Service Master Agreement Type
Hi all,
We have an requirement for using the service master agreement type for one our project.
Can anyone help in undertanding this agreement type.
Regards,
Priya
Hi
Service master agreement type is nothing but agreement with sub agreements. SAP here suggest that you treat service as a sub agreement thereby keeping track of various milestones etc. However in SAP ECC services are not individual contracts rather there is a seperate master data component (service master).
Since there is no integration, decision you need to make is whether you want to treat service as an individual sub agreement or a material in e sourcing as there is no seperate master data component for services in e sourcing. Based on business requirement you can proceed further.
Regards
Mudit Saini
Similar Messages
-
Transfering Between CLM Master Agreement Folder Types
Hello,
How do I transfer a CLM master agreement to another CLM master agreement folder type? For example, an existing CLM Legal master agreement will need to be transferred to a CLM HR master agreement (using the new HR master agreement type numbering table).
Thanks,
AdrianHi Adrian,
If I understand your requirement correct, you would like to convert Master Agreement created from Legal Master Agreement type to a new HR Master Agreement.
CLM does not allow to change the Master Agreement Type i.e. the Document type, once the MA is created.
You will need to create a new MA using the HR Master Agreement type, if it has been already defined/configured in the MA Types.
I hope this helps.
Regards,
Parankush -
A link to create master agreement in a user defined object
Hi guys,
We have a requirement wherein we need to put a toolbar link in a UDO to create a master agreement. Certain fields from the UDO needs to be carried over to the master agreement.
Any pointers would be extremely helpful..hi reshma,
Here is the code for contract creation. Please Note: Other mandatory fields, depending on your MAster agreement document type has to be set before you save the Contract.
contractHome =IBeanHomeLocator.lookup(session, ContractIBeanHomeIfc.sHOME_NAME);
//Creates a contract bean. The input parameter is an Master Agreement type
contractBean = contractHome.create("master agreement typet");
/Set the Required fields in the contract/
//example to set few fields
valueTypeHome=IBeanHomeLocator.lookup(session,ValueListTypeIBeanHomeIfc.sHOME_NAME);
valueTypeBean=valueTypeHome.findByExternalId("master_agreement_status");
valueBean=valueTypeBean.getCollnValueListValue().get(0);
contractBean.setStatusRef(valueBean.getLocalizedObjectReference());
//set display name
contractBean.setDisplayName("Test"+doc.getDisplayName());
//Set currency
contractBean.setCurrency(doc.getCurrency());
//set effective date
contractBean.setEffectiveDate(TypeFactory.createSysDate(new java.util.Date()));
//set base date
contractBean.setBaseDate(doc.getBaseDate());
//set contact info
vendorCollection = doc.getCollnVendors();
vendorRef=vendorCollection.get(0);
contact=vendorRef.getContactObjRef();
contractBean.dbSetContactRef(contact);
contractBean.dbSetVendorRef(vendorRef.getVendorObjRef());
/Set other necessary information in the contract bean/
//Save the Contract
contractHome.save(contractBean); -
Service master for freight, pallet charges instead of SD Condition types
HI SD experts,
In our project, we are using service master (eg: MDELIVERY etc.,) for capturing delivery charges instead of SD condition type.
Now, we are considering to change the practice and use SD condition type instead, for delivery charges. This is required now, since we are planning to post from SD to CO-PA.
What am trying understand is, why service masters are used in the first place instead of SD condition type for delivery charges? Could some one through some light from logistics perspective on what is the logic for using service masters.
Thanks for your time.Hi,
I suggest you go for SD condition,
Add one more frieght condition in your existiong pricing procedure, and you can flow this condition value to COPA.
If you want to bill actual fright charges to customer in addition of material price then you have to explore TRANSPORTATION Module.
Kapil -
SERVICE PO using service master and service PO using Material Type DIEN
Dear Gurus can you differenciate between SERVICE PO using service master and service PO using Material Type DIEN ?
Regards
Vinod Suresh KakadeHi,
Material type DIEN is used for when you offer "SERVICE" to your customer.
When you are procuring "SERVICE" from your vendor, you can use external service management where service master is used (Steps are PO created in ME21N with Item Cat. "D" with Acc. ***. Cat. "K" or "C", ML81N, MIRO & F-53).
In Standard DIEN material type designed for Sales usage only, but you can use DIEN for Purchase also to avoid External Services Management.
Regards,
Biju K -
Service master and material type 'service'
Hi everybody.
I am a bit confused about "Service"
There is a service master that we can use to store and procure service.
Also we can use material master to store 'service' using material type 'service' and procure service in that way.
I want to know what is the difference between the two ? When shall I use what ?Hi
If you do not want to use 'External Service Management', you can use materials of type Service (DIEN).
This will be similar to any other account assigned material PO with free text. Instead of using free text, you are using material master and also helps you in identifyign service purchases from other material purchases. You will not use item category 'D' in this case. You do GR here.
Service masters are used when you use item category 'D' ('External Service Management'). There are additional flexibility of defining service specifications, service outlines, using service entry sheet etc here.
Best regards
Ramki -
Service Master vs. Material Master - Type DIEN (Service)
We currently use Material Masters (type: DIEN) for procurement of all external services. I've been told it wasn't a good practice and that Service Masters should be adapted for this purpose. Is that so? I am now preparing a business case for implementation of Service Masters. What benefits are there for using the Service Masters and Service Type Purchase Orders instead of DIEN Material Masters?
Hi,
Material type DIEN is used for when you offer "SERVICE" to your customer.
For procurement of service from vendor you can use process of External Services Management where you have service master (AC03). In this process Purchase order/Service order( you can have separate PO document type)created with Acc. assignment ' K' ( or C or P of F as requirement) and Item category 'D' , the system automatically pick UOM is "1" activity unit in Item Overview and in item details you need to maintain the service master ,UOM, quantity & price /unit and then G/L account with cost center created .
Next steps you create Service Entry Sheet (SES), here you are just recognizing vendor performed service where you can see cost object (cost center), quantity of service to be provided already & save the document. No FI document created after creating/maintaining the Service Entry Sheet but once you release the Service Entry Sheet, then only FI document created.
Now you can do MIRO with respect to Service Entry Sheet which already recognized and accepted.
Finally you can do payment to service vendor in F-53.
NOTE:
You can create u201CNu201D numbers of Service Entry Sheet (SES) with respect to Service order, till the all quantity received.
You can create MIRO w.r.t Service Entry Sheet and pay to vendor based on part service completed.
For more check the link:
How to make GL account field in SES to be made in display only
Regards,
Biju K -
Master Agreements fields carry over to child Agreement.
Hi,
How can I carry over the fields set in the master agreement module to a child agreement?
I believe I need to have a script definition on the creation of child agreement. but how can I get the reference to the master agreement fields? Any sample code?
Also if not for script definition is there any other way out?
Edited by: patsy lobo on Sep 22, 2008 7:35 PM
Edited by: patsy lobo on Sep 22, 2008 7:36 PMHI,
Adding to what Sudipta has said, you can also use the workbook technique for accomplishing these type of changes. That way you can achieve all hover text changes in one shot across all MA tabs.
The 2 main tabs in the wokbook to be changed are: 'Localized Resource' and 'UI overrides' tab.
As an example, suppose you want to add the following text for Master Agreement External Category field:
"This field is a classification hierarchy to describe the products or services of the event and/or agreement."
So in the Localized resource tab, fill out the following:
BUNDLE: custom
RESOURCE_ID: xxx
RESOURCE_KIND: APP_TEXT
DEFAULT_VALUE: This field is a classification hierarchy to describe the products or services of the event and/or agreement.
Then refer the same attributes in the UI Overrides tab:
UI_ID: contracts.agreement.ui.buyside.default
FIELD: EXT_CAT
ATTRIBUTE: Description
VALUE: Same as Resource ID used in localized resource (xxx above)
Hope this helps,
Vikram Shukla -
Unable to capture field values in Master agreement Line Items
I am trying to get the field values from master agreement line items page. I have written the following code to get the line item details which is working fine to capture part number and quantity->
agreementBean = doc.getRootParentIBean();
lineItemCollection = agreementBean.getLineItems();
collectionsize = lineItemCollection.size();
for(i=0;i<collectionsize;i++){
collectionbean = lineItemCollection.get(i);
partNum = ""+collectionbean.getPartNumber() ;
Quantity = ""+collectionbean.getQuantity();
throw doc.createApplicationException(null,partNum + " , " + Quantity );
Now, my problem is that I am unable to capture the following field item values in the master agreement > line items page.
1. Price Unit
2. Unit Price
3. Product Category
4. Plant
Please help me to find the values.
Thankx in Advance.
Su
Edited by: subrataindra on Aug 10, 2010 11:11 AMThis will return the name of the plant.
.getExtensionField("PLANT").get().getDisplayName(session);
Check if this returns the product category
collectionbean.getExtensionField("ITEM_CAT").get().getDisplayName();
This will Return the Price
collectionbean.getExtensionField("PRICE").get().getPrice();
(return type :BigDecimal)
This will return the currency
collectionbean.getExtensionField("PRICE").get().getCurrency;
(Return type:String)
Similarly to retrieve other fields for which there are no standard functions, use .getExtensionField("Field ID")
Hope this helps
Regards,
Immanuel -
BOM in Scheduling agreement (Type LZ)
HI
I am using scheduling agreement (Type LZ) for maintaining my sales plan for a period of 4 months. (1st one month - daily & subsequent months as weekly requirements). Ii would create delivery and invoices for each supply.
Pricing previously was based on the finished product (basic price for product was available). SO there was no problem.
<u>New requirement:</u>
finished Product above - is made up of components. Now, price should be derived from components. For this I have enabled SD Bom for my finish product.
But the problem is when i use the Finish product code in scheduling agreement type LZ, the BOM doesn't explode (it explodes in other scheduling agreement types, say LP)
Clarification:
1. Is it possible to calculate price of the higher level material by summing up the components' price?, with out BOM explosion
2. Is BOM explosion possible in scheduling agreement with delivery schedule (LZ).
Note:
1. Necessary settings for item category & BOM master already in place.
2. BOM is exploding in sales order and other sheduling types, except doc type LZ.If it is maintained as error message, it does not allow me to maintain delivery schedule more than target quantity of 100 EA. Also the overdelivery tolerance is maintained as 20 %, so it should allow me to maintain delivery schedule of 120 EA, but it does not allow me to maintain greater than target quantity of 100 EA. Please let me know your comments.
-
Creation of Service Master Record (Furniture and Fixture Maintenance)
Hi,
I want to create a Service Master for "Furniture and Fixture Maintenance".
What should I keep in mind while creating a Service Master Record.
Would like to know the about the following fields which seems to be useful:
Activity Number:
Base Unit of Measure:
Material Service Group:
Division:
Valuation Class
Service Type
Is there any other fields which I should keep in mind.
Regards,Thanks Murgun for the reply.
Sorry for late response from my side.
1. What is use of Service Category. Do we need to use the default or we need to configure as per our requirement.
2. while creating Service Order, we need to enter Single Short Text in Item & Multiple Short Texts in Item Details. What is the actual use of providing Multiple Short Texts in Item Details.
3. Can we use the Service Master in both in Item Short Text & Item Details Short Texts.
Regards, -
html,body{padding:0;margin:0;font-family:Verdana,Geneva,sans-serif;background:#fff;}html{font-size:100%}body{font-size:.75em;line-height:1.5;padding-top:1px;margin-top:-1px;}h1{font-size:2em;margin:.67em 0}h2{font-size:1.5em}h3{font-size:1.16em}h4{font-size:1em}h5{font-size:.83em}h6{font-size:.7em}p{margin:0
0 1em;padding:0 .2em}.t-marker{display:none;}.t-paste-container{;left:-10000px;width:1px;height:1px;overflow:hidden}ul,ol{padding-left:2.5em}a{color:#00a}code, pre{font-size:1.23em}
I get this message on two different machines installing SQL2014 developer edition, a Windows 7 and a Windows 8 machine. Both machines have SQL2005 through SQL2012 developer machines installed and working great. I have tried uninstalling all SQL2014 stuff and
installing again making sure I was running as an Administrator to no avail.
How do I look at sys.key_encryptionswhen the server will not start to finish installation?
The links in the log only provide the "We're Sorry" message.
This is the first error dialog info
TITLE: Microsoft SQL Server 2014 Setup
The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254026
The SQL Server error log has the message in the title.
2014-04-04 17:02:17.49 Server Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-04-04 17:02:17.49 Server UTC adjustment: -4:00
2014-04-04 17:02:17.49 Server (c) Microsoft Corporation.
2014-04-04 17:02:17.49 Server All rights reserved.
2014-04-04 17:02:17.49 Server Serverprocess ID is 9236.
2014-04-04 17:02:17.49 Server System Manufacturer: 'Hewlett-Packard', System Model: 'HP EliteBook8760w'.
2014-04-04 17:02:17.49 Server Authentication mode is MIXED.
2014-04-04 17:02:17.49 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Log\ERRORLOG'.
2014-04-04 17:02:17.49 Server The service account is 'NT Service\MSSQL$SQL2014'. This is an informational message; no user action is required.
2014-04-04 17:02:17.49 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\mastlog.ldf
2014-04-04 17:02:17.49 Server Command Line Startup Parameters:
-s "SQL2014"
-m "SqlSetup"
-Q
-q "SQL_Latin1_General_CP1_CI_AS"
-T 4022
-T 4010
-T 3659
-T 3610
-T 8015
2014-04-04 17:02:17.79 Server SQL Server detected 1 sockets with 4 cores per socket and 8 logical processors per socket, 8 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2014-04-04 17:02:17.79 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-04-04 17:02:17.79 Server Detected 8142 MB of RAM. This is an informational message; no user action is required.
2014-04-04 17:02:17.80 Server Using conventional memory in the memory manager.
2014-04-04 17:02:17.92 Server Default collation: SQL_Latin1_General_CP1_CI_AS (us_english1033)
2014-04-04 17:02:17.95 Server Perfmoncounters for resource governor pools and groups failed to initialize and are disabled.
2014-04-04 17:02:17.96 Server Query Store settings initialized with enabled = 1,
2014-04-04 17:02:17.97 Server The maximum number of dedicated administrator connections for this instance is '1'
2014-04-04 17:02:17.97 Server This instance of SQL Server last reported using a process ID of 8760 at 4/4/2014 5:02:08 PM (local) 4/4/2014 9:02:08 PM (UTC). This is an informational message only; no user action is required.
2014-04-04 17:02:17.97 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-04-04 17:02:17.97 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-04-04 17:02:18.00 Server Database Mirroring Transport is disabled in the endpoint configuration.
2014-04-04 17:02:18.00 spid7s Warning ******************
2014-04-04 17:02:18.00 spid7s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-04-04 17:02:18.01 spid7s Starting up database 'master'.
2014-04-04 17:02:18.02 Server Software Usage Metrics is disabled.
2014-04-04 17:02:18.07 Server CLR version v4.0.30319 loaded.
2014-04-04 17:02:18.11 spid7s 8 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2014-04-04 17:02:18.24 spid7s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2014-04-04 17:02:18.25 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2014-04-04 17:02:18.26 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2014-04-04 17:02:18.34 spid7s Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.
2014-04-04 17:02:18.40 spid7s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2014-04-04 17:02:18.40 spid7s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2014-04-04 17:02:18.44 spid7s SQL Trace ID 1 was started by login "sa".
2014-04-04 17:02:18.44 spid7s Server name is 'TOMGROSZKO-HP\SQL2014'. This is an informational message only. No user action is required.
2014-04-04 17:02:18.46 spid16s Error: 17190, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s Initializing the FallBackcertificate failed with error code: 1, state: 20, error number: 0.
2014-04-04 17:02:18.46 spid16s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-04-04 17:02:18.46 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s TDSSNIClientinitialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-04-04 17:02:18.46 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s TDSSNIClientinitialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-04-04 17:02:18.46 spid16s Error: 17826, Severity: 18, State: 3.
2014-04-04 17:02:18.46 spid16s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-04-04 17:02:18.46 spid16s Error: 17120, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s SQL Server could not spawn FRunCommunicationsManagerthread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
And a copy of the install log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-04-04 16:23:39
End time: 2014-04-04 17:06:25
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: TOMGROSZKO-HP
Machine processor count: 8
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2005 SQL2005 MSSQL.1 Database Engine Services
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 SQL Server Replication
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 Full-Text and Semantic Extractions for Search 1033
Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 SharedTools
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.2 Analysis Services
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.3 Reporting Services - Native
1033 Developer Edition (64-bit) 9.00.1399.06 No Yes
SQL Server 2005 DTS
1033 Developer Edition (64-bit) 9.4.5069 No
Yes
SQL Server 2005 Tools
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsClient
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsClient\Connectivity
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument\BOL
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument\Samples
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 NS
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 Database Engine Services 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 SQL Server Replication 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 Full-Text and Semantic Extractions for Search 1033 Developer
Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSAS10_50.SQL2008R2 Analysis Services 1033
Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSRS10_50.SQL2008R2 Reporting Services - Native 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 Management Tools - Basic
1033 Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 Management Tools - Complete
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools Connectivity
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools Backwards Compatibility
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools SDK
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Integration Services
1033 Developer Edition 10.51.2550.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Database Engine Services 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 SQL Server Replication 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Full-Text and Semantic Extractions for Search 1033
Developer Edition 11.1.3000.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Data Quality Services 1033
Developer Edition 11.1.3000.0 No Yes
SQL Server 2012 SQL2012 MSAS11.SQL2012 Analysis Services
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSRS11.SQL2012 Reporting Services - Native 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Management Tools - Basic
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Management Tools - Complete
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools SDK
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 BIDS
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL Server Data Tools - Business
Intelligence for Visual Studio 2012 1033 11.1.3402.0 No Yes
SQL Server 2012 Integration Services
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 LocalDB
1033 Express Edition 11.1.3128.0 No Yes
SQL Server 2012 Master Data Services
1033 Developer Edition 11.1.3000.0 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Downloads\SQL2014\SQL\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SQL2014
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\SQLData\MSSQL\SQL2014\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.SQL2014\OLAP\Config
ASDATADIR: C:\SQLData\MSSQL\SQL2014\OLAP
ASLOGDIR: C:\SQLData\MSSQL\SQL2014\OLAP
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSOLAP$SQL2014
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: TomGroszko-HP\Tom Groszko
ASTEMPDIR: C:\SQLData\MSSQL\SQL2014\OLAP
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, MDS
FILESTREAMLEVEL: 3
FILESTREAMSHARENAME: SQL2014
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQL2014
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQL2014
INSTANCENAME: SQL2014
ISSVCACCOUNT: NT Service\MsDtsServer120
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer$SQL2014
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: C:\SQLData\MSSQL\SQL2014\Backup
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQL2014
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: TomGroszko-HP\Tom Groszko
SQLTEMPDBDIR: C:\SQLData\MSSQL\SQL2014\Engine
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: C:\SQLData\MSSQL\SQL2014\Engine
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: Documentation Components
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\SystemConfigurationCheck_Report.htm
Any suggestions for what step to take next will be appreciated.
Thanks
Tom G.Hi Tom,
Sorry for the delay. We can exclude the media factor since you were able to install it on VM with this media.
If I understand correctly, Shanky said “Abve message can also appear due to corrupt profile so deleteting old profile and creating new one and using this to install would also help.Make sure you always RK on setup.exe and select run as administrator” which
means your user account may be corrupted rather than the Virtual account. You can create a new Windows user account and use it to log into the system. Then, re-try the installation.
Additional information:
http://windows.microsoft.com/en-us/windows/create-user-account#create-user-account=windows-8
Thanks.
Tracy Cai
TechNet Community Support -
How to change the standard query "Create a Master Agreement" by a custom one
Hello Sourcing CLM experts,
I would need to replace the standard query displayed when the user tries to create a Master Agreement by a custom query to filter the MA types according to some criteria:
According to this post: Re: Create security profile for a document template in SAP Sourcing, I've tried to achieve it by doing the following steps:
Create a new query as a copy of exsiting query FCI-ContractTypes
Modify query group FCI-ContractTypesBP to include my custom query instead of the standard one to only list the MAType "Standard Master Agreement"
Following you can see the change done into the query group FCI-ContractTypesBP:
However, standard query has not been replaced and same set of MA Types are listed.
Therefore, I would like to ask you:
Is it possible to do this kind of modifications? If so, which query group need to be modified?
If it is not possible, is there any other way to achieve that requirement?
Thanks in advance for your time and support!
Best regards,
IsaacHello again experts,
If this query cannot be modified, is there any option to disable button below? Or at lease, to disable the query group to avoid the listing of MA Types when it is pressed?
The reason is because we are going to set up the system in the way that only it will be possible to create Master Agreements from Template. However, if user keep on using that button he will be able to create MA from document types.
Any ideas?
Thanks again and best regards,
Isaac -
Service Master and Material Master relation
Hi Friends,
Our client requirement is to procure and sale same services.
and client wants to post the services to different G/L accounts for ex: if I am raising a sale order or Purchase order,
then for each different service line item to be posted to different G/L accounts.
Initially I thought of creating the service master with different valuation classes but when the same thing comes to sales then with service master they cannot create the sale order.
Hence kindly advice in this case whether to go with the service master creation and create the PO's with the service masters
or go with the creation of material master with the services material type with different valuation classes?
Thanks in Advance.
regards,
Sasi Kanth JHi,
For services the concerned entries have to be maintained in table T030.
The system will then suggest the G/L accounts as per the valuation class
maintained in table T030 (Standard Accounts Table, transaction OBYC).
The system will determine the
G/L account depending on the following criteria:
T001K-BWMOD
BKLAS
T001-KTOPL
T163K-KOMOK
Services level is one level below materials, which results in
some inherent restrictions compared to materials. In case of
services the values have to be maintained in the table T030.
Regards,
Edit -
DIEN vs. service master record
Hello gurus,
I know there are two ways of maintaining master data for services:
- Material master records with material type DIEN
- service master records
Now, what are the pros and cons of each alternative?
One thing I found out is that if I use DIEN-materials there is no way to record the provision of the service because there can be no goods receipt for DIEN-materials, correct?
What factors did I miss?
Thanks
AliciaThank you to both of you,
first of all, Kishore, you are perfectly right: A goods receipt can be performed for DIEN-materials, too. I got that one mixed up with service items in purchasing orders.
But then, the two answers unfortunatlly are a little contradictionary. In my view DIEN-materials can be used for procurement, too. So the sole difference for the process is that service master records are more detailed in reference to recording what exactly has been done and how long it took?
That means, if I only nead a means to record if a service has been provided or not (without recording any times etc.), DIEN materials are sufficient, correct?
Thanks again
Alicia
Maybe you are looking for
-
Safari keeps logging me out...
I have had this problem ever since the update. I log into my websites and within 10 mins I am logged out and have to keep logging back in. Anyone else have this problem? I am using Leopard 10.6.3... Safari 4.0.5... Macbook Pro. Help!?!?!
-
How do I print the first page first?
Why does my printer print back to front since I downloaded Adobe Reader? How can I fix it? I want it to print first page first, not last page first.
-
Need USB 3.0 driver for Windows 7 running in Fusion
Greetings - I have a MacBookpro Retina that is about 3 weeks old. So far it is running fairly well. I have installed Fusion5 and am running Windows7 Ultimate 64 bit. I have run into an issue however with my WD my passport 2tb USB3.0 drives. t
-
Re: Best buy pc app error (digital download) please help
Yesterday, I also purchased the game FEAR 2 Project Origins Windows Digital Download. It's in my Digital Library and when I click Download Now, I'm getting a pop up asking for a folder to download it to. When I try to save it to *any* folder (existin
-
Directory related functions in LrFileUtils
I've been wanting an "isDirectory()" function for LrFileUtils. Consider this a request to add such in the future. I've been trying to fabricate something similar from the existing APIs in the meantime. In the process I have discoverred the following