Service on ESS with display option

Hi,
We use ESS with EP.
The service PZ03 & PZ28 for Bank information and Previous employer details respectively, when attached, provide change option to the employee.
I have a requirement wherein i want them only in a display mode. Is there anyway that any other Tcode may be assigned ot the role so that it may be given only in display.
Pl. confirm if EP has an option of display alone.
Pl. suggest.
Thank you.

Thanks for the response Vijay.
Your response to my first question is helpful. The rest of them, though relevant, will be used by me at a later stage by me.
The rest thrree of my questions were concerning the SPRO settings under the Menu in IMG > Employee self service & Employee self service (ITS). I would like to know how those settings are relevant to ECC 5.0.
According to my research, ESS (ITS) are for versions before ECC 5.0. We currently use ECC 5.0 with EP 6.0. Despite ECC 5.0, services have been used for the portal in our base implementation. Iam currently doing a rollout project and unable to understand the difference between the ESS & ESS (ITS) menu in IMG. These two nodes have some common serive settings (ex. personal info, Leave request , etc. ). Hence would liek to know if settings in one of these would over wriete the settings in the other.
Hope i have been more clear in my question this time. I paraphrase the last 3 questions of my previous query:
1.  If the services (eg. PZ01, etc) are used in ITS version in our current system, what is the relevance to the settings in the ESS node in IMG as compared to those in ESS(ITS)?
2. There are some nodes in ESS and ESS ITS that are common. Do the settings in one of these overwrite the other? (Ex: Personal information,Leave request, etc.)
3. Can i copy the standard services liek PZ03 into the Z domain on T code SDH0 and give only display option to the employee on the portal?
Also would like to know if there is anything technical i need to read up on (any technical prerequisites)  if iam interested in learning / working on ESS & MSS in depth. I come from an non-technical background and an MBA in HR.
Pl. suggest.
Regards

Similar Messages

  • Document type wise PO with display & optional purchasing group.

    Dear All,
    we have six document type from NB1 to NB6 every document type has separate no ranges, & having three field selection as Me21n, fof, NBF,
    in Spro MM Define screen layout at document level, in that we assign document type NB5 & attach field selection FOF in that purcahsing group is optional.
    same other dovcument types we assign field selection Me21n & we assign purchasing group is Display option.
    our requirement is that when i select documenyt type NB5, purchasing group will optional not in display.
    But system shows display & we cant do PO.
    Please guide me or any other config.
    Thanks
    Shital

    Hi,
    System is giving first preference to Field Selection Key ME21N, so you have to reverse the condition. 
    Maintain ME21N as optional and assign document type NB5 to it and
    For  other dovcument types Create another Field Selection Key with purchasing group as Display option and
    assign that field selection key for purchasing group is Display option.
    Regards

  • Blank page displaying when clicking on the service in ESS

    Hi All,
    MyExpenses & Leave Request services under ESS is displaying blank page when i log into the portal with test user. When i log in with my user id , both are opening and working properly. 
    all the remaining services are working properly.  for some users, it is working properly and for some users it is displaying blank page.
    To work the service properly with the test user, what properties or authorizations i have to set in portal / backend.
    pls post answers.  This is the third time i am posting this question.  I did not get answers for this... its very urgent issue.
    Regards,
    Vila.

    Hi,
    The problem seems to be due to lack of proper authorisation.
    Go to Portal content->Contents provided by SAP->Open the permission editor of the folder 'End User Content'.
    Therein enter eu_role and check the box corresponding to the end-user. Now assign the users eu_role and ESS role.
    If everyone is going to use ESS, then 'End User content' to the Group 'Everyone' with read access and then assign the ESS role to the  'Everyone' group.
    Hope this helps !
    Regards
    Srinivasan T

  • We r using os 10.6.8 and 7.0.3 fcp,in that rendering with unlimited option out of memory warning is displayed Final Cut Pro 7, Mac OS X (10.6.8), 10gb RAM.no stills are there.there are hd standard

    we r using os 10.6.8 and 7.0.3 fcp,in that rendering with unlimited option out of memory warning is displayed, 10gb RAM.no stills are there.there are hd standard videos

    What format are your sources and what are your sequence settings?  I'd guess that you're working with h.264 material which is not fcp friendly.  If so, use compressor to conver to prores422

  • Authorizations to restrict Query Designer with Only Display option

    Hello,
    I have looked all most all possible ways in internet to find out a suggestion/solution for the below. But Invain.
    I would like to know the Transactions, authorization objects and profiles  that are responsible to restrict users not to change and copy queries from QD.
    I need only display option for queries.
    Also,please confirm shall we restrict the same from Transaction SCC4.
    Thanks In Advance.

    Hi there,
    Since you're talking about a QD system, you should lock it in transaction SCC4.
    In case you need to change things in QD without opening the system in SCC4, you can go to transaction rsa1->transport connection and click on Object Changeability. In there you can define what paricular options are "opened for changes" even with SCC4 in close mode.
    Also, for roles having that objects, you should use the authorization object S_RS_COMP and S_RS_COMP1 with Activity with value 02 - Display
    Diogo.

  • ESS SAP ERP 2005 - Changes to Biz cards - no edit opt - only display option

    Hi Gurus,
    I have requirement where the users should not be able to edit their address information of a particular subtype. Like primary address etc. This has to go through the payroll department. What ever. So my requirement is on the Overview screens, the biz card for a particular subtype should not have edit and instead just have the display option. Has any one done this before? Any inputs??
    I tried to investigate but I see that the control to create Biz card goes to ESS/PER DC and from there on i went a bit clueless. My not so good Web dynpro programming skills might have also added to my mis adventure.
    Any help?
    regards
    Sam
    Message was edited by:
            sameer chilama

    Is this thread still open ? If yes , you have to have content administration rights.Go to the iView for addresses , ctrl+right click for each field you want to make ineditable and set it to disabled by clicking on the radio button .

  • Select-option or parameter with display mode

    hai experts,
    i need to give select-option or parameter with display mode in selection-screen.
    my requirement is.......
    to give last print out time in selection screen with display mode mean user cant able to change the time......
    reward avail for hope ful answer.....
    thanks in advance...
    regards,
    jai.m

    Hi jaya,
    write the following code.
    parameters: p1 type c.
    initialization.
    p1 = 'c'.
    at  selection-screeen output.
    loop at screen.
           if screen-name = 'P1'.
              screen-input = '0'.
              modify screen.
           endif.
    endloop.
    regards,
    Santosh Thorat

  • I have an issue with disappearing option for 1920x1080 in Preferences / Displays.

    Recently updated to 10.9 - have all updates installed - Mid 2010 iMac 21.5.
    I have an issue with disappearing option for 1920x1080 in Preferences / Displays. - After overnight shutdown, my iMac woke up and the screen resolution of my 2nd was set at 800 x 600 - the display a Samsung S22B150 was previously working properly at 1920 x 1080.  This option is no longer available in the system preferences - highest resolution available 1600 x 1200.
    I use my mMac for Photography and use the second monitor for the interface, leaving the iMac screen as a full work area for the photos.
    I have tried:
    Power down Monitor & restart
    Shutdown & restart
    Shutdown & restart in Safe Boot Mode (options same in Prefs)
    Power down Monitor & restart in Safe Boot Mode
    Ran Disc Utility - Repaired Permissions, verified both HDD & Mac OSX
    Udated Pram
    I am now at a loss, I guess I could try a recovery, and download/install  Mavericks again, but do not wish to do this if I can help it.
    I have searched the net to see if there are any Terminal commands to enable the resolution, but can find nothing.
    Anyone out there have any ideas, please.

    Back up all data. Quit System Preferences if it's running.
    Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
    ~/Library/Preferences/ByHost
    In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar. Paste into the box that opens (command-V), then press return. A folder should open. If it does, look for a file with a long name that begins "com.apple.preference.displays2". There may be several such files. Move them to the Trash.
    Test.

  • I bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

    i bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

    How is your iPhone's display different?
    You can check the model number by  going to Settings/General/About. These are the model numbers for the various 3 GS models;
    MB715LL/A (16 GB Black), MB716LL/A (16 GB White), MB717LL/A (32 GB Black), MB718LL/A (32 GB White), MC555LL/A (8GB)

  • Regarding Parameter with NO-DISPLAY option

    Hi,
    I want to create a check box with NO-DISPLAY option how can i declare it.
    Means i need to create a check box with default value 'X' and it should not be displayed in selection screen.
    How can i do it!
    Thanks in advance.
    Thanks,
    Deep.

    SORRY ,i forgot to see the check box..
    please write following code it wil work - 
    parameters: p_cbox as checkbox MODIF ID ABC USER-COMMAND CH DEFAULT 'X'.
    Check sy-ucomm = 'CH'.
    AT SELECTION-SCREEN OUTPUT.
    loop at screen.
    if p_CBOX = 'X'.
       if screen-group1 = 'ABC'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
       ENDIF.
    ENDIF.
    endloop.
    **award points****
    amit

  • In my 4s display option doesn't come to change colours when I go to Setting-General. I am bored with blue colour. Please advise.

    In my 4s display option doesn't come to change colours when I go to Setting-General. I am bored with blue colour. Please advise.

    Go to Settings > Wallpapers & Brightness.

  • We r using os 10.6.8 and 7.0.3 fcp,in that rendering with unlimited option out of memory warning is displayed

    we r using os 10.6.8 and 7.0.3 fcp,in that rendering with unlimited option out of memory warning is displayed

    10gb RAM.no stills are there.there are hd standard i.e 1920*1080.that is only video dvcprohd standard.

  • How to Save an image and retreve the same image with edit option!! ???

    I am facing with a problem
    I have a image which is preloaded, user accessing the image should be provided with a option of adding a text on some part of image etc and save it. Later when that imagine is tried and retrived it should display the edited and saved image and allow user to edit again.The text will be written in a square box which can be dragged anywhere on the image. Is java script and ajax best for this.?
    Can anyone help in showing the basic things i need to follow to achieve this.
    Thanks in Advance
    Edited by: aadi on Feb 12, 2008 9:41 PM

    You could try to write a web service that returns a byte array and convert the image to bytes, and convert it back into an image again.

  • ERROR ITMS-9000: "Unable to parse apple display options file: com.apple.ibooks.display-options.xml" at Book (MZItmspBookPackage)

    Hi, I'm En32, now trying to publish my first iBooks (epub).
    The package I created is always rejected to deliver with following error.
    Does anyone who can provide me a solution ?
    === error ===
    Package Summary:
    1 package(s) were not uploaded because they had problems:
              /Users/En32/Music/iTunes Producer/Playlists/10000448204.itmsp - Error Messages:
                        Apple's web service operation was not successful
                        Unable to authenticate the package: 10000448204.itmsp
                        ERROR ITMS-9000: "Unable to parse apple display options file: com.apple.ibooks.display-options.xml" at Book (MZItmspBookPackage)
    ===
    $ cat META-INF/com.apple.ibooks.display-options.xml
    <?xml version=”1.0″ encoding=”UTF-8″?>
    <display_options>
    <platform name=”*”>
    <option name=”fixed-layout”>true</option>
    </platform>
    </display_options>
    ===
    Actually, I'd like to use fixed layout so I use com.apple.ibooks.display-options.xml.
    This ePub file looks good because I can open it with my iPad - iBooks, however iTunes publisher always rejects this.
    Any solutions ?

    I was getting that error when I used OSX's default compress feature. I found a little utility called ePub Zip and used it to compress (zip) my ePubs and that did the trick. They then passed the validation. I got it here:
    http://www.mobileread.com/forums/showthread.php?t=55681

  • Rich text box used in Infopath Form not displaying option to get images from Computer

    Hello,
    We have used "Rich text box" in Infopath Form which is not displaying option to get images from Computer.
    Options available are : From Address, From SharePoint
    But if we Rich text box in list, then it works fine with "From Computer" option.
    can you please help me out to get this option.
    Thanks in advance.
    REgards,
    Jayashri

    Hi,
    From your description, there is no “From Computer” option to get images with rich text box in InfoPath form.
    Per my knowledge, by design there are “From Address” and “From SharePoint” options without “From Computer” option in rich text box in InfoPath form. As a workaround, you can develop a custom InfoPath Rich Text box to do it.
    About developing a custom InfoPath control, I suggest you create a new thread on the forum “Visual Studio Tools for Office”, more experts will assist you with InfoPath development.
    Visual Studio Tools for Office:
    https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=vsto&filter=alltypes&sort=lastpostdesc
    Thanks,
    Dean Wang

Maybe you are looking for