Service master Long text need to upload

Dear Expert
Service master Long text need to upload
I have entered in LSMW direct method object '0001'& method '0001' program name '/SAPDMC/SAP_LSMW_IMPORT_TEXTS'
and
object "ASMD"
ID "LTXT"   
TEXTFORMAT '*'
still shows error as invalid text object (check table TTXOB) how to rectify that?
Regards
karan

Problem solved.
thanks for your valuable answer
ASMD
LTXT  were I entered in small character. I changed that into caps, it become solved.
my final doubt is..?
text length will be for how much? and from where we can find the length
Regards
Baskaran

Similar Messages

  • Tracking of Service master LONG TEXT changes

    Hi ,
    I know we have functionality to track changes made in a Service master thru Change Documents .... but it doesn't show the changes made in SERVICE MASTER long text.
    How can we see those changes ?
    Regards
    shrey

    Changes to long text are not stored in CDHDR/CDPOS tables.
    You can only see that there was a change, but not what was changed in detail.

  • How to get the service master long text from the AC03

    Hi All,
    we are using the FM READ_TEXT  to read the long text for service master  which is maintained in AC03 ,Please can any one suggest me how to do the same.
    Get long description
    CALL FUNCTION 'READ_TEXT'
        EXPORTING
          id                            = LTXT
          language                = EN
          name                    =  '003000124'
          object                  = 'ASMD'
        TABLES
          lines                   = litab_line
        EXCEPTIONS
          id                      = 1
          language                = 2
          name                    = 3
          not_found               = 4
          object                  = 5
          reference_check         = 6
          wrong_access_to_archive = 7
          OTHERS                  = 8.
    Regards
    cb

    Hello
    Try this:
    CALL FUNCTION 'READ_TEXT'
        EXPORTING
          id                            = 'LTXT' " <- '' missed
          language                = 'EN' " <- '' missed
          name                    =  '000000000003000124' " <- 18 symbols must be here
          object                  = 'ASMD'
        TABLES
          lines                   = litab_line
        EXCEPTIONS
          id                      = 1
          language                = 2
          name                    = 3
          not_found               = 4
          object                  = 5
          reference_check         = 6
          wrong_access_to_archive = 7
          OTHERS                  = 8.

  • Service master Long Text Deletion

    Hi All,
    In AC02 when i am trying to delete the long text maintained for service master using the "Delete long text", system is giving error TD600: Text XXXXX( Service Numbaer) ID LTXT language EN not found".
    We are using ECC 6.0. Any idea why this is happening?
    PRegards,
    Prashant

    Hi Ramakrishna,
    Thanks for the reply.
    I have checked the settings and both the settings are maintained for both texts. But the problem persists. If you have ecc 6.0 available, can you check if you are  getting  the same error.
    Prashant

  • Service / Material Long text Repetation in PO Print,

    Dear ALL,
    I have a requirement where in the Service activities do have a Long text going up to 1 or 2 paragraphs, these long text gets printed in the POs getting created using this service activities,
    but we mainly have many service activities having the same long text  description, so when i use these 5-6 service activities in the PO, the service activity long text gets repeated 5- 6 times in the POs, it is filling the PO print page,
    can we have a check to restrict PO long text appearing in PO print so that it is not repeated, can we have a check and option to choose which text from Service activity to appear and which can be restricted, any check or tick box which allows to have or not have a specific Service / Material master basic data Long text in print outs.
    alternatively can we maintain Long Text at Material Groups level or is there any way to maintain and bring Long texts inside POs
    Thanks and regards
    S Kumar
    Edited by: KumarSAP&amp;SAP on Aug 23, 2011 10:38 AM

    Hi Kumar,
    Chek with  your ABAPer  to achieve the  Requirement ,  I think most of requirement can be achieve through the form  set up
    But i  doubt that you can maintain the long text in Material group level

  • Service item long text in PO

    Dear friends,
    I have to give service item long text in the smartform. please tell me how to ge.

    hi,
    First find out the TDOBJECT, TDID, TDNAME and language of the SERVICE TEXT for ITEM by
    double click on the text area,
    it takes you to a text editor,
    in that screen GOTO - >HEADER.
    there you will get all the above details.
    then in the Smartforms :
    Add a text node --> make it as INCLUDE text .
    then give the TDOBJECT , TDID , TDNAME and Language on the right side of the screen.
    the text will be displayed in the output.
    Vikki.

  • Long text problem while uploading Inspection plan through BDC.

    Hi,
    I am facing some problem while uploading the inspection plan. There are few MICs for which we are having long text, while uploading the inspection plan through BDC - some other long text is getting copied into the MIC's long text. After checking I came to know that in function module, read_text - some text which is stored in ABAP memory is getting copied into the inspection plan.
    I am working in SAP release 4.7. I have checked with SAP notes: 97419, but it is also not satisfying.
    Waiting for quick solution.
    Thanks in advance.
    Fahié

    Hi a®s,
    Thanks a lot for your kind reply.
    My requirement is I want to maintain long text for few MICs (which are not having long texts at MIC level) in inspection plan (QP01).
    When I am trying to manually assign the MIC's to inspection plan (QP01), long text is copied whereas I am not clicking the long text icon in (QP01). Long text is not maintained in MIC level, still some long text is copied to this MIC. This was also happening while uploading the inspection plan thro' BDC.
    I believe what you have mentioned about function module SAVE_TEXT cannot be used here since long text is already copied before we pass the long text. Also if we pass some long text, still apart from the long text what we have passed there is some other long text copied (extra long text).
    Waiting for quick solution.
    Thanks in advance.
    Fahié

  • Service entry short text needs to default in MIGO item text

    Dear SAP Gurus,
    How service entry short text can be default in MIGO item text,
    currently system is defaulting service text in Text filed in MIGO(MSEG - SGTXT )
    can any body let us know.
    Thanks in advance
    Vinod
    Edited by: Vinod Malagi on May 25, 2009 1:58 PM

    Hi Chakrapani,
    The functionality i am awere, in that while passing service entry sheet both service number and backend MIGO transaction will be called for MIGO transaction the service text from the service entry sheet needs to populate in MIGO text ,
    but the standard functionality is defaulting from item service text
    please suggest the same.
    VInod

  • Transfer of Service master short text  from PR to PO

    Hi All,
    We have a scenario where we use Generic service number to order one time services. Based on the requirement we keep on changing the short text (description) of the service master in PO or Purchasing requisition. The issue is - Short text on generic service master is changed in PR but it is keep on reverting to original short text as in service master while converting PR to PO. . 
    For Example :
    Service master - Code - 100001 - Description - "Generic Corp Miscellaneous Services"
    I created a PR, included service no 100001 and changed the description of short text to - "Fixing tiles at foyer". Now when I converted PR to Purchase order service description should transfer to PO. But it is showing as 'Generic Corp Miscellaneous Services'. After investigation I found it is coming from the Contract that is linked with the PR as source of supply. And if I removed the Contract from the source of supply short text transfers from PR to PO. So Contract get precedence over PR.
    The requirement is - short text of service master should transfer from PR even when source of supply is Contract. It means always transfer short text from PR to PO not from contract. Is there any user exit/ config or change to ABAP code is required.
    Any help is greatly appreciated.

    Hi
    If you have document management system active in your system and if it the document type of documnet (which you created in CV01N) has link object PO and PR. Surely it will be transafred from PO to PR. But if you have added document in service object in Me52N then it will never go to PO automatically.
    Thanks and Regards
    Antony

  • Service code  Long Text

    Hi,
    Is there any standard report or LIS available which gives the service code(AC03) : long text in report form..
    Regards
    Vikrant
    Edited by: VIKRANT HANDE on Dec 17, 2010 10:10 AM

    Hi,
    There is no standard report for showing that detail.  You have to develop your own report using the function module READ_TEXT where ID = LTEXT, NAME = Activity code with leading zeros for making the total length to 18, OBJECT = ASMD, LANGUAGE = Respective language
    Regards,

  • How to add long text in bdc for transaction fb01 ?

    IN the existing program of bdc fb01
    i have to add a long text field
    but it gets stuck while i process in sm35
    is there a fm to add the field directly
    thanks in a advance

    Hi
    You can upload the Long texts separately into the transaction using the CREATE_TEXT fun module
    Need to pass the correct parameters like OBJECT,ID, OBJECTNAME and LANGuage with the proper declarations.
    see the sample code and do accordingly
    REPORT zmm_longtext_sm
           NO STANDARD PAGE HEADING
           LINE-SIZE 255.
    Description :   This Program is used to Upload the Service Master
                 :   Long Texts using the Fun Module CREATE_TEXT
    Internal Table for Upload of Long Texts Data
    DATA: BEGIN OF itab OCCURS 0,
            asnum like asmd-asnum,    " Service No
            text  LIKE tline-tdline,  " Long Text
          END OF itab.
    To create Long Text lines for CREATE_TEXT function module
    DATA:BEGIN OF dt_lines OCCURS 0.
            INCLUDE STRUCTURE tline.   " Long Text
    DATA:END OF dt_lines.
    Variable declarations for CREATE_TEXT function module
    DATA : dl_name TYPE thead-tdname,   " Object Name
           dl_lan TYPE thead-tdspras.   " Language
    Constants
    CONSTANTS:
    Object ID for Long Text of Service Master
      c_best     TYPE thead-tdid VALUE 'LTXT',
      c_material TYPE thead-tdobject VALUE 'ASMD'. " Object
    Parameters
    PARAMETERS p_file LIKE rlgrap-filename.
    At selection-screen on Value Request for file Name
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    Get the F4 Values for the File
      CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          program_name  = syst-cprog
          dynpro_number = syst-dynnr
        IMPORTING
          file_name     = p_file.
    Start Of Selection
    START-OF-SELECTION.
    *To Upload Flat file
      CALL FUNCTION 'UPLOAD'
        EXPORTING
          filename                = p_file
          filetype                = 'DAT'
        TABLES
          data_tab                = itab
        EXCEPTIONS
          conversion_error        = 1
          invalid_table_width     = 2
          invalid_type            = 3
          no_batch                = 4
          unknown_error           = 5
          gui_refuse_filetransfer = 6
          OTHERS                  = 7.
    Upload the Texts
      SORT itab BY asnum.
      LOOP AT itab.
        dt_lines-tdformat = 'ST'.
        dt_lines-tdline = itab-text.
        APPEND dt_lines.
        dl_lan = sy-langu.
        concatenate '00000000000' itab-asnum into dl_name.
    Call the Function Module to Create Text
        CALL FUNCTION 'CREATE_TEXT'
          EXPORTING
            fid         = c_best
            flanguage   = dl_lan
            fname       = dl_name
            fobject     = c_material
            save_direct = 'X'
            fformat     = '*'
          TABLES
            flines      = dt_lines
          EXCEPTIONS
            no_init     = 1
            no_save     = 2
            OTHERS      = 3.
        IF sy-subrc <> 0.
          WRITE:/ 'Long Text Creation failed for Service No'(001),
                 itab-asnum.
        ELSE.
          WRITE:/ 'Long Text Created Successfully for Service No'(002),
                 itab-asnum.
        ENDIF.
        AT END OF asnum.
          REFRESH dt_lines.
        ENDAT.
      ENDLOOP.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Create Language specific text for Service MAster

    Hi All,
    Can Someone help me to maintain language dependent text for Service Master. I need to maintain it for different languages.
    Regards,
    Smita

    Hi,
    I assume you want to create long text . Do you want to mass upload ? If yes, you can use OMQ3 for mass upload.
    File format below. The program documentation has more information.
    /HTEXT
    /:OBJECT ASMD
    /:NAME I.900412
    /:ID LTXT
    /:LANGUAGE I
    /:FORM SYSTEM
    /:STYLE SYSTEM
    /:FIRST-USER xxxxx
    /:FIRST-DATE 05 29 2010
    /:FIRST-TIME 8 30 0
    /:TITLE 'Long Text upload for Service master'
    /M
    Operaio  3°/2° livello in orario notturno del Sabato e giorni festivi dalle ore 22:00 alle ore 06:00
    Hope this helps.
    Cheers !

  • Long Text in Service PO

    Hello Experts,
    In Service PO ,
    In Item Details , Service Tab there are two text columns, Service Text and  Line text.
    I want to increase the lenghth of that column so that i can mainatin the servcie details in that tab.
    Also i wanted to print the details on Printout also.
    If it is not possible , is there any other field where i can manatian the item details for services.
    Regards,
    SH

    Dear Brijesh,
    Similar to Shreya, but if I want to set the "Service Long Text" to "display only" when using ME21N/ME22N, is it possible to do so?
    I want this because I want user to maintain the service long text from Service Master and when this text copied from service master to service PO, this text must be in display only. If user want to add text, they should maintain the "Service Line Long Text".
    Is it possible to do that?
    Regards,
    Green Green

  • Loading Long text longer than 132.

    Hi,
    I am trying to load Material Master long text (Basic data, Purchase order Text) . The LSMW (a standard batch / direct input) for Long text only allows 132 chars and my long text is longer than 132?
    What can i use to load the long text?
    Regards,
    K.

    Hi
      Within the program, structure TLINE loads the text.
    This structure consists to fields TDFORMAT and TDLINE.
    The text exists in field TLINE-TDLINE.
    Whereever, we need to give extended text we can use '=' symbol for TDFORMAT. Just like in SAP Script Form(Extended Line).
    Alternatively you can use FM: SAVE_TEXT for loading the texts.
    Insert a convert routine to split the text in several lines.
    You can use the following function module to split your long text into multiple lines.
    QADB_DOCU_CONVERT_TO_SAPSCRIPT
    You can refer this link for further information
    Re: insert it into the next line in internal table
    Thanks.

  • How to activate Long Text of Order Header in IW31/32

    Hi Expert,
    I have one reqm. like want to upload Long Text in Order Header.
    I have used FM 'Create_Text', its working f9 i.e. creating Long Text for Order Header but not displaying it
    in IW32/33 transaction. Entry for Long Text is available in Table STXL and STXH.
    Please advice me how to activate that Header Long Text which I uploaded earlier.
    Thanks,
    Jay.

    Hi Madhukar,
    Yes I am passing everything correctly, as I am getting Long Text record created in Table STXL & STXH, but not able to see in IW32/33 at the header long text.
    So this is my doubt like how 2 update or activate long text of Order Header?
    Thanks,
    Jay.

Maybe you are looking for