Service Order Release

HI Experts,
I am creating a service order automatically froma repair order (sales document), the service order is relaese automativally at the time of creation, this was working perfectly fine but now it is not working, i am not able to figure out what could be the reason why it is not releaseing automativally now.
Pls help - Urgent.
Rgds

Hi to all experts out there!
Further to the problem outlined w.r.t. permits, I have the following issue:
1. PM order status: CRTD (not released yet)
2. Perform planning to accumulate cost within the 1st (or higher) level of permit to be issued.
3. If the user saves the order before release, the system will not allow release before issuing of permit afterwards - INTENTIONAL.
4. However, the system does allow RELEASE of PM order (directly after planning) and then save BEFORE issuing of permit - LOOP HOLE.
In SAP standard I am unable to find a config setting to prevent the situation in point 4.
Any suggestions to resolve the above issue?
Have a great weekend!
Lew.

Similar Messages

  • Production and Service order Release Log updation

    Hi,
    Can any one help me how to update the release log of Production and service order.
    I have a requirements to add new custom logs to the production and service order release process.
    sudha

    As far as I know the standard behaviour is that the PR is created upon order save and not upon the status of the order or items changing to released.
    To get around this you can set user status and use status management to prevent the PR getting created or use the BADI CRM_SRV_FIND_LOG_SC to supress creation of the PR.
    Hope this helps.

  • User exit for Service order release ( needed operation details as import )

    Hi All,
       I need a user-exit while service order release( tcode : IW31 ) activity . I find some of the exits, but none of those not having "Operation" details , all are having only header details. Please suggest if any user-exit is available for this or BADI . I tried with badi "ALM_ME_001_ORDER" , its not triggering at all while creation of service order.
       Is there any way we can get from operation data from buffer, please suggest me the same.
    Thanks in advance,
    Pavan.

    Hi Thomas,
       Thanks for reply. I saw the function exit which you mentioned , but it didn't have the operation details in import.
    Regards,
    Pavan

  • Purchase requisition generated before service order release

    Dear Experts,
    We're testing the Logistics Integration Scenario for the Procurement of materials.
    When we enter a spare parts item(which is configured to create a purchase requisition in ERP)
    and just save the service order,
    the purchase requisition is created in ERP as soon as the order is saved even though the order is not Released.
    Is this a standard behavior?
    We expect that the purchase requisition should not be created until the service order is released.
    This symptom happens not only with purchase requisition scenario but also with the purchase order, reservation, too.
    Does anyone have an information on this? Any information would be highly appreciated.
    Thanks in advance for your help.
    F.T.

    As far as I know the standard behaviour is that the PR is created upon order save and not upon the status of the order or items changing to released.
    To get around this you can set user status and use status management to prevent the PR getting created or use the BADI CRM_SRV_FIND_LOG_SC to supress creation of the PR.
    Hope this helps.

  • Service Order Release Status

    Dear All,
    If a service order of type "SM" is released by mistake is it possible to cancel the Release?
    Thanks in advance
    take care
    Nomi

    Nomi,
    Sorry, its not possible to reset the order back to created (CRTD).
    If necessary, close the old orders and recreate new ones.
    PeteA

  • Service order - Blocked for credit check

    Hello ,
       I have a scenario where the service order will be created with reference to sales order and the credit check is active both for the sales order and the service order.
    we are releasing the sales order from credit block in VKM1 , but still the credit check is not allowing us to release the service order which created with reference to the sales orders .
    Now my doubt is , even after releasing the sales order from credit block , why system is stopping or blocking the service order from release.
    Need your inputs in this

    Hello ,
    Thanks for the reply
    As you said , the credit check in the service order is information message "Credit check (maximum percentage for ope
    exceeded)" .
    If you enter and come out this message then one more message will come , i.e., "The business transaction can not be carried out" detail message -  System status CNOK is active (ORD XXXXXXX).
    with the above message , system will not allow to do the Service order release.
    In this particular case , we have done the VKM1 for the sales order to unblock the order from credit check . But again system is checking the credit check at service order (created w.r.t sales order) . we are not able to control this .
    we also suggested the solution to the customer , saying removal of credit check for service orders . But customer requires credit check to happen at both the documents.

  • Authorization for "Accept Quotation" Business Transaction in Service Order

    Hello All,
    I need of Authorization Control for doing "Accept Quotation" business transaction in Service Order.
    Process goes as follows.
    Service Order created with Planned cost components with DIP Profile
    Service Quotation got created through DP80
    Then, Accept Quotation will be done in Service Order
    Release of Service Order
    Execution, Billing, etc.,
    Here, I want to control of doing "Accept Quotation" by only authorized people.
    I couldn't find any suitable Authorization Object under I_VORG_ORD under field BETRVORG.
    We can control that business transaction through User status. Is there any other standard object available to achieve this??
    Hope I am clear in my query & looking forward your suggestions.
    Thanks in advance.

    Maheswaran KD
    Sorry, but I can't check at this client as we are not using CS processes.
    Try popping into debug mode using "/H" and put a break-point on "authority-check" before continuing.
    The program should now stop at all authorisation checks. See if any of these are suitable.
    If not, then you may need to use a user-exit or BADI.
    PeteA

  • Function module to release a work permit attached to a service order.

    Hi,
    We have a requirement of automating the process of work permit release attached to service order.
    I am looking for a function module / BAPI for releasing the work permit attached to a service order by passing service order number and permit ID/Name.
    If any of you have come accrose such one please share.
    Thanks
    Achuthanandan

    Hello Philip
    The following function modules should be useful:
       - CY_PRIMARY_SELECTION            - Function module for selection of orders for the work center
       - CY_SECONDARY_SELECTION          - Check for additional criteria
       - CR_CAPACITY_AVAILABLE_PERIODS   - Reads the available capacity from work center
       - HR_PERSON_READ_TIME_INFO        - Reads the available capacity from person (modification)
       - CY_GET_PART_CAPACITY            - used only for the first period to read backlog
       - CY_LOAD_DISTRIBUTION            - Distribution key
    Please observe that these are simple function modules, not BAPIs, That means, they were developed to be used on the SAP internal programs and they are not supported by SAP when used in custom programs.
    BR
    Caetano

  • Error while releasing the service order .

    Hi,
    After creating sales order from service order (ZOR3), when I am trying to release the service order by clicking on the green flag it is giving me error 'WBS for the Variant Service Line selected does not exist'.
    Kindly advice a solution.
    regards,
    SDG

    What is the error message number ??  If it starts with "Z", then through some user exit, this control is applied which you have to check with your ABAPer on the coding.
    thanks
    G. Lakshmipathi

  • Service Order - Status Release Reject "RELR"

    HI Experts,
    When i am created a service order from repair order automatically, it is getting created with the status release rejected "RELR", It should be released automatically from the repair order, wich infact was happening but now due to some reason this functionality not working,
    Pls suggest what i should check for the same so that this should work fine
    Urgent !!
    Rgds

    Bharat,
    could you check whther any pemits assigned to the service order or not. The auto release for the ordertype is on, and because of ome reason system is not able to release the order.
    check the Permit, and release it , then try to release it manually.
    Prase

  • Add estimated cost in PM Service order after release of order.

    I have released the PM service order. Now I need to add the estimated cost in service order. . Please tell me a way to do so. I have only released the order and no other transaction has been done.

    ANIMESH KUMAR,
    AS standard you cannot change the estimated cost value after release (REL).
    However, I have seen two work arounds:
    - Copy the field onto the Enhancement tab via user-exit IWO10018
    - A bespoke TCode/program to directly update the AUFK-USER4 field
    PeteA

  • How to reverse service order which is in released state

    Hi,
    Please guide me how can we reverse a service order which is in released state.
    Is it possible to reverse a service order with released state?
    Please guide it is very urgent.
    Thanks and Regards
    Edited by: MPVash Vash on Dec 5, 2008 10:04 AM
    Edited by: MPVash Vash on Dec 5, 2008 10:06 AM

    Hi,
    a delivery suspension due to non-payment can just be released via an incoming payment.
    You could also manually do this be setting the end date of the suspension, but I would not advise that. As I currently do not have system to check I'm not sure whether you could use ISM_SALES_ORDER_CHANGE, but you can try via the where-used list of structure JKSI_SUSPEND which needs to be used in this case.
    Tim

  • Error releasing of Service Order

    Hi Experts,
    Error while releasing service order "System status CNOK is Active" . Please let me know how to release the orders.
    Regards
    Yadu

    Hi Yadu,
       Release the order using IW41.
       Reward points if it helps.
    Regards
    Karan

  • Inspection lot creation when Service order is released

    Hi,
      When i release a service order i need inspection lots to be created automatically.I get a error ''No Insp lot was generated release order anyway''.I have maintained inps type 14 in the maint order type SM03 and inspection type for origin with 'Insp Type 14' and also task list type 'Q'.Any more setting's needed?
    Thanks in advance.

    Amit,
    Please open a new thread for your query.

  • Accounting indicator not able to change after service order is released

    Hi,
    The accounting indicator cannot be changed anymore after a service order is released.
    Does anyone know how to change this setting so that accounting indicator can be changed even after a service order is released?
    Thanks.
    Edited by: SAP INFOUSER on Oct 18, 2010 8:48 PM

    Hi,
    I think you haven't done RA yet?
    If a sales order has something called a Results Analyis Key and has status REL the system tries to settle whats called RA (results analysis also known as WIP). In this case you have not calculated RA but has an RA key and status REL. So technically there is nothing for the system to settle. You should either calculate RA (via KKA3) which he would have to customize or remove the RA Key from the "Account Assignment" tab on the item in VA42.

Maybe you are looking for