Service 'MSExchangeTransport' failed to start
Good morning all,
I am trying to install exchange 2010 on a Windows 2008 R2 sp1 server. We have an existing exchange 2003 instance on our old server, a windows 2003 sp2 SBS server. We had an awful lot of DNS problems and active directory troubles when getting
this server installed (its a domain controller) but everything seems to be ok. However, whenever I try to install exchange I get the following error:
"Service 'MSExchangeTransport' failed to start. Check the event log for possible reasons for the service start failure"
I've ensured that IPv6 is enabled, I've checked that the .net port sharing service is started and I've tried changing the service to run as a local user with access to the desktop, I'm still getting the same error.
Any ideas?
Thanks.
Hi
Do you see any event error ?
You can open ExchangeSetup.log and find out the reason.
I just search same cases.
The cause of the problem is that the msExchServerSite attribute on the server object does not get updated automatically and the Microsoft Exchange Service Fails to start.
open adsiedit
a. Browsed to location: CN=USA,CN=Sites,CN=Configuration,DC=exchange,DC=local
b. Copied the distinguishedName value of the site and pasted it in a notepad.
c. Again browsed to location: CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Exchange,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=exchange,DC=local
d. Kept refreshing this location until my Exchange 2010 HT server name papered there. The moment it appeared I did the below steps real quick.
e. Opened Properties and located attribute:
msExchServerSite
f. Double clicked on the attribute and pasted the value that I copied from site distinguishedName.
Similar Messages
-
Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start
Hi,
I've been trying for weeks now to try to get Office Professional Plus 2013 to install on Windows 8 Pro. My system has been running perfectly otherwise.
When I try to install Office 2013, I get the following message (excerpt from log file):
2012/11/27 22:26:30:885::[4576] MSI(ACTIONSTART): 'Action 22:26:30: StartServices. Starting services'
2012/11/27 22:27:00:949::[4576] MSI(ERROR): 'Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start. Verify that you have sufficient privileges to start system services.'
2012/11/27 22:27:00:949::[4576] Log level changed from: Standard to: Verbose
2012/11/27 22:27:00:949::[4576] Showing message Title: 'Setup', Message: 'Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start. Verify that you have sufficient privileges to start system services.'
2012/11/27 22:27:05:964::[4576] Message returned: 4
2012/11/27 22:27:05:964::[4576] WER is not considering last MSI error event
2012/11/27 22:27:39:105::[4576] MSI(ERROR): 'Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start. Verify that you have sufficient privileges to start system services.'
2012/11/27 22:27:39:105::[4576] Showing message Title: 'Setup', Message: 'Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start. Verify that you have sufficient privileges to start system services.'
2012/11/27 22:30:59:948::[4576] Message returned: 2
2012/11/27 22:30:59:948::[4576] WER element [P5] is set to value [Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start. Verify that you have sufficient privileges to start system services.]
2012/11/27 22:30:59:948::[4576] WER element [P5] is converted to [1920]
2012/11/27 22:30:59:948::[4576] WER element [P7] is set to value [0x780]
I have tried everything I can think of, and everything on every thread I've found on related topics. No luck. If I try to start the service myself via services.msc I get the following message:
The Windows Font Cache Service service on Local Computer started and then stopped. Some Services stop automatically if they are not in use by other services or programs. Any assistance anyone can provide would be greatly appreciated!Hi micrey! It works!
1. Type “services.msc” into the Start Search
bar and hit Enter.
2. Find the Windows Font Cache Service, select
it and hit “Stop”.
3. Open Windows Explorer and navigate to “C:\Windows\ServiceProfiles\LocalService\AppData\Local”
requires admin privileges
4. Delete the FontCache dat files. (They will
be regenerated over time.)
5. Restart the Windows Font Cache Service.
Thank you! -
Downloading iTunes get air message will box says iTunes service iPod service (ipod service )failed to start verify that you have sufficient privilege to start system.
At the bottom three boxes abort, retry, ignore. When I try to sync my iPod will not work to get an error message againI found the answer to my question here: https://discussions.apple.com/thread/5572755?tstart=0
-
Scheduled Task as Service Account - Failed to Start 2147943785
I am attempting to run some powershell scripts that update membership of groups based on role attribute on users, then also grabs members of some groups and updates other groups with these members.
I've delegated access through "security" to give this service account write:member and write:memberof for the Groups OU and write:memberof for the OUs containing the user accounts.
I've updated my Default Domain Policy to give this service account Log On As Batch Job permissions.
The scheduled task is running from a Domain Controller.
When I attempt to run the task as the service account I receive the following:
Task Scheduler failed to start "\SITE Role Membership" task for user "DOMAIN\GroupScripts$". Additional Data: Error Value: 2147943785.
What am I missing here?Hi Allister,
Please follow these steps t troubleshoot:
Type "gpedit.msc", try to configure the following policy:
[Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment]
1. Log on as a batch job.
2. Allow log on locally.
Add the service sccount domain\username to these two policies.
Refer to:
Task Scheduler failed to start - Additional
Data: Error Value: 2147943785
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang -
ProcessManager service owner - failed to start
Hi,
I am running 9.0.4.1 on windows. I would like to change the owner of the ProcessManager service from LocalSystem to the user, who installed the AS. When I do it and I try to start opmn
cmd>opmnctl start
I am getting:
pingwait exits with 1220396
opmnctl: opmn start failed
Can somebody point me to right direction, what has to be done to make it working?
Thanks,
MarekHi
Do you see any event error ?
You can open ExchangeSetup.log and find out the reason.
I just search same cases.
The cause of the problem is that the msExchServerSite attribute on the server object does not get updated automatically and the Microsoft Exchange Service Fails to start.
open adsiedit
a. Browsed to location: CN=USA,CN=Sites,CN=Configuration,DC=exchange,DC=local
b. Copied the distinguishedName value of the site and pasted it in a notepad.
c. Again browsed to location: CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Exchange,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=exchange,DC=local
d. Kept refreshing this location until my Exchange 2010 HT server name papered there. The moment it appeared I did the below steps real quick.
e. Opened Properties and located attribute:
msExchServerSite
f. Double clicked on the attribute and pasted the value that I copied from site distinguishedName. -
Start-CsWindowsService : Service RTCATS failed to start within the expected
Good morning gentleman.
Any help will be very appreciated.
I have a new Lync 2013 Enterprise deployment and I had an error with the RTCATS service as below:
└ ▼ RTCATS
12/03/2014 12:25:22
Failed
└
Service start requested "Lync Server Audio Test Service (RTCATS)".
12/03/2014 12:25:22
└
Waiting for service operation to complete.
12/03/2014 12:25:22
└
ServiceStartFailed: Failed to start service within the expected timeframe.
12/03/2014 12:27:24
Error
└
Error: System error.
▼ Details
└ Type: TimeoutException
└ ▼ Stack Trace
└
at Microsoft.Rtc.Management.Deployment.Core.NTService.Start(Boolean wait)
I already checked the database and it´s ok. Cheking the topology publishment i can see that´s installed as below:
Application: testbot 12/03/2014 13:16:32
└ Created trusted service entry for type=Microsoft.Rtc.Applications.TestBot, port=5076, routable=True, gruuId=3e73c1c2-367b-5e45-8eeb-afebfa256a61 and FQDN=pool.domain.local.
12/03/2014 13:16:32
└ Contacts already exist for the application. 12/03/2014 13:16:32
And with the Test-cscomputer:
Application "testbot" is ready on
Databases are ok:
DatabaseName : rtcab
StateOnPrimary : Principal
StateOnMirror : Mirror
MirroringStatusOnPrimary : synchronized
MirroringStatusOnMirror : synchronized
DatabaseName : rtcxds
StateOnPrimary : Principal
StateOnMirror : Mirror
MirroringStatusOnPrimary : synchronized
MirroringStatusOnMirror : synchronized
DatabaseName : rtcshared
StateOnPrimary : Principal
StateOnMirror : Mirror
MirroringStatusOnPrimary : synchronized
MirroringStatusOnMirror : synchronized
DatabaseName : rgsconfig
StateOnPrimary : Principal
StateOnMirror : Mirror
MirroringStatusOnPrimary : synchronized
MirroringStatusOnMirror : synchronized
DatabaseName : rgsdyn
StateOnPrimary : Principal
StateOnMirror : Mirror
MirroringStatusOnPrimary : synchronized
MirroringStatusOnMirror : synchronized
DatabaseName : cpsdyn
StateOnPrimary : Principal
StateOnMirror : Mirror
MirroringStatusOnPrimary : synchronized
MirroringStatusOnMirror : synchronized
And already checked the get-csaudioTestServiceApplication and ADSI.edit the sip domain are ok
Could you please help me?
Thank you in advance.Hi,
Did you do any change after publishing Lync topology?
Please run Step 2- Setup or Remove Lync Server Components again and then test the issue.
You can try to restart FE server and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
SQL Server Agent (MSSQLSERVER) service is failing to start
Hi All,
I am using SQL Server 2008 R2 Express edition. When i start SQL Server Agent (MSSQLSERVER) service it is failing to start and gives the below error.
On analyzing the Event logs i found the below event.
The SQL Server Agent (MSSQLSERVER) service terminated unexpectedly. It has done this 14 time(s).
Event id 7034
Event source: Service Control Manager.
I opened the SQL server configuration manager to change the service account and start the service, But that is also failing and it is giving the below error.
Can any one help in this issue ?
Gautam.75801Like Olaf said SQL Server Agent is available in express but cannot be enabled. This is restriction from MS. The reason is that(why its available and disabled) when you upgrade express to enterprise/standard it just uses this disabled SQL Server agent and
enables it. If this feature was not present SQL Server upgrade process would have to write whole code for SQL agent Which I am sure it does not do while upgrading to standard/enterprise.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
Oracle 10gR2 Patch Set 3 - Clustering Service (CSS) failed to start
Hi ,
we are using Solaris 10 containers. Oracle 10gR2 installation done with ASM in Non-global zone and it was successful, after applying patch set 3 CSS service unable to start and won't generate any error message.
OS : solaris 10
DB : Oracle 10gR2
any pointer will help us to resolve this issue.
Regards,
SachinHi,
Cause
1) This is a LANG problem. So this can be confirmed by tracing the init.cssd script (executed by the init/inittab), as follow:
h1:3:respawn:/etc/init.d/init.cssd run >/var/log/init-cssd.run 2>&1 </var/log/init-cssd.run
2) /var/log/init-cssd.run log extract:
TZ=
+ export TZ
LANG=
+ export LANG
+ /bin/who -b
+ exit 0
BOOTID= . system boot srp 7 16:44
+ /bin/cat /var/opt/oracle/scls_scr/db4/root/cssrun
RUNID= . system boot Aug 7 16:44
+ [ . system boot srp 7 16:44 != . system boot Aug 7 16:
44 ]
+ [ . system boot Aug 7 16:44 = startstack ]
+ exit 3
STATUS=3
+ [ 3 != 0 ]
+ exit 3
+ [ 3 != 0 ]
+ /bin/sleep 30
Solution
1) Set the LANG environment variable in /etc/init.d/init.cssd script (in GETBOOTID section) to cs_CZ.ISO8859-2:
# Set a null language id. GETBOOTID can also be sensitive to the language
# codes, when init.cssd is run in a user shell compared to being run
# under init. Setting a blank language code should guarantee consistency.
LANG=cs_CZ.ISO8859-2
2) Then CSS will start.
$>crsctl check crs
CSS appears healthy
Cannot communicate with CRS
Cannot communicate with EVM
$>ps -fea | grep ocssd.bin | grep -vi grep
oracle 407 1 0 Aug 13 ? 3:50 /oracle2/V10g2/bin/ocssd.bin
Best regards,
Rafi.
http://rafioracledba.blogspot.com/ -
I have Windows 7 Home Premium. I get this error when I try to start the Windows Search service. All of the solutions that I've seen talk about changing Security Settings | Local Policies | User Rights Assignment. However, from what I can determine in Home
Premium there is no way to access those settings or anything to do with group policies. Does anyone have any other ideas?
Thanks,Hi T_Meyer,
Thanks for feedback.
Actually, I am waiting for OP come back. In my first reply, I confirm the question first, because the
User Rights Assignment setting would be reflected to the registry data.
I know the current Home Premium does not contain the Group Policy Editor, but we need know if this is the real cause for this issue.
Back to the answer:
To edit the user rights, alternatively, we can use ntrights tool, although this is no longer supported after Windows XP, but we can still use it:
http://support.microsoft.com/kb/266280
set the SeSystemProfilePrivilege for NT Service\WdiServiceHost
we can get it from this download link:
http://www.microsoft.com/en-in/download/details.aspx?id=17657
Alex Zhao
TechNet Community Support -
3355 Mobility Service Engine failed to start
Hi,
After I initial MSE with the wizard. MSE take so long to start the service (more than 1 hour) with "Starting MSE Platform, waiting to check the status"
Then I decide to reboot the appliance, after that MSE shows the message "
Traceback (most recent call last) File "/usr/sbin/yum-updatesd", line 40, in ?
import gamin
ImportError: No module named gamin
Sent from Cisco Technical Support Android AppAre you not able to access the cli? If so, try to issue the following:
/etc/init.d/network status <--- check the status
/etc/init.d/network reload <--- if a service isn't running
/opt/mse/setup/setup.sh <--- to review or make changes to what was entered on the setup script.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered" -
Service keyagent failed to start when installing mac drivers on windows
I have installed windows vista 64-bit with no problems on my imac, tried to install the drivers of the mac disk but when it comes to start the keyagent it says i don't have sufficient privileges to start the system services and the same for starting the MacHalDriver, i have full admin rights under vista. Then i cant start bootcamp from vista the exe file does not work. All the other drivers have installed and worked correctly. Any help for this???
The solution outlined here:
http://discussions.apple.com/thread.jspa?messageID=7105319
using the torrent download fixes the problem. -
Itunes 8 - ipod Service failed to start
Hello,
Got the ipod service failed to start message appear when I upgraded to 8, managed somehow to get it working, this morning when I was prompted to upgrade to 8.01 it came up again and will not load so I have no itunes.
Help anyone? ThanksI hate to piggy back post but this still isn't answered and I have the same problem.
I try to connect my iPod to my desktop and the comp reads it as a disk but every time in iTunes it comes up with the iPod Service Module failed to start (or something). On my laptop it reads it just fine and as much as I could us my laptop instead of my desktop, I don't want to. Any help anyone?
Oh. I have also un-installed and re-installed multiple times, and I don't have any third party software on my iPod. Any help would be much appreciated. -
Welogic failed to start as a Windows services
I have installed Weblogic 816 and I am able to start it from command line. I also install it as a Windows 2003 Service but failed to start. The error is "Could not start the beasvc myserver service on local computer Error 1067: The process terminated unexpectedly"
What am I missing and how to debug it?
ThanksSee if you are following these steps given below URL while creating weblogic server instance as windows service.
http://ananthkannan.blogspot.com/2009/10/how-to-create-weblogic-server-as.html -
OAS - Services Failed To Start
Hi,
I recently installed Oracle Enterprise Applicaton Server 10g on my windows machine. Actually I installed the whole server to get Oracle Internet Directory and Oracle HTTP Server. At the end of the installation, during the configuration phase it failed start an Application Server service (second last step) of all the configurations. Then I just retried for some time but still no help. Following are th two services stiil failed to start with error code 1.
OracleDBConsoleorcl
Oracleoracleas2ASControl
Following services are Up and Running :) _
OracleServiceORCL
Oracleoracleas2TNSListener
Oracleoracleas2ProcessManager
OracleJobSchedularORCL
OracleCSService
As I said I want only two components to work with Oracle Access Manager for SSO I left it like that and move onto integration with WLS using SSPI connector. I think all my configurations are correct but SSPI is failing to get my user authenticated successfuly by giving me the error in SSPI log as 'Erro in SOAP Request'.
I am successfully runing my HTTP and OID servers. Following are the details from opmn status command
C:\OraHome_2\opmn\bin>opmnctl status
Processes in Instance: interhttp.ukdsk-hpoplaw.europe.temenosgroup.com
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
HTTP_Server | HTTP_Server | 5484 | Alive
OID | OID | 5000 | Alive
Are these two services are important to successfully acheive my setup or I can leave it like that???
If you need any other information from any logs please let me know and I will post it here to debug my problem please.
Thanks
SJunejoHi,
I recently installed Oracle Enterprise Applicaton Server 10g on my windows machine. Actually I installed the whole server to get Oracle Internet Directory and Oracle HTTP Server. At the end of the installation, during the configuration phase it failed start an Application Server service (second last step) of all the configurations. Then I just retried for some time but still no help. Following are th two services stiil failed to start with error code 1.
OracleDBConsoleorcl
Oracleoracleas2ASControl
Following services are Up and Running :) _
OracleServiceORCL
Oracleoracleas2TNSListener
Oracleoracleas2ProcessManager
OracleJobSchedularORCL
OracleCSService
As I said I want only two components to work with Oracle Access Manager for SSO I left it like that and move onto integration with WLS using SSPI connector. I think all my configurations are correct but SSPI is failing to get my user authenticated successfuly by giving me the error in SSPI log as 'Erro in SOAP Request'.
I am successfully runing my HTTP and OID servers. Following are the details from opmn status command
C:\OraHome_2\opmn\bin>opmnctl status
Processes in Instance: interhttp.ukdsk-hpoplaw.europe.temenosgroup.com
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
HTTP_Server | HTTP_Server | 5484 | Alive
OID | OID | 5000 | Alive
Are these two services are important to successfully acheive my setup or I can leave it like that???
If you need any other information from any logs please let me know and I will post it here to debug my problem please.
Thanks
SJunejo -
[SOLVED] systemd : services failing to start on boot
I have removed sysvinit completely as per the systemd wiki pages.
I don't usually re-boot very often so I'm not sure exactly when the problem started.
I only noticed this problem about 4 or 5 days ago.
But now whenever I reboot my machine 2 services fail consistently.
adsl.service
colord.service
They both start flawlessly once I can log in at a console.
I'm using kde and in the last couple of days, while trying to fix my problem, the kdm service has failed to start a couple of times too - saying there is no X server.
Before switching to systemd I never had any of these problems using the old rc.conf method. My DAEMONS array had the adsl service start after the network service.
I need some help and advice to find out what is causing the problem and how to fix it.
Last edited by bhrgunatha (2012-10-25 05:44:22)Thanks. That seems plausible. So I've been snooping at the journal.
journalctl -ab
Oct 25 17:06:13 starch systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
Oct 25 17:06:14 starch systemd[1]: Started Recreate Volatile Files and Directories.
Oct 25 17:06:14 starch systemd[1]: Starting System Initialization.
Oct 25 17:06:14 starch systemd[1]: Reached target System Initialization.
Oct 25 17:06:14 starch systemd[1]: Starting CUPS Printing Service Sockets.
Oct 25 17:06:14 starch systemd[1]: Listening on CUPS Printing Service Sockets.
Oct 25 17:06:14 starch systemd[1]: Starting Console System Startup Logging...
Oct 25 17:06:14 starch systemd[1]: Starting Restore Sound Card State...
Oct 25 17:06:14 starch systemd[1]: Starting CUPS Printer Service Spool.
Oct 25 17:06:14 starch systemd[1]: Started CUPS Printer Service Spool.
Oct 25 17:06:14 starch systemd[1]: Starting D-Bus System Message Bus Socket.
Oct 25 17:06:16 starch ntpd[381]: ntpd [email protected] Tue Aug 21 15:06:24 UTC 2012 (1)
Oct 25 17:06:16 starch ntpd[413]: proto: precision = 0.156 usec
Oct 25 17:06:17 starch ntpd[413]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
Oct 25 17:06:17 starch ntpd[413]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
Oct 25 17:06:18 starch ntpd[413]: Listen and drop on 1 v6wildcard :: UDP 123
Oct 25 17:06:18 starch ntpd[413]: Listen normally on 2 lo 127.0.0.1 UDP 123
Oct 25 17:06:18 starch ntpd[413]: Listen normally on 3 lo ::1 UDP 123
Oct 25 17:06:18 starch ntpd[413]: peers refreshed
Oct 25 17:06:18 starch ntpd[413]: Listening on routing socket on fd #20 for interface updates
Oct 25 17:06:18 starch dbus[384]: [system] Activating systemd to hand-off: service name='org.freedesktop.ColorManager' unit='colord.service'
Oct 25 17:06:18 starch dbus[384]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 25 17:07:03 starch dbus[384]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Oct 25 17:07:03 starch dbus[384]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Oct 25 17:07:03 starch dbus[384]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Oct 25 17:07:04 starch kernel: r8169 0000:02:00.0: eth0: link down
Oct 25 17:07:03 starch systemd[1]: Starting Manage, Install and Generate Color Profiles...
Oct 25 17:07:03 starch systemd[1]: Started Manage, Install and Generate Color Profiles.
Oct 25 17:07:03 starch systemd[1]: colord.service: main process exited, code=killed, status=6
Oct 25 17:07:03 starch systemd[1]: Unit colord.service entered failed state.
Oct 25 17:07:04 starch kernel: r8169 0000:02:00.0: eth0: link down
Oct 25 17:07:04 starch kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 25 17:07:04 starch kernel: PPP generic driver version 2.4.2
Oct 25 17:07:04 starch cupsd[380]: Unknown directive DefaultAuthType on line 26.
Oct 25 17:07:04 starch kernel: r8169 0000:02:00.0: eth0: link up
Oct 25 17:07:04 starch kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 25 17:07:04 starch pppoe-start[382]: TIMED OUT
Oct 25 17:07:04 starch kernel: NET: Registered protocol family 24
Oct 25 17:07:04 starch pppoe-start[382]: /usr/sbin/pppoe-start: line 193: 394 Terminated $CONNECT "$@" > /dev/null 2>&1
That seems to confirm your theory.
eth0 link is not up when attempting to start colord and adsl
So the $64,000 question:
How do I defer them until eth0 is ready?
Or how can I force the eth0 link to be up before colord or adsl try to use it?
Last edited by bhrgunatha (2012-10-25 01:33:36)
Maybe you are looking for
-
How can I use Java to do Seismic programming as Motif?
One of my friend recently finished a seismic on-site data processing program using Motif on Solaries.He asked me if I can implement the same function to use Java language so that the program can run on different platforms such as Windows,Unix. Seismi
-
After downloading iTunes, my CD/DVD player on my laptop no longer works.
I downloaded the iTunes update when I got a new iPad. I now do not have any way to open my CD/DVD drive except with a paperclip. I cannot use the drive at all. It does not function any longer.
-
This is the issue I'm having when I export my Mail message as PDFs and try to read them in Adobe Reader XI Version 11.0.04. The line of text is cut in half by the page break. I don't know how to fix this. Can you help me, please? MacBook Pro, OS X
-
Paid for membership. Can't use Develop Module in LR5
I recently paid for the $9.99 monthly plan. I received an email confirming so and have been charged on my bank statement. When I try to use the Develop module in Lightroom 5, a message appears saying it is disabled and that I need to renew my members
-
Dropping signal, time to bin?
Please please help! I've had my graphite airport for what must be nearly five years without any problems. In the past two days it keeps dropping its signal to nothing despite always having full signal at all times up to now. Nothing has changed, same