Service missing after server re-start

Hi
I'm getting a weird behaviour of J2EE Engine. I've deployed a webservice on server. The problem starts when someone re-starts the server. The service, that was previously deployed, was not found on server, i.e. I've to re-deployed that service.
I hope u understood my problem. Please Help
Abhinav Sharma

Hi
There is nothing trouble for webservices when the server is restarted.
can you please explain in detail
Kind Regards
Mukesh

Similar Messages

Time and Classifieds services missing after installing LabVIEW 8.0

Hi,
After installing LabVIEW 8.0 I noticed the Lookout Time and Classifieds services are missing. At first I thought it was just the Lookout lighthouse in the system tray which had disappeared but when checking in services.msc I can see that the services themselves are no longer there. The Citadel server is, however.
I am using Lookout Direct so please let me know if this question is more appropriate on the Automation Direct forums. I'm trying to change to a NI solution instead but every step is taking me considerable time.
Thanks,
Dave

Try to repair Lookout Direct from Windows Add/Remove Programs. The missing services should be reinstalled after repair.
Ryan Shi
National Instruments

Print Services inactive after server reboot

Hi,
after each server (10.4.7) reboot, the Print Services remain inactive. I have to stop/start the Print Services using Server Admin to resume normal operations.
Is this a bug or a feature?
Regards,
Andre
Mac Mini PPC, 1,25 GHZ Mac OS X (10.4.7)

I have the exact same issue. With the help of another discussion thread, I discovered the following:
1) After restarting the server, if you use Network Utility to port scan your server, you'll probably find that port 515 ("LPR Printing") is blocked. This was true for me even when I turned the Firewall service off altogether.
2) After stopping and restarting the Print Service in Server Admin, if you port scan your server again, you'll find that port 515 is now open.
Strange...
-- Steve

CUCM network services missing after restore

Hi
I have a cucm 8.0.3 appliance, i'm migrating to vmware but when i restore the backup in the vmware i lost like 20 services (network services), how can i fix it?
Thanks

Hi Alejandro,
It sure sounds like this bug;
CSCtl82213 Bug Details
Bug #4 of 6 | < Previous | Next >
CUCM Serviceability Network Services page missing services on VMware
Symptom:
Under the CUCM Serviceability webpage, Control Center - Network Services, some
or all services are not displayed so they cannot be started, stopped, or restarted.
Conditions:
CUCM 8.x running on a VMware server.
Workaround:
The workaround for this defect requires TAC to access your server with a remote
support account. Open a TAC SR and reference this defect to get it fixed.
Status
Fixed
Severity
3 - moderate
Last Modified
In Last 2 weeks
Product
Cisco Unified Communications Manager (CallManager)
Technology
1st Found-In
8.0
8.5(1)
8.5(1.10000.13)
Fixed-In
8.6(0.98000.19)
8.6(0.98000.56)
8.6(0.99981.2)
8.6(1.10000.1)
8.6(1.96000.51)
8.6(1.96000.1)
8.6(0.95230.2)
8.6(1.10000.43)
8.5(1.12024.1)
1.0(0.98000.42)
8.6(1.95040.1)
8.6(1.10001.1)
8.6(1.95190.40)
8.6(1.97011.1)
8.6(1.97011.2)
8.6(1.99989.1)
9.0(0.95010.1)
8.6(0.95180.9)
8.6(1.99986.1)
8.5(1.12900.6)
8.6(1.95020.1)
8.6(1.95020.58)
Cheers!
Rob
"Talk about a dream
Try to make it real"
- Springsteen

Media missing after server migrate

Greeting All,
I just help my friend migrate their server to another Mac. After migrate media and FCP project file. We found there are media missing via AFP sharing.
This was working fine in old server. We try SMB everything look fine but with terrible performance. Is there any we need fix in server end? Please advise.
Thanks,
Spin

The view from the command line in Terminal.app is the canonical source for the files on a system, so I'd confirm that the path matches your expectations — you can drag file or folder icons from the Finder window directly into Terminal to get the path visible — enter a # to prevent accidental execution, then drag the file or folder icon right to the input line in Terminal — and confirm you're where you think you are.
Check that your date and time and your time zone are set correctly on all systems.
Per Apple, do not log directly into the server console with a network account.

Published service missing after restore

After having to restore all software & data after a hard drive failure on my iMac, Lightroom 5 appears ok but has lost published services that I had set up. These were smart such as pictures added in the last two months. Thinking I would have to set them up again I was surprised to find that when trying to add "Last2Months" it was rejected as it already existed. I can't see this in lightroom. Does anyone know where lightroom stores published services properties?

Hi
There is nothing trouble for webservices when the server is restarted.
can you please explain in detail
Kind Regards
Mukesh

Services on Virtual Server wont start

Hi Team,
We have a few services that have stopped but it is not showing on spiceworks dashboard. Please find attached a photo from server manager logs. Can you please assist?
Liam
This topic first appeared in the Spiceworks Community

https://wiki.sdn.sap.com/wiki/display/BOBJ/Results
Compare "DI Labs 1" with "DI Labs 4 VMWare".
As you see, everything has a little bit of an impact, having a virtual network, memory access, CPU overhead. Not much but significant.
So for dev/test no problem at all, in fact we use that inhouse at SAP a lot ourselves. Our entire demo and training environments are using virtual machines. For a prod system I would evaluate if the advantages are big enough compared to the lower throughput.
And actually, I prefer to install the jobserver on the same machine as the target database is located at anyhow.

Users missing after server restart

Hello,
I have had 2 servers in the past week loose all the user accounts after a server restart. In both cases I had to restore from backup. Anyone else have this happen to them?
Thanks!

Hi Henrique,
How are you restarting your server?
The roles and users are present in the data\ldap folder on your server folder, by any chance are they getting deleted?
-Faisal
http://www.weblogic-wonders.com

Consequences of password expiration AFTER server is started

Hi,
What happens when the LDAP server expires the password for the account specified
in boot.properties?
What are all the activities for which the WebLogic Server keeps checking the validity
of this userid/pwd? For example, Windows checks for your authorization pretty
much for every time you access a resource like a file, etc.
Any pointers to documentation is greatly appreciated. I am curious to know what
exactly happens behind the scenes when the password expires AFTER the server is
up and running.
Thanks,
Anant

On 4 Feb 2004 09:49:20 -0800, Anant Kadiyala <[email protected]> wrote:
>
Hi,
What happens when the LDAP server expires the password for the account
specified
in boot.properties?
What are all the activities for which the WebLogic Server keeps checking
the validity
of this userid/pwd? For example, Windows checks for your authorization
pretty
much for every time you access a resource like a file, etc.
Any pointers to documentation is greatly appreciated. I am curious to
know what
exactly happens behind the scenes when the password expires AFTER the
server is
up and running.
Thanks,
Anant
My guess is that the next time an authentication is required that the
expired password will fail. I don't know of any comprehensive list that
details everytime an authentication is undertaken.

NPS Management tools missing after server 2012 r2 upgrade

it appears that my nps management tools are gone! I've verified that Network Policy and Access Services is installed and running. but i'm not able to manage it. I can not find the console anywhere, it's not in the admin tools and I cannot at
it through mmc. I just noticed this since ip upgrade to 2012 r2, since it is already configured can I just add the management tools?
thanks

Hi，
Good to hear that and thanks for your feedback.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Pending message redelivery wait period after server startup

Hi, I have seen an strange behaviour in the way pending JMS messages are
          redelivered to MDBs at server startup.
          In my unit test I have seen that, killing Weblogic during an MDB code
          execution as expected makes the container to redelivery unconfirmed message
          at server startup. I have also seen that it's redelivered about 4 minutes
          after server is started (more info of this in thread: "Problem with
          persistent messages and MDBs" 25 October 2002)
          After a recent crash we have had on the system in wich there were a lot of
          messages pending to deliver to an MDB we saw that they were being
          redelivered just after the MDBs were deployed while system was starting. Of
          course due to the fact that some components needed by the MDB were not
          deployed by that time, a lot of exceptions were raised making messages to be
          queued again and promptly delivered wich caused more exceptions. Just a big
          mess!
          I'm tring to figure a good work-around about this, what I wanted to know is
          how is implemented the "delay" to send messages after server startup. Is it
          done by comparing timestamp of message (when did it enter the queue and
          thereby persisted on the store) with current system time?. That approach of
          course will fail if any of the messages were sent before that "delay" time.
          If this is the case and there isn't a fix for it this is what I have in
          mind:
          Each MDB will have a private attribute wich will be used to detect when
          system has completely started. By default it will be false and after a
          message is sent to the MDB the first line of the onMessage method will test
          wether system has started or not (by checking weblogic connection port i.e.
          7001. Btw. is there any better way of checking server has finished start-up)
          if not, a runtime exception will be launched that will force message to be
          redelivered (without trying to execute any MDB code), I think setting a
          proper redelivery delay i.e. 30-60 secs. will allow server to startup with
          less problems (in the situation I described above JVM crashed with an 11
          system signal)
          Any other ideas to deal with this?
          Thanks in advance.
          Regards.
          Ignacio.


Hi Ignacio,
          I think you can usually control the order in which ejb's are booted,
          through a combination of console settings and
          meta file entries. I suggest posting to the ejb newsgroup
          to find out how.
          The four minute delay you see is normal for resolving
          interrupted transactions, but I believe that an enhancement
          was put into a 7.0 SP to reduce or eliminate this interval,
          and that 8.1 has no interval. Post to the transaction
          newsgroup for more info, or contact customer support.
          Given that you referenced earlier posts on this issue, you
          probably already know how to tune the interval down to one
          minute even without the enhancements.
          There is no other delay for sending messages at system startup,
          as soon as the MDB is booted it attaches to JMS, and JMS
          starts delivering messages whose transactional state is known.
          Tom
          P.S. I suppose one way to detect end-of-boot is to
          place a startup class last in the boot order.
          P.P.S. For MDBs one alternative is to code a "sleep" in the onMessage if
          an unavailable resource is detected - this
          is hokey, but works as long as you have made sure that
          max-beans-in-free-pool totals do not come near or exceed
          available thread pool size.
          Ignacio G. Dupont wrote:
          > Hi, I have seen an strange behaviour in the way pending JMS messages are
          > redelivered to MDBs at server startup.
          >
          > In my unit test I have seen that, killing Weblogic during an MDB code
          > execution as expected makes the container to redelivery unconfirmed message
          > at server startup. I have also seen that it's redelivered about 4 minutes
          > after server is started (more info of this in thread: "Problem with
          > persistent messages and MDBs" 25 October 2002)
          >
          > After a recent crash we have had on the system in wich there were a lot of
          > messages pending to deliver to an MDB we saw that they were being
          > redelivered just after the MDBs were deployed while system was starting. Of
          > course due to the fact that some components needed by the MDB were not
          > deployed by that time, a lot of exceptions were raised making messages to be
          > queued again and promptly delivered wich caused more exceptions. Just a big
          > mess!
          >
          > I'm tring to figure a good work-around about this, what I wanted to know is
          > how is implemented the "delay" to send messages after server startup. Is it
          > done by comparing timestamp of message (when did it enter the queue and
          > thereby persisted on the store) with current system time?. That approach of
          > course will fail if any of the messages were sent before that "delay" time.
          >
          > If this is the case and there isn't a fix for it this is what I have in
          > mind:
          >
          > Each MDB will have a private attribute wich will be used to detect when
          > system has completely started. By default it will be false and after a
          > message is sent to the MDB the first line of the onMessage method will test
          > wether system has started or not (by checking weblogic connection port i.e.
          > 7001. Btw. is there any better way of checking server has finished start-up)
          > if not, a runtime exception will be launched that will force message to be
          > redelivered (without trying to execute any MDB code), I think setting a
          > proper redelivery delay i.e. 30-60 secs. will allow server to startup with
          > less problems (in the situation I described above JVM crashed with an 11
          > system signal)
          >
          > Any other ideas to deal with this?
          >
          > Thanks in advance.
          >
          > Regards.
          >
          > Ignacio.
          >
          >

This message always appears: [JavaScript Application] "Error: missing } after function body" Please, i need help with this.

A window appears with this message : [JavaScript Applicaction] Error: missing } after function body.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Executing 2nd command after server rebooted & related services started

hi friends
i am creating a PS script containg two lines:
the first line executes dcpromo /unattend:c:\answerfile.txt to create a new domain controller
the second line will disable domain password complexity which is:
set-executionPolicy -identity mydomain.lab -complexityenabled $false -minimumpasslength 5
the problem is i need after first line of the script, executed, server be rebooted & the 2nd line
be executed after server rebooted & whey AD services started, this script continue to run the next line.
is it ossible in powershell?
thanks in advanced

You won't be able to do that in the same script.
You can use a second script that waits for the AD services to start, and then sets the password policies and run that script after the restart using the RunServicesOnce key:
https://support.microsoft.com/kb/179365?wa=wsignin1.0
Use the first script to set that key and then do the restart after the DC promo is finished.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "
hi again. thanks
in addition i found that the powershell workflow is better way to that
regards

After i installed updates for my mac mini server, the web services for the server app wont start, it gives an error massage: "Error Reading Settings"

After i installed updates for my mac mini server, the web services for the server app wont start, it gives an error massage: "Error Reading Settings"
The system logs reads:
Mar 29 22:06:25 server servermgrd[82]: servermgr_web: Error Domain=XSServerFoundationErrorDomain Code=4 "Failed to read settings: Exception:
          undefined method `downcase' for nil:NilClass
          ." UserInfo=0x7fc547901080 {NSLocalizedDescription=Failed to read settings: Exception:
          undefined method `downcase' for nil:NilClass

To check the local network for some of the common configuration problems, launch Terminal.app and issue the following diagnostic command:
sudo changeip -checkhostname
That'll report some local configuration information and then either no errors detected and no changes required, or it'll point to whatever configuration errors or issues it might detect. That doesn't catch everything, but it catches the common errors.
FWIW, 192.168.0.0/24 and 192.168.1.0/24 are poor choices for the local network, as VPNs are based on IP routing and IP routing gets tangled when the same subnet is used on both ends of the VPN. 192.168.0.0/24 and 192.168.1.0/24 are near ubiquitous in home networks and coffee shops.

Could not retrieve the in-memory service URL after starting the in-memory.

A local jvm process is discovered but mission control will not connect.
Both jvm process and mission control are on the same host.
Any suggestion?
Thanks.
This is the mission control help version:
Oracle® JRockit Mission Control 3.1.0 (R27.6.3-40_o, 112101)
I'm running mission control and a jboss web server on jrockit:
$ java -version
java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
BEA JRockit(R) (build R27.6.3-40_o-112056-1.6.0_11-20090318-2103-linux-x86_64, compiled mode)
On linux:
$ uname -a
Linux isidore 2.6.27-11-generic #1 SMP Wed Apr 1 20:53:41 UTC 2009 x86_64 GNU/Linux
This is the message that appears in the controlling tty window:
Apr 24, 2009 9:55:43 PM com.jrockit.mc.browser.attach.LocalConnectionDescriptor tryJRCMDStyleStartingOfTheAgent
SEVERE: Could not retrieve the in-memory service URL after starting the in-memory agent!
Apr 24, 2009 9:55:43 PM com.jrockit.mc.browser.attach.LocalConnectionDescriptor tryJRCMDStyleStartingOfTheAgent
Here is the exception in the dialog details:
Could not open Management Console for [1.6] JBoss (5,474).
java.lang.NullPointerException: null
java.lang.NullPointerException
     at com.jrockit.mc.rjmx.ConnectionDescriptorToolkit.getHostName(ConnectionDescriptorToolkit.java:152)
     at com.jrockit.mc.rjmx.internal.RJMXConnection.setupServer(RJMXConnection.java:521)
     at com.jrockit.mc.rjmx.internal.RJMXConnection.connect(RJMXConnection.java:144)
     at com.jrockit.mc.rjmx.internal.RJMXConnectorModel.establishConnection(RJMXConnectorModel.java:111)
     at com.jrockit.mc.rjmx.internal.RJMXConnectorModel.connect(RJMXConnectorModel.java:154)
     at com.jrockit.mc.rjmx.ConnectionManager.innerConnect(ConnectionManager.java:95)
     at com.jrockit.mc.rjmx.ConnectionManager.connect(ConnectionManager.java:61)
     at com.jrockit.mc.console.ui.actions.StartConsole$1.preConnect(StartConsole.java:38)
     at com.jrockit.mc.browser.utils.PreConnectJob.run(PreConnectJob.java:74)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)

After I posed the above, I saw that the url on the exception is munged.
I didn't stumble over how to manually override that url.
Instead, I added remote jmx capability to the process and added a connector. That is my work around.
Thanks,
John

Service missing after server re-start

Similar Messages

Maybe you are looking for