Service order confirmation email and fax

Hi all,
I am looking for how to send emails or faxes when a service order is confirmed? Can anyone please help me do that?
I understand that SMTP service should be enabled & SAP Connect should be configured but how to trigger the email on Service order confirmation?
For Sending Fax do we need to have Fax software or we can use SMTP to send Fax? For using SMTP-Fax scenario what will be required?
thanks,
LSP

Hi,
Set up an Action to trigger upon save that is linked to the relevant SMARTFORM. Make sure it is configured as e-mail.
Cheers
Colin.

Similar Messages

  • IPhone 6 Plus Order Confirmation Email and Ship Date???

    Verizon Wireless Customer Support ,
    I pre-ordered the iPhone 6 plus on 9/12/14. I have yet to receive an order confirmation email and I have had 3 different CSRs tell me via phone three different possible ship dates. Can you please give me some clarity on this situation and possible give me my order information so that I may track it myself??
    Thanks,
    Gena

        I can only imagine how anxious you are about your pre-order.
    I would love to check on it for you since you never received the confirmation email,glmoore08.
    Once we get the order confirmation number, you can check the order status here http://bit.ly/RjmCUB.
    Please look out for a direct message from me.
    TamaraH_VZW
    Follow us on Twitter @VZWSupport

  • Changed Purchase order triggering Email and Fax to vendor

    Hello,
    Ecc6.0 srm3.0.
    a changed purchase order triggering email to vendor, although in the table BBPD_PO_METAOUT all the fields are unchecked and we donu2019t have customization in the table BBPD_COMP_FIELDS,
    Please suggest, we donu2019t want email of fax to be triggered when we amend the purchase order,
    Thanks for reply.
    jairaj

    When we change vendor text, It is SAP std that mail will triger to vendor

  • Link between Service Order / Confirmation in CRM and Purchase Order in ECC

    Hi all,
    Does anyone knows what the possible link is between a Service Order / Service Order Confirmation in CRM and a Purchase Order in ECC ? I heard that this could be found somewhere in the document flow of a Service Order ....
    How do we get the Purchase Order number from ECC in the Document flow section of an Service Order in CRM ?
    We need the PO number somehow to be able to create a Goods Received document in ECC from CRM.
    BR,
    Abjuh

    Hello Abjuh,
    As of CRM 4.0 (with Service Industry extensions), you can automatically create ECC Purchase Orders from a CRM service order.
    It is possible to track the status of the individual service order items with the document flow.
    Please refer to the SAP Help for more information.
    http://help.sap.com/saphelp_crm70/helpdata/EN/46/8bae7e9e886160e10000000a1553f7/frameset.htm
    Kind regards,
    Kristoff.

  • No order confirmation email / no items in order staus,

    I placed an order this morning have not received confirmation email yet. I cannot see any items in the order status, either. Could you check if the order has processed? Thank you.

    Hi there hyongju, 
    Welcome to the forum and thank you for shopping with us! When placing any order, receiving an order confirmation is crucial in your reassurance that your order has been received and is being processed. I'm truly sorry you may not have yet received an order confirmation for a recent order, and if this has caused you any concern. 
    Due to some maintenance on BestBuy.com last night, some order confirmation emails were delayed. We do fully expect these confirmation emails to push through our systems this afternoon. With that said, I was unable to locate your order in our systems, so I would like to look further into this. You may check your private messages by signing into the forum then clicking the envelope icon in the top right corner of the page. 
    Sincerely, 

  • BAPI for Service Orders Confirmation

    Can somebody please provide BAPIS for Service Orders Confirmation and other related BAPIS
    Thank you

    To create service confirm order use "BAPI_BUSPROCESSND_CREATEMULTI".
    Regards,
    Animesh

  • Service Order Confirmation vs. First Bill

    I received a service order confirmation on 6/18.  The order listed my Internet service as being $24.99 per month and a $50 deposit.  I didn't receive my first bill until on 7/19 and now the monthly price was $19.99 covering service from 7/9 to 8/8.  Why was I charged $24.99 for 3 weeks of service? I installed everything myself and didn't use a Comcast modem. Does the service order confirmation even confirm payment or just the fact that I ordered the service?  If someone could clear this up for me, I would be very appreciative. 

    @internetuser3
    I am sorry for the delay. I have sent you a private message to assist you further.

  • Service order confirmation in status "Completed To be Distributed"

    All,
    I have created a service order confirmation based on service order and it is in status "Completed To be Distributed" for a long time. It is not being distributed to ECC system also. Could you please let me know how to make it "successfully distributed".
    Thanks,
    Jenibalet S

    Thanks for your reply, The executive service employee is present in ECC and when I reprocess the bdoc in SMW01 the service confirmation get the status "Contains Error Distribution Incorrect" and it is showing the following error " An error has occured in the system HT3CLNT200 while copying the document".
    Moreover in SMMW01 I have forund the following error messages
    Function module COM_KOSTENSET_GET does not exist
    No mini-template types could be determined
    Could you please help more on this?.
    Thanks,
    Jenibalet S
    Edited by: Jenibalet S on Jul 15, 2009 5:55 PM

  • Status in Service Order Confirmation-relevant items

    Hi SDNs,
    When I create a confirmation follow-up from a service order / repair order/ etc, an set it to completed, relevant items in order keep in released status. Shouldn't they get completed too?
    thanks
    Pablo

    Hi Pablo,
    As of now standard SAP Service Order Confirmation status completion will not change the status of the preceding Service Order. But the customers can call and implement this scenario using the BadI : ORDER_SAVE which gets called after every Save. I feel that customers can hook their business specific logic here and thus can control the Status Management. Status of Service Confirmation is very important as it triggers the subsequent processes like Billing and Delivery.
    Do you have such scenario where you need to change the preceding document? It would be great if you can share it in the forum.
    Hope this helps.
    Thanks,
    Samantak.
    Service Confirmation - Status
    http://help.sap.com/saphelp_crm70/helpdata/en/0a/4d88ef587649f4a9d16bf34c487fe6/frameset.htm

  • No order confirmation email

    I just order from best buy and it shows up in my recent orders but I have not yet received a confirmation email, I have checked spam folder and it's not there either. I placed a previous order today which I got the confirmation email for instantly. Is my order successfully placed?

    Hello cbatra507,
    I can understand your concern if you placed an order, but didn’t receive an order confirmation email. To clarify, some of our emails became slightly delayed, including the order confirmation emails. I apologize for any worry this may have caused you!
    If you haven’t recently checked, please feel welcome to check your email inbox as well as spam folders for an order confirmation email. If you haven’t received one, you may also check your Order History after logging into BestBuy.com to ensure your order was placed successfully.
    If you should need further assistance, please let me know!
    Sincerely,
    Tasha|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Service order confirmation BAPI

    what is the BAPI for service order confirmation (IW42)? I need a BAPI which takes import parameter as Service order number and exports the details of all operations for that order.
    Also, all the materials and quantity used for each operation.
    Are there any BAPI(s) which provides this functionality?
    <b><REMOVED BY MODERATOR></b>
    Message was edited by:
            Alvaro Tejada Galindo

    HI dido...
    you can use CRM_ORDER_MAINTAIN.
    you can process any document type you want
    regards
    Marco

  • Service Order, Confirmation, Follow up

    Hi All,
    Service Order, Confirmation, Follow up... can someone breif me about these terms
    Thanks, Sudeep..

    Service Order Management Process goes like this..
    1. Service Quotation - where a quotation will be created with Product (Installed Base) and SLA-Service Level Agreement (ex: Onsite repair or Inhouse repair). Quoatation will be sent to Customer.
    2. Service Order - Once Customer agrees for Quotation Service Order will be created with ref to Quotation.
    3. You Assign Service Items to Service Employees for repair.
    4. Service Confirmation - Service Employee will visit Customer Location to repair the Service Items and later creates a service confirmation document.
    5. Service Order Invoice - will be create based on Time and Material Data.
    Thanks & Regards,
    Shashikanth

  • Email and fax a form

    Hi ,
           how can we send a form output as email and fax ? How to do the config for this? Can you explain the process to be done?
    Rama.

    Hi,
    See following code :
    REPORT zmail_att NO STANDARD PAGE HEADING LINE-SIZE 200.
    DATA : BEGIN OF ITAB OCCURS 0,
    PERNR LIKE PA0001-PERNR,
    ENAME LIKE PA0001-ENAME,
    END OF ITAB.
    DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
    receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
    packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
    listobject LIKE abaplist OCCURS 10,
    compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
    w_object_hd_change LIKE sood1,
    compressed_size LIKE sy-index.
    START-OF-SELECTION.
    SELECT PERNR ENAME
    INTO CORRESPONDING FIELDS OF TABLE ITAB
    FROM PA0001
    WHERE PERNR < 50.
    LOOP AT ITAB.
    WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
    SY-VLINE.
    ENDLOOP.
    Receivers
    receiver_list-recextnam = 'XXXXX@X...'. --> EMAIL ADDRESS
    RECEIVER_list-RECESC = 'E'. "<-
    RECEIVER_list-SNDART = 'INT'."<-
    RECEIVER_list-SNDPRI = '1'."<-
    APPEND receiver_list.
    General data
    w_object_hd_change-objla = sy-langu.
    w_object_hd_change-objnam = 'Object name'.
    w_object_hd_change-objsns = 'P'.
    Mail subject
    w_object_hd_change-objdes = 'Message subject'.
    Mail body
    APPEND 'Message content' TO message_content.
    Attachment
    CALL FUNCTION 'SAVE_LIST'
    EXPORTING
    list_index = '0'
    TABLES
    listobject = listobject.
    CALL FUNCTION 'TABLE_COMPRESS'
    IMPORTING
    compressed_size = compressed_size
    TABLES
    in = listobject
    out = compressed_attachment.
    DESCRIBE TABLE compressed_attachment.
    CLEAR packing_list.
    packing_list-transf_bin = 'X'.
    packing_list-head_start = 0.
    packing_list-head_num = 0.
    packing_list-body_start = 1.
    packing_list-body_num = sy-tfill.
    packing_list-objtp = 'ALI'.
    packing_list-objnam = 'Object name'.
    packing_list-objdes = 'Attachment description'.
    packing_list-objlen = compressed_size.
    APPEND packing_list.
    CALL FUNCTION 'SO_OBJECT_SEND'
    EXPORTING
    object_hd_change = w_object_hd_change
    object_type = 'RAW'
    owner = sy-uname
    TABLES
    objcont = message_content
    receivers = receiver_list
    packing_list = packing_list
    att_cont = compressed_attachment.
    Reward points if helpful.
    Regards.
    Srikanta Gope

  • Service Order Planned Costs and Cost Center Planned Line Items

    Experts,
    I am curious of Service Order Planned costs, and whether or not these planned costs are being posted to the Cost Center linked to the Service Order Operation's work center.
    I am a but puzzled as I don't see any planned costs from any Service Order Operation in a cost center linked to the Operations work center, when reviewing "Cost Centers: Plan Line Items" report.
    BR,
    Cenk

    The planned costs were input in one of the Service Order operations as planned hours. There is a column for it in the operations list. The amount of hours have incurred a planned cost on the Service Order header.
    I simply assumed that this cost would be credited to the Cost Center linked to the operation's Work Center. But that is obviously not the case. I am not familiar with the PLICC field and the functionality it provides.
    Thanks!

  • SAPScript to email and fax

    Hi guys,
    We want to end the sapscript thru email and fax. Can you help us how we can do that?
    The sequence should be, the sapscript will first be converted to PDF file before ending thru mail.
    Thanks a lot for all the help.
    Rgds,
    Mark

    Thanks Eswar,
    I am already successful with my pdf file,,, I am not sure what would I introduce to 'SO_DOCUMENT_SEND_API1' parameters for it to be successful...
    I have the sample code below:
    data: i_otfdata type STANDARD TABLE OF itcoo WITH HEADER LINE,
          i_pdfdata TYPE STANDARD TABLE OF tline WITH HEADER LINE,
          i_itcpp TYPE STANDARD TABLE OF itcpp WITH HEADER LINE.
    data: i_docs type STANDARD TABLE OF docs WITH HEADER LINE,
          v_len type i.
    CALL FUNCTION 'CLOSE_FORM'
       IMPORTING
         RESULT = i_itcpp
        TABLES
          otfdata = i_otfdata
        EXCEPTIONS
          unopened = 1
          OTHERS   = 2.
    CALL FUNCTION 'CONVERT_OTF_2_PDF'
       EXPORTING
         USE_OTF_MC_CMD               = 'X'
        ARCHIVE_INDEX                =
       IMPORTING
         BIN_FILESIZE                 = v_len
        TABLES
          otf                          = i_otfdata
          doctab_archive               = i_docs
          lines                        = i_pdfdata
       EXCEPTIONS
         ERR_CONV_NOT_POSSIBLE        = 1
         ERR_OTF_MC_NOENDMARKER       = 2
         OTHERS                       = 3
    CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
        EXPORTING
          document_data                    =
        PUT_IN_OUTBOX                    = ' '
        SENDER_ADDRESS                   = SY-UNAME
        SENDER_ADDRESS_TYPE              = 'B'
        COMMIT_WORK                      = ' '
      IMPORTING
        SENT_TO_ALL                      =
        NEW_OBJECT_ID                    =
        SENDER_ID                        =
        tables
          packing_list                     =
        OBJECT_HEADER                    =
        CONTENTS_BIN                     =
        CONTENTS_TXT                     =
        CONTENTS_HEX                     =
        OBJECT_PARA                      =
        OBJECT_PARB                      =
          receivers                        =
       EXCEPTIONS
         TOO_MANY_RECEIVERS               = 1
         DOCUMENT_NOT_SENT                = 2
         DOCUMENT_TYPE_NOT_EXIST          = 3
         OPERATION_NO_AUTHORIZATION       = 4
         PARAMETER_ERROR                  = 5
         X_ERROR                          = 6
         ENQUEUE_ERROR                    = 7
         OTHERS                           = 8

Maybe you are looking for

  • Error when querying OLAP data with BI answers

    Have been doing all the Lessons in "Using Oracle OLAP With Oracle BI Enterprise Edition 10g Release 3". Got till lesson 3 where I'm supposed to query the data with Answers but If I add any of the facts to the report, I get the following error: Odbc d

  • Imac does not turn off.

    hello, I have an imac, running on os x lion. u know how, when you click on shutdown, it shows the white screen. sometimes my imac does not turn off and keep showing it. could you please tell me what i can do to solve this problem. thanks

  • When i try installing ios 8.1.2 an error occurred installing ios 8.1.2

    So the overall reason for this is because i cant install ios 8.1.2 help plz

  • Finding table-name from a DSN name

    i need to find the total number and names of tables from a DSN setup on an access DB. can u tell me how? I couldn't find it in JDBC tutorial .. Thanx

  • Address Book doesn't launch after OS Upgrade

    After upgrading from Jaguar OS 10.2.8 to Panther OS 10.3, I had a problem with my Mac which I've now resolved by performing an 'Archive Installation' of 10.3. I've run Sofware Update so I'm now running 10.3.9. Everything seems to work fine now apart