Service Master - Unit of Measure

Hi all -
had a question about services and alternate unit of measure. On a service master, its not possible to specify alternate UoM (like we do in material master). What is the process to say create a service in minutes and create a PO in hours ?
any help would be appreciated.
thanks

Hi,
In service master we cant able to maintaint the AUM,
But the service maintainnsce on hourly or daily we have to decide.
Regards,
Andra.

Similar Messages

Automatically pick material master unit of measure conversion to routing

I maintain finish goods conversion factor in material master u201CAdditional Data: Unit of measureu201D as M to KG and basic unit of measure for finish good in material master is in KG.
I attached multiple operations for the finish goods material in routing.
Some operations base unit of measure is M and others its KG.
I want to pick material master unit of measure conversion automatically when Iu2019m creating routing for the finish good material in ca01. (Unit of measure conversion for header and operation of the operation)
Can anyone letme know the SAP configuration for this.

Hi!,
Please expalin about the purpose of this requirement, because when you will create a order using that routing, at that time system will definately do the unit conversion automatically.
Regards,
Uday

Material Master Unit Of Measurement Changes Clarification

Hi
We have a material master with base unit of measurement as FT in basic data 1 view.
For this we have already some purchsing documents like PO's and PR's
But currently we dont have any open PO (or) PR and stock in system.
Still we could not change the base unit of measurement from FT to M..
Why?
Vijay

Hello All,
The error shows some of PR's and PO's numbers.
when i check the material in table MBEWH i can see some of the stocks for previous period like year 2009 and the period 06 and some of the previous year like 2008 and 2007 also having some stocks.
Now advise.
Vijay

Service Master unit wise price

Hi friends
In one service master i want to maintain different unit rates like as
1 meter = 10 rs ,, 4 meters = 10 rs,, 6 mtr = 12 like i ll map to SAp
how this senario map to SAP and this service process will goto MIRO

hii
Its easy to do servcie order .. Pls dot make it complicated.
Because , here u are not going to purchase any material , only service u r going to do.
While doing service PO u can mention approximate value of total service .
Then once u cpmplete the whole service , what ever it may be , whethere , one sheet or 3 sheets , or ,.,.etc what u wnated to do the service u do the service .
Final u'll come to know how mucha service has been done , by the servicer.
Right , so here according do the service entry sheet and payment to the particuklar service .
Revert any clarification

Report for Units of measurement for Material

Hi
Is there any report to extract the alterante unit of measurements for materials in a plant.
Thanks

Hi,
Please use the below table,
Related to Materials:
MARA - Material Master: General data
MAKT - Material Master: Description
*MARM - Material Master: Unit of Measure*
MAPE - Material master: Export control file
MARC - Material master: Plant data
MARD - Material master: Storage location
MAST - Material link to BOM
MBEW - Material valuation
MLGN u2013 Material Master: WM Inventory
MLGT u2013 Material Master: WM Inventory type
MDIP - Material: MRP profiles (field contents)
MKOP - Consignment price segment (old versions of SAP)
EBEW - Valuation of sales order stock
QBEW - Valuation of project stock
MVER u2013 Material Master: Consumption <Plant>
DVER u2013 Material Master: Consumption <MRP Area>
MVKE u2013 Material Master: Sales <Sales Org, Distr Ch>
MLAN - Material Master: Tax indicator
MARC - Material Master: Plant data
MAPR u2013 Material Master: Forecast
MARD u2013 Material Master: Storage Location
MCH1 u2013 Material Master: X Plant Batches
MCHA u2013 Material Master: Batches
MCHB u2013 Material Master: Batch Stock
MDMA - MRP Area data
DBVM - MRP Planning File Entry: MRP Area
MOFF - Outstanding Material Master Records (Maintenance status)
MARCH - Material Master C Segment: History
MARDH - Material Master Storage Location Segment: History
MBEWH - Material Valuation: History
MCHBH - Batch Stocks: History
MKOLH - Special Stocks from Vendor: History
MSCAH - Sales Order Stock at Vendor: History
MSKAH - Sales Order Stock: History
MSKUH - Special Stocks at Customer: History
MSLBH - Special Stocks at Vendor: History
MSPRH - Project Stock: History
MSSAH - Total Sales Order Stocks: History
MSSQH - Total Project Stocks: History
Regards,
Mohd Ali.

Unit of measure EA not defined for language PT

Hello,
Vendor Communication is maintained in "Portuguese language-PT", while creation of Scheduling agreement system will given the below error, bcz Scheduling agreement will taken the Langause from vendr master
"Unit of measure EA not defined for language PT"
Table 006A contains no entry for this unit of measure.
We have cross checked Material master and maintained the "langauge-PT" in material master additional data.
Checked T006A table for "EA" found for language "EN, DE, CN etc. not for "PT" how to maintain T006A table for Portuguase langauge.
Regards
Mahesh Naik

>
Mahesh Naik wrote:
> Hello,
>
> Suppose we have changed the source langauge "EN" to Target Langauge"PT" is it change all the Unit from EN to PT. after that how the system will pick english language's
No, it just gives you all the units maintained in that source language as a proposal to enter the description in target language PT, there will not be any change to the source language EN while maintaining a translation.

Getting an error in CIF Inbound queue:"Only 0 decimal places are permitted for unit of measure PC"

Hi,
I am getting an error in CIF Inbound queue (function: CIF_ORDER_INBOUND_30A). The error text says "Only 0 decimal places are permitted for unit of measure PC".
Can anyone point out the solution to resolve this error? It would be a big help for me as I am new to APO and so getting difficult to find a clue for it.
Thanks.
Regards
Mansi

Hi Mansi,
Please check the cif queue you will get the order number from that order number you can find out material code. Then check the material master unit of measure in MM03 you have used some alternative unit of measure and system is unable to convert order to alternative unit of measure because of decimal setting. If you go to CUNI and check the unit if measure PC it is not permitted for decimal places. If you need decimal than change the UoMof Material and use diff UoM or allow the decimal for PC which is not good practice.
Regards,
R.Brahmankar

Third party purchase unit of measure issue.

Hi Friend,
I have created sales order for third party process unit of measure in sales order is in Meter qty is 3.7 mater.
But PR & PO id created in the unit of measure Piece i.e. 3.7 pieces.
GR is already done for qty 3 pieces. Now when user is trying to do GR for qty 0.7 pieces we are getting error message serial number management allows only whole number.
How can I do GR for this. Also I want to know what setting I need to do to have PO in unit of measure M i.e. Mater.
Thanks,
Kiran

Its all about your material master unit of measure.
In Material master - Basic data 1 view - Base Unit of measure will be picked in PR.
In Material master - Purchasing - order Unit will be picked in PO (If blank, then base unit of measure)
In Material master - Sales Organization 1 - Sales unit will be picked in Sales Order.
And for your error message, please search in SCN, you will get many thread regarding the error.
Regards
Dev

ME51n, ME21n Unit of measure F4 shows all units

Dear Gurus,
Transaction ME51n & Me21n
PR & PO line item Unit of Measure F4 show only commercial unit list. This is Ok.
But when we create Service PR or Service PO, the Item service details Unit of Measure F4 shows all Unit of measures (all entries in table T006) (commercial unit + other non commercial units).
Kindly inform why the Service detail Unit of Measure F4 show all the list.
Is it correct system behavior?
Thanks and Best Regards,
Mohan

i believe there is nothing worng with the system
as both are different table and moreover the data element for the field MIENS in both the tables is different
and i believe that reasons behind this is in case of service unit of measure can be a non dimenetional one as it is a functional requirement or a businees requirement
but in case if you order a material then in that case you need a specific and comercial unit of measurement
so as per my undersatanding nothing wrong in the system

Alternate unit of measure for service master

Dear all
I have same service but different unit of measure like hr, day, month, pls explain how make alternative unit of measure in service master?

Hello,
I am afraid I must confirm that the system is working in this way...
It is not possible to define an alternative unit of measure in the service master in R/3.
If you want to create a purchase order with another unit of measure, you have to create a seperate service master with this unit of measure.
Thanx & Sorry
Mauro

Purchase requisition unit of measure AU ( Activity unit) (Service PR)

Hi!!Group Members!!
When i create Service Purchase requisition from T code ME51N - Create
I select k as account assignment category & D as item category system by default shows AU as unit of measure system does not allow me to change
When i adopt the PR to PO same AU will be in gray & system does not allow me to change
Print out will be in days as service master & data for service is entered in days
Pleas give your valuable inputu2019s so that I can solve my query
Regards
Shamulheq

Hi11 Roy Anamika
Thank you
I checked below configration screen in my system & has Unit of measure at item level AU
SPRO -- MM -- External Services Management -- Source Determination and Default Values and chage the UOM at client level or purchasing org level
I dont want to change as it is defined @ client level, insted of changing here can i come to know the fild which had become supress ( gray ) in PR & PO
regards

Alternate unit of measure in service entry sheet,

Dear All,
I have created service master with unit of measure MON(MONTH), and I have entered alternate unit of mesure 1MON=30 DAYS,
I have created service PO with unit of measure MON, In service entry sheet the unit of measure is MON, I want to change the unit of measure to DAY, BUT in service entry sheet the unit of measure is MON and the filed is desabled, I cannot change the unit on measure to DAY, Please tell me how to change the unit of measure,
With regards,
ARABBAS

Hi,
Change of unit of measure in service entry is restricted as below
Since all data is updated in the base unit of measure, your entry is particularly important for the conversion of alternative units of measure. A quantity in the alternative unit of measure can only be shown precisely if its value can be shown with the decimal places available. To ensure this, please note the following:
The base unit of measure is the unit satisfying the highest necessary requirement for precision.
The conversion of alternative units of measure to the base unit should result in simple decimal fractions (not, for example, 1/3 = 0.333...).
So logically there is a constraint for what you are trying to do
Thanks
Diwakar

Material Master MATMAS IDOC and base unit of measurement

Hi
We are using SAP standard material master IDOC type MATMAS05 to trigger IDOC. Our material master is having base unit of measure as "G". We are not using ISO unit of measurement. But Material master IDOC, segment E1MARM is populating base unit of meaurement (MEINS) as "GRM".
Any idea why IDOC is picking ISO unit of measurement instead of material master base unit of measurement.
Any idea how to send base unit of measurememt as "G" instead of "GRM" in DOC segment.
Thanks
Nilesh

There are ISO codes for country keys, currency keys, units of measure and shipping instructions. According to SAP design guidelines, you should use ISO codes for an IDoc if they are available. When you set up the IDoc, the SAP codes have to be replaced by ISO codes.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf

Material Ledger Unit Of Measurement different from Material Master

Dear Team,
In my client, there is a difference between unit visible in CKM3N and MM03. The base unit of measurement in MM03 is MT. Other than that, there are some other units maintained (not M3) in additional data tab in material master. In CKM3N, the visible unit is M3. M3 is not present anywhere in MM03.
Why would such unit flow in material ledger table? (CKMLPP has unit M3). Please advise.
One more observation is that when there is some price change document in Material Ledger, the proper UoM (MT) is being captured. Only in the basic price determination structure visible unit for each head is M3. Please check the attached screen shot.
Any help would be appreciated.
Thanks.
Jay Shah.

Hi..
Refer to Data Inconsistency of BUOM in Material Ledger Tables

Material master-additonal unit of measurement

HI, I have three questions
a) we have the follwoing data defined in material master (additonal data)
X UOM Y UOM EAN
1 LITRES 1 LITRES NIL
1 IGB (inner packg) 20 LITRES 345922222222
1 GBE (packg) 20 LITRES 345922222222
I need to know what is EAN no and in our case the EAN no is same for both inner packg and pack. . what does this mean. Sometimes we also see the EAN no is different. why... what it signifies ?
2) We have outbound idoc trigerred from delivery. message type is WHSOD. in one of the segments (E1EDL24), the system shows the delivery qty and material no. This segment also shows the EAN NO AS 345922222222. In segment E1EDL26, the filed UMVKZ shows as 1 which is ok (numerator as shown above) but the numerator field shows 1 only (it does not show 20 litres,, i think the field name is UB something ).
I need to know why the system is not showing 20 litres in numerator in the filed for segment E1EDL26.
3) Had we have two different EAN in material master as above, did our standard message type would have shown the conversion factors (numerator and denomi ) as per the EAN nos.....If yes, then in which segments ,the WHSORD shows the Conversion factors based on different EAN nos in material master-UOM tab (for instance if 1 GBE (packg) = 30 LITRES and EAN IS 345911111111.... I think there will be as many segments in idoc as there are entries in Additonal data-UOM tab )
rgds
pamela

Hi Jurgen,
I think you did not understand. My questions is as follows.
a) why we maintain alternative UOM in material mastr (additional data) ? an example ould be good.
b) We have in our system base unit of masuement as litres and sales unit as blank. that means system will take sales unit of measurementt as litres only.
now we make sales order and make delivery and a outbound whsord idoc is sent to third party warehouse. the third party warehouse undertsands only IGB(pack ) unit of measure wherase our idoc i think will carry LT (litres ) as UOM...
we do maintain the conversion factor between litres and IGB in our material master (additional data tab).That is our idoc shud carry conevrsion factor as maintained in ur material maste ( 20litres =1 igb ). so our idoc shud carry .05 as conversion factor
so that our third party warehouse understands that and dispatch 1 IGB of qty (2 litres as per our delivery )
rgds
Pamela
Edited by: Pamela79 on Aug 11, 2011 4:49 AM

Service Master - Unit of Measure

Similar Messages

Maybe you are looking for