Service on out of warranty ATV blinking  amber & white

Has the always runs hot ATV fried the board or hard drive? Is any service available, or is it junk?

Flashing amber and white lights do indeed indicate a problem. I assume you've pulled all the cables and re-powered it up to no result.
If it's out of warranty you might enquire about repair, I don't if Apple do a repair service for the Apple tv's but it might be worth asking.

Similar Messages

  • My iPhone 5 has damaged, it is out of warranty,by plug in other iphone 5 charger it became warm and shut off, Now aim in Estonia here is no place to replacement service for out of warranty. Can anybody hep me to how to fix my iPhone? Is there any mail add

    hi any body please help me

    Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
    http://support.apple.com/kb/TS3694
    Solution below.
    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • Out-of-warranty iphone 3gs

    Now that the iphone 5 is out and the 3gs is discontinued/no longer available, will Apple still provide "out-of-warranty" service on the 3gs?  They used to service your out-of-warranty 3gs for 150 dollars.

    As of now:
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model
    Out-of-Warranty Service
    iPhone 5
    $229
    iPhone 4S
    $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone
    $149
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax. "

  • How do I submit an application for an Express Replacement Service with an Out of Warranty repair?

    My iPhone has a cracked screen and a disloged homescreen button but has all of a sudden stopped working for longer than 10 minutes unless plugged into a power source. I have reasearched and would like to have it replaced under the Express Replacement Service for an Out of Warranty repair. I can't however, locate the page to apply for this service? Can someone PLEASE help me?

    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

  • Is it possible to request Express Replacement Service (out of warranty) through the online support?

    I fell in a river with my iPhone 4S in pocket and after trying the various tips for drying it out, etc, it will not turn back on at all and it is pretty clear it is kaput. I have determined my best option is to send it in to Apple for an out of warranty replacement, and I would really like to pay for the Express Replacement Service so I can get a new one ASAP (I live nowhere near an Apple Store, so that is not an option), but I do not see anywhere to request this through the online support method. Anyone know how one can request ERS online? I would just call in to request it, but I can't do that without a working phone.

    If it has been less than 12 months, the "Deauthorize All" command will be grayed out.  However, if you contact iTunes Customer Service, they can enable it for you.
    Do not start a new account unless you really need it.
    And yes, going forward, deauthorize a computer before doing any work on it.  If the computer is working and accessible, you can authorize/deauthorize it as often as you wish. 

  • My iphone5s has been opened, could i get Out-of-warranty repair service? it is still in One Year Limited Warranty

    my iphone5s has some problem with hardware. And someone has opened it for repairing. but he failed. Now, my iphone5s unable to boot. But it is still in One Year Limited Warranty. I am confused whether i can get Out-of-warranty service. Thank you!

    No. Apple will never touch that phone again. Go back to the "technician" that ruined your phone. Maybe he will offer you "warranty" service and give you some cash that you can use in buying a new phone.

  • HT3302 If my Iphone 4 has water damage, is it eligible for Out-of-Warranty (OOW) Service? And if it is, how do I proceed?

    If my Iphone 4 has water damage, is it eligible for Out-of-Warranty (OOW) Service? And if it is, how do I proceed?

    I know I can get it replaced, I want to know if I can get it fixed. Or at the very least have my memory backed up. I want the pictures that are on my phone

  • Ebay (Apple) refurb ipad eligible for out of warranty service?

    I bought a refurbished ipad off of the apple ebay store. I am looking into insurance for it (family ipad) but wondered if it is eligible for Apple's Out of Warranty Service. Anyone know?

    According to the following:
    www.apple.com/support/ipad/service/faq/
    "Apple reserves the right to determine whether or not your iPad is eligible for Out-of-Warranty service."

  • IPhone out of warranty replacement service

    I have had my screen replaced by a 3rd party several months ago, it has now developed a different fault - can I still use the out of warranty replacement service?
    Thanks
    Sarah

    No .
    You have waived any future support from Apple on that device once it was tampered with ( unauthorised opening by a 3rd party )
    wasn't a good move ,sorry

  • I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

    I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

    apikoros wrote:
    The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
    1)  I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access.  But do I have to  change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
    Resetting the password you will need to do for each device... the utility cannot even see those old units.
    So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
    2)  Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
    N.Korean hackers.
    [Edit] Whoops-- one more question:  I want to partition the TC's disk, but Disk Utility doesn't see it.  What do I need to do?
    You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
    Look at Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

  • MIFI4620LE Jetpack blinking amber light--does this mean the battery is bad? Should the unit operate without the battery installed if plugged in?

    MIFI4620LE Jetpack blinking amber light--does this mean the battery is bad? Should the unit operate without the battery installed if plugged in?

    The MIFI4620LE Jetpack does not work without a battery installed, even when connected to an external power supply.
    I personally think that was a dumb design. I would think the unit would use more electricity when continually charging the battery than just powering the unit it's self, but that's the way Novatel made them.
    If your Jetpack works with the battery installed and connected to an external power supply, but does not power on with power supply disconnected, I would say that the battery is defective or worn out.
    You should be able to go to a nearby Verizon Store and have them either test the battery or put a new one in it to see if it works. Then you will know if you need to spend the $$ for a new battery. OR if you always use your Jetpack at home, or in your car, just use the old battery connect to a power supply or your cigarette lighter and save the cash.
    As the Customer Support person stated, the slow blinking amber light is a normal state when the Jetpack is turned on and connected to Verizon's service.
    I hope this solves your problem.

  • Apple tv blinking amber and white

    What should i do when my apple tv is blinking amber and white ? Thank you for the Help

    manual says to obtain warranty service but try a few things first:
    http://support.apple.com/kb/HT1560 run diagnostics
    http://support.apple.com/kb/HT3199 factory restore
    http://support.apple.com/kb/HT1551 basic trouble shooting

  • Dell T3500 Blinking Amber 1-3 (4x) issue

    I have a problem with my Dell Precision T3500, the issue is that whenever I try to start the computer the power button it blinks amber 4 times and gives the number code 1 and 3 however it does turn on after a while. I assumed that it was something to do with the motherboard hwoever I am not sure since there isn't many problems like this on the internet where I could find a solution. I looked in the manual and the closest thing I could find was that it was a PSU or PSU cable problem. If anyone has a solution or answer for this I would be very grateful. The T3500 currently has a Nvidia GTX 260 installed with 4GB of ram. In addition if it is a PSU problem could you please list what PSU are compatible with the T3500 such as a T5500 PSU or a T7400. Thank you for your support.

    I hope your machine is still under warranty :)  I've had this happen to 5 of my T3500s.  The fix is a new power supply.  Each time they've sent out the power supply, they've also sent out a new motherboard.  I think there's obviously a big problem with the power supplies in these T3500s, as each one from our initial purchase has had the same issue (we have a bunch of newer ones that haven't shown the problem, at least not yet).
    Each time it happens I request that the tech person try to make this a known issue (and perhaps trigger some kind of extended warranty/recall), but so far no progress there....
    Leaving it unplugged for a bit seems to fix it temporarily, but then we're scared to turn the machines back off.

  • HT1178 My Time Capsule is only blinking amber. My computer tried to backup but I don't know how to tell if it did in fact back up the data. How can I tell if it backed up and why doesn't the light show green?

    Just purchased a Time Capsule. Had to call Comcast to disable the WIFI and have internet connection. The time capsule though blinks amber and the Airport Utility shows blinking amber light and has a red circle with the number 1 in it. After connecting, my computer tried doing a backup for the first time and it appeared that it was backing up and finished although I don't know how to check to make sure that it did backup. How do I check and shouldn't the light on the time capsule be blinking green and the airport utility show green?

    TM will show it has done a backup.. Look at the info.. when was the backup completed??
    If you want more details install the widget.
    A1 here.
    http://pondini.org/TM/Troubleshooting.html
    The time capsule though blinks amber and the Airport Utility shows blinking amber light and has a red circle with the number 1 in it.
    There is an error.. probably trivial.. firmware update, default password..
    Open the airport utility and find out what the error is.
    Simply click the TC and see status in the summary page.. it will list all the errors and what you should do.. fix or ignore them. ie this TC has an error.. default password.. I chose to ignore.. when I "fix" the problem the LED goes green.
    Here is additional TC.. it is blinking amber with faults.
    Click the fault. eg default password.
    You can ignore or edit .. if you click edit it will take you to the full setup where you can change the settings.
    I ignored my errors and now it is green..

  • Airport Express 801.11b/g and the neverending, unconfigurable blinking amber light

    Gather round and let me tell you a tale. Once upon a time I bought an airport express 801.11b/g and I was very happy to use it for airtunes, extending a wi-fi network and the wireless printing capabilities. One day, it beagn flashing a scaaaary amber light. The base station stopped showing up in my airport utility 5.6 as well. The only way to get it to show up, was to hard reset it, and lose all the configurations I once enjoyed happily. After the hard reset, It would show up in the utility, and I would reconfigure it to do all its cool things it once did, and it would restart. But sadly, after restarting the blinking amber light came on a again. It would also not show up in the utility unless I hard reset it again, and the same thing happened over and over and over until I felt like pulling my hair out.
    I decided to get another airport express a few months later, ultimately deciding that the unit must have just been defective. Bad luck. But - the second unit literally went through the SAME EXACT THING. Worked for a while, then onto the blinking amber light- hard reset- reconfigure-blinking amber light thing. Over and over and over. Just like the first one. The end.
    So - either Im missing something totally fundamental or I had the misfortune of getting two defective units in a row. Both were bought used from different places, and worked "fine" for previous owners. Am I corrupting these things or what?
    I have spent literally hours trying all the resets, configuring "workarounds" and nothing works. For both of them.
    What do I do with these two devices? I don't need two shiny white paperweights.
    Please advise,
    Thanks.

    Yes. It seems an integral part of the set up process though, you don't have to seperately configure the airport do you?
    My wireless security is WPA/WPA2 Personal. When I go through the standard network set up, it automatically enters my wireless security settings. So it doesn't really seem to give an option to specifically set that option on the airport if that makes sense?
    I did go through maunual mode to try that with the same result:
    If I'm using the airports own network and connect to the wifi, no security, then I'm getting airtunes from my macbook. Of course this means it's plugged into my router via ethernet which isn't any use to me as I want it in my kitchen, and would rather not limit my apple devices to b/g when I have a decent N router, and would also mean running a huge ethernet cable across my house!
    The seller has said it worked for him but he's not up to scratch on his tech, so if I'm sure it's malfunctioning he'll refund. Obviously this is great news and he seems like a very nice guy so I want to be certain it's not me malfunctioning before I send it back!
    So in summary I have it functioning on it's OWN network:
    Wireless mode: Create a wireless network
    Wireless network name: Apple Network XXXXXX
    etc
    Once 'wireless mode' is switched from 'create a wireless network' to 'join a wireless network' I select my current WiFi, security and password, checked the TCP/IP settings all good. Select 'Update'. Get the warning that device and network will be temporarily unavailable am I sure I want to continue. Then it goes through the same as before, says it's succesful, restarts to flashing amber with no way of accessing it unless I hard reset.
    Thanks for the help so far...

Maybe you are looking for

  • Question about finding whether a reference number is NOT in the database?

    Hello, I use the following code to test whether the reference number is in the database <ul><li>CURSOR cur_yellow</li></ul> <ul><li>IS SELECT</li></ul> <ul><li>REFERENCE_NO,</li></ul> <ul><li>COMPANY_NAME</li></ul> <ul><li>FROM CONSULTANTS;</li></ul>

  • Received error when using Execute_Immediate proc in Oracle 8.0

    Hi, I was trying to use the execute_immediate proc (slightly revised, for testing). When I run it with a 'Delete' statement in it (or passed in), it works fine. But, when I use an 'Update' or 'Insert' statement in it, I get the error below, even thou

  • Non destructive crop preserved when you "Edit in Photoshop"

    I hope that there would be an option in the future to crop an image in lightroom, then when you open to "edit in photoshop" the image would be cropped using photoshop new non destructive crop. So that i can tweak color and retouch the whole image the

  • Help w Adobe Reader not installing

    Hey everyone, I'm looking to get some insight on why my Adobe Reader will not install anymore on my Macbook Pro, 2013 Retina Display, utilizing Mavericks OS. I recently uninstalled Adobe Reader, disliking the fact that since I had installed the progr

  • Publish to Mac App Store

    Is it possible to publish a Director Project/movie to Mac App Store? I know it is possible to publish to iOs, but what about Mac's Regards Henning