Service Manager 2012R2 - Hotfix for Service Manager 2012 SP1 secondary Management server

Can the hotfix for the issue described here -
http://blogs.technet.com/b/servicemanager/archive/2013/04/22/service-manager-2012-sp1-secondary-management-server-cannot-set-availability-on-a-health-service-that-doesn-t-exist.aspx
, be applied to a 2012R2 Service Manager environment?
My dilemma; In a Service Manager 2012 SP1 environment, I installed a secondary mgmt server, promoted it, then upgraded to R2. This R2 Primary mgmt server has the error described in the TechNet blog.
The reason this was done, the original primary mgmt server (2012 SP1) resided on the same server as the Portal. This original primary is still at 2012 SP1 with the System Center services disabled.
Again, can the hotfix for Service Manager 2012 SP1 secondary mgmt servers be applied to a Primary mgmt server (or environment, however the hotfix is run) server Service Manager 2012 R2?
Thank you,
Brian VanDam
BVAN in SoCol

Hi,
Hmm, you should probably log a case for this, but my first thought here would be to install a new SCSM 2012 R2 server and promote that one to the new Primary server, then remove the old ones.
Regards
//Anders
Anders Asp | Lumagate | www.lumagate.com | Sweden | My blog: www.scsm.se

Similar Messages

SCCM 2012 R2 Secondary site server will support the DMZ Zone?

We are planning for SCCM 2012 Migration, currently we have separate Primary server in DMZ.
Kindly suggest what is the best method to deploy in the DMZ (separate primary or secondary or DP) because we have only 500 Client in DMZ.

Hi,
There is a blog talking about this error. You could try the method in the blog.
To summarise, when installing SCCM 2012 SP1 secondary site on a pre-configured SQL 2012 instance regardless which SQL edition is being used, “NT AUTHORITY\SYSTEM” account needs to be given
securityadmin and sysadmin rights. If SQL Express is used, there are few additional steps need to be carried out to configure the SQL TCP connection as documented in my previous blog:
http://blog.tyang.org/2012/04/09/installing-sccm-2012-rtm-secondary-site-using-a-pre-installed-sql-express-2008-r2-instance/
Installing SCCM 2012 SP1 Secondary Site with a Pre-Configured SQL 2012 Instance
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCCM 2012 SP1 Secondary Site installation Fails

Hi.
I have multiple secondary sites when i am trying to install new SCCM 2012 Secondary site server remotely but installation status shows a pending from last few days.
1) SEC server have privilages on System managent container
2) Primary site Server account and computer have local admin right on SEC server
hman logs says the following error message
Cannot get SQL Certificate from site xxx
CheckParentSQLServerCertificate: Failed to get SQL certificate for site XXX
1) Deleted the secondary site and reinstalled the site with different Site code but no luck
2) Able to telnet 1433 and 4022 from both primary to secondary and vice versa
3) SQL server Configuration Manager , TCP IP port was set to 1433.
please let me know if any thing i am missing
Thanks

Hi Guys
Exact same problem as described above:
Been told to install SQL Express manually first, but even after that, we continued to get the same problem.
The SQL Communication between the 2 sites doesn't seem to work.
I noticed that the Primary's SQL Security Account doesn't get created on Primary DB, in the Database replication the link has not yet been created either.
The "Exec spDrsSendSubscriptionInvalid 'Secondary 3 digit site code','Primary 3 digit site code','configuration data'" worked on 1 Secondary, but fails on all the rest.
Uninstalling/Installing the Secondary doesn't work either.
HMAN.LOG:
Update site server active directory informtion into DB SMS_HIERARCHY_MANAGER 2013/07/28 09:51:12 AM 7964 (0x1F1C)
CheckSQLServiceRestart : SQL Service hasn't been restart since last time we check, skip it. SMS_HIERARCHY_MANAGER 2013/07/28 09:51:12 AM 7964 (0x1F1C)
Time to verify if the parent['PRI-SITECODE'] sql server certificate is still valid on site ['SEC-SITECODE'] sql server. SMS_HIERARCHY_MANAGER 2013/07/28 09:51:12 AM 7964 (0x1F1C)
Cannot get SQL Certificate from Site 'PRI-SITECODE'. SMS_HIERARCHY_MANAGER 2013/07/28 09:51:12 AM 7964 (0x1F1C)
CheckParentSQLServerCertificate: Failed to get SQL certificate for site PM2 SMS_HIERARCHY_MANAGER 2013/07/28 09:51:12 AM 7964 (0x1F1C)
Any ideas would be appreciated.

Migrate 2012 SP1 CU3 Primary Server to a new machine?

Because of some issues I am having with my current primary site server, I would like to bring up a new server and decommission the old.
The old server is running on 2008 R2 and the new server will run on 2012 R2.
Right now, I have two servers running CM 2012 SP1 CU3. I plan to upgrade the entire hierarchy to 2012 R2 before I decommission the old server.
Primary Site Server Site System Roles – Distribution Point, Endpoint Protection Point, Management Point, Reporting Services Point, Site Server, Site System
Second Server Roles – Application Catalog, Distribution Point, Fallback Status Point, Management Point, Site System, Software Update Point, State Migration Point
Can someone please help me understand the process that I should follow to make this successful?
1 - Bring up the new server
2 - Configure all settings on the new server
3 – Install Site System Roles on the new server
4 – Add SMS Provider to the new server
5 – Uninstall Site Server Roles from old server
What am I not thinking about?
Is there a better way to do this?
Thanks for any help

Hi,
For the Second Server with roles that could be an option to install a new server, and move the roles to that server.
For the Primary Site server there is no possibiltity to setup a new Primary Site server and transfer the role to that server as you can with the other roles. The way to do that would be to do a backup of Configuration Manager on the Server running 2008
r2 and restore it on the server running Server 2012 r2 as an inplace OS upgrade is not supported on a primary site server either.
You haven't mentioned where you SQL server is located either if it is local or remote.
If you have issued you could also install a new Primary Site and Migrate the objects from the old Primary Site and then reassign the clients to the new site.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Audit collection services SCOM 2012 SP1

Hi all,
sorry for my englich . I have trouble with ACS . I set in the DC audit logs :
http://www.techrepublic.com/blog/data-center/reporting-on-security-with-microsoft-audit-collection-services/.
After this I try look to report Domain and Bultin administrators membwrschip changes . But the report is empty after i try change domain admins groups....
And second questation :
what mean report usage_sensitive security groups changes ?
thank you .....
Falcon

Hi,
You may first check your secutiry logs to make sure those membership change event is generated.
In addition, did you follow the link below when deploying ACS:
http://blogs.technet.com/b/fesiro/archive/2013/01/08/how-to-deploy-audit-collection-services-acs-in-scom-2012.aspx
Hope the article below can be helpful for you:
http://scomandplus.blogspot.ca/2012/08/error-in-scom-2012-acs-report-sensitive.html
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

VMware Tools Service not Working on Secondary Virtual Server

Hi All,
I have Primary Server as Physical and Secondary Server is VM , On Secondary server VMware Tools are Installed but not running I tried to Start the service and I got following error.
The VMware Tools service terminated with the following error:
Incorrect function.
Is this normal behavior that on Secondary server doesn't run VM services , Further i Checked there is registry value for VMware Tools.
Regards
Usman Ghani

Hi
Welcome to communities.
I think this is normal behavior
For more please check log if get any additional clue.

Hardware Requirements for a SCCM 2012 CAS with SQL Server Remote

The hardware requirements for a CAS server with SQL Server Enterprise locally installed are:
16 cores (Intel Xeon L5520 or comparable CPU)
64 GB of RAM
1.5 TB of disk space for the operating system, Configuration Manager, SQL Server, and all database files.
Does anyone know what the hardware requirements are if SQL Server Enterprise is remote from the CAS server? It's not listed. -Shane

Even though I am going to be strung up for even saying this, I do agree there is a use for a CAS outside of 100,000 users. If you do indeed have distinct admins managing their own images and apps in remote
locations then I see the benefit of a CAS. A remote ConfigMgr console connecting to a primary site would perform poorly. Admin A at the primary site would not experience any issues but Admin B would be in for a lot of work and waiting. Any
time Admin B needed to add an app or image it would have to be copied up to the remote primary site and then distributed back down. This is not the best scenario.
There are scenarios in company merger situations (and others I am sure) where the management of both locations has not been consolidated down to one location yet and is not going to be done as part of the deployment or upgrade. If you had a 2007 environment
it is going to be very hard to convince the admin at the remote location that this upgrade is going to be a good thing for him/her. There is an option for the remote admin to RDP into a server in the primary site but the image and apps still need
to be distributed down to the remote location. During testing this can be very time consuming.
I do agree that adding a CAS adds additional complexity but in some cases such as the one I described it is the right decision.
Thank you for the reply. And i totally agree that in some cases a design like that is a necessary evil (but not by our personal wants).
We had that design with 2007 (implemented before my time), and as you predicted EU admins complained about difficulty using the console RDP-ed into a box close to the primary site. The bandwidth to and from different regions is out of scope for me so I do what
I can with what I have. We too will be moving forward with a CAS hierarchy.
Administratively the other IT depts in other regions operate on their own. I dont handle any of the EU computers on a day to day basis whatsoever, etc. We're not merging but our IT shops operate with near independence.

SCCM 2012 SP1 - Secondary SUP Sync Source Server Changed without intervention

Hi,
Recently I noticed that some of ours Secondary SUP's have stopped syncing. Looking at the logs I found that they cannot found SUP parent. Name resolution was OK, no firewall blocking traffic flow, SUP at Primary Site working normally, all replica SUP services
online.
Then I went to the Sync Settings at Site Components of the SUP replica and the value of the option "Synchronize from a upstream data source location (URL)" had been changed!
The URL of the upstream server has the correct server name, but the 8530 port is missing! The interesting fact is that I have other SUP replicas working normally with the correct upstream server name and port.
So, my question is: Since I've installed all the replicas SUP's with the same upstream SUP settings, they have been working normally until last week, how the settings are now wrong? The property is greyed out and I cannot change it back to the
correct parameter.
Is there any way to correct it without having to reinstall all the replicas SUPs?
Thanks!!

Hi Joice,
Thanks for your response! Well, I followed your suggestion but it didn't work. After I removed the parent SUP, the Sync Settings of the SUP replicas were still greyed out.
I forgot to mention in my post that this problem appeared after I moved the SCCM database to another SQL server. I followed the right procedure and everything worked fine but the SUP. After I run the Perform site maintenance or reset this site I noticed
that SCCM removed the port 8530 from the parent SUP. All the replicas stopped syncing. Then I changed back the port through SCCM console - Site Components - and all worked fine. But 2 days later, the majority of my SUP replicas have the port 8530 removed from
Sync Settings and they cannot sync anymore, and here I am.
There's a cmdlet (Set-CMSoftwareUpdatePointComponent) I thought I could use, but it only works with R2.
So, I just reinstalled the Parent SUP, hoping that it could reconfigure replicas SUPs, but I think it's a long shot.

Site Code for SCCM Clients installed from Secondary Site Server

Hello,
We have started the implementation of SCCM 2012 R2 at our network. We have setup a Primary site (JFO) server & pushed out the installation of SCCM clients to the local subnet. Things went fine.
We have installed a Secondary site (ATC) at a remote network. We have tested client installation in the installation wizard we specify to install the client from the Secondary server. When SCCM client installed from the Secondary server, the site
code that appears on the client in the control panel->Configuration Manager client settings is the site code of the primary site and not the secondary site.
Is this behavior is normal

Ultimately, secondary sites do *not* manage clients and so will never be assigned to the secondary site. However, do note that resources in the console that represent systems that do not have the client agent may show the site code of the secondary site
if they fall within a boundary group associated with that secondary site. This is done so that client push can be initiated from the correct site. More gory details at http://blog.configmgrftw.com/secondary-sites-and-boundary-groups/
Jason | http://blog.configmgrftw.com | @jasonsandys

SCOM 2012/SP1/R2 - What Is the Best Management Pack for HP Storage (P2000)

Hi all!
What would be the best recommended Management Pack for HP Storage (P2000) for the SCOM 2012/SP1/R2? Free products are privileged, of course, but we would also consider the paid ones.
Thank you very much for your time and attention!
Best regards!

Hi,
Recently I created Custom Management pack for MSA P2000 Storage. Its primary purpose is to monitor performance.
See: http://jurelab.wordpress.com/ for details.
Hope it helps
Jure

[Forum FAQ] Management Point fails after installing SCCM 2012 SP1

Symptom:
The Management Point might fail to be installed after you install SCCM 2012 sp1 on Windows Server 2012, either fresh install or others.
You might see some errors in mpMSI.log like listed below.
“Setup was unable to compile the file CcmExec_Global.mof”
“The error code is 80041002”
Cause:
Reinstall Management Point cannot work. This is because CCM Namespace remains in WMI which prevents SCCM from installing MP. You need clear CCM Namespace from WMI.
Resolution:
1. Uninstall Management Point from the console, then wait for the uninstallation to finish in MPSetup.log.
2. Open Wbemtest -> Connect to root -> Click Enum Classes and choose Recursive -> Double click _NAMESPACE in Query Result dialog -> Click Instances -> Delete _NAMESPACE.Name=”ccm”
3. Install Management Point.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Symptom:
The Management Point might fail to be installed after you install SCCM 2012 sp1 on Windows Server 2012, either fresh install or others.
You might see some errors in mpMSI.log like listed below.
“Setup was unable to compile the file CcmExec_Global.mof”
“The error code is 80041002”
Cause:
Reinstall Management Point cannot work. This is because CCM Namespace remains in WMI which prevents SCCM from installing MP. You need clear CCM Namespace from WMI.
Resolution:
1. Uninstall Management Point from the console, then wait for the uninstallation to finish in MPSetup.log.
2. Open Wbemtest -> Connect to root -> Click Enum Classes and choose Recursive -> Double click _NAMESPACE in Query Result dialog -> Click Instances -> Delete _NAMESPACE.Name=”ccm”
3. Install Management Point.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

List of hotfix for Hyper V

Hello,
We have environment of Hyper V 2008 R2 Sp1, Hyper V 2012 & Hyper V 2012 R2. I need to know if there is any site where MS publish list of recommended hotfix for these product and the list is regularly updated.
Thanks
Fakhrudin

would be easier to use only one Version right ? so you would have all sexy 2012R2 Features on the complete Environment.
in case you do not have 2012R2 License for all you can use the free Hyper-V Server 2012R2 Version
2008R2 Hotfixes for Cluster and Hyper-V
http://support.microsoft.com/kb/2545685/de
2012 Hotfixes for Cluster and Hyper-V
http://support.microsoft.com/kb/2784261/en-us
2012R2 Hotfixes for Cluster and Hyper-V
http://support.microsoft.com/kb/2920151/en-us
or type "recommended hotfixes and updates for ..." on your favorit search ... :-)

Prerequiste checker for Secondary site 2012 Sp1

Hello All,
We want to install SCCM 2012 SP1 Secondary site from SCCM Primary console.
We found out that we can run PreRequiste checker command from primary site server like below:
◦prereqchk.exe /SEC /Ssbport 4022 /SourceDir <Source Folder Path>
I have 3 questions
1) Can anyone tell what is /SourceDir in this command?<source Folder="" Path=""></source>
2) Also if we have install Secondary from primary console where will the script file be created (configmgrautosave.ini) so that we can automate other secondary sites installation
3) If we install SQL express 2012 CU2 manually on secondary server, can we installed named instance for it?
Appreciate any help in advance!!!

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Non supported version of SQL with new install of SCOM 2012 SP1

I have SQL 2012 SP1 running on Server 2012. I have tried the SCOM installation with and without CU2 (to fix the 1618 installation error)
SC VMM installed cleanly and appears to work.
The install for SCOM produces an error that says, "The installed version of SQL Server is not supported". I have not been able to find any log from the install that has that error in it.
Also, I have not been able to determine the true requirements of the SQL server for SCOM. (I found dock SCOM 2012 RTM and SQL 2008 R2, but noting for 2012 SP1.
Can someone point me to the correct place for the install log with (hopefully more information) and/or the requrements for the SQL installation?
Roy

The log is not created yet because it has not started the install.
The firewall is the most common issue indeed. Temporarily Disable the firewall and see whether you can continue.
Are you using a developers edition? The only 2 editions supported are standard and Enterprise.
The true requirements for SCOM 2012 sp1:
We recommend that you check for updates and hotfixes for SQL Server. Note the following database considerations for Operations Manager:
SQL Server 2008 R2 and SQL Server 2012 are available in both Standard and Enterprise editions. Operations Manager will function with both editions.
Operations Manager does not support hosting its databases or SQL Server Reporting Services on a 32-bit edition of SQL Server.
Using a different version of SQL Server for different Operations Manager features is not supported. The same version should be used for all features.
SQL Server collation settings for all databases must be one of the following: SQL_Latin1_General_CP1_CI_AS, French_CI_AS, Cyrillic_General_CI_AS, Chinese_PRC_CI_AS, Japanese_CI_AS, Traditional_Spanish_CI_AS, or Latin1_General_CI_AS. No other collation
settings are supported.
The SQL Server Agent service must be started, and the startup type must be set to automatic.
Side-by-side installation of System Center Operations Manager 2007 R2 reporting and System Center 2012 Service Pack 1 (SP1), Operations Manager reporting on the same server is not supported.
The db_owner role for the operational database must be a domain account. If you set the SQL Server Authentication to Mixed mode, and then try to add a local SQL Server login on the operational database, the Data Access service will not be able to start.
For information about how to resolve the issue, see System Center Data Access Service Start Up Failure Due to SQL Configuration Change
If you plan to use the Network Monitoring features of System Center 2012 – Operations Manager, you should move the tempdb database to a separate disk that has multiple spindles. For more information, see
tempdb Database.
Found here:
http://technet.microsoft.com/en-us/library/jj656654.aspx#BKMK_RBF_OperationsDatabase
It's doing common things uncommonly well that brings succes.

Procedure performing a "Retry Secondary Site" Operation in SCCM 2012 R2 Secondary Server

Dear Brother,
My SCCM 2012 R2 Secondary Site Server, unfortunately crashed and required to be restored, doing this I end up performing a "Retry Secondary Site Operation.
One by one I am clearing out the errors but there are few remaining errors on the prerequisite checks:
1.[Failed]:The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service name> or LOCAL SERVICE. You must configure the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
Actions Done: SQL Related Services use Logon As Domain Account "Microsoft-Domain\BillAdmin" , but still the above message still appears in the logs.
Actions Done: None
2.[Failed]:The collation of the site database does not match the collation of the parent site's database. All sites in a hierarchy must use the same database collation.
3.[Failed]:The site server might be unable to publish to Active Directory. The computer account for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have
manually verified these permissions. For more information about your options to configure required permissions, see
http://go.microsoft.com/fwlink/p/?LinkId=233190.
Actions Done: None, as this machine is previously a working Secondary site for 1 Year already. So I do not suspect anything from the current related configuration.
4.[Failed]: Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions.
Setup cannot continue.
Action Taken: Domain Account "Microsoft-Domain\BillAdmin" has a
Sysadmin roles and actually all the check boxes are chosen to acquire all SQL account roles"
5. [Failed]:Prerequisite checks complete with failure - check ConfigMgrPrereq.log
in the root of the primary site server system drive.
6[Failed]:Unable to complete secondary site server installation - check ConfigMgrSetup.log in the root of the secondary site server system drive.
ConfigMgrPrereq.log-Start
?<12-27-2014 23:39:35> ********************************************
?<12-27-2014 23:39:35> ******* Start Prerequisite checking. *******
?<12-27-2014 23:39:35> ********************************************
?<12-27-2014 23:39:35> Commandline :
"E:\Program Files\Microsoft Configuration Manager\bin\x64\smsexec.exe"
?<12-27-2014 23:39:35> Check Type: Secondary site
Site Server: SecondarySite2.microsoft.com,
SQL Server: SecondarySite2.microsoft.com,
SQL Named Instance: MSSQLSERVER,
Install Folder: E:\Program Files\Microsoft Configuration Manager\,
Setup Source Folder: E:\Source\SCCM2012-R2
?<12-27-2014 23:39:35> INFO: Executing prerequisite functions...
?<12-27-2014 23:39:35> ===== INFO: Prerequisite Type & Server: SITE_SEC:SecondarySite2.microsoft.com =====
?<12-27-2014 23:39:35> <<<RuleCategory: Access Permissions>>>
?<12-27-2014 23:39:35> <<<CategoryDesc: Checking access permissions...>>>
?<12-27-2014 23:39:35> INFO: CheckLocalSys is Admin of <SecondarySite2.microsoft.com>.
?<12-27-2014 23:39:43> SecondarySite2.microsoft.com;    Site server computer account administrative rights;    Passed
?<12-27-2014 23:39:43> <<<RuleCategory: System Requirements>>>
?<12-27-2014 23:39:43> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
?<12-27-2014 23:39:43> INFO: Check Lanman service: <SecondarySite2.microsoft.com>.
?<12-27-2014 23:39:44> SecondarySite2.microsoft.com;    Check Server Service is running;    Passed
?<12-27-2014 23:39:45> INFO: OS version:601, ServicePack:1.
?<12-27-2014 23:39:46> INFO: Target computer is a Windows server.
?<12-27-2014 23:39:46> SecondarySite2.microsoft.com;    Unsupported site server operating system version for Setup;    Passed
?<12-27-2014 23:39:46> SecondarySite2.microsoft.com;    Domain membership;    Passed
?<12-27-2014 23:39:47> INFO: Free disk space on target
\\SecondarySite2.microsoft.com\E$\. = 83157 MB
?<12-27-2014 23:39:47> SecondarySite2.microsoft.com;    Free disk space on site server;    Passed
?<12-27-2014 23:39:47> SecondarySite2.microsoft.com;    Pending system restart;    Passed
?<12-27-2014 23:39:48> INFO: The server SecondarySite2.microsoft.com is not read-only domain controller.
?<12-27-2014 23:39:48> SecondarySite2.microsoft.com;    Read-Only Domain Controller;    Passed
?<12-27-2014 23:39:48> INFO: Check FQDN Length for site server: <SecondarySite2.microsoft.com>.
?<12-27-2014 23:39:48> SecondarySite2.microsoft.com;    Site Server FQDN Length;    Passed
?<12-27-2014 23:39:48> <<<RuleCategory: Dependent Components>>>
?<12-27-2014 23:39:48> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
?<12-27-2014 23:39:48> SecondarySite2.microsoft.com;    Microsoft XML Core Services 6.0 (MSXML60);    Passed
?<12-27-2014 23:39:49> SecondarySite2.microsoft.com;    Microsoft Remote Differential Compression (RDC) library registered;    Passed
?<12-27-2014 23:39:49> INFO: Checking Windows Installer version on SecondarySite2.microsoft.com.
?<12-27-2014 23:39:50> INFO: Path of Windows Installer is <\\SecondarySite2.microsoft.com\C$\Windows\system32\msi.dll>.
?<12-27-2014 23:39:51> INFO: Msi.dll version is: <5.0.7601.17807> .
?<12-27-2014 23:39:51> SecondarySite2.microsoft.com;    Microsoft Windows Installer;    Passed
?<12-27-2014 23:39:51> INFO: Start Checking InstallSQLExpress on site server: SecondarySite2.microsoft.com, SQL Server instance MSSQLSERVER
?<12-27-2014 23:39:51> INFO: SQL Server Express installation was not selected.
?<12-27-2014 23:39:51> SecondarySite2.microsoft.com;    SQL Server Express on Secondary Site;    Passed
?<12-27-2014 23:39:52> SecondarySite2.microsoft.com;    Existing Configuration Manager server components on site server;    Passed
?<12-27-2014 23:39:52> SecondarySite2.microsoft.com;    Firewall exception for SQL Server (stand-alone primary site);    Passed
?<12-27-2014 23:39:52> INFO: SQL Server computer <SecondarySite2.microsoft.com>
?<12-27-2014 23:39:52> INFO: SQL Server named instance <MSSQLSERVER>
?<12-27-2014 23:39:53> SecondarySite2.microsoft.com;    SQL Server service running account;    Error;    The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service
name> or LOCAL SERVICE. You must configure the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
?<12-27-2014 23:39:53> INFO: SQL Server computer <SecondarySite2.microsoft.com>
?<12-27-2014 23:39:53> INFO: SQL Server named instance <MSSQLSERVER>
?<12-27-2014 23:39:53> INFO: Cannot connect to registry key.
?<12-27-2014 23:39:53> SecondarySite2.microsoft.com;    Dedicated SQL Server instance;    Passed
?<12-27-2014 23:39:53> INFO: CheckSQLCollationSecondary
?<12-27-2014 23:39:53> INFO: Collation on <PrimarySite2DB.microsoft.com> <SQL_Latin1_General_CP1_CI_AS>
?<12-27-2014 23:41:27> ERROR: failed to get collation from secondary site
?<12-27-2014 23:41:27> SecondarySite2.microsoft.com;    Parent/child database collation;    Error;    The collation of the site database does not match the collation of the parent site's database. All
sites in a hierarchy must use the same database collation.
?<12-27-2014 23:41:27> INFO: Checking .NET framework versions 3.5...
?<12-27-2014 23:41:28> INFO: .NET is installed
?<12-27-2014 23:41:28> SecondarySite2.microsoft.com;    Minimum .NET Framework version for Configuration Manager site server;    Passed
?<12-27-2014 23:41:28> INFO: Skipping check for .NET version, user did not select to install SQL Server Express for Secondary Site.
?<12-27-2014 23:41:28> SecondarySite2.microsoft.com;    Minimum .NET Framework version for SQL Server Express edition installation for Configuration Manager Secondary Site;    Passed
?<12-27-2014 23:41:28> INFO: CheckInstallSourceVersion <E:\Source\SCCM2012-R2>
?<12-27-2014 23:41:29> SecondarySite2.microsoft.com;    Setup Source Version;    Passed
?<12-27-2014 23:41:29> INFO:CheckInstallSourcePath <SecondarySite2.microsoft.com>
?<12-27-2014 23:42:14> SecondarySite2.microsoft.com;    Setup Source Folder;    Passed
?<12-27-2014 23:42:14> INFO: Enter CheckSecSiteSqlOnSameMachine.
?<12-27-2014 23:42:14> INFO: Target secondary site Machine <SecondarySite2.microsoft.com>
?<12-27-2014 23:42:14> INFO: SQL Server computer <SecondarySite2.microsoft.com>
?<12-27-2014 23:42:14> SecondarySite2.microsoft.com;    SQL Server on the Secondary Site Computer;    Passed
?<12-27-2014 23:42:14> INFO:CheckSupportedFQDNFormat <SecondarySite2.microsoft.com>
?<12-27-2014 23:42:15> INFO: NetBIOS <SECONDARYSITE2>
?<12-27-2014 23:42:15> SecondarySite2.microsoft.com;    Primary FQDN;    Passed
?<12-27-2014 23:42:15> INFO:CheckMachineAccountHasADAccess <SecondarySite2.microsoft.com>
?<12-27-2014 23:42:40> ERROR: Site server does not have create child permission on AD 'System Management'
?<12-27-2014 23:42:40> WARN: Site server does not have delete child permission on AD 'System Management'
?<12-27-2014 23:42:40> SecondarySite2.microsoft.com;    Verify site server permissions to publish to Active Directory.;    Warning;    The site server might be unable to publish to Active Directory. The computer
account for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure
required permissions, see
http://go.microsoft.com/fwlink/p/?LinkId=233190.
?<12-27-2014 23:42:40> INFO:CheckRemoteWMIConnection <SecondarySite2.microsoft.com>
?<12-27-2014 23:42:48> SecondarySite2.microsoft.com;    Remote Connection to WMI on Secondary Site;    Passed
?<12-27-2014 23:42:48> INFO: Check required collation of Sql Server.
?<12-27-2014 23:42:48> INFO: LangID <409>
?<12-27-2014 23:42:48> INFO: NOT primary site or CAS install, skipping check for reqired collation of SQL Server.
?<12-27-2014 23:42:48> SecondarySite2.microsoft.com;    Required SQL Server Collation;    Passed
?<12-27-2014 23:42:48> ===== INFO: Prerequisite Type & Server: SQL:SecondarySite2.microsoft.com =====
?<12-27-2014 23:42:48> <<<RuleCategory: Access Permissions>>>
?<12-27-2014 23:42:48> <<<CategoryDesc: Checking access permissions...>>>
?<12-27-2014 23:42:48> INFO:RemoteCheckAdminOnSQL <SecondarySite2.microsoft.com>, SQL Server <SecondarySite2.microsoft.com>
?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;    SQL Server sysadmin rights;    Error;    Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions
on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions. Setup cannot continue.
?<12-27-2014 23:44:33> ===== INFO: Prerequisite Type & Server: MP:SecondarySite2.microsoft.com =====
?<12-27-2014 23:44:33> <<<RuleCategory: Access Permissions>>>
?<12-27-2014 23:44:33> <<<CategoryDesc: Checking access permissions...>>>
?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;    Administrative share (Site system);    Passed
?<12-27-2014 23:44:33> INFO:CheckSiteSystemtoSQLConnectivity <SecondarySite2.microsoft.com>
?<12-27-2014 23:44:33> INFO: Installing secondary site, skipping SQL Server connectivity check.
?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;    Site System to SQL Server Communication;    Passed
?<12-27-2014 23:44:33> <<<RuleCategory: System Requirements>>>
?<12-27-2014 23:44:33> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
?<12-27-2014 23:44:33> INFO: The rule 'Check Server Service is running' has been run on server 'SecondarySite2.microsoft.com', skipped.
?<12-27-2014 23:44:34> INFO: OS version:601, ServicePack:1.
?<12-27-2014 23:44:35> INFO: Target computer is a Windows server.
?<12-27-2014 23:44:35> SecondarySite2.microsoft.com;    Unsupported management point operating system version for Setup;    Passed
?<12-27-2014 23:44:35> INFO: The rule 'Domain membership' has been run on server 'SecondarySite2.microsoft.com', skipped.
?<12-27-2014 23:44:36> INFO: Windows Cluster not found on SecondarySite2.microsoft.com.
?<12-27-2014 23:44:36> SecondarySite2.microsoft.com;    Windows Failover Cluster;    Passed
?<12-27-2014 23:44:36> INFO: The rule 'Pending system restart' has been run on server 'SecondarySite2.microsoft.com', skipped.
?<12-27-2014 23:44:36> <<<RuleCategory: Dependent Components>>>
?<12-27-2014 23:44:36> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
?<12-27-2014 23:44:36> INFO: The rule 'Microsoft XML Core Services 6.0 (MSXML60)' has been run on server 'SecondarySite2.microsoft.com', skipped.
?<12-27-2014 23:44:36> SecondarySite2.microsoft.com;    IIS service running;    Passed
?<12-27-2014 23:45:35> INFO: CheckWebSvcExtnRemote, result:<7>.
?<12-27-2014 23:45:35> SecondarySite2.microsoft.com;    BITS installed;    Passed
?<12-27-2014 23:47:00> INFO: CheckWebSvcExtnRemote, result:<7>.
?<12-27-2014 23:47:01> WARN: BITS Service is not running on SecondarySite2.microsoft.com.
?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    BITS enabled;    Passed
?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    IIS HTTPS Configuration for management point;    Passed
?<12-27-2014 23:47:01> INFO: Stand-alone primary site or secondary site. Skip checking firewall settings for SQL Server
?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    Firewall exception for SQL Server for management point;    Passed
?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    Administrative rights on management point;    Passed
?<12-27-2014 23:47:01> INFO:CheckV4ClientNotInstalled <SecondarySite2.microsoft.com>
?<12-27-2014 23:47:45> SecondarySite2.microsoft.com;    Client Version on Management Point Computer;    Passed
?<12-27-2014 23:47:45> ===== INFO: Prerequisite Type & Server: DP:SecondarySite2.microsoft.com =====
?<12-27-2014 23:47:45> <<<RuleCategory: Access Permissions>>>
?<12-27-2014 23:47:45> <<<CategoryDesc: Checking access permissions...>>>
?<12-27-2014 23:47:45> <<<RuleCategory: System Requirements>>>
?<12-27-2014 23:47:45> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    Unsupported distribution point operating system version for Setup;    Passed
?<12-27-2014 23:47:47> INFO: The rule 'Domain membership' has been run on server 'SecondarySite2.microsoft.com', skipped.
?<12-27-2014 23:47:47> INFO: The rule 'Windows Failover Cluster' has been run on server 'SecondarySite2.microsoft.com', skipped.
?<12-27-2014 23:47:47> INFO: The rule 'Pending system restart' has been run on server 'SecondarySite2.microsoft.com', skipped.
?<12-27-2014 23:47:47> <<<RuleCategory: Dependent Components>>>
?<12-27-2014 23:47:47> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    Microsoft XML Core Services 6.0 (MSXML60) for distribution point;    Passed
?<12-27-2014 23:47:47> INFO: The rule 'IIS service running' has been run on server 'SecondarySite2.microsoft.com', skipped.
?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    IIS HTTPS Configuration for distribution point;    Passed
?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    Administrative rights on distribution point;    Passed
?<12-27-2014 23:47:48> ***************************************************
?<12-27-2014 23:47:48> ******* Prerequisite checking is completed. *******
?<12-27-2014 23:47:48> ***************************************************
?<12-27-2014 23:47:48> INFO: Updating Prerequisite checking result into the registry
?<12-27-2014 23:47:48> INFO: Connecting to SecondarySite2.microsoft.com registry
?<12-27-2014 23:47:50> INFO: Setting registry values
ConfigMgrPrereq.log-End
Well my question is what would be the best solutions as it bugs me for days now.
Regards,

Hello,
?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;
SQL Server sysadmin rights;    Error;
Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions.
Setup cannot continue.
Did you install SQL server with a local account?
?<12-27-2014 23:41:27> SecondarySite2.microsoft.com;
Parent/child database collation;    Error;
The collation of the site database does not match the collation of the parent site's database.
All sites in a hierarchy must use the same database collation.
Try this blog:
http://jthys.wordpress.com/2012/04/02/sccm-2012-required-sql-server-collation/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Service Manager 2012R2 - Hotfix for Service Manager 2012 SP1 secondary Management server

Similar Messages

Maybe you are looking for