Service number price

Hi
when ever creating frame work order purchase requisition in me51n t.code i entering the service number any qty
system automaticaly takes price,how its takes.suggest
Regards
Sam
Edited by: sadaraji on Jul 1, 2011 11:20 AM

Hi,
Check Price maintaioned in ML45 t.code for service number, you are using to create PR.
Regards,
Biju K

Similar Messages

Service Number is not getting updated in the Purchase Requisition

Hi All,
When i create a Service PR using bapi BAPI_REQUISITION_CREATE FM , service details ( Service number, Qty, Gross price, ) are not getting updated in Service tab of Purchase requisition transaction. I am passing all the services related parameters in the FM.
Please clarify this.
Thanks for the help.
Vinoth

Hi Vinoth,
Are you getting any error in the return table?Can you show your coding?
Regards,
ravi

Service Number is not getting updated in the PR called by BAPI

Hi ,
When i create a Service PR using bapi BAPI_REQUISITION_CREATE FM , service details ( Service number, Qty, Gross price, ) are not getting updated in Service tab of Purchase requisition transaction.
I am passing all the services related parameters in the FM.
Thanks for the help.
F.F

Hi Amar,
need your help. i am facing the same issue.
how did you resolved it . please let us know.
Thanks,
Santosh

PR service line prices are to be adopted in the PO

Dear all
I wanted the PR prices for service lines are to be adopted in to the PO when PO is created with reference to the PR item. Is there any solution for this?
Thank you

But, it is not picking the prices from PR item, istead it is taking the prices from last PO (via info record) if it is consists of material number. But for services no prices are taken either from PR or last PO (because, we do not have service master)
Using setting in OMET, i can able to fetch PR prices in PO, but it is not applicable for Service PRs
Can you please suggest a solution?
Thank you

Service PO PRICE

Hi.
Can anyone tell me from where does the system pick the price for a service purchase order. as there is no way to maintain infor record for service number and vendor.
and one more thing where is this standard material type DINE used.
Regards
Sarfraz

Hi,
For service PO, system checks the previous purchase orders for that service and pick up that price.
If there is no existing PO system will look for the maintained price conditions for services with respect to plant,vendor and purchase organization in Tcodes ML33,ML39 and ML45.System checks this condition and if this condition exists then system praposes that price.If both are not exists in the system we have to give manually.
If you want to create a PO with the service material master then you create a service under material type DIEN and use that material number.
If you are using service master then you have to maintain short text and select the service master in the item details.
Thanks & Regards,
Rambhupal reddy

In ID object Communication Channel - Enter a value for Service Number?

Hi,
I have completed all the steps of this link upto 4.5 > 11,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
but when i activate my messge interfarence from senario tab list or change object tab list, <b>it is showing error that :
Check Result for Object Communication Channel(GeneratedReceiverChannel_XI ) Enter a value for Service Number</b>
address type: URL Adress
target host: my bi server aibid
Service Number: ?????????
Path: /sap/xi/engine?type=entry
What is the Service NO.
Best Regards,
Dushyant.

Hi,
>>>>The serice number is ur port number. In your XI system URL http://host:port/rep/start/index.jsp
this is the j2ee port and he should put http port
as his path is: /sap/xi/engine?type=entry
on WAS ABAP I guess..
Regards,
michal

My i-phone Not charging because Sunken pins and Green Belt3 Power Mac Center said even my warranty still open until 30 October they cannot do nothing and refer me to a Toll Free Apple customer Service number..my question for what are thwy there?

My i-phone 5s is not charging because of Sunken pins where the socket is plugged. According Power Mac Center at Green Belt3 even my warranty still open until 30 October they cannot do nothing and refer me to a Toll Free Apple customer Service number in Singapore!!! ..my question for what are they there? not alt all very friendly and helpful!!

Send an e-mail with all this in it directly to Tim Cook. Seriously. You can send e-mail to him.
You might also try this forum here for more ideas: http://forums.macrumors.com/index.php?

What is the service number in INTEGRATION_DIRECTORY_HMI

Can any one tell me What is the service number in INTEGRATION_DIRECTORY_HMI.
Is it J2EE PORT (THE WE FIND IN xi home page URL)OR HTTP PORT (the one we find in SMICM > Goto > services)
-Naveen.

Hi,
It should be 5<Java inst no.>00
Also have a look into this document
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Regards,
Prakash
Message was edited by: Prakash Arunachalam

Service Number In Receiver communication channel

Hi Guys
Can u plz tell me what value should i enter against <b>Service Number</b> while creating communication chanell in ID integration directory

Ajay,
You are talking about XI adapter, right??
For service number use tcode SMICM in R/3 then <b>GOTO -
> Services</b> and take the HTTP port no. (starts with 80xx e.g. 8051).
Regards,
Sarvesh

Service Number/Port Number in HTTP receiver adapter

Dear Experts,
I have a scenario where I am to do HTTP Post to a 3rd party web application via a url in the following format:
https://x.y.info/abc/sap/customer.cgi
The HTTP Post data is submitted to the CGI script which is then processed further by the web application. The URL works ok via IE or even PI soap receiver adapter is able to post XML message to the URL but using SOAP.
But I have to do only HTTP Post and now my problem is that the URL dont have a so called port number that I can fill in the "Service Number" field in HTTP receiver channel or in SM59.
Does SAP always need a service number or how to deal with this case where server doesnot expose the port.
Thanks in advance.
Br
Suman

Hello,
The HTTP Post data is submitted to the CGI script which is then processed further by the web application. The URL works ok via IE or even PI soap receiver adapter is able to post XML message to the URL but using SOAP.
By definition, the SOAP Adapter is also using HTTP POST as its HTTP method the only difference is that there is a SOAP Envelope that is being sent.
But I have to do only HTTP Post and now my problem is that the URL dont have a so called port number that I can fill in the "Service Number" field in HTTP receiver channel or in SM59.
Service number is the port number of the URL that you will be connecting to, if it is not shown, it is assumed that it is 80 for http and 443 for https (as Gzegorz mentioned). Since you are using HTTPs, you should use HTTP Destination that points to an SM59 configuration.
Hope this helps,
Mark

Regarding change in the account number for an existing service number.

Hi,
Here the scenario is as it goes:
A customer with an account number(20xxx) has a service number(4206xxxxxxx) mapped to it.
In the month of September. Till 28/09, the account number is mapped to this service number. For the next two days. It has been moved to another account number(22xxx)
Now in the Billing Summary/Account Summary when I select the month of September, it should show me both the account numbers one contains some data and some contains the other. But it is showing only the old account number in the drop down.
select * from
select unique
'false' checkbox,
ad.account_key as account_key,
ad.account_num as account_num,
ad.contact_name as contact_name
from
EDX_RPT_ACCOUNT_DIM ad,
select
xr4.*
from
select
xr3.CHILD_KEY,
xr3.OBJECTURI,
xr3.OBJECTTYPE
from
EDX_RPT_HIERARCHY_XREF_DIM xr3
where
xr3.OBJECTTYPE='edx:amf:billingaccount:'
start with child_key in (?)
connect by prior child_key = parent_key
) xr4
EDX_RPT_HIERARCHY_NODE_PERIOD np
where
xr4.CHILD_KEY=np.XREF_KEY
and np.PERIOD_KEY=?
) xr5
where
xr5.OBJECTURI='edx:amf:billingaccount:' || ad.BILLER_ID || '|' || ad.ACCOUNT_NUM
and ad.ACCOUNT_NUM like '%' || ? || '%'
and ad.contact_name like '%' || ? || '%'
order by
account_num asc
order by
account_key asc;
Please let me know how to edit this query.
what I have done was: I removed this part " and ad.ACCOUNT_NUM like '%' || ? || '%'" and it was giving me all the account numbers in that month. But it was user specific and it may affect some other users.

Can you post some example data and expected output in a way we could use it?
And please edit your post to format the code using {noformat}{noformat} tags.
You've been a member here for long enough to have an idea how to ask a question and format code.... please read {message:id=9360002}

Standard report per Service number

Hi,
Is there any standard report available per <b>service number</b> to find out how much procurement has happend in given period of time. And to find out the open POs?
Regards,
Sattuj

Hi,
Use Transaction code <b>MSRV6</b> or you can check with <b>ME2S.</b>
Hope it will help you.
Regards,
Manish

External Service Number(Service Entry Sheet)

Dear All,
I want External Service Number( EXTSRVNO) In Service Entry Sheet (item level) to be get displayed while doing the
MIRO Txn.
Please suggest how to include field EXTSRVNO in MIRO screen at item level.
Thanks & Regards
Akshay

Hi,
As per my knowledge. The Miro trxn depends on the Purchase order. and the Service entry sheet and invoice are the mannual doccuments which are not get included in each other but you can view them in the Po history only. and if you want to add it any how u have to maintain it in text only. becoz system will check you invoice depend on the material came in side the invetory but not on Goods receipt no. in the system.
Please try your self.
Regards,
Ninad Kshirsagar

Table name to store the Condition of service number in ML81N

Hi All,
Is anyone can advise where does the condition values stored for each service number in ML81n.
Can you please provide the table name. Thanks,

Hi,
I required to get the item conditions values for each services in ML81N. Is these conditions value are stored in KONV table and what are the Key data i need to pass in to KONV to retrieve those data? Appreciate your advise. Thanks.

HTTP Receiver - Service Number

Hi,
I have a proxy to HTTP scenario. I have been given by external party with a url along with portnumber.
Do i need to enter the portnumber as service number or is it something different? They have given two ports one for http and another for https.
Alternatively if i use http destination, in the service number i need to give port number right?
With this assumptions I had configured and made test connection and got http 400 bad request error. Can i assume that the http server has been pinged successfully as only 400 bad request came or did the connection not successful at all.
Regards
Sam

Hello Inaki,
I got an example html web form sent by the third party where it uploads the data to the server. I had tested and it works fine. Since in the manual method, you need to key in the input parameters and upload the xml file using the browse and submit button.
I was under the assumption that in automated method, the xml payload will automatically uploaded to the server since the header xml had the exact two parameters and the actual file as data.
The example form has two input parameters and one XML file upload button. I am pasting that html code here
<html>
<head>
    <title>Simple form for pushing a feed</title>
</head>
<body>
    <h1>Simple form for pushing a feed</h1>
    <form enctype="multipart/form-data" method=POST
      action="http://<APPLIANCE-HOSTNAME>:19900/xmlfeed">
      <p>Name of datasource:
        <input type="text" name="datasource">
        <br>
        (No spaces or non alphanumeric characters)
      </p>
      <p>Type of feed:
        <input type="radio" name="feedtype" value="full" checked>
        Full
        <input type="radio" name="feedtype" value="incremental">
        Incremental
        <input type="radio" name="feedtype" value="metadata-and-url">
        Metadata and URL
      </p>
      <p>
        XML file to push:
        <input type="file" name="data">
      </p>
      <p>
        <input type="submit" value=">Submit<">
      </p>
    </form>
</body>
</html>
Regards
Sam

Service number price

Similar Messages

Maybe you are looking for