Service not working- horrible customer service

Maybe if I write to you some other way besides calling in 15 times to explain the same thing over and over again and have nothing done this will help. I signed up for service 1 1/2 weeks ago. two or three days after signing up and having a tech come install my services , my on-demand crashed ,my Internet crashed and my cable boxes keep resetting by themselves. I called tech support and they couldn't solve the issue and had to escalate to tier 2 tech support , waited 2 days for the call back . They couldn't fix the issue. Sent me a tech to my home. After 4-5 hours here and switching boxes , trying to update firmware he was not able to solve . Told me Comcast would call me to let me know what his next step was and then for me to call him and let him know????? Anyway he also told me that the initial modem that was put in place was not the one I take therefore making my signal extremely weak even though I pay for the faster service. No one has called not even a courtesy call, no one can tell my why my service isn't working or when it would be fixed . I have called in around four times and you can check my notes if you want and I keep getting told that I'm going to get help and I don't yesterday a supervisor told me a technician to come out and make sure he gets it fixed . NO ONE called . NO ONE showed up. Still my services do not work. I called Comcast today 2 times I was on hold for 47 minutes and after 47 minutes was told I would get a call back . Still nothing . I am definitely going to look into another service provider and the way you do business is very sad and extremely u professional . And you expect me to pay a bill this week for a service I haven't even been able to enjoy . This is ridiculous no one knows what's going on Comcast . Horrible service . Would appreciate it, if anyone that works for Comcast can assist me at this point before I cancel I would greatly appreciate it . [email protected]

Hi npetten,
Welcome to the Palm forums! Sorry to hear about your issue. The reason that you haven't heard similar stories is that GPS completely works on the phone. I don't know why support would tell you otherwise.
First, let's check to make sure you enable GPS on your phone.
Open the Location Services App (it's on the 3rd page of the launcher)
Tap Preferences in the top left
Tap Locate Me Using...
Make sure GPS and Google Services both have checkmarks next to them
Now, try using GPS again. If your still having problems, please post back with answers to the following questions:
What application are you using to get your location?
What is your signal strength? Can you browse the web?
Has GPS ever worked before?

Similar Messages

C540 wireless not working (horrible customer warranty support)

Just spent the last 3 hours of my life doing 1) on a call with tech support unable to troubleshoot wireless networking 2)getting disconnected TWICE with no call backs even though you have my number 3) unable to call back into the system all lines are busy and no way to connect online with support to restablish the connection.
If you can read this. I'm absolutely disappointed with the level and mechanisms for support.
Please contact me Lenovo. Otherwise, I'm never buying a Lenovo product again. Also, I will affirmatively tell my friends and family of my experience if this is not resolved.
This thing is brand new, and there should be a systemic way to troubleshoot wireless networking.
PLEASE CONTACT ME LENOVO

if you are out of warrenty the two phone options you have are 49.99 per incident or 99$ for a year of phone support. this does not cover hardware. if you wish for free support, here, or hp email or hp live chat can assist you.
I can assist you here. First, check in device manager to see if your system sees the wireless card.
Click start
click control panel
click classic view (link on the left)
open device manager
click the arrow or + sign in front of 'network adapters'
list what you see here
Signature:
I currently work on behalf of HP for numerous support departments. The opinions expressed above are the personal opinions of myself, not of HP. There is no guarantee that the opinions expressed are 100% correct.

Execute Query not working on custom forms

Hi
After upgrading from 11.5.10.2 and Oracle 9.2.0.5 to ATG6, AD6, oracle 10.2.0.4, Forms 6.0 (Form Compiler) Version 6.0.8.28.0 . The execute query (F11 & CTRL F11) is not working on custom forms. But after tabbing from one column to another column then press CTRL F11 is working.
Please any one help me on this issue.
Thanks
sva

Hi
I found this error in the trace file. Please help me what is the problem, the data is there in the table.
Out Argument 0 - Type: String Value: ORA-01403: no data found
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: parameter.G_query_find
Out Argument 0 - Type: String Value: NULL
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND MESSAGE_CLEAR
MCXQPBULKINVOICEENTER, -1, Built-In, Entry, -1196178744, USER_EXIT
TSE FSERVER_START -1 1407 1279530838565801000
TSE FSERVER_END -1 0 1279530838579778000MCXQPBULKINVOICEENTER, -1, Built-In, Exit, -1196091744, USER_EXIT
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_debug.clear
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_GROUP Built-in:
In Argument 0 - Type: String Value: APP_DEBUG
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_debug.free.
In Argument 1 - Type: String Value: global.frd_debug
Executing MESSAGE Built-in:
In Argument 0 - Type: String Value: FRM-41003: This function cannot be performed here.
In Argument 1 - Type: Number Value: 121
Unhandled Exception ORA-100501
State Delta:
MCXQPBULKINVOICEENTER, -2, Trigger, Exit, -1190876744, ON-ERROR
##### CTIME STARTS HERE
# 8 - MCXQPBULKINVOICEENTER:BLOCKNAME.RADIO_BUTTON81.1279530839956685000
KEY Execute_query
Error Message: FRM-41003: This function cannot be performed here.
N-ERROR Trigger Fired:
Form: MCXQPBULKINVOICEENTER
State Delta:
MCXQPBULKINVOICEENTER, -2, Trigger, Entry, 181183256, ON-ERROR
MCXQPBULKINVOICEENTER, -1, Prog Unit, Entry, 181304256, /MCXQPBULKINVOICEENTER-3/P58_07_DEC_200909_04_40
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_standard.event. Event is ON-ERROR.
In Argument 1 - Type: String Value: global.frd_debug
Executing ERROR_TYPE Built-in:
Out Argument 0 - Type: String Value: FRM
Executing ERROR_CODE Built-in:
Out Argument 0 - Type: Number Value: 41003
Executing ERROR_TEXT Built-in:
Out Argument 0 - Type: String Value: This function cannot be performed here
Thanks
sva

Reverse Engineering is not working for custom

hi odi guru's
i installled Hyperion 11.1.2.2 and ODI 11.1.1 . while doing reverse engineering is not working for custom purpose.
Iam working with Hyperion Financial management with odi. created dataserver and physical schema and logical schema
and imported RKM HYperion Financial Management Knowledge module.
is it required for hyperion latest patches to connect with odi. Please let me know . urgent?
Thanks in adavnce

hi
is it required for hyperion patches to connect with odi?
iam getting following error.
ODI-1217: Session HFM_Model (5051) fails with return code 7000.
ODI-1226: Step HFM_Model fails after 1 attempt(s).
ODI-1229: An error occurred while performing a Reverse operation on model code HFM_MODEL.
Caused By: org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 38, in <module>
     at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
     at com.hyperion.odi.hfm.ODIHFMAppReverser.connect(ODIHFMAppReverser.java:27)
     at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver.
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)
Caused by: Traceback (most recent call last):
File "<string>", line 38, in <module>
     at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
     at com.hyperion.odi.hfm.ODIHFMAppReverser.connect(ODIHFMAppReverser.java:27)
     at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver.
     at org.python.core.PyException.fillInStackTrace(PyException.java:70)
     at java.lang.Throwable.<init>(Throwable.java:181)
     at java.lang.Exception.<init>(Exception.java:29)
     at java.lang.RuntimeException.<init>(RuntimeException.java:32)
     at org.python.core.PyException.<init>(PyException.java:46)
     at org.python.core.PyException.<init>(PyException.java:43)
     at org.python.core.Py.JavaError(Py.java:455)
     at org.python.core.Py.JavaError(Py.java:448)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:177)
     at org.python.core.PyObject.__call__(PyObject.java:355)
     at org.python.core.PyMethod.__call__(PyMethod.java:215)
     at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
     at org.python.core.PyMethod.__call__(PyMethod.java:206)
     at org.python.core.PyObject.__call__(PyObject.java:381)
     at org.python.core.PyObject.__call__(PyObject.java:385)
     at org.python.pycode._pyx1.f$0(<string>:38)
     at org.python.pycode._pyx1.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java:165)
     at org.python.core.PyCode.call(PyCode.java:18)
     at org.python.core.Py.runCode(Py.java:1204)
     at org.python.core.Py.exec(Py.java:1248)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     ... 19 more
Caused by: com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver.
     at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
     at com.hyperion.odi.hfm.ODIHFMAppReverser.connect(ODIHFMAppReverser.java:27)
     at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
     ... 33 more
Caused by: com.hyperion.odi.hfm.wrapper.HFMException: Error occurred while loading driver.
     at com.hyperion.odi.hfm.wrapper.HFMServer.<init>(HFMServer.java:29)
     at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:51)
     ... 40 more
Caused by: com.hyperion.odi.hfm.wrapper.HFMException: no HFMDriver in java.library.path
     at com.hyperion.odi.hfm.wrapper.HFMDriverJNI.getDriver(HFMDriverJNI.java:23)
     at com.hyperion.odi.hfm.wrapper.HFMServer.<init>(HFMServer.java:26)
     ... 41 more
please help me , thanks in advacne

F4 help not working in custom backend service for PD form

Dear All,
Iam working with the Create position HCM PD form and i have a requirement to add two fields, one for the company code and the other is for the cost center and then create the relationship betwee the position and the cost center when the form is submitted.
I have defined a generic service and created an enhancement implementation and linked this generic service to the imppementaion. I have written the logic for the F4 help for the fields in the method GET_HELP_VALUES, i have written the scripting for the drop down field in the form to trigger the F4 help in the form.
When the cost center is being passed to the screen, i would then read the value of the cost center in the form workflow and create the relationship between S and K in the workflow as i am unable to achiev this in the design time of the PD form.
But my current problem in that he values are not getting passed from the method to the field on the screen. I have worked on quite a few scenarios for F4 help and doing validations in the implementation in the PA form and i have seen this functionality working fine.
My problem here is that i am unable to understand why the F4 value help is not working in my form. The standard PD service SAP_PD is also being used in the form to have the dropdown values for the account assignment feature.
Could you please suggest me with some clues to fix my issue? i can share more details for further analysis.
Thanks.
Best regards,
Sridharan

Hi Chris,
Thanks for your inputs. please see my reply to your questions
First....are you sure you have "marked" that field as possible for F4 help?
Reply: Yes
Second...are you populating the help values strictly from that method...ie. not also using do_operations method to do it. If you refer to the documenation, it points out that trying to use both can cause issues.
Reply: i am using only the GET_HELP_VALUES method and nothing written in do_operations.
Third...when you debug your method, do you "see" the help values actually populating and as you say "not coming back to the screen"? I would check this first to make sure that there are actually values being found (ie. the logic within your service is correct).
Reply: i have put the external break-point in this method and when the form in opened for processing by the HR admininstrator,the form openes up and the control is not being sent to the debugger. I have written the scripting in the exit event of the events and scripts as suggested in the SAP help document. SO when i click on the dropdown field in the form, the debugger starts and executes the method and the code executes, then no values are populated on the screen.
Fourth...are you using any generic services for populating help values as well. HCM P&F has a nasty habit of "if one GS fails, they all fail" so often, your service might work fine but an error in another makes yours appear to fail as well....hard to debug and find those kind.
Reply: Yes i am using the generic service mainly for the purpose of F4 help. I do not see any issue with other gneric services as i have implemented a few generic services for PA forms and they are working fine.
Fifth...oops...forgot the obvious one...make sure it isn't a security issue...ie. make sure you have access to read the cost centers you want.
Reply: I dont get any auth error in SU53 while i test the process in R3
Lastly, you said:
"When the cost center is being passed to the screen, i would then read the value of the cost center in the form workflow and create the relationship between S and K in the workflow as i am unable to achiev this in the design time of the PD form."
You actually should be able to do this using an Advanced/Enhanced Generic Service (if this is in fact the step at which you want a true update to occur). Just a thought.
Reply: Could you please give some more information about this, how can i achieve it in advanced generic service.
Appreciate more thougts from you Chris!
Thanks,
Sridharan

Flex Print Job not working with custom component

Hi All,
I have to print pages with header, body and footer. So the thought process was to create a custom component fro header, footer and body. Header component is based on Box, Body is a renderer (which will have fix value of items - and will decide the number of possible pages) and footer is again based on Box.
But when i created a simple Custom component like this for header
<?xml version="1.0" encoding="utf-8"?>
<mx:VBox xmlns:fx=http://ns.adobe.com/mxml/2009
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx">
<fx:Declarations>

</fx:Declarations>
<mx:HBox>      <mx:Label id="testLabel" text="Test Container"/>
</mx:HBox>
</mx:VBox>
Then when i try to add this to FlexPrintJob, and save it as 'xps' to see the print output, i get error message that this file is in use or damaged.
    var myPrintJob:FlexPrintJob = new FlexPrintJob();
if(!myPrintJob.start()){
      return;
var header:Header = new Header();
header.width = myPrintJob.pageWidth;
header.visible = false;
FlexGlobals.topLevelApplication.addChild(panierPrintHeader);
myPrintJob.addObject(header);
myPrintJob.send();
FlexGlobals.topLevelApplication.removeChild(panierPrintHeader);
But this does not work and i get the above mentioned exception. Now when i not use the custom component and just have a label or HBox or anything on stage before the print functionality is invoked, it works fine. And this too haapens only if you have a mxml component, i tried by creating a new Label component using actionscript and then provide the same to the printJob, which did not work either. I need help on this, else i will have to take print functionality to server side(Java) which has some business implications, the reason why i am spending time on flex for printing.
Thanks and Regards,
Jigar
Looks like custom component print is not working fine with flex or i am doing something terribly wrong.
Looking forward for help.

Is there nobody in flex community who can help on this....
Looks like a toothless class that adobe actionscript team has provided, which is not liked across much

Find and item Search not working inside custom list in sharepoint 2013

HI,
In Sharepoint 2013 , i configured the Search. it is working in home page search Box and Find item search box inside custom list as well But one particualr custom list Find an item is not working. Any clue ?Thanks in Advance
Thanks
sanjay pradhan

Hi,
According to your description, my understanding is “find an item” search box in a custom list not work in your environment.
As search box and “find an item” search box in your home page are working, so the search service application is working.
Do you have any customzation to the particular custom list ?
If No, I suggest you can full crawl the data in Central Administration ->Manage Service Application->” Search Service Application”-> Manage Content Sources” to test if it works.
Also, please check if you have set "Allow items from this list to appear in search results" in list settings->Advanced Setting to true
Best Regards
Jerry Guo
TechNet Community Support

Discoverer Viewer/Plus does not work with Custom EUL owned by APPS user

I am facing a unique issue with one of my customers. They have a custom EUL named XX_EUL_US and this does not allow connecting through discoverer viewer or discoverer plus.
I have worked with custom EULS before at other customers and this was never the case. I am being told that this issue is happening as the EUL owner is APPS instead of some other user. Is this the case? Can discoverer viewer not be used with EULs owned by apps user?
Please not that the Default EUL in ICX profiles is set to this EUL and no other EUL profiles are set.
Appreciate any thoughts on this.

Hi,
I am not sure what you mean when you say you have a "custom EUL named XX_EUL_US". The EUL table should be created in a schema named XX_EUL_US. This will then be the EUL owner. You will then need to connect to Discoverer Administrator as the EUL owner and grant privileges to Apps users and/or responsibilities.
The user should then be able to connect to Discoverer Plus/View using their apps username, responsibility and password.
To be able to connect directly from an apps menu you need to have the ICX parameters set correctly. The ICX: Discoverer Default End User Layer Schema Prefix should be set to XX_EUL (without the _US). The ICX: Discoverer End User Layer Language Override should be set to US or not set at all.
Rod West

Java script is not working in custom tabular form

hai all,
i have changed my built in tabular form to custom tabular form.my java script is coding working fine in built in tabular form . But in my custom tabular form java script is not working ,since it is created as standard report(Display As).
pls help me.
with thanks and regards
sivakumar.G

Is the appostrophe function test(pthis) *'* present in your javascript code...
If not can you post the same in apex.oracle.com and give the credential so that I can the why its not wroking
Regards,
Shijesh

Transaction launcher not working for custom business role

Hi Experts,
I am facing a very weird problem where the transaction laucher define for BOR transaction is working for one business role(Z business role Customized one) but its not working for other business role (Z business role).
to emphasize further we have the code:-
case ls_attributes-object_type.
    when lc_z23 or lc_z25.
      lv_logical_link = lc_ZITISU.
    when lc_BUS2000115.
      lv_logical_link = lc_ZITERP1.
    when others.
      lv_logical_link = lc_ZITERP2.
endcase.
l_if_navigation = cl_crm_ui_navigation_service=>get_instance( me ).
IF l_if_navigation IS BOUND .
Navigate to transaction launcher using link id
    l_if_navigation->navigate( iv_link_id = lv_logical_link ).
ENDIF.
in this the logical link is is lc_ZITISU whenever this BSP application is called from both the business roles but in one the window opens up for BOR transaction whereas when we login again using different business role the code is the same as given above. I mean the sam logical link id is used and navigated to but window is not opening for transaction launcher as it happens for the previous business role.
Request your help to resolve this issue.
Thanks,
Rajwin

Hi,
I tried by applying the PFCG role id of business role which was working to the business role id of the one for which it wasn't working and then try testing whether the transaction launcher is triggering. But the transaction launcher screen is still not opening even after doing this.
Probably there's something else too which is causing the problem. Request your inputs on this,
Thanks,
Rajwin

Controller Error is not working for Custom Responsibility

Hi All
I create a controller , Its working with Standard Responsibility. I am Setting two Values , One from database Column and other from calling a custom funciton . Its working in Standard Responsibilty.
But same thing I am trying in Custom Responsibility , Its showing One value ie database value, But not The function return value.
Is it the issue with security?

hi Gyan,
ex;
XXResp is custom Resp : Profile attach is HR Security Profile
If you remove this Security Profile , the Controller Works.
But if u set the Controlller it does not work.
Thanx

FND_STANDARD.SET_WHO is not working in custom form

Hi,
I have a custom form and in that to update the WHO columns I used "FND_STANDARD.SET_WHO;" in block level in "PRE_INSERT" and "PRE_UPDATE" triggers. But it is not working. Any ideas on this? can this be because of a missing library? I can see appcore and appcore2.

This forum is for Oracle Forms. It appears that your issue has to do with Oracle E-Business Suite: {forum:id=475}

Scroll over highlight function not working on custom nav bar links

Hi - I've created a custom nav bar in iWeb (www.HollywoodRC.com). I have it set up so that the text highlights when scrolled over. This function works in iWeb but does not work on my published site in Safari; however, works in my published site on IE. Any ideas on how to get the scroll over highlight to work on my published safari site? All the links work properly.
Thanks,
Steve

No. Things must have changed. I created a hyperlink with a non web safe font, LedgerD, added a drop shadow and published. I also put the same link in a shape. You can see them in this test page: Page-1 . The two items are image files but they do not contain the link text. Very strange. The hyperlink text can't be selected nor dragged to the desktop like other links, like the Click to Play links on the page, however.
However, I don't know how IE will handle it. According to this IE emulator site, http://ipinfo.info/netrenderer/, IE can see the drop shadow. But it doesn't tell us how the links will work.

LDAP Sync is not working on custom attributes

Gurus,
I have installed and configured OIM 11g release 2. While configuring OIM, i have enabled ldapsync to OID.
Created a custom attribute in OID and also on OIM. But when I change this attribute in OIM, that change is not going to OID and vice versa. There are not errors in the logs.
Please throw some light on this.

While creating a custom attribute in oim, you will give label, name right..At the same time there will be an option to provide ldap attribute name. You need to provide the name of the attribute that you created in OID here. Then only ldap sync will work on custom attributes. without specifying ldap attribute name, ldap sync wiill not work.
Give a try and post your results here.

BT848 TV not working with custom 2.6.22 kernel

Hi,
I installed a custom compiled 2.6.22 kernel (built the traditional way, using menuconfig in /usr/src/linux-2.6.22) but then tvtime could not work with my BT848 TV card (error message - "not a video4linux device" and "cannot open capture device /dev/video". The device is there and a simple video app. I wrote myself says:
cyclops: Opened V4L2 device: /dev/v4l/video0
cyclops: VIDIOC_QUERYCAP: error 25, Inappropriate ioctl for device
The TV worked with kernel 2.6.21, although to listen to radio with gqradio I had to start tvtime first to get any sound. I double checked my config but can't see anything missing, I have compiled custom kernels many times and so I could say I am not inexperienced. I am using latest Arch x86-64 on an AMD Athlon 64 machine.
Has anyone else experienced this problem?
My thanks in advance!

Hi,
I installed a custom compiled 2.6.22 kernel (built the traditional way, using menuconfig in /usr/src/linux-2.6.22) but then tvtime could not work with my BT848 TV card (error message - "not a video4linux device" and "cannot open capture device /dev/video". The device is there and a simple video app. I wrote myself says:
cyclops: Opened V4L2 device: /dev/v4l/video0
cyclops: VIDIOC_QUERYCAP: error 25, Inappropriate ioctl for device
The TV worked with kernel 2.6.21, although to listen to radio with gqradio I had to start tvtime first to get any sound. I double checked my config but can't see anything missing, I have compiled custom kernels many times and so I could say I am not inexperienced. I am using latest Arch x86-64 on an AMD Athlon 64 machine.
Has anyone else experienced this problem?
My thanks in advance!

Service not working- horrible customer service

Similar Messages

Maybe you are looking for