Service Order not replicated in R3

Hello Gurus;
Here's my scenario, i need a service order to be created in CRM and replicate in R3, i have no problem with the sales item but some struggle with the service item.
I know that standard CRM wouldn't allow me to replicated object type BUS2000140 in ECC but BUS2000140 is the only object type that allow me to have it relevant for resource planning which i need in my scenario. I tried with BUS2000146 and works perfectly in the replication bid but doesn't work for me because i can not make it relevant for resource planning.
Is there any possible way i can make BUS2000140 fly through or any other object type i can use to have the service order relevant for resource planning??
Looking forward to hearing from you guys
Edited by: F. Rocca on May 28, 2010 12:20 AM

Hello Rocca,
It is hard coded in FM CRM_SALESDOCUMENT_FILTER that the item which is assigned to object type BUS2000140 would be removed from the upload relevant item list.
To get it replicated, I am afraid that you need to modify the relevant coding here.
Best regards,
Maggie

Similar Messages

Pricing procedure picked up from the service order not from the contract

Hello, All
I am working on CRM 5.0 service order and service contract,
While creating a service order a popup screen shows that there is a contract which should be assigned, after assigning the contract an error message appears showing that a condition type is missing, the missing condition type is in the pricing procedure of the service order not in pricing procedure of the service contract
Note: I set the copy control for the item category to copy all the condition
Regards
Jacopo François

Hi Jacopo,
Please check your pricing procedure settings and check for mandatory pricing condition.
Secondly, check the pricing agreement in the contract.
Best Regards,
Pratik Patel.
Reward with points if it is of any help to you!

Line Items in Sales Order not Replicated

Hi
1. We created an order in CRM with 10 line items ( all are same service items) and this order is replicated to R/3.
2. We added to the same order 5 more same line items and saved but thid items are not replicted.
Please suugest me how to trance it.
Thanks and Regards
Masthan

Hi,
As per my knowledge is if in case u want to create or add
new line items. use CRMD_ORDER and next open the
business transaction and enter the particular Transaction
number. And next go to the products tab and add the new
products and maintain conditions and prices etc., next save.
you will get New Transaction Number.
Then after XI people will give the IDOC number. then after
you use transacation code(we19 or we39) and enter u will get
new screen display. Here you can enter the IDOC number then
execute. You will get Line Numbers.
ok

Business Object "Service Order" not found in Web Service Tool

Dear Experts,
We're trying to create a web service for Service Order via Web Service Tool,
but we can't find the business object "Service Order" there.
How to step to reproduce the problem:
1. Logon CRM WEBUI with the business role ITSERVICEPRO.
(or T-cd:BSP_WD_CMPWB > Enter component WS_DESIGN_TOOL > Test)
2. Go to Service Operations>Web Service
3. Create a new Web Service
-> In "Service Objects" area at step 1 "Select Objects", there's a drop down list box of "Business Object".
In this list, "Service Order" does not exist.
Other objects such as "Service Confirmation", "Service Order Quotation" etc are available.
How can we create a new web service for Service Order?
Any advise would be highly apprecaited.
Best regards,
F.T.

Hello Rocca,
It is hard coded in FM CRM_SALESDOCUMENT_FILTER that the item which is assigned to object type BUS2000140 would be removed from the upload relevant item list.
To get it replicated, I am afraid that you need to modify the relevant coding here.
Best regards,
Maggie

Work center change in Service order not happening

Hi Experts,
I am facing a problem when i try to Call a function module in update task where the Function module contains a call to BAPI_ALM_ORDER_MAINTAIN without COMMIT WORK.
This is done in order to update the Work Center while there are changes to the Warranty Status of the Repair Order.
So , i have written the Code in the Userexit_SAVE_Document so that the Update gets done.
But there might be problems when the Repair order does not get saved.
So keeping that scenario in mind, I tried using the Update task Function Module in which i wil lbe calling the BAPI for Changing/Updating the Service order.
BUT , The Change is not getting reflected in the Work centre of the Service order.
Thanks
VIJAYB
Edited by: Rob Burbank on Jun 5, 2009 10:10 AM

Hai experts,
i have found the way to do the work center change in update task method .
I did call the BAPI_ALM_ORDER_MAINTAIN but without using COMMIT since this function module is called in Update task method so whatever is the change being done by that BAPI will be reflected in the Service order once the Update task has been done for that service order.
Thanks and regards,
VIJAYB.

CRM 7.0 Contact person in order not replicated to R/3

Hello all,
I am currently facing issue with contact persons in CRM orders. There are several partners in the CRM order. Standard ones like ship-to party is replicated to R/3; employee roles are also replicated into R/3 within an order; contact persons (no matter if standard or Z) are not replicated from CRM order to R/3. There is neither no error message in BDOC nor in order.
Partners are set correctly for mapping between R/3 and CRM (including Z partners) -
tables CRMPARNR (R/3) and table CRMM_BUT_CONTNO (CRM) checked; GUIDs are there
Users do change these contact persons manually sometimes.
If order changed in ERP - including contact persons adding/changing - all partner roles are transfered to CRM for an order correctly.
Any ideas??
Thanks for your help
Radim

Hello,
there is an important GUID that need to be determine, the contact persons in my case need to selected via partner determination otherwise the partner gets deleted in R/3. The determination is creating the relation to the partner which is transfered to R/3 and can be checked in the BDoc. This has solved the issue

Service Orders not displayed in Web Tools

Hello everyone,
We are creating Service Type Orders within B1 and they are syncing over to Web Tools just fine, however they are not displayed on the Order History page for the user. Is that 'as designed'? I know there is no traditional information that can be displayed about these, but was just curious how these should be viewed if at all within WebTools or if I should create custom development for this. Any thoughts are greatly appreciated. FYI, we are using Web Tools 2007 PL 01.
Thanks,
Kristen

Hi Bryce,
I am talking about orders of type 'Service' versus 'Item'. So, it is just a Service Order, for a dollar amount to a G/L Account, rather than having a list of items. These are shown in the Web Tools tables, but are not displayed to the user. Just curious if they were designed to or not. Please let me know if that makes sense.
Thanks,
Kristen

Service Cofirmation not replicated in Backend system

Hi All,
When we are confirming service good in the SRM browser it is not being replicated in R/3, WS10400010 is being triggered and completed successfully but the data is not replicated in R/3.
I have checked the successful one and it has system status I1017,I1018 but the one which failed to replicate in R/3 has no statuses I1017 and I1018.
Can any one let me know what is the actual problem and what needs to be checked in R/3 whether the data is flowing or not.
Its urgent and every reply is hoghly appreciated.
Regards,
Ravi G

Hi Ravi,
Check in SLG1 & RZ20 (Application Monitors) for any error logs and detailed error description.
Check whether the programme BBP_GET_STATUS_2 is running properly in the back groung or not in the back ground.
In case the IDOC is getting failed check for the reason for failure of the IDOC in back end R/3 using WE05 / WE02 txn.
Please make the desired changes as per the IDOC failure message and reprocess the IDOC.
Hope this will make you clear about the issue. Clarifications are welcome.
Do update us for further help.
Award points for helpful answers.
Rgds,
Teja

Network Service Order not working properly.

In System->Network->Set Service Order I have Thunderbolt Ethernet above Wi-Fi but this order doesn't seem to always be honoured.
Sometimes, it will use Wi-Fi even when TB Ethernet is connected and working.
OS X 10.8.5 on a 15" mid-2012 rMBP
Any ideas why? Known bug?
Annoying when doing things like back-ups as Gigabit Ethernet is faster than 802.11n

OK, after a couple of hours trawling through numerous threads about the TB->Ethernet adaptor I've found the answer. It's not a network problem per se, it's to do with the way network shares bind to network interfaces.
When a share mounts it searches for a network interface using the Service Order. As this is a laptop it invariably uses Wi-Fi as the TBE is usually not available. However, if a higher priority interface later becomes available, the share doesn't re-bind to this, it remains bound to the original interface.
The share will only bind to the new interface if either it is unmounted/remounted or the original interface goes away. So by turning off Wi-Fi it forces it onto the TBE (and Wi-Fi could be turned back on straightaway).
This also explains why, when I deleted the plist file you suggested, it appeared to work at first but this was only because the TBE was connected when I restarted my computer.
I don't know whether this is considered "standard" or "normal" behaviour for a network share or whether it's a bug - or just poor design - by Apple. As a user, i would want network activity to always use the fastest interface available.

Sales orders not replicating to R/3

Hi Experts,
I created a sales order in CRM, and then checked for it in R/3(VA03). In R/3 it states the sales order is not present in the database or is being archived. I checked the Bdoc's. The sales order is strucked in Bdoc's. What are the possible steps to be followed for sales order replication.
Waiting for Valuable Suggestions.
Thank You

The possible things that you should do for sales order replication are :-
1) Pide settings:-Maintain the relevent account groups for BPs
2) The number ranges for sales order should be maintained properly.
3) Item category should be maintained for the products.
4) Partner funcions should be determined properly
5 ) Check that all the fields that you use while creating order in CRM should be mapped at R/3 for replication.
You can also check C-03_BB_configguide for details.
Hope this helps.
Regards
Sanjib

Sales Orders Not Replicating from CRM 2007 to ECC 6.0

I have been able to successfully replicate my Customers from ECC to CRM. When attempting to replicate a Sales Order from CRM into ECC, the BDoc shows as "Confirmed (fully processed)" in SMW01. When I look at the list of receivers, it shows my ECC system, with a state of "Processed". However, when I look at the Error Segments on the BDoc, I have two events:
1. No Upload into R/3
2. R/3 Adapter is Called
Any thoughts on what I am missing?
Thanks!

MCG,
Thanks for the quick reply. Yes, I have a publication of "All Business Transactions (MESG)" with a subscription of my ECC system. The BDocs never make it into the Outbound queue. I purposely stopped the outbound queue to see if it would show-up ... it never comes in.
Thanks!

Service Order and Sales Order Integration

Hi All,
Through the requirement class settings in customizing, I have managed to generate a service order in the background upon creation of sales order.
To achieve this I have maintained the following settings:
Order type = OR
Sales document item category TAD
- Item Cat TAD is linked to Requirements Type SERA (SD IMG->Determination Of Requirement Types Using Transaction)
-- Requirements Type SERA is linked to Requirements Class 203 (SD IMG->Define Requirements Types)
--- Requirements Class 203 is lined to order type SM01 (SD IMG->Define Requirements Classes)
I have also maintained my service material 'ZPBK001' in OISD screen. So, system allows me to create a sales order for this service material and service order is generated in the background.
However, my requirement is to not to generate service order in the background but just create a sales order. Then manually create a service order and also manually enter the sales order as an SDI settlement object in the service order.
So to achieve this, if I remove the service material from OISD screen, then system doesn't generates service order in the background but gives an Information (not an error or warning) message saying:
No entry for plant 1200, service object 01 ZPBK001 in table T399A
Its only an information message and when I tick it as ok then system gives another information mesage saying:
Error when processing Service order
So the result is service order is not generated in the background which is fine as per my requirement because I can manually create a service order and then manually enter the sales order in the service order.
However, during the creation of sales order, is there a way that I dont get these information messages regarding service order not being generated in the background?

Hi Pete,
Thank you for your reply. As per your suggestion I have removed the "Transfer of requirements" check from SD IMG->Define Requirements Classes. However, when I create a sales order, system still gives me the pop-up Information message saying:
No entry for plant 1200, service object 01 ZPBK001 in table T399A which is because I have not maintained service material in OISD screen.
Also, I get the information message as:
Error when processing Service order
The first information message regarding service material is ok. However, is there a setting that I can maintain that I dont get the second message regarding error when processing service order?
I also checked item category details in VOV7, there is no settings for transfer of requirements in vov7

Problem with MIGO goods issue to a Service Order

Hello All
I have checked through out the forum as well as google and can not find the answer to my issue. Please read the below details and advise....
In MIGO; when trying to perform a goods issue to a service order (created in IW31) I get an error message the document does not contain any selectable items. I can not get passed this. When I use the transaction MB11, it works just fine. I went to the allowed transactions in OMJJ to ensure MIGO was listed as an allowed transaction... and MIGO is listed so I know that is not my issue. It is not related to the service order not being released as it is and plus if it was not released it would not work in MB11. I need this to work for the transaction MIGO....Please someone guide me in the proper direction of what is missing.

Hi Kimberly,
When you post the goods issue as an unplanned goods movement against the order, the reservation is not even read, so it is never updated.
The data that you enter manually in this unplanned goods issue does not even need to match with the data in the reservation: the material, the plant... evrything can be different. The order is just a CO Account Assignment in this case and the reservation is not processed in any moment. This way, it is not possible to close the reservation when posting this kind of unplanned goods issue, as the reservation is not even considered (and, therefore, never updated).
It is only when you post the planned goods issue referencing the order directly when you really post your goods issue with reference to the reservation behind the order. Only in this case is when the data in the posting is checked against the reservation (the material, the plant, etc cannot be changed because they are taken directly from the reservation). Also, it is only in this case when the quantity in the posting is checked against the quantity in the reservation. If we issue the total reserved quantity, the reservation is closed automatically.
In the first case for the unplanned goods issue there is never an automatic update of the reservation because the posting does not even consider the reservation. It is only when you post the goods movement with reference to the order (in MB1A using "To Order..." and in MIGO "Goods Issue + Order") when the reservation is taken into account in the goods movement and, therefore, updated.
You can also refer to the SAP Library:
[http://help.sap.com/saphelp_erp2005/helpdata/en/a5/6337db43a211d189410000e829fbbd/frameset.htm]
It says:
"This withdrawal is unplanned because there is no reservation to be referenced."
An unplanned goods issue with the movement 261 and the order (working as CO account assignment object) is more or less the same as a 201 for a cost center. The cost center and the order are just CO Objects in this scenario.
I hope this helps you further!
Best regards,
Esther.

Replication of service order

We have created a service order in CRM. Normally we replicate it to R/3 as sales order.Is it possible to replicate it as service order??.If yes, what are the settings do we have to maintain in CRM / R/3??
regards,
Anirban

Hi Anirban,
You have mentioned that service orders are replicated to R/3 as sales order. what were the settings done in admin console (txn - smoeac) . Did you subscribe alone "BUS_TRANS_MSG" or did you specify any service related stuff.
Greatly appreciate in advance for the help.
thanks
Jothi.

Service order replication with Spare parts( Item category SRVM) to R/3

Hi Experts,
We are creating service order in CRM with spare parts details(Item category SRVM) and this service order has to replicate to backend R/3.
As per my knowledge Service orders are replicated as Sales orders in R/3 with sales items only i.e. SRVS.
My question is Can i replicate the Spare part details( Item Category- SRVM), what i am entering in the CRM service order to the R/3.
Points wil be rewarded.
Thanks in advance.
Nadh.

Hi Pepe,
Thank you for your quick reply.
The status of the item shows "To be distributed" when i try making changes it shows a message
"Document being distributed changes cannot be made"
How to rectify this problem?
Regards
Prathiba

Service Order not replicated in R3

Similar Messages

Maybe you are looking for