Service not up after changing OS user password

Dear all,
11.1.0.7 on windows server 2003
We have installed 11.1.0.7 on windows 2003 .DB user is authenciated at the os level.we changed the domain user password and db is not coming up now ?
what could be the reason ?
Kai

KaiS wrote:
Dear all,
11.1.0.7 on windows server 2003
We have installed 11.1.0.7 on windows 2003 .DB user is authenciated at the os level.we changed the domain user password and db is not coming up now ?
what could be the reason ?
KaiDid you try to look at the error being reported during startup cmmand or in alert log?
Regards

Similar Messages

Soa managed server is not running after changing weblogic admin password

hi guys....
we have oim 11g deployment on weblogic 10.3.5 ....it was working fine....
we changed the weblogic user password through admin console and changed the boot.properties file also....after that we succcessfully started the adminserver but soa server is not starting and giving following errors...
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User weblogic javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic denied
     at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
     at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
     at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
     at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
     at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
     at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
     at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
     at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
     at $Proxy28.login(Unknown Source)
     at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
     at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
     at $Proxy46.authenticate(Unknown Source)
     at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
     at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:348)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:929)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Regards
jdev

Which boot.properties did you update Just the admin server? You need to update this file on each of the servers in the domain. Browse to the soa server directory inside the domain directory and there inside the security directory you should see the boot.properties file. You need to update the password in this file.
-Bikash

FaceTime not working after changing Apple ID Password

Using an iPad 2, FaceTime and Messages was working fine. Since changing my Apple ID password, FaceTime and Messages are no longer working. When I enter the the new password within FaceTime it states the password is not correct. I'm able to update Apps on the iPad using the new Apple ID password. Any idea how to get Facetime and Messages working again on my iPad?

I recently changed my Apple ID and, initially hit all sorts of problems (ML & iOS5.1). AppleTV very confused, Calandar duplicating entries on an iPad, but losing them on the Mac (but being correct on iCloud.com).
The solution ended up being straightforward, if unnecessarily annoying.
On the Mac - in SysPrefs (iCloud) turn off all syncs and sign out. Delete items from the Mac (in response to the prompt).
On the iPad - in settings do the same.
On the ATV - turn off Home Sharing.
In iTunes - log out of the Apple Store
Sign out on iCloud.com and sign back in using a @me.com email address (not the Apple ID)
Reestablish iCloud sync (etc) by signing in using the email address (not the ID).
It appears that everything collects the new Apple ID using the email address and they all play nicely together again.

"Login failed" after changing administrative user-password.

Hello,
we are administering 20 MacBook Pro (Pupil´s PCs) via Remote Desktop on the 21st MacBook Pro (Teacher´s PC).
On all pupil´s notebooks there are 2 Accounts: pupil = protected via Apple child-proof-lock and teacher = administrative account with all access rights.
Now the teacher´s password for all 20 pupil´s notebooks leaked . We have set a new teacher-password on all 20 pupil´s notebook - the pupils account did not get a new password.
But now we can´t connect form the administrative Remote Desktop Console on the 21st teacher´s notebook to the pupil´s notebook anymore. An error message appears: "The login at PC-Name failed." ... and we can´t find a way to set the new administrative password for the 20 pupil´s notebooks in Remote Desktop Console. When we change the passwords for the administrative teacher-accounts on the 20 pupil´s notebooks back to the old (leaked) one, the remote desktop function is working.
The next problem is, that we can´t change the main Remote Desktop Password on the teacher´s notebook, because nobody knows theses password. It was saved in the keystore (bunch of keys = "Schlüsselbund" in german!) - so we can login to the console without typing it in. But when we try to change the Remote Desktop password, we have to give the "forgotten" password!
We are using Remote Desktop V3.5.3 464.3 - unlimited license.
Every help is very welcome...
Regards from Germany,
Goldi2005

If I understand correctly, the machines have a new password, but ARD has the old one?
Assuming they are all the same account name and password, you can select all of the machines in the ARD list, do a Get Info (Cmd-I) and, under the Attributes tab, change the password for all 20 machines.

After changing the Oracle password - Shared services is not running

Hi All,
I am getting the below error after changed my oracle password.
SharedServices Log:
com.hyperion.hit.registry.exceptions.RegistryException: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-28001: the password has expired
     at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:213)
     at com.hyperion.hit.registry.RegistryConnection.getInstance(RegistryConnection.java:155)
     at com.hyperion.hit.registry.Registry.getInstance(Registry.java:309)
     at com.hyperion.eie.config.util.xml.XMLUtils.getDBConfigProperties(Unknown Source)
     at com.hyperion.eie.config.util.database.DBProperties.isDBConfigured(Unknown Source)
     at com.hyperion.eie.common.cms.CMSFacade.isCMSInitialized(Unknown Source)
     at com.hyperion.cas.server.CASAppCacheLoader.run(CASAppCacheLoader.java:22)
Caused by: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-28001: the password has expired
     at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
     at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
     at hyperion.jdbc.oracle.OracleImplConnection.connectAndAuthenticate(Unknown Source)
     at hyperion.jdbc.oracle.OracleImplConnection.open(Unknown Source)
     at hyperion.jdbc.base.BaseConnection.connect(Unknown Source)
     at hyperion.jdbc.base.BaseConnection.setupImplConnection(Unknown Source)
     at hyperion.jdbc.base.BaseConnection.open(Unknown Source)
     at hyperion.jdbc.base.BaseDriver.connect(Unknown Source)
     at java.sql.DriverManager.getConnection(DriverManager.java:525)
     at java.sql.DriverManager.getConnection(DriverManager.java:171)
     at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:203)
     ... 6 more
Attempting to connect to database: Retry Count: 10
Shared Services couldn't be Initialized. The database is either not configured or not running.
Thanks,
PC

Hi John,
After changing the password only, I am getting the Oracle error"[Hyperion][Oracle JDBC Driver][Oracle]ORA-28001: the password has expired" in shared services log.
I changed the password for the schema called "System". But i configured my hyperion system with different schema "Hypconfig".
Thanks,
PC

Invalid User Name and Password after changing the sa Password

Hi All,
I've Installed SAP 9.0 PL 05 ,while installing I've given database details as
User Name : sa
Password : abcd
Installation got success and I could able to log in to listed companies.
But, after I've changed sa user Password in SQL Server
i.e
User Name : sa
Password : xyz
Now , companies are not listed , then I had reset the password in (SAP Business One Service Manager - > Configure Security - > SLD)
When I check after this companies are listing, But
If I try to login with my regular user it is saying
Invalid User Name and Password
for testing purpose I've reset the earlier password for sa and tried., then it is working fine.
does the sa password affecting anywhere?
how can I change my sa password and use normally?
any help or knowledge would be very helpful
Thanks & Regards
M G

Hi,
Please refer SAP note:
1882731 - Cannot Display Company List After Database User Password
Is Changed
Thanks & Regards,
Nagarajan

Dear support @Apple, I have tried to log in App Store with my Apple ID 3 times but never possible. I have tried to change password 2 times. It was successful.But soon after change of my password, I could not log in App store. It says always incorrect u

Dear support @Apple,
I have tried to log in App Store with my Apple ID 3 times but never possible.
I have tried to change password 2 times.
It was successful.But soon after change of my password, I could not log in App store.
It says always incorrect user name or password. But I input correct ! Because just I successfully changed my password through secret question.
Third time when I tried to change password, the page did not open!
So I checked my connection by netstat , and I trace the IP address ; 17.154.66.17 this is apple IP, but when I trace , it did not show the route. I will copy
Traceroute has started…
traceroute to 17.154.66.17 (17.154.66.17), 64 hops max, 72 byte packets
1 220.224.141.129 (220.224.141.129) 490.517 ms 64.527 ms 94.524 ms
2 115.255.239.97 (115.255.239.97) 65.157 ms 89.128 ms 89.806 ms
3 124.124.251.241 (124.124.251.241) 104.972 ms 79.051 ms 96.948 ms
4 * * *
5 62.216.147.137 (62.216.147.137) 102.266 ms 85.581 ms 88.352 ms
6 xe-0-0-0.0.pjr04.ldn001.flagtel.com (85.95.25.186) 221.939 ms 225.223 ms 236.605 ms
7 xe-11-0-0.edge5.london1.level3.net (212.187.138.53) 231.629 ms 232.045 ms 233.673 ms
8 ae-52-52.csw2.london1.level3.net (4.69.139.120) 373.798 ms 390.412 ms 383.277 ms
9 ae-57-222.ebr2.london1.level3.net (4.69.153.133) 382.653 ms 382.558 ms 376.740 ms
10 ae-43-43.ebr1.newyork1.level3.net (4.69.137.74) 405.088 ms 377.679 ms 386.527 ms
11 ae-91-91.csw4.newyork1.level3.net (4.69.134.78) 378.499 ms 389.733 ms 396.375 ms
12 ae-92-92.ebr2.newyork1.level3.net (4.69.148.45) 391.706 ms 389.605 ms
ae-82-82.ebr2.newyork1.level3.net (4.69.148.41) 381.615 ms
13 4.69.135.185 (4.69.135.185) 380.183 ms 414.398 ms 387.054 ms
14 ae-91-91.csw4.sanjose1.level3.net (4.69.153.14) 384.980 ms 381.375 ms 386.453 ms
15 ae-4-90.edge2.sanjose3.level3.net (4.69.152.209) 377.304 ms 365.457 ms 373.281 ms
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
31 * * *
32 * * *
33 * * *
34 * * *
35 * * *
36 * * *
37 * * *
38 * * *
39 * * *
40 * * *
41 * * *
42 * * *
43 * * *
44 * * *
45 * * *
46 * * *
47 * * *
48 * * *
49 * * *
50 * * *
51 * * *
52 * * *
53 * * *
54 * * *
55 * * *
56 * * *
57 * * *
58 * * *
59 * * *
60 * * *
61 * * *
62 * * *
63 * * *
64 * * *
What it means??
Please help !!
To post this question, I tried thierd time to change password, and before I tried to log in to App store, I logged in this community, and I could !
Then I could finally log in App store also.
But still I feel something is wrong with my connection.
Why the trace route does not show to the apple site ?

This is a user to user forum. Apple is not here. Apple does not answer questions here.
iTunes Support -
http://www.apple.com/support/itunes/
Mac App Store Support -
http://www.apple.com/support/mac/app-store/

Change OWB-user password after import

Hi there,
I set up a new empty 11.2 Warehousbuilder Repository instance, created a workspace and several DB-users (not in OWB) to prepare for MDL-Import.
Into that I run MDL-Import from 10.2 (it creats a MDL-file for 11.2), which was successfuly imported.
Immediatly after import I can not see any content as workspace-owner (may be logical since WS-Owner is not owner of any object imported ?)
and I can't connect as OWB-user as well.
So I tried to change imported OWB-user's password, but how to ?
OWB Install and Admin guide says in chapter 13.10.2, that I would not need to do anything special in OWB, just set password in DB as usual.
But I can't connect as those OWB-user !?
So how to change OWB-users password correctly ?
thanks for any hint.
LaoDe

seems my question wan't clear enough.
So here is an easy scenario step by step:
0. create a new empty Instance 11.2. Create several schema with only connect, resource grants to match later OWB-import's OWB-users.
1. create new, empty repository 11.2 + 1 workspace. OWB-Schema, who created WS = OWB_WS_OWNER
2. run Import from Export MDL-file. This includes several OWB-users.
3. After Import successful endet, no new objects, OWB-users or anything new is to see. (still beeing OWB_WS_OWNER). Even restart OWB does not show any new objects or OWB-users.
4. Can't connect to OWB with 1 of those imported Schema, to see any imported objects. Might be logical, because OWB-password for imported OWB-Schemas is unkown -> DB-Password does not help (what is logical).
5. As OWB_WS_OWNER or OWBSYS: how to change those imported OWB-user's password, when I don't see them as OWB-users ???
please help, thanks Laode

Will not allow me to change a user password

Okay this is a little different. This has gotten me a little puzzled and I am hoping someone with some knowledge about File Vault etc can help.
I have this machine where there is a user name and a password (that we can't remember) with File Vault turned on. We know the master password however the master password will not allow us to change the users password.
We have tried changing the Master Password to ensure that the password is not the issue and that was successful. We tried using the Master Password to try and change another user account (not with File Vault turned on) and it gives us no problems.
I have tried changing the password in System preferences and I get an error message CSSMERRCODE_MEMORYERROR. I tried going to the login screen letting the login attempts time out where it asks for the master password, then it prompts me to reset the password. No matter what I put in the "new" and "verify" (yes they both match) the screen just shakes and won't let me go any further.
I have repaired the permissions and tried resetting the password with the Leopard DVD and also came across no luck. Because the User has File Vault turned on I can not even back up the data so I just delete the account and re-create the user!
I am really stuck here and any help would be greatly appreciated.

Okay strangely enough, I tried to reset the password back. We had an old File Vault password that we changed to the current one and then changed again during this process. So taking what you said, I reset the Master password to the original one we had a long time ago. It did not allow us to change the password. However when I changed it back to the one we had changed it to a second time, it wouldn't let me change it at the login screen but it allowed me to change it in the Account Management under System Preferences.
So it is fixed. Needless to say I disabled File Vault and it will never be used again! Thank you for your reply it definitely helped me resolve this issue.

Error while trying to change the user password on OSX Lion

Hello,
I am trying to change the user password ( no admin user ) using the webinterface. I enabled the functionality in webservices on the server.
I can loginto the three line password changing form. After I enter the old and two times the new password, I get the information
"Your request could not be completed. The password server may be unavailable."
How can I fix this problem? I also tried https://discussions.apple.com/thread/2485167?start=0&tstart=0.
Thanks in advance for help.

I currently have this error on my 10.6.8 ML server when trying to change password.
In my situation, the message definitely comes from the password policies. As soon as I use a new password that respects minimum complexity (e.g. 8 characters min, 1 lowercase letter, 1 uppercase letter, 1 number), the password changes flawlessly.
It would be nice to change this horrible message to something more meaningful... If someone has any ideas on how to do this, thanks for sharing!

How to change Analyzer user password with Administration API?

Hi, I would like to change Analyzer user password with Administration API. Can someone post some sample commands to do the task? I would just like to write an application to change end user's Analyzer password. As I see I would need to do the following: 1. login with admin userid/password 2. execute some method to change password for required userid. I think the input parameter should be userid (of the user I would like to change password) and new password (the new password for the user). 3. logout Can someone post some sample code (commands to execute)? Thanks, grofaty My system: Analyzer Server 7.0.1. Essbase server 7.1 Windows XP SP2 

<blockquote>quote: <hr>Originally posted by: knightrich Hello Mr. Jordan. I would like to exchange some thoughts about "housekeeping" Analyzer reports in preparation for migration from Analyzer 7.0.0.0.01472 to 9.x: ... Did you solved such a problem or do you have an idea if it could be solved with the Admin API methods? ... Migration from 7.00 to 9.x: As we heard last week the "Migration Wizard for Reports" in 9.3 should be able to migrate reports. Do you have experience or more detailed information about that Wizard? Many thanks in advance knigthrich<hr></blockquote> knighrich, I'd like to be more help, but I have no experience with System 9. I did substantial cleanup when we migrated from Analyzer 6 to Analyzer 7.1, and even more cleanup when moving up to 7.2, but our installation is smaller in scale than yours and we didn't need to automate report cleanup. You might be able to get the ownership information you need through the back door, doing a direct query on the database, but simpler might be an export users, at least from 7.0. (This facility probably doesn't exist in system 9; it was dropped in 7.2 in favor of an undocumented API) The export file is an xml file that could easily be parsed to identify reports that have the administrator as user and then a second pass to delete those with otuer ownership as well. As previously suggested, you might be able to get this by a well crafted SQL query against the repository. Procedurally, we have both public reports that have the blessing of management and are widely available, owned by a "public owner", and private reports developed by indivdual users and shared or not. Our team maintains the public reports, but not the private reports. We may be asked to make a previously private report public and take over maintenance of it. I hope that you can find a solution that meets your needs. Certainly a call to customer support to identify a poorly documented feature would be in order.

Problem in RFC as JCO changed from user/password to SSO

Hi all
Initially i was using CO with user/password properties but now it has been changed to SO.
In my webdynpro project there are 3 RFC Models being used.
Out of which 2 are working fine and giving the desired results but 1 RFC works fine on the R/3 side but from the webdynpro side it does not work just displays bapireturn - "Not successful".
As the properties of the JCO changes to USer/password , the RFC works fine giving the desired results
Plz let me know wht cld be the problem
Thanks and Regards

Vindhya,
With SSO, the details of the user who's logged in goto R/3 and thus determines if the user has authorizations to run this RFC. This user could be different from the user you were using previously without SSO.
Meaning, this time, with SSO, the user is you whereas the user for user/pwd is someone else and you dont have authorizations to run the RFC??
And another thing, even if you can successfully run that RFC logging into R/3, your userid may not have RFC authorizations (which is required to do a RFC call). IF thats the case, you need to talk to your security/basis guys.
Lemme know if that could be the case in your situation.
Rajit
Message was edited by:
Rajit Srinivas

I am not able to change my icloud password

i am not able to change my icloud password as the two questions its asking i frgot the ans f dem and now dey are sending the email on my hotmail account which i dont use,

How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'. This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.

After changing my user id my iPad still brings up my old id when logging into the App Store. How do I fix this?

After changing my user id my iPad still brings up my old id when logging into the App Store. How do I fix this?

Did you change the ID in Settings>iTunes & App Store (on the iPad) also?
Note that any items purchased with your old ID are permanently tied to it and cannot be transferred to the new one.
~Lyssa

HT5312 It will not let me change my security passwords? What do I do?

My ipad will not let me change my security passwords and question and I don't know what to do

What do you mean 'my iPad will not let me change my security passwords' ? You are following the instructions on the HT5312 page that you postedi.e. if you have a rescue email address (which is not the same thing as an alternate email address) on your account then steps 1 to 5 half-way down that page should give you a reset link.
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset (these are user-to-user forums).
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

Service not up after changing OS user password

Similar Messages

Maybe you are looking for