Service Master Integration from ECC

Hi,
We are on Extended Classic Scenario and we are wondering if we are able to use the Service Master which is replicated from the ECC and use it when creating a Service Type Shopping Cart?
We managed to get the Service Master into SRM and visible in COMMPR01 however when we raised a Service Type SC, we are unable to select the Service although the search help for the Service ID managed to return the result and once click OK, the Service ID is not in the SC. Error message "Product &1 does not exist; check your entries" /SAPSRM/PDO_SC 012.
Anyone knows if the above are possible and if yes, are there any pre-req for this to happen?

Hi Elham,
Thanks for the reply as we have already managed to resolve the issue. The issue is due to some of the enhancement which we have done previously on the material which has caused the service master not being able to be selected into the SC. We have identified it and fix it.
Regards,
Tiang.

Similar Messages

Material/service master catalog upload (ECC-CCM)

SRM have 2 possible scenarios to upload the material master data to CCM:
1- Upload material master data from ECC to SRM and, after, from SRM to CCM.
2- Upload material master data directly from ECC to SRM.
Does anybody know the name of the transaction or report in ECC to upload the material/service master catalog directly to CCM?
Best regards,
Cristiano Soares

Hi All-
I have about 3 tricky questions concerning CCM-ECC Integration
1.) Does anybody have any idea on how to upload Material and Service master from ECC 6.0 directly into the CCM 2.0 system. Is there any standard program like we have in SRM called as BBP_CCM_TRANSFER_CATALOG. I
2.) Also are there any complications or is it possble to integrate CCM 2.0 directly from ME51n? I am aware that PM and PS out-of-the-box can be directly integrated to CCM. Is there a similar way to achieve this functionality. If yes can anybody give me some pointers on this.
3.) Are there any complications involved with uploading service masters and interfacing CCM to EBP or ECC and directly using the service master from CCM to create a Shopping cart (CCM-EBP) or a purchase requisition (CCM-ECC).
I hope some one can throw some light on these questions.
Suitable points will be rewarded for helpfull answers !!
Thanks,
Sundeep

Modify vendor number when replicating vendor master data from ECC to SRM

Hi,
Is there a way to modify vendor number(manually input vendor number e.g. from a file) when replicating vendor master data from ECC to SRM using the vendor master data user exit (SAPMF02K)?
Does anyone have documentation on the user exit, how do I use it??
Thanks and Regards'
David

Hi David,
Please go through the link below:
[Enhancement SAPMF02K Vendor Master Data - question about LIFNR;
Regards
Anirban

How to map service contract data from ecc to crm

Hi Experts,
Please help me,how to map service contract data from ecc to crm system.
is there any perticular process.please let me know.
thanks in advance..

Hi Srinivasulu,
Create the service contract type of ECC and also item categories under it in ECC in CRM. Map the number ranges.
Check the Partners mapping from R/3 to CRM and that will be all.
I tried but in CRM in the transaction type internal number range is mandatory. So, if you create service contract in ECC with one number it will replicate to CRM but with different number. But you can see ECC number under the transaction history in CRM.
Good Luck.
Sharath.

Downloading Material Master data from ECC to CRM

Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.

Hi Rghunandan,
To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
First download the customizing objects using R3AS
DNL_CUST_PROD0 u2013 Material number conversions
DNL_CUST_PROD1 u2013 Product : Categories
DNL_CUST_PROD3 u2013 Material : R/3 sales status
DNL_CUST_SPROD u2013 Sales product item
DNL_PLANT - Plant
To download products foll the steps below
1.Defining Product ID Settings -COMCPRFORMAT
Cross-Application Components  SAP Products  Basic Settings  Define Output Format and Storage Form of Product Ids
This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
The material master length is R/3 is defined in transaction code OMSL and is set to 18. (also check note no. 545824)
2.Make sure that CRM item categories and R/3 item categories are the same.
In CRM, item categories and item category groups are seen via
Customer Relationship Management  Transactions  Basic Settings
3.Selecting specific objects for replication : R3AC1
Use adapter object MATERIAL
Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
4.Replicate Materials : R3AS
mention the adaptor object Material and execute
Regards
Itty

Request Download for Master Data from ECC to CRM resulting in "Wait" Status in R3AR3

Hi All,
I have created request download in R3AR2 transaction to download master data for a particular Business Partner from ECC to CRM.
But after I execute the request in R3AR4 transaction and check its status in R3AR3 transaction, it always states as "Wait".
Please help me as to how to resolve this issue.
Thanks in advance,
Shubham

Hi Shubham,
Please check the queues in SMQ2 and what status they are showing?.
Thanks,
Faisal

Customer Master download from ECC 6.0 to CRM 7.0

Hello Experts,
We have an issue where the DELTA DOWNLOAD of a customer master is not working. Also, no BDoC is getting generated when the new customer is created in ECC.
This happens sometimes and not always. Any specific settings or any SAP NOTE on this?
Kindly help.
Regards

Hello,
Since you've mentioned that this issue takes place only sometimes, I guess the TBE31 events are fine then. Probably have a look at SMQ1 of the ECC and check if the queue pertaining to CUSTOMER_MAIN is stuck somewhere.
Just cross check if settings in tables CRMCONSUM and CRMRFCPAR are proper.
Regards,
Rohit

Importing master role from ECC into portal throws derived role exception

Hello,
While uploading master and derived role from backend system into the portal I am getting the following exception.
com.sap.portal.pcd.rolemigration.RoleMigrationException: Nested Exception. Failure to execute native function. Nested Exception. ROLE_IS_DERIVED
Does it imply that the derived role is already imported with the import of master role and there is no need to explicitly import the derived role?
The landscape uses role upload tool of portal for UME.
Regards
Pooja

Hi Pooja,
There is a limitation with the role upload tool that the derived roles cannot be uploaded.
The migration is only able to upload roles which have their own menus. Derived R/3 roles does not have menus themselves as they derive them from other roles. The purpose of the migration is to bring the R/3 navigation structures into the portal. Therefore you can only migrate the role from which your role is derived.
Regards
Anja

Limit service purchase order from ECC TO sus

hi,
while creating confirmation in sus, LIMIT Line is missing(MM-SUS scenario)
and there is no table items for confirmation.
but from EBP-SUS scenario limit line is appering for
confirmation.what needs to be done for getting limit line.
regds
Rami

Hi,
What method are you using to transfer PO from MM to SUS.
Hope you are using the new method in MM via badi : Material management->purchasing->Enterprise services(purchasing)->BADI: Selection of Outbound Enterprise Services of Purchaser Orders
You also need other configuration steps. Please check your solution manager content for detials.
I think limit will be supported in SUS only if you use the above method
Regards
Sam

Initial down load of service master

hi,
my issue is related to service master tranfer from ECC to EBP.
i have done all load objects for service(Basis3,PROD0,PROD1,SRVMAS,SERVICE MASTER)
Internal number(numeric) is not tranfering but external number
(alpha numeric) is tranffering.
when i am downloading service master(having internal no range
in ECC (numarical) even though Bdoc status and queue is successful
service master is not replicated. and also i am not gertting any error in
SMW01 or SLG1 or R3AM1.But if service master is external (having alpha-numarical)
service master is replicating and there is no issue.
is any body face this issue?
regds
Rami.

Check the tx R3AC1 >> Filter settings of SERVICE_MASTER and take a look if you range is avaleable in the Object filter settings.
Rgs,
Pedro

Access Material Master from ECC 6 via PI

Hi everyone,
I am very new with SAP PI. I hope someone here could give me a guidance. I am trying to access the material master data from ECC 6 via SAP PI using web service. Is there any document for step by step instruction that I could follow?
It is much appreciate that someone could give me some hints.
Thanks,
Chris

Hi,
Check this link IDoc To Web Service Scenario
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
There is no weblog on IDOC to webservice. But u can have a look at blogs on RFC to webservice.
Then using above given Steps + weblogs u can build ur scenario.
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
Thanks!
Edited by: monica bhosale on Aug 26, 2011 10:08 AM

Publish a service from ECC 6.0 to Service Registry on PI 7.1

Hello All,
I've been trying to publish a service from ECC to the SR that has been configured on PI 7.1.
I've followed the below steps to configure the connectivity from ECC to PI.
1. On PI 7.1, created 2 destinations (UDDI_DESTINATION & CLASSIFICATION_DESTINATION) with http authentication (used admin user id with uddi_admin and service_registry_read_write roles assigned)
2. On ECC, created an RFC destination of type G to point to PI 7.1 with path prefix /ESRegistryWS/BasicAuthConfig?wsdl&style=document.
3. On ECC, assigned this RFC destination on LPCONFIG for proxy class CO_ESREGISTRY_WSSI and port LP_WORKPLACE.
4. On ECC, WSPARAM created a new UDDI registry entry with logical port name LP_WORKPLACE.
Next, I tried to publish a Z service from ECC (WSPUBLISH) to this new UDDI registry and I get a prompt to enter a user id and password for the service "/ESRegistryWS/BasicAuthConfig": I inputted the admin id which has uddi_admin and service_registry write access, but I got the below error:
Exception raised during physical system publication. Code : ''
Details:
10150 Invalid Response code (401). Server
<http://myhost.domainxyz.com: 50100/uddi/api/publish/> returned
message <Unauthorized>.
Spent a lot of time debugging and couldn't resolve it..Please help..

Thanks, Raja.
I've already assigned both roles (SERVICE_REGISTRY_READ_WRITE and UDDI_ADMIN) to an admin user ID on UME (PI 7.1). When I try to publish a service (Tx: WSPUBLISH) from ECC, immediately, I get a prompt to enter an id and password for the service "/ESRegistryWS/BasicAuthConfig" like I mentioned in the first post. I'm entering the ID I've configured on UME with those two roles assigned, but I get this error.
10150 Invalid Response code (401). Server
<http://myhost.domainxyz.com: 50100/uddi/api/publish/> returned
message <Unauthorized>.
Seems 100% an authorization error..but don't know what else to look for.
Thanks for looking into this and any other thoughts, you might have.

Can we transfer customer master from ECC to SAP AII

Hi Experts,
We need to transfer the customer master data from ECC to SAP AII ( Auto-id system ) through XI system. There seems to be no std XI content for doing this ( there is std content for sending material master ). I have found out an idoc type BUPAFS_FS_CREATE_FRM_DATA201 in both ECC and SAP AII system. I think I can use this idoc for transferring the customer master. But how do i triggere this idoc whenever the cusotmer is created or chnaged?? ( like for MM we have BD10 transaction to do this )
thanks
sankar

Hello,
I do not get what is the sending message type and what is the receiving message type.
The MaterialIn Message Type in AII is used when you do replicate material master data from ERP to AII.
In ERP You sent IDOC Matmas01 or AINMatmas ( I am not exactly sure about the name, but it is contained in the configuration guide for flex delivery scenario.
When in this replication the gtin field is not populated.
Check the following:
open master data -> product in AII and check if you do have a table containing UOM and GTIN displayed for existing product or that you can create your own product and defining UOM and gtin for that.
If this is not possible, you have not maintained the relevant set type and product configuration in AII. This is stated in config guide again.
Michael
Now I will be off for two weeks with no access to internet. Hope that helps.

Problem loading material master (IS Mill) data from ECC to BI

Hi Gurus,
We have a problem loading Material master data from ECC to BI 7.0 SP 18.
The scenario is :
The ECC is with IS Mill... due to which the Material field MATNR is of length 40 instead of standard 18 characters.
That is data element MATNR has 18 chars and its output length is 40 chars.
When is table MARA browsed using SE16, the material with more than 18 chars.... shows only first 18 characters and are ended with !.
OMSL setting shows length as 40.
When the extractor checker runs 0MATERIAL_TEXT or 0MATERIAL_ATTR it gives correct output ..... which is more than 18 characters... not ended with !
Till here no problem.
On BI side, after replication of the datasource, i checked data element MATNR ... but it has length as 18 chars and output length as 18 chars.
OMSL setting cannot be set more than 18.
Infopackage has pulled data till PSA successfully. I checked the PSA data .... here to the material with more than 18 chars is ended with !.
When the data is further pushed to 0MATERIAL infoobject, it throws following error for all materials irrespetive of its length (example below):
0MATERIAL : Data record 768 ('SIT_PL_B01L_10_01!E '): Version 'SIT_PL_B01L_10_01! ' is not valid
0MATERIAL : Data record 165 ('RLIRS52 E '): Version 'RLIRS52 ' is not valid
Diagnosis
Data record 768 & with the key 'SIT_PL_B01L_10_01!E &' is invalid in value 'SIT_PL_B01L_10_01! &' of the attribute/characteristic 0MATERIAL.
System Response
The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
I did search for SAP note related to this... but could not find any.
There is one SAP note (Note 960868) which mentions about this, but the correction was then shipped with BI SP 9.... we are running on SP 18.
Requesting you all experts for help.
Best Regards,
Deepak

Hi,
follow bellow steps:
1. you need to activate the Datasouce in BI side.
Goto RSA1> Datasource> Select Datasource> Double click> Check fileds and Activate.
2. Replicate the Datasource into BI side.
3. Check the RFC connections by useing SM59.
Regards.

Read Service Confirmation from ECC

Hi,
I would need to read the service confirmation details from ECC system particularly interested in ibase, component, product id information. I looked at this BAPI BAPI_BUSPROCESSND_GETDETAILMUL, which is unable to provide me REFOBJ, though this BAPI calls CRM_ORDER_READ inside, it is not loading REFOBJ and hence i will not get ibase, component, product id info related to Service Confirmation.
Is there any other way to read Service confirmation details from ECC.
Please provide me any related hints on this.
Thanks in advance.
Cheers, Satish

Hi all,
Any idea on this.
Thanks, Satish
Edited by: Satish Reddy Palyam on Aug 15, 2011 5:39 PM

Service Master Integration from ECC

Similar Messages

Maybe you are looking for