Service Master unit wise price

Hi friends
In one service master i want to maintain different unit rates like as
1 meter = 10 rs ,, 4 meters = 10 rs,, 6 mtr = 12 like i ll map to SAp
how this senario map to SAP and this service process will goto MIRO

hii
Its easy to do servcie order .. Pls dot make it complicated.
Because , here u are not going to purchase any material , only service u r going to do.
While doing service PO u can mention approximate value of total service .
Then once u cpmplete the whole service , what ever it may be , whethere , one sheet or 3 sheets , or ,.,.etc what u wnated to do the service u do the service .
Final u'll come to know how mucha service has been done , by the servicer.
Right , so here according do the service entry sheet and payment to the particuklar service .
Revert any clarification

Similar Messages

Service Master - Unit of Measure

Hi all -
had a question about services and alternate unit of measure. On a service master, its not possible to specify alternate UoM (like we do in material master). What is the process to say create a service in minutes and create a PO in hours ?
any help would be appreciated.
thanks

Hi,
In service master we cant able to maintaint the AUM,
But the service maintainnsce on hourly or daily we have to decide.
Regards,
Andra.

Service Master and the price

Hi ALL,
Here i have 2 different services ( service masters). I am maintaiong the price for these service items. However the cost of these service items is actually based on some other parameters e.g.
"Form a Slab" and "Form a Column" are 2 different services. Both has cement and the labour cost as cost components. When I change the cost of cement, we want that the cost of both the services should change based on the cement component in them.
How can we map this. Does Model Service specification or SSC will help for this?
Regards,
Prashant

Hi
If you mainatin the condition type for cement in the PO line item Conditions tab instead of services then this will effect both the services in the PO line item.
Thanks & Regards
Kishore

Service Master vs. Material Master - Type DIEN (Service)

We currently use Material Masters (type: DIEN) for procurement of all external services. I've been told it wasn't a good practice and that Service Masters should be adapted for this purpose. Is that so? I am now preparing a business case for implementation of Service Masters. What benefits are there for using the Service Masters and Service Type Purchase Orders instead of DIEN Material Masters?

Hi,
Material type DIEN is used for when you offer "SERVICE" to your customer.
For procurement of service from vendor you can use process of External Services Management where you have service master (AC03). In this process Purchase order/Service order( you can have separate PO document type)created with Acc. assignment ' K' ( or C or P of F as requirement) and Item category 'D' , the system automatically pick UOM is "1" activity unit in Item Overview and in item details you need to maintain the service master ,UOM, quantity & price /unit and then G/L account with cost center created .
Next steps you create Service Entry Sheet (SES), here you are just recognizing vendor performed service where you can see cost object (cost center), quantity of service to be provided already & save the document. No FI document created after creating/maintaining the Service Entry Sheet but once you release the Service Entry Sheet, then only FI document created.
Now you can do MIRO with respect to Service Entry Sheet which already recognized and accepted.
Finally you can do payment to service vendor in F-53.
NOTE:
You can create u201CNu201D numbers of Service Entry Sheet (SES) with respect to Service order, till the all quantity received.
You can create MIRO w.r.t Service Entry Sheet and pay to vendor based on part service completed.
For more check the link:
How to make GL account field in SES to be made in display only
Regards,
Biju K

Problem in the contract - price of service master is notcpying to condition

Dear Experts,
I am facing a problem with the contract. I have created a contract for services. I have entered all the details like, validity period Service master numbers, Qty and price for each service master.
When I am using this contract in the maintenance order the price is not getting copied. I have analyzed the same and found that there is pricing condition created for the service master line item by the system automatically and this helps copying the price from contract to maintenance order.
This is happening to only one particular Pur. Org. For all other Pur. Org its not happening.
Can some one tell me what could be the reason for not creating the pricing condition for the contracts created for only a particular Pur. Org? Is there any configuration setting missing?
Please help me.
Thanks and Regards,
Praveen

Hello experts,
Can some one please through light on this please?
Thanks and Regards,
Praveen

Service Master Prices and Vendors not replicated

Hi All,
We have SRM4.0 and a strange problem wherein we are not able to get the prices per vendor maintained in the Service Master in R/3 replicated in SRM although the Service No, Description,Long Text,UOM,Product category details are getting replicated properly.
Service Masters in R/3 are maintained in AC02,AC03 transactions and the prices and vendors for service masters in ML35,ML39 etc. After replicating the service master initial load object SERVICE_MASTER in R3AS transaction in SRM only the basic details gets replicated and the info records like the vendor and prices for the services. Is there any specific setting needs to be done for maintaining the same as we have the condition types aligned with R/3 and IPC is up and running as well.
Do let me know incase someone can shed some light on the same.
Thanks in Advance.
Regards
Anirban

Hi Harshal,
we had similar issue in past.The problem for us was Creation date .We were trying to create a contract with past date. For this there is a setting in ECC which Depending upon the date.(You might have referred already,Any way bringing here to notice ).
As the customizing has been set with a valid from date.Everything before that will be created with a PA segment assignment (first line). So if possible, put the date in present.
Regards
Logu

Unit Conversion in Service master

It seems the in service master (AC01) there could be only one unit conversion. Can we have more than one unit conversion just like material master. If yes how to do that?

Hi ,
Unit of conversion is Default settings(in img activity at Pur org or client level) while creating Service PO UOM is always in AU.
regards,
Patil

Contracts - Service master price update

Hi All,
There was requirement in which the contract service master prices were required to be changed.
To update new condition price in the condition records, we created a program to update these values using ML52.
Eg. Contract A - item 10- Service S - old price - 100 - Valid till yesterday
                                         new price - 200 valid from today
We have a few problems here
1) Contract A always show old price even though valid price for this service today is 200 for the service S.
Is there any standard program which will correct this contract and get the new price seen in the contract based on the valid date. I.e. the service prices in the contract should always reflect the valid condition record price from ML52.
2) While updating ML52 there were two kinds of records. One with Plant specific and others without plant. Now when I go to contract, select services and select a service line item and click on the new condition record which is valid today and come back. If the condition record is plant specific, the new price 200 is immidiately seen on the contract service master screen. But if the ML52 value was not plant specific, it always shows me 100. What could be the reason for this.
I have tried to give as much details as I can. Let me know incase any more information is required.
Regards,
Shahu

Hi,
Certain condition types can be changed via mass maintenance (transaction MEDL) in a contract, the conditions in all
selected documents are correctly changed. However, even if you display
one of those contracts, the values on item level are NOT updated at all!
This only happens when a MANUAL start of the price determination
occurs, it is NOT performed automatically!
Nevertheless, the user can be SURE that correct príces are found by the system whenever such a contract service is selected, no matter what is written in that contract
itself!
If prices are entered into a contract with different validity periods,
the system does not update them automatically, but one has to use the pulldown menu option
'prices -> find new' after having selected one item line and switched
to the service fullscreen. If you want to update the service
contract with latest price then you have to use the following:
Me32K->item services->service conditions here goto menu
service specipications -> prices-> find New. Then system updates the
price with the current validy date price. In already existing contracts you must carry out a new pricing manually.
Please test additionally the batch input process for price updation in contracts - transaction SHDB.
I can not answer your question regarding the update of non plant specific data. Sorry.
Regards,
Edit

Service Master Price

Dear All,
We have created a service master reocrd in AC03, and have maintained the price in ML39. While creating a PR/PO under project the price is not picking. How can i get the price either in PR/PO ?
regds,
CB

Hi,
See
ML33 - Add ---For Vendor with Plant
ML39 - Add --For Vendor Without Plant
ML45 - Add ---For Service
First Think For what you maintaining the prices and then go ahead
Regards,
Ninad Kshirsagar

Alternate unit of measure for service master

Dear all
I have same service but different unit of measure like hr, day, month, pls explain how make alternative unit of measure in service master?

Hello,
I am afraid I must confirm that the system is working in this way...
It is not possible to define an alternative unit of measure in the service master in R/3.
If you want to create a purchase order with another unit of measure, you have to create a seperate service master with this unit of measure.
Thanx & Sorry
Mauro

Service entry sheet pick price from Scales based contract

Dear SAP Team,
We are doing the service entry sheet using Transaction Ml81N & facing the pricing issue.
Before doing the service entry sheet a SAP contact which has prices based on the scales as distance is created .We pay the vendor based on the depth where the drilling operation are performed.
Purchase order is created using as limit order as at the time of PO the exact depth & time consumed for the service is not clear.
While creating a Service entry sheet against the PO, when I click on the pushbutton u2018Service selectionu2019 the system prompts me to choose the Service from different sources.
I select the option of service to be selected from the purchasing document (which is my contract number with scale pricing).
After this step, I could see my contract service as below but I do not have the option to select the scale prices based on the depth where the services are performed.
I do not know when SAP has provided the scale pricing in contract & it allows you to select the contract during the service entry sheet then but it does not allow you to select the prices maintained in the contract for the scales. I would highly appreciate any solution provided on it or any other alternative possible.

Hi,
You have two options, just check for to carry out....
OPTION--1:
You can create three service master/activity number namely Pumping depth 0-500 M , Pumping depth 501 -1000 M & Pumping depth 1001-Above and keep base unit of measure for service master/activity number is Hour.
Now create value or quantity contract as per your requirement with three service master/activity number & you can maintain
the cost per unit as Pumping depth 0-500 M is 400$/ Hr , Pumping depth 501 -1000 M is 500$/ Hr, Pumping depth 1001-Above is 600$/ Hr
Then you can create Release Order/Purchase Order WRT contract.
Now during SES creation in ML81N, you can select which activity number performed and accordingly the cost and service number copied to SES & you can save SES and release SES.
OPTION--2:
You can have source list(ME01) & Info record (ME11). In the info record , you can maintain all scales as your requirement
and then create contract & then release order and finally SES.
Regards,
Biju K

"Expense" of service master

Hi Experts,
I need the expert advice...!!
I have just registered a new service. But, I don't know the meaning of the check box "Expense"....
Could you tell me the meaning of "Expense" in service master?
And, does it use in any case? If possible, please tell me an actual example?
Warm Regards,
Ryota Ichida

Hi Ryota,
Let me explain the difference in the context of a Professional Service Provider (PSP) using ByD.
PSPs sell services (say "Senior Consultancy", e.g.) to their customers via sales order items.
These services are set up in the Work Center "Product and Service Portfolio" (without the "expense" indicator being set).
Usually the "process controls" "Purchasing", "Sales", and "Valuation" are active.
In addition, sales prices and service cost rates are defined for those services.
In order to render their services the consultants also need to travel. Such Expenses usually need to be charged to the PSP's customer
Travel is either some uplift contained in the services sold, then the PSP is done and does not have to care about "expenses".
If however, the PSP charges travel explicitly to their customers, then they need expenses that are set up in the Work Center "Product and Service Portfolio" as services with the expense indicator being checked.
They would, for example, create an expense "Travel" with base-unit "each" and include it as one item (item type "Expense - Time and Material (Project)") in the sales order. Then, later on, they can use this expense for invoicing expenses of an expense report or a supplier invoice to their customers.
Best regards
Otfried

Creation of Service Master Record (Furniture and Fixture Maintenance)

Hi,
I want to create a Service Master for "Furniture and Fixture Maintenance".
What should I keep in mind while creating a Service Master Record.
Would like to know the about the following fields which seems to be useful:
Activity Number:
Base Unit of Measure:
Material Service Group:
Division:
Valuation Class
Service Type
Is there any other fields which I should keep in mind.
Regards,

Thanks Murgun for the reply.
Sorry for late response from my side.
1. What is use of Service Category. Do we need to use the default or we need to configure as per our requirement.
2. while creating Service Order, we need to enter Single Short Text in Item & Multiple Short Texts in Item Details. What is the actual use of providing Multiple Short Texts in Item Details.
3. Can we use the Service Master in both in Item Short Text & Item Details Short Texts.
Regards,

Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.

html,body{padding:0;margin:0;font-family:Verdana,Geneva,sans-serif;background:#fff;}html{font-size:100%}body{font-size:.75em;line-height:1.5;padding-top:1px;margin-top:-1px;}h1{font-size:2em;margin:.67em 0}h2{font-size:1.5em}h3{font-size:1.16em}h4{font-size:1em}h5{font-size:.83em}h6{font-size:.7em}p{margin:0
0 1em;padding:0 .2em}.t-marker{display:none;}.t-paste-container{;left:-10000px;width:1px;height:1px;overflow:hidden}ul,ol{padding-left:2.5em}a{color:#00a}code, pre{font-size:1.23em}
I get this message on two different machines installing SQL2014 developer edition, a Windows 7 and a Windows 8 machine. Both machines have SQL2005 through SQL2012 developer machines installed and working great. I have tried uninstalling all SQL2014 stuff and
installing again making sure I was running as an Administrator to no avail.
How do I look at sys.key_encryptionswhen the server will not start to finish installation?
The links in the log only provide the "We're Sorry" message.
This is the first error dialog info
TITLE: Microsoft SQL Server 2014 Setup
The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254026
The SQL Server error log has the message in the title.
2014-04-04 17:02:17.49 Server Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-04-04 17:02:17.49 Server UTC adjustment: -4:00
2014-04-04 17:02:17.49 Server (c) Microsoft Corporation.
2014-04-04 17:02:17.49 Server All rights reserved.
2014-04-04 17:02:17.49 Server Serverprocess ID is 9236.
2014-04-04 17:02:17.49 Server System Manufacturer: 'Hewlett-Packard', System Model: 'HP EliteBook8760w'.
2014-04-04 17:02:17.49 Server Authentication mode is MIXED.
2014-04-04 17:02:17.49 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Log\ERRORLOG'.
2014-04-04 17:02:17.49 Server The service account is 'NT Service\MSSQL$SQL2014'. This is an informational message; no user action is required.
2014-04-04 17:02:17.49 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\mastlog.ldf
2014-04-04 17:02:17.49 Server Command Line Startup Parameters:
-s "SQL2014"
-m "SqlSetup"
-Q
-q "SQL_Latin1_General_CP1_CI_AS"
-T 4022
-T 4010
-T 3659
-T 3610
-T 8015
2014-04-04 17:02:17.79 Server SQL Server detected 1 sockets with 4 cores per socket and 8 logical processors per socket, 8 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2014-04-04 17:02:17.79 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-04-04 17:02:17.79 Server Detected 8142 MB of RAM. This is an informational message; no user action is required.
2014-04-04 17:02:17.80 Server Using conventional memory in the memory manager.
2014-04-04 17:02:17.92 Server Default collation: SQL_Latin1_General_CP1_CI_AS (us_english1033)
2014-04-04 17:02:17.95 Server Perfmoncounters for resource governor pools and groups failed to initialize and are disabled.
2014-04-04 17:02:17.96 Server Query Store settings initialized with enabled = 1,
2014-04-04 17:02:17.97 Server The maximum number of dedicated administrator connections for this instance is '1'
2014-04-04 17:02:17.97 Server This instance of SQL Server last reported using a process ID of 8760 at 4/4/2014 5:02:08 PM (local) 4/4/2014 9:02:08 PM (UTC). This is an informational message only; no user action is required.
2014-04-04 17:02:17.97 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-04-04 17:02:17.97 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-04-04 17:02:18.00 Server Database Mirroring Transport is disabled in the endpoint configuration.
2014-04-04 17:02:18.00 spid7s Warning ******************
2014-04-04 17:02:18.00 spid7s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-04-04 17:02:18.01 spid7s Starting up database 'master'.
2014-04-04 17:02:18.02 Server Software Usage Metrics is disabled.
2014-04-04 17:02:18.07 Server CLR version v4.0.30319 loaded.
2014-04-04 17:02:18.11 spid7s 8 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2014-04-04 17:02:18.24 spid7s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2014-04-04 17:02:18.25 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2014-04-04 17:02:18.26 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2014-04-04 17:02:18.34 spid7s Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.
2014-04-04 17:02:18.40 spid7s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2014-04-04 17:02:18.40 spid7s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2014-04-04 17:02:18.44 spid7s SQL Trace ID 1 was started by login "sa".
2014-04-04 17:02:18.44 spid7s Server name is 'TOMGROSZKO-HP\SQL2014'. This is an informational message only. No user action is required.
2014-04-04 17:02:18.46 spid16s Error: 17190, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s Initializing the FallBackcertificate failed with error code: 1, state: 20, error number: 0.
2014-04-04 17:02:18.46 spid16s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-04-04 17:02:18.46 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s TDSSNIClientinitialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-04-04 17:02:18.46 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s TDSSNIClientinitialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-04-04 17:02:18.46 spid16s Error: 17826, Severity: 18, State: 3.
2014-04-04 17:02:18.46 spid16s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-04-04 17:02:18.46 spid16s Error: 17120, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s SQL Server could not spawn FRunCommunicationsManagerthread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
And a copy of the install log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-04-04 16:23:39
End time: 2014-04-04 17:06:25
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: TOMGROSZKO-HP
Machine processor count: 8
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2005 SQL2005 MSSQL.1 Database Engine Services
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 SQL Server Replication
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 Full-Text and Semantic Extractions for Search 1033
Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 SharedTools
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.2 Analysis Services
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.3 Reporting Services - Native
1033 Developer Edition (64-bit) 9.00.1399.06 No Yes
SQL Server 2005 DTS
1033 Developer Edition (64-bit) 9.4.5069 No
Yes
SQL Server 2005 Tools
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsClient
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsClient\Connectivity
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument\BOL
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument\Samples
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 NS
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 Database Engine Services 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 SQL Server Replication 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 Full-Text and Semantic Extractions for Search 1033 Developer
Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSAS10_50.SQL2008R2 Analysis Services 1033
Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSRS10_50.SQL2008R2 Reporting Services - Native 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 Management Tools - Basic
1033 Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 Management Tools - Complete
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools Connectivity
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools Backwards Compatibility
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools SDK
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Integration Services
1033 Developer Edition 10.51.2550.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Database Engine Services 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 SQL Server Replication 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Full-Text and Semantic Extractions for Search 1033
Developer Edition 11.1.3000.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Data Quality Services 1033
Developer Edition 11.1.3000.0 No Yes
SQL Server 2012 SQL2012 MSAS11.SQL2012 Analysis Services
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSRS11.SQL2012 Reporting Services - Native 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Management Tools - Basic
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Management Tools - Complete
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools SDK
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 BIDS
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL Server Data Tools - Business
Intelligence for Visual Studio 2012 1033 11.1.3402.0 No Yes
SQL Server 2012 Integration Services
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 LocalDB
1033 Express Edition 11.1.3128.0 No Yes
SQL Server 2012 Master Data Services
1033 Developer Edition 11.1.3000.0 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Downloads\SQL2014\SQL\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SQL2014
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\SQLData\MSSQL\SQL2014\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.SQL2014\OLAP\Config
ASDATADIR: C:\SQLData\MSSQL\SQL2014\OLAP
ASLOGDIR: C:\SQLData\MSSQL\SQL2014\OLAP
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSOLAP$SQL2014
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: TomGroszko-HP\Tom Groszko
ASTEMPDIR: C:\SQLData\MSSQL\SQL2014\OLAP
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, MDS
FILESTREAMLEVEL: 3
FILESTREAMSHARENAME: SQL2014
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQL2014
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQL2014
INSTANCENAME: SQL2014
ISSVCACCOUNT: NT Service\MsDtsServer120
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer$SQL2014
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: C:\SQLData\MSSQL\SQL2014\Backup
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQL2014
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: TomGroszko-HP\Tom Groszko
SQLTEMPDBDIR: C:\SQLData\MSSQL\SQL2014\Engine
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: C:\SQLData\MSSQL\SQL2014\Engine
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: Documentation Components
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\SystemConfigurationCheck_Report.htm
Any suggestions for what step to take next will be appreciated.
Thanks
Tom G.

Hi Tom,
Sorry for the delay. We can exclude the media factor since you were able to install it on VM with this media.
If I understand correctly, Shanky said “Abve message can also appear due to corrupt profile so deleteting old profile and creating new one and using this to install would also help.Make sure you always RK on setup.exe and select run as administrator” which
means your user account may be corrupted rather than the Virtual account. You can create a new Windows user account and use it to log into the system. Then, re-try the installation.
Additional information:
http://windows.microsoft.com/en-us/windows/create-user-account#create-user-account=windows-8
Thanks.
Tracy Cai
TechNet Community Support

Creating Service Entry Sheet without using Service Master/Service lines

We are invoking the BAPI_EntrySheet_Create to create the service entry sheet. We are currently facing this issue...
1) For assigned PO's, we are getting the PO item and Account assignment information from BAPI_PO_GetDetail. We are using these values to populate the parameters/tables to invoke BAPI_EntrySheet_Create. For population the Entrysheetservices table, we are not using information from Service Master/Service lines but use the information we get from an external system to populate the Service lines(ESLL). We do not provide a Package No/Service information when invoking the BAPI but populate the service lines with short text, quantity, Gross price etc without service information like package no, outline indicator etc. The BAPI creates a service enty sheet successfully(this is without the SES Acceptance indicator not being set) but when we lookup the SES# from ML81n transaction the ESLL details lines are not displayed.
When displaying the SES using transaction ML81N, the header information is displayed correctly but the lines are not displayed. The Header information is correctly populated in ESSR table and detail is also populated in ESLL table. I think the cross reference information is correctly set in ESLH table to pull up the detail when ML81N as it is missing the package/sub pack information.
Your expert advise in resolving this issue is very much appreciate. Please advise.

Hi,
Creating Service entry sheet using bapi BAPI_ENTRYSHEET_CREATE
For creating service entry sheet follow below link and it helps to you.
http://wiki.sdn.sap.com/wiki/display/ABAP/CreatingServiceEntrySheetusing+BAPI
Regards,
Sekhar

Service Master unit wise price

Similar Messages

Maybe you are looking for