Service order operations with different plants

Hi,
We would like to use different plants in our operations for service. This works fine but at certain operations we have set components (with backflush). While processing the service order these components receive the service order planning plant where it should be the plant mentioned in the operation.
The reason why we would like to use different plants is because the material that has to be repaired will pass through those different plants. (or should we just create multiple service orders ?)
Example :
Task list created in plant 001 :
Operation A plant 001 with component Y
Operation B plant 002 with component Z
The service order is created in planning plant 001 and when you go to the component tab, the plants of component y and z are set to plant 001 where it should be component Y --> plant 001 and component Z --> plant 002.
Is setting the plant for components equal to the planning plant, standard behaviour ? (can't find anything to change this)
Do i have to achieve this with a user exit ?
with regards

Hi dear,
In that Case : u can create a single delivery...... AS the ccriteria for delivery split as per standard are
1. ship-to-party
2. shpping point
3. route
4. incoterms
5. transportation zone
Thanks,
Raja

Similar Messages

  • Is it possible to create Order type with different number ranges-Plant wise

    Hi Experts
    Client wants to get the different number ranges for the order types created in the different plants. Is there any user exit for the same.
    I have assigned the order type to the different plants. And Order type is assigned to a no range. So whenever a order type is created in different plants; order types uses the same number ranges.
    so with this situation one cann't know the total no. of order created within a plant.
    Is there any solution for the same.
    Pease give your valuable solutions.
    Regards
    Pankaj

    Hi
    Best way is to create different order types for different plants.
    like we have order types OR15 ,OR20 & OR30 for different plants 1500 ,2000 & 3000 .
    you can assign different number range for different order type.
    this is simplest solution.
    Regards
    Sujit

  • Can we give 2 materials existing with different plants in 1 Sales order

    can we give 2 materials with different plants in 1 Sales order

    Hi dear,
    In that Case : u can create a single delivery...... AS the ccriteria for delivery split as per standard are
    1. ship-to-party
    2. shpping point
    3. route
    4. incoterms
    5. transportation zone
    Thanks,
    Raja

  • Is it possible to print service order directly with PDF formular?

    does anybody know:
    is it possible to print service order directly with PDF formular?
    i don't mean to use the SE38 calling PRG RSTXPDFT4 to transfer SAP sript into PDF.
    thanks
    RD

    Not possible directly..
    But you can call this tranzaction to convert to PDF  & print. For this you need development

  • Make-to-Order with Different Plant

    Hi Experts,
    I'd like to know how to implement business scenario of make-to-order but delivering plant (in Sales Order) is different with manufacturing plant (in Process Order). My client has material locking problem (huge batch records) so that my client wants to create new plant for delivering plant in order to minimize material locking problem. Is this scenario possible?
    I have set parameter 'Share Lock' but it does not work to solve material locking problem. Batch level is set in material level.
    Hope anyone can give me tricks or experience.
    Best regards,
    Heydarul Humam

    Hi,
         In OID2 -> In Application area O , For same order type assign different shop papers ..,
         After doing config in OID2 , In Application area O , these shop papers wil be be avaialble for assigning to planning plant, planner group in OID3 .. , here assign each of these shop papers to different planning plant ..,
    Now in IW32 system checks combination of order type to planning plant and defaults shop papers while printing ..
    Note :-  Here , If a particular shop paper is not assigned to an order type in OID2 , then u cannot default in printing via IW32 .for that order type and any planning plant ..
    check it up
    regrds
    pushpa

  • IW31 Service Order created with reference order,sold to party not populated

    Hello
    If one decides to create a new service order with IW31 but based on an old one using reference order field, not all data's are popullated to the new document:
    It works for some data's like :
    - operations
    - components
    It does not work for the following data's:
    - service order description
    - sold to party
    - main workcenter
    Does someone know if it is possible in the customizing to determine "copy rules"  in order popullating values from the reference document to the new?
    Is it a bug or a SAP standard behaviour?
    Kind regards
    Chris

    Hello,
    The behaviour you have described is correct - Description, partners, main work center are not copied from reference order. See note 197581.
    -Paul

  • How to maintain one vendor with differant plants at differant states.

    Dear All,
    i have one scenario with me in that my client purchasing his goods from one vendor that vendor is having two plants one at mumbai & one at gujarat. Now how i will maintain these two address with the same vendor. Along with that i need to mainatin the tax structure for both in one vendor. While creating purchase order how buyer will pick the tax structure.
    Regards,
    Nandkishor Nachane

    Hi,
      You can create one main vendor code and use partne function to add address of different plant location.
    regards,
    zafar

  • BOM line item with different plant than header item.

    Hi friends,
    Can we have different plants for BOM child items?
    For example,BOM is created for plant 1000 with 5 sub items. when sales order is created BOM expodes with 5 sub items with plant 1000 because BOM is maintained for plant 1000.
    do we make any settings that line item should pick other than plant 1000?
    Please let me know is it possible in standard SAP? if not, how can we acheive it?
    Thanks in advance for your solution.
    Regards,
    Ravinder

    Ravinder Reddy ,
    Scenario 1:
    I have tried this scenario, I am having one header material (plant 1000). I have created one sub material 1100001 of plant (1000) and another material 340771 (Plant 2000) and i have assigned Item Category = N then i entered qty for ist item =1
    it is throwing an error. "Material 340771 not maintained in plant 2000." at sub item level
    Scenario 2:
    In another scenario, if  I am having one header material (plant 2000). I have created one sub material 1100001 of plant (1000) and another material 340771 (Plant 2000) and i have assigned Item Category = N then i entered qty for ist item =1
    It is throwing an error "Material 1100001 not maintained in plant 2000."  at hedaer level
    Scenario 3: I have extended the materials for both the plants
    Here i am entering the material header material 12345 (plant 2000). I have created one sub material 1100001 of plant (1000) and another material 340771 (Plant 2000) and i have assigned Item Category = N then i entered qty for ist item =1
    It is picking up...
    Material has to be extended to the plants that you are using let it be at sub item level or header level. Material has to be extended.
    Regards
    Sathya

  • Service Order - Operations.

    Hi Everyone,
    I have a scenario here where I need your expert advice.
    Make to Order Scenario in PP , where some of the production operations are subcontracted. But here materials will not leave the premises, instead  people from outside will come and do the work (service) on the materials within the shop floor area, like Cleaning Operations.  People who come will work only for some stipulated amount of time and the work will be subcontracted to them.
    During normal subcontracting operations a PR will be created when you create a production order.
    Similarly is it possible to create a Service PR for the above mentioned kind of operations when a production order get created??
    Is it possible to simulate this scenario in standard SAP PP or any configuration changes has to be made??
    Any information in this regard will be very helpful..
    Pavan

    Hi,
    In ur case ,Vendor send people and do the work (service) on the materials /equipment within the shop floor area, like Cleaning Operations. So People will work only for some stipulated amount of time and the work will be subcontracted to them.
    So you can go for Service Order  or Service PO which serve as agrrement with ur vendor .You can cretae Service PR also.Service PO/Service PR is created with item Category "D" and an account assignment category as per ur requirement like "C" or "F". U can not enter ur material here only u have to maintain short text of material. Example: You want to clean the any equipment and u given contract to your Vendor. Vendor sends quotation mentioning that Rs.100/hr/Man head. Now how you will measure the cleaning activities of equipment? You can pay to contractor based on the hourly basis/ man head spent in cleaning activities. So in this case create the Purchase Order mentioning "Cleaning" in the short text in Item overview(Acc assignment ' F' or “C” or “P” and Item category 'D) and item details " Man Head" Service No , Gross price - Rs.100.00 and unit - hour ( or pick from Service master) and Quantity-number of hours spent by all man head. Once you create Service PR then create Service PO w.r.t Service PR
    The steps to create Service PO are:
    1) Maintain Item Category as D & account assignment such as Order“F”or slaes order”C”
    2) Keep material code field blank.
    3) Enter description of service & other fields in the PO Item Overview level. Press Enter.
    4) System will prompt you to maintain services at Item Level. Maintain your service master number / service description & other fields (quantity / rate /)
    5) Save the PO.
    Maintaion the Servive entty sheet(SES) in ML81N w.r.t Service PO.You can cretae "N" number of SES w.r.t to single PO.Then  go for Invioce verifiation MIRO w.r. t. SES and then payment in F-53.
    Regards,
    Biju K

  • Service order settlement with Accounting indicators

    Hello,
    I created a service order and confirmed labor with three different accounting indicators Warranty, contract and Billable. I want to settle costs from warranty line to G/L account 123, Contract line to G/L account 234 and Billable line to Profitability segment.
    Does anyone know how to use result analysis along with accounting indicators to settle costs? Did anyone implemented this process? Any help is appreciated
    Regards

    Resolved

  • BAPI or FM to create Service Order type SM01 in Plant Maintanence

    Hi All,
    Can anyone help me in searching for a BAPI or a function Module to create a Service Order of type SM01(Service Order). This is usually done through transaction IW31. I have written a BDC as of now but it is acting cranky as a lot of things depend on User Settings I wanted to have a generalised way of doing this rather than a BDC.
    Regards,
    Sudhi

    Hi Sudhi,
    There does not seem to be a BAPI available for Service Order Creation (at least in 6.20). One option you can consider is create the order with minimum required fields using BDC and then immediately change it using the Order Maintain BAPI.
    Is your BDC executed as part of a dialog transaction or in background job? If it is always executed in background you should not worry about user settings as you can schedule the job to always run with the same id. The same applies if your data comes in as an idoc.
    Gareth is correct. I did not see the BAPI docu.
    Cheers,
    Ramki Maley.
    Message was edited by: Ramki Maley

  • Restrict access to modify Service Orders operations within IW32

    Hello experts,
    We have a challenge due to our certifications programs. We allow certains users to create services orders and make the selection of the task list via IW31. They also have access to IW32 so that they can release the order later on.
    I am looking for a way to block their capability to modify operations informations (wc, texts, prt,etc). So far I have explored few avenues but I am still not convinced.
    Option 1:
    -use a BADI (WORKORDER_UPDATE) and functions CO_BT* to track detail fields that were changed
    -this involves a good development
    Option 2:
    -use BADI IWO1_ORDER_BADI method AUTHORITY_CHECK_AUART_ACTIVIT
    -I couldn't find authorization object for my need...
    Option 3:
    -a check on changes docs being created or apparently there is a field VBKZ we could use to identify a object change...
    Would you have faced the same requirement?
    Thank you for your time.
    Francois Paquet

    Hi Pete, I am glad to receive an answer from you! Your other answers helped me on some other requirements.
    We have given a try to this badi and as per the documentation it works well to hide information. We will see if we can push other parameters than set invisible because we still want the information to remain visible.
    Thank you.
    Francois P.

  • Different order unit for different plant

    Hi,
    I ahve a material whose base unot of measure is kgs. Its purchase order unit for plant 1000 is Tonnes, and I want to have a different purchase order unit say LBS for plant 1100. Is it possible?
    Please advice.
    Regards,
    Vengal Rao.

    Hi,
    You can maintain different order units for the different plants, since purchase view is at plant level.
    Order unit field is available in the purchase view.
    If required, you can maintain different order unit in the PO/Contracts other then the order unit in the material master record for that material and plant by activating variable order unit in the material master record - purchase view. In this way, you can maintain different order units in the PO for the same material and plant.
    Regrads
    KRK

  • Service Order Operation User exit

    Hi,
    I am looking for user exit to validate operation data in sevice order on entry and while saving.
    I have checked IW01 user exits but enable to find the correct one.

    > Hi,
    >
    > I am looking for user exit to validate operation data
    > in sevice order on entry and while saving.
    >
    > I have checked IW01 user exits but enable to find the
    > correct one.
    Hi,
    This is my first post. I think you can also use function EXIT_SAPLCOIH_009. This is fired on any of maintenance order/service order save event.
    Regards,
    Abhijit

  • Service order replication with Spare parts( Item category SRVM) to R/3

    Hi Experts,
    We are  creating service order in CRM with spare parts details(Item category SRVM) and this service order has to replicate to backend R/3.
    As per my knowledge Service orders are replicated as Sales orders in R/3 with sales items only i.e. SRVS.
    My question is Can i replicate the Spare part details( Item Category- SRVM), what i am entering in the CRM service order to the R/3.
    Points wil be rewarded.
    Thanks in advance.
    Nadh.

    Hi Pepe,
    Thank you for your quick reply.
    The status of the item shows "To be distributed" when i try making changes it shows a message
    "Document being distributed changes cannot be made"
    How to rectify this problem?
    Regards
    Prathiba

Maybe you are looking for

  • What are the best programs for word processing and excel for the iPad

    Was planning to use my iPad for word processing and excel work, what programs are best that would be compatible with Word documents I have on a Wi-Fi drive.

  • Red/Yellow/Green buttons now gray

    Since 'upgrading' to Yosemite, the colored buttons on the upper left are now all gray on the Safari screen.  iTunes buttons are still colored, just not on Safari.  Please note that I am not in full screen mode:  the buttons are there, it's just that

  • UDC infosource set up as Non- Cumulative

    Hi, when I click on Update rules going from UD Connect  3.5 infosource to a DSO, I get the following message: InfoSource ZCSB_REVENUE is only set up for the initial run for non-cumulatives. Message no. RSAU122 Diagnosis This InfoSource is specificall

  • Flash mx 2004 vector graphics

    When I try to import the svgz file that I created in Indesign, Flash MX 2004 says that it does not recognize the file type. I thought Flash used vector graphics for it's images.

  • Bitlocker error on 32 bit Windows 7

    Hello, I recently encrypted an external hard drive using bitlocker. It works fine on the 32 bit version of Windows 7 but whenever I plug it into two other computers I get the following error: E:\ is not accessible. Access is denied. These are 64 bit