otherwise I need to start looking into alternatives for syncing iphone with outlook 2010

    Hi guys, the basic summary is that after upgrading from a mobile me account to icloud (using a me.com account), I was able to sync everything from Outlook to the customer's iPhone but anything created after that would not sync. I tried creating a contact, calendar item, and other calendar items, none of which showed up either way (outlook to phone and vice versa).
    Here are all the details that may be needed to assist with this question (and thank you!)
    The account was upgraded from mobileme to iCloud, then outlook was upgraded from 2003 to 2010.
    OS is Windows 7 64 bit
    Outlook has 2 data files which hold all the contacts/calendars/tasks.
    I had to add the me.com email to outlook so that it would perform the initial sync.
    After the initial sync, all calendars, contacts, etc were moved to deleted items (which I think may be normal). I just moved them back to one of the pst files.
    At this point, creating an item in any calendar, or creating a contact does not result in that contact/calendar entry showing up on the iphone (or vice versa).
    Outlook does not show "icloud" calendar, only the calendars I previously created, but the iPhone says "All iCloud Calendars" and they list the calendars that we created in outlook.
    Customer says it synced fine when he used mobile me back in the day, and then it stopped so we had to upgrade to iCloud. Any ideas? =/ I spent over an hour trying to figure this one out, even had some brief apple tech help.
    Thank you SO much for your help. I'd LOVE to be able to get this fixed, otherwise I need to start looking into alternatives for syncing iphone with outlook 2010

  • The CC desktop manager is not in sync with the installed apps

    The Adobe CC Desktop Manager only lists Muse and Acrobat as installed apps, failing to list DW, Photoshop, Illustrator InDesign and all sorts of others.
    How can I re-sync the desktop manager with the installed apps?
    OSX 10.10.1
    david

    I'm having the opposite problem.  All those listed in the screen shot as "Install" have been installed.
    Deleting OPM.db and downloading and installing CreativeCloudInstaller.dmg did not fix the issue.
    Do I really need to delete all of my installed apps and starting from scratch?
    david
    Apps are listed as "Install" when they've already been installed

Maybe you are looking for