Service p.o. not generated
hi gurus,
as i m settling the shipment cost in vi02 system is not automatically generating the p.o. which it should generate ,i belive.
i've done all the configuration settings in img
i m not able to know what triggers automatic p.o. genation may be thaen i could check,
please revert to it a.s.a.p.
thanks in advance
ghnghngh
Similar Messages
-
Reporting Services Cube Parameters not generated automatically
Hi, I have a few reports which display data from an Analysis Services cube.
For example my report uses Dateset1 as the source of the report.
When I modify Dataset1 by adding a new parameters in the Query Designer, a new (hidden) dataset is created called: CustomerAgeCustomerAge.
But a new parameter on the report is not automatically generated. In the Dataset1 - Dataset Properties \ Parameters there is an entry for the parameter which should be created e.g. [@CustomerAgeCustomerAge]. I can work around this but I'd like to find the
cause. Is there a max number of parameters which are generated automatically - my report has 12.Hi darkdusky,
Based on my understanding, when you add a new parameter in dataset query, the parameter doesn’t generate automatically in report parameters.
In Reporting Service, when we define a dataset query that contains a query variable, the query command is parsed. For each query variable, a corresponding dataset parameter and report parameter are created automatically. As we tested in our environment,
even we create thirteen parameters in data set query, corresponding parameters automatically appear both in report parameters and dataset parameters in dataset properties.
So in your scenario, I would like to know how about your query with those parameters. If possible, please provide some screenshots of results before and after you add a new parameter in dataset query.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu -
Provide Webservice link not generating corresponding WSDL URL based on the service operation.
Hi All,
The provide webservice link is not generating corresponding WSDL URL based on Service Operation.
E.g. Currently we have two service operations namely Create and Update. We are using Rowset based messaging. Provide Webservice link generated correct WSDL URL for the create operation but it is providing the same URL for Update operation as well. kindly share your knowledge if you guys ever faced similar problem.
Regards
ViswaHi Hakan,
Thanks for your reply. Actually i am trying to generate WSDL URLs for each service operation for Travel & Expense module like create expense, update expense etc.
URL generated looks like this : http://xxx.xx.xxx.xx:8011/PSIGW/PeopleSoftServiceListeningConnector/HX_TE_EXPENSE_CLAIM.16.wsdl - this url is meant for CREATE operation. But for the UPDATE operation i am getting the same URL . Normally, Whenever i create WSDL URL for different operation the numeric part of the above URL changes like 16, 17 etc ..based on the service operation but no two operation have same URL like i am getting now. Please provide your knowledge on this issue.
Regards
Viswa -
Save service order - billing due list is not generated
Hey,
when i save service order ,the billing due list is not generating.what have to do.
ThanksHi Swati,
Every document will have two types of statuses
1. Header level
2. Item level
Whenever the item is set to Released (Not the Header status) then the billing items get triggered and you will see them in the billing dues list.
and one more prerequisite is you will have to set your item category as Relevant to billing and also have to do the config around that item category
Please let me know if you need more info and award me points if this helps -
Could not generate stub objects for web service invocation in ColdFusion
I was able to call the services on the development box - windows server without any problem at all, everything was working fine but the moment i uploaded to a linux box production server I get this error. "Could not generate stub objects for web service invocation in ColdFusion"
What could be the cause of this problem, i have googled a lot but no solution yet any ideas.Let me make it simple:
1. Server A is our development server.- hosted inhouse with coldfusion installed.
2. Server B is our production server - a linux server with coldfusion installed hosted on the internet
3. Server C is a third party server containing the webservice - this is a windows server with .net
coldfusion is installed on Server A, the code works here and can connect to server C without any problem. It gets the required respone
but when the code was uploaded to server c it gives the error when we run it.
now i tried just a simple code which works fine on server A below:
<cfinvoke webservice="http://www.webservicex.net/CurrencyConvertor.asmx?WSDL" method="ConversionRate" returnvariable="ConversionRateResult">
<cfinvokeargument name="FromCurrency" value="EUR" />
<cfinvokeargument name="ToCurrency" value="USD" />
</cfinvoke>
<cfdump var="#ConversionRateResult#" />
But when i uploaded it to server C: it returns the error
Cannot generate stub objects for web service invocation.
Name: http://www.webservicex.net/CurrencyConvertor.asmx?WSDL. WSDL: http://www.webservicex.net/CurrencyConvertor.asmx?WSDL. java.io.FileNotFoundException: /opt/coldfusion8/stubs/WS728929035/NET/webserviceX/www/Currency.java (No such file or directory) It is recommended that you use a web browser to retrieve and examine the requested WSDL document to ensure it is correct. If the requested WSDL document cannot be retrieved or is dynamically generated, it is likely that the target web service has programming errors.
The error occurred in /home/works/public_html/currency.cfm: line 7
5 : <cfinvokeargument name="FromCurrency" value="EUR" />
6 :
7 : <cfinvokeargument name="ToCurrency" value="USD" />
8 :
9 : </cfinvoke>
Now if you try the preceeding code on a windows environment it works fine but the moment you put in the in the linux environment it generates this error
I feel that the error may actually be :
java.io.FileNotFoundException: /opt/coldfusion8/stubs/WS728929035/NET/webserviceX/www/Currency.java (No such file or directory)
but i am clueless as to what to do next
Ok so I tried the wget command on the linux
this is what i got
-bash-3.2# wget http://www.webservicesx.net/CurrencyConvertor.asmx?WDSL
--2011-07-02 23:23:42-- http://www.webservicesx.net/CurrencyConvertor.asmx?WDSL
Resolving www.webservicesx.net... 216.8.179.25
Connecting to www.webservicesx.net|216.8.179.25|:80... connected.
HTTP request sent, awaiting response... 403 Forbidden
2011-07-02 23:23:43 ERROR 403: Forbidden. -
Report for Material Issued against Service Orders But not Billed.
Hi Experts,
For CRM Service Orders Based on the Reservation number generated in CRM we will make the Goods issue document in ECC.
My Question In CRM Do we have any standard report to see Material issued against CRM Service orders but not billed. i.e. Work in progress.
Thanks in Advance,
AbhineshHi Vivek,
What I wanted to say that you won't get information from VAV about billing since as far as I know it doesn't contain any relevant table.
You should try create a query using LIKP-LIPS-(joint type: left outer)-VBRK. This will connect deliveries to billing document, you can also get SO number. Please try this.
(Sorrowully I don't know which logical database would be good for you)
BR
Csaba -
URGENT*** Test Client testpoint not generated in WebLogic 10.3.0.0
Hi,
I have created very basic "Java EE 1.5 with support for jax-ws Annotations" web service and deploying in to web logic server 10.3.0.0. I am using Jdeveloper 11g for convert my java file to web service and deploying the same in to WLS directly from Jdev IDE.
Problem is, I cant able to see "Test Client" testPoint in order to test my webservice. When I access my web service via WLS admin console can able to see only "?WSDL" test point at TESTING tab and WSDL is accessible. But Test client is not getting generated.
Please help me, what am I missing here, why the WLServer not generating the test client. Am I missing any setting at server side. Please help me. Below is my web service code.
package edu.ws;
import javax.jws.WebService;
*@WebService(serviceName = "demoWS", portName = "demoWSSoapHttpPort")*
public class demoWS
public demoWS()
public String fullName(String fn, String ln)
String fullName = fn + ln;
return fullName;
WSDL file:
*<!--*
Published by JAX-WS RI at http://jax-ws.dev.java.net. RI's version is Oracle JAX-WS 2.1.3-07/10/2008 08:41 PM(bt).
-->
*<!--*
Generated by JAX-WS RI at http://jax-ws.dev.java.net. RI's version is Oracle JAX-WS 2.1.3-07/10/2008 08:41 PM(bt).
-->
*<definitions targetNamespace="http://ws.syu.edu/" name="demoWS">*
*<types>*
*<xsd:schema>*
*<xsd:import namespace="http://ws.syu.edu/" schemaLocation="http://192.168.88.131:7001/DemoWebService-DemoWS-context-root/demoWSSoapHttpPort?xsd=1"/>*
*</xsd:schema>*
*</types>*
*<message name="fullName">*
*<part name="parameters" element="tns:fullName"/>*
*</message>*
*<message name="fullNameResponse">*
*<part name="parameters" element="tns:fullNameResponse"/>*
*</message>*
*<portType name="demoWS">*
*<operation name="fullName">*
*<input message="tns:fullName"/>*
*<output message="tns:fullNameResponse"/>*
*</operation>*
*</portType>*
*<binding name="demoWSSoapHttpPortBinding" type="tns:demoWS">*
*<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>*
*<operation name="fullName">*
*<soap:operation soapAction=""/>*
*<input>*
*<soap:body use="literal"/>*
*</input>*
*<output>*
*<soap:body use="literal"/>*
*</output>*
*</operation>*
*</binding>*
*<service name="demoWS">*
*<port name="demoWSSoapHttpPort" binding="tns:demoWSSoapHttpPortBinding">*
*<soap:address location="http://192.168.88.131:7001/DemoWebService-DemoWS-context-root/demoWSSoapHttpPort"/>*
*</port>*
*</service>*
*</definitions>*
Thanks
klogubeHi LJ,
I did the same. I configured my WLS for development mode by making production_mode = false. But still I cant able to open http://localhost:7001/wls_utc window and so far cant able to test my WS :(
Please check my config file and let me know where else I suppose to make the production mode false!!
#!/bin/sh
# WARNING: This file is created by the Configuration Wizard.
# Any changes to this script may be lost when adding extensions to this configuration.
# --- Start Functions ---
BP=100
SP=$BP
pushd()
if [ -z "$1" ]
then
return
fi
SP=`expr $SP - 1`
eval _stack$SP=`pwd`
cd $1
return
popd()
if [ $SP -eq $BP ]
then
return
fi
eval cd \${_stack$SP}
SP=`expr $SP + 1`
return
# --- End Functions ---
# This script is used to setup the needed environment to be able to start Weblogic Server in this domain.
# This script initializes the following variables before calling commEnv to set other variables:
# WL_HOME - The BEA home directory of your WebLogic installation.
# JAVA_VM - The desired Java VM to use. You can set this environment variable before calling
# this script to switch between Sun or BEA or just have the default be set.
# JAVA_HOME - Location of the version of Java used to start WebLogic
# Server. Depends directly on which JAVA_VM value is set by default or by the environment.
# USER_MEM_ARGS - The variable to override the standard memory arguments
# passed to java.
# PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
# DOMAIN_PRODUCTION_MODE
# - The variable that determines whether the workshop related settings like the debugger,
# testconsole or iterativedev should be enabled. ONLY settable using the
# command-line parameter named production
# NOTE: Specifying the production command-line param will force
# the server to start in production mode.
# Other variables used in this script include:
# SERVER_NAME - Name of the weblogic server.
# JAVA_OPTIONS - Java command-line options for running the server. (These
# will be tagged on to the end of the JAVA_VM and
# MEM_ARGS)
# For additional information, refer to the WebLogic Server Administration
# Console Online Help(http://e-docs.bea.com/wls/docs103/ConsoleHelp/startstop.html).
ORACLE_HOME="/opt/oracle/middleware/jdeveloper"
export ORACLE_HOME
WL_HOME="/opt/oracle/middleware/wlserver_10.3"
export WL_HOME
BEA_JAVA_HOME="/opt/oracle/middleware/jrockit_160_05"
export BEA_JAVA_HOME
SUN_JAVA_HOME=""
export SUN_JAVA_HOME
if [ "${JAVA_VENDOR}" = "BEA" ] ; then
JAVA_HOME="${BEA_JAVA_HOME}"
export JAVA_HOME
else
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
JAVA_HOME="${SUN_JAVA_HOME}"
export JAVA_HOME
else
JAVA_VENDOR="BEA"
export JAVA_VENDOR
JAVA_HOME="/opt/oracle/middleware/jrockit_160_05"
export JAVA_HOME
fi
fi
# We need to reset the value of JAVA_HOME to get it shortened AND
# we can not shorten it above because immediate variable expansion will blank it
JAVA_HOME="${JAVA_HOME}"
export JAVA_HOME
SAMPLES_HOME="${WL_HOME}/samples"
export SAMPLES_HOME
DOMAIN_HOME="/opt/oracle/middleware/user_projects/domains/base_domain"
export DOMAIN_HOME
LONG_DOMAIN_HOME="/opt/oracle/middleware/user_projects/domains/base_domain"
export LONG_DOMAIN_HOME
if [ "${DEBUG_PORT}" = "" ] ; then
DEBUG_PORT="8453"
export DEBUG_PORT
fi
if [ "${SERVER_NAME}" = "" ] ; then
SERVER_NAME="AdminServer"
export SERVER_NAME
fi
POINTBASE_FLAG="false"
export POINTBASE_FLAG
enableHotswapFlag=""
export enableHotswapFlag
PRODUCTION_MODE="false"
export PRODUCTION_MODE
doExitFlag="false"
export doExitFlag
verboseLoggingFlag="false"
export verboseLoggingFlag
while [ $# -gt 0 ]
do
case $1 in
nodebug)
debugFlag="false"
export debugFlag
production)
DOMAIN_PRODUCTION_MODE="true"
export DOMAIN_PRODUCTION_MODE
notestconsole)
testConsoleFlag="false"
export testConsoleFlag
noiterativedev)
iterativeDevFlag="false"
export iterativeDevFlag
noLogErrorsToConsole)
logErrorsToConsoleFlag="false"
export logErrorsToConsoleFlag
nopointbase)
POINTBASE_FLAG="false"
export POINTBASE_FLAG
doExit)
doExitFlag="true"
export doExitFlag
noExit)
doExitFlag="false"
export doExitFlag
verbose)
verboseLoggingFlag="true"
export verboseLoggingFlag
enableHotswap)
enableHotswapFlag="-javaagent:${WL_HOME}/server/lib/diagnostics-agent.jar"
export enableHotswapFlag
PROXY_SETTINGS="${PROXY_SETTINGS} $1"
export PROXY_SETTINGS
esac
shift
done
MEM_DEV_ARGS=""
export MEM_DEV_ARGS
if [ "${DOMAIN_PRODUCTION_MODE}" = "true" ] ; then
PRODUCTION_MODE="${DOMAIN_PRODUCTION_MODE}"
export PRODUCTION_MODE
fi
if [ "${PRODUCTION_MODE}" = "true" ] ; then
debugFlag="false"
export debugFlag
testConsoleFlag="false"
export testConsoleFlag
iterativeDevFlag="false"
export iterativeDevFlag
fi
# If you want to override the default Patch Classpath, Library Path and Path for this domain,
# Please uncomment the following lines and add a valid value for the environment variables
# set PATCH_CLASSPATH=[myPatchClasspath] (windows)
# set PATCH_LIBPATH=[myPatchLibpath] (windows)
# set PATCH_PATH=[myPatchPath] (windows)
# PATCH_CLASSPATH=[myPatchClasspath] (unix)
# PATCH_LIBPATH=[myPatchLibpath] (unix)
# PATCH_PATH=[myPatchPath] (unix)
. ${WL_HOME}/common/bin/commEnv.sh
WLS_HOME="${WL_HOME}/server"
export WLS_HOME
MEM_ARGS="-Xms256m -Xmx512m"
export MEM_ARGS
MEM_PERM_SIZE="-XX:PermSize=48m"
export MEM_PERM_SIZE
MEM_MAX_PERM_SIZE="-XX:MaxPermSize=192m"
export MEM_MAX_PERM_SIZE
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
if [ "${PRODUCTION_MODE}" = "" ] ; then
MEM_DEV_ARGS="-XX:CompileThreshold=8000 ${MEM_PERM_SIZE} "
export MEM_DEV_ARGS
fi
fi
# Had to have a separate test here BECAUSE of immediate variable expansion on windows
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
MEM_ARGS="${MEM_ARGS} ${MEM_DEV_ARGS} ${MEM_MAX_PERM_SIZE}"
export MEM_ARGS
fi
if [ "${JAVA_VENDOR}" = "HP" ] ; then
MEM_ARGS="${MEM_ARGS} ${MEM_MAX_PERM_SIZE}"
export MEM_ARGS
fi
# IF USER_MEM_ARGS the environment variable is set, use it to override ALL MEM_ARGS values
if [ "${USER_MEM_ARGS}" != "" ] ; then
MEM_ARGS="${USER_MEM_ARGS}"
export MEM_ARGS
fi
JAVA_PROPERTIES="-Dplatform.home=${WL_HOME} -Dwls.home=${WLS_HOME} -Dweblogic.home=${WLS_HOME} "
export JAVA_PROPERTIES
# To use Java Authorization Contract for Containers (JACC) in this domain,
# please uncomment the following section. If there are multiple machines in
# your domain, be sure to edit the setDomainEnv in the associated domain on
# each machine.
# -Djava.security.manager
# -Djava.security.policy=location of weblogic.policy
# -Djavax.security.jacc.policy.provider=weblogic.security.jacc.simpleprovider.SimpleJACCPolicy
# -Djavax.security.jacc.PolicyConfigurationFactory.provider=weblogic.security.jacc.simpleprovider.PolicyConfigurationFactoryImpl
# -Dweblogic.security.jacc.RoleMapperFactory.provider=weblogic.security.jacc.simpleprovider.RoleMapperFactoryImpl
EXTRA_JAVA_PROPERTIES="-Ddomain.home=${DOMAIN_HOME} -Doracle.home=${ORACLE_HOME} -Doracle.security.jps.config=${DOMAIN_HOME}/config/oracle/jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol ${EXTRA_JAVA_PROPERTIES}"
export EXTRA_JAVA_PROPERTIES
JAVA_PROPERTIES="${JAVA_PROPERTIES} ${EXTRA_JAVA_PROPERTIES}"
export JAVA_PROPERTIES
ARDIR="${WL_HOME}/server/lib"
export ARDIR
pushd ${LONG_DOMAIN_HOME}
# Clustering support (edit for your cluster!)
if [ "${ADMIN_URL}" = "" ] ; then
# The then part of this block is telling us we are either starting an admin server OR we are non-clustered
CLUSTER_PROPERTIES="-Dweblogic.management.discover=true"
export CLUSTER_PROPERTIES
else
CLUSTER_PROPERTIES="-Dweblogic.management.discover=false -Dweblogic.management.server=${ADMIN_URL}"
export CLUSTER_PROPERTIES
fi
if [ "${LOG4J_CONFIG_FILE}" != "" ] ; then
JAVA_PROPERTIES="${JAVA_PROPERTIES} -Dlog4j.configuration=file:${LOG4J_CONFIG_FILE}"
export JAVA_PROPERTIES
fi
JAVA_PROPERTIES="${JAVA_PROPERTIES} ${CLUSTER_PROPERTIES}"
export JAVA_PROPERTIES
# Clear the pre_classpath here in case an application template wants to set it before the larger pre_classpath is invoked below
PRE_CLASSPATH=""
export PRE_CLASSPATH
JAVA_DEBUG=""
export JAVA_DEBUG
if [ "${debugFlag}" = "true" ] ; then
JAVA_DEBUG="-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=${DEBUG_PORT},server=y,suspend=n -Djava.compiler=NONE"
export JAVA_DEBUG
JAVA_OPTIONS="${JAVA_OPTIONS} ${enableHotswapFlag} -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole..."
export JAVA_OPTIONS
else
JAVA_OPTIONS="${JAVA_OPTIONS} ${enableHotswapFlag} -da"
export JAVA_OPTIONS
fi
if [ ! -d ${JAVA_HOME}/lib ] ; then
echo "The JRE was not found in directory ${JAVA_HOME}. (JAVA_HOME)"
echo "Please edit your environment and set the JAVA_HOME"
echo "variable to point to the root directory of your Java installation."
popd
read _val
exit
fi
if [ "${POINTBASE_FLAG}" = "true" ] ; then
DATABASE_CLASSPATH="${POINTBASE_CLASSPATH}"
export DATABASE_CLASSPATH
else
DATABASE_CLASSPATH="${POINTBASE_CLIENT_CLASSPATH}"
export DATABASE_CLASSPATH
fi
POST_CLASSPATH=""
export POST_CLASSPATH
POST_CLASSPATH="${ORACLE_HOME}/modules/features/adf.share_11.1.1.jar${CLASSPATHSEP}${POST_CLASSPATH}"
export POST_CLASSPATH
POST_CLASSPATH="${POST_CLASSPATH}${CLASSPATHSEP}${DATABASE_CLASSPATH}${CLASSPATHSEP}${ARDIR}/xqrl.jar"
export POST_CLASSPATH
# PROFILING SUPPORT
JAVA_PROFILE=""
export JAVA_PROFILE
SERVER_CLASS="weblogic.Server"
export SERVER_CLASS
JAVA_PROPERTIES="${JAVA_PROPERTIES} ${WLP_JAVA_PROPERTIES}"
export JAVA_PROPERTIES
JAVA_OPTIONS="${JAVA_OPTIONS} ${JAVA_PROPERTIES} -Dwlw.iterativeDev=${iterativeDevFlag} -Dwlw.testConsole=${testConsoleFlag} -Dwlw.logErrorsToConsole=${logErrorsToConsoleFlag}"
export JAVA_OPTIONS
# -- Setup properties so that we can save stdout and stderr to files
if [ "${WLS_STDOUT_LOG}" != "" ] ; then
echo "Logging WLS stdout to ${WLS_STDOUT_LOG}"
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.Stdout=${WLS_STDOUT_LOG}"
export JAVA_OPTIONS
fi
if [ "${WLS_STDERR_LOG}" != "" ] ; then
echo "Logging WLS stderr to ${WLS_STDERR_LOG}"
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.Stderr=${WLS_STDERR_LOG}"
export JAVA_OPTIONS
fi
# ADD EXTENSIONS TO CLASSPATHS
if [ "${EXT_PRE_CLASSPATH}" != "" ] ; then
PRE_CLASSPATH="${EXT_PRE_CLASSPATH}${CLASSPATHSEP}${PRE_CLASSPATH}"
export PRE_CLASSPATH
fi
if [ "${EXT_POST_CLASSPATH}" != "" ] ; then
POST_CLASSPATH="${POST_CLASSPATH}${CLASSPATHSEP}${EXT_POST_CLASSPATH}"
export POST_CLASSPATH
fi
if [ "${WEBLOGIC_EXTENSION_DIRS}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.ext.dirs=${WEBLOGIC_EXTENSION_DIRS}"
export JAVA_OPTIONS
fi
JAVA_OPTIONS="${JAVA_OPTIONS}"
export JAVA_OPTIONS
# SET THE CLASSPATH
CLASSPATH="${PRE_CLASSPATH}${CLASSPATHSEP}${WEBLOGIC_CLASSPATH}${CLASSPATHSEP}${POST_CLASSPATH}${CLASSPATHSEP}${WLP_POST_CLASSPATH}"
export CLASSPATH
JAVA_VM="${JAVA_VM} ${JAVA_DEBUG} ${JAVA_PROFILE}"
export JAVA_VM
Edited by: klogube on Oct 23, 2009 10:58 AM -
Service Hub Transport not started
Hi all
I have single virtual machine with Win2008EEx64 with role Domain Controller i try install Exchange 2010 with roles Mailbox,CAS and HUB When i install HUB role occur error. Service HUB Transport not start :(
Here link with error http://img7.imageshack.us/img7/1245/errorhub.jpg I can Uploading full logs install Exchange 2010. Perhaps do you have
concurrent errors ?
Small fragment log :(
"[04/18/2009 12:43:51.0403] [1] Processing component 'Bridgehead Service Configuration' (Starting Hub Transport services).
[04/18/2009 12:43:51.0403] [1] Executing 'if ($RoleStartTransportService) { start-SetupService -ServiceName MSExchangeTransport }', handleError = False
[04/18/2009 12:43:51.0403] [2] Launching sub-task '$error.Clear(); if ($RoleStartTransportService) { start-SetupService -ServiceName MSExchangeTransport }'.
[04/18/2009 12:43:51.0403] [2] Runspace context: Executing user: Exchange2010.local/Users/Administrator, Executing user organization: , Current organization: .
[04/18/2009 12:43:51.0403] [2] Beginning processing.
[04/18/2009 12:43:51.0403] [2] Current ScopeSet is: {Domain Read Scope: {, }, Domain Write Scope(s): {, }, Configuration Scope: {, }, Server Configuration Scope(s): , Exclusive Scope: {, }}
[04/18/2009 12:43:51.0403] [2] Resolved current organization: .
[04/18/2009 12:43:53.0840] [2] The maximum wait for the operation is set to '00:15:00'.
[04/18/2009 12:43:53.0840] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='0'- Current checkpoint='0'.
[04/18/2009 12:43:53.0840] [2] Previous service status query time is '4/18/2009 4:43:53 PM'.
[04/18/2009 12:43:53.0840] [2] Current service status query time is '4/18/2009 4:43:53 PM'.
[04/18/2009 12:43:53.0840] [2] Will wait '2000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:43:55.0934] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '2000' milliseconds.
[04/18/2009 12:43:55.0934] [2] The remaining time for service status change is '00:14:58'.
[04/18/2009 12:43:55.0934] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
[04/18/2009 12:43:55.0934] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:45:26.0012] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:45:26.0012] [2] The remaining time for service status change is '00:13:28'.
[04/18/2009 12:45:26.0012] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:45:26.0012] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:45:26.0012] [2] Current service status query time is '4/18/2009 4:45:26 PM'.
[04/18/2009 12:45:26.0012] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:46:56.0043] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:46:56.0043] [2] The remaining time for service status change is '00:11:58'.
[04/18/2009 12:46:56.0043] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:46:56.0043] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:46:56.0043] [2] Current service status query time is '4/18/2009 4:46:56 PM'.
[04/18/2009 12:46:56.0043] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:48:26.0293] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:48:26.0293] [2] The remaining time for service status change is '00:10:28'.
[04/18/2009 12:48:26.0293] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:48:26.0293] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:48:26.0293] [2] Current service status query time is '4/18/2009 4:48:26 PM'.
[04/18/2009 12:48:26.0293] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:49:56.0465] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:49:56.0465] [2] The remaining time for service status change is '00:08:58'.
[04/18/2009 12:49:56.0465] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:49:56.0465] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:49:56.0465] [2] Current service status query time is '4/18/2009 4:49:56 PM'.
[04/18/2009 12:49:56.0465] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:51:26.0481] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:51:26.0481] [2] The remaining time for service status change is '00:07:28'.
[04/18/2009 12:51:26.0481] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:51:26.0481] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:51:26.0481] [2] Current service status query time is '4/18/2009 4:51:26 PM'.
[04/18/2009 12:51:26.0481] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:52:56.0496] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:52:56.0496] [2] The remaining time for service status change is '00:05:58'.
[04/18/2009 12:52:56.0496] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:52:56.0496] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:52:56.0496] [2] Current service status query time is '4/18/2009 4:52:56 PM'.
[04/18/2009 12:52:56.0496] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:54:26.0668] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:54:26.0668] [2] The remaining time for service status change is '00:04:28'.
[04/18/2009 12:54:26.0668] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:54:26.0668] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:54:26.0668] [2] Current service status query time is '4/18/2009 4:54:26 PM'.
[04/18/2009 12:54:26.0668] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:55:56.0700] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:55:56.0700] [2] The remaining time for service status change is '00:02:58'.
[04/18/2009 12:55:56.0700] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:55:56.0700] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:55:56.0700] [2] Current service status query time is '4/18/2009 4:55:56 PM'.
[04/18/2009 12:56:10.0246] [2] Generated Watson report with dump for the service MSExchangeTransport
[04/18/2009 12:56:10.0246] [2] [ERROR] Unexpected Error
[04/18/2009 12:56:10.0246] [2] [ERROR] Service 'MSExchangeTransport' failed to reach status 'Running' on this server.
[04/18/2009 12:56:10.0262] [2] Ending processing.
[04/18/2009 12:56:10.0262] [1] The following 1 error(s) occurred during task execution:
[04/18/2009 12:56:10.0262] [1] 0. ErrorRecord: Service 'MSExchangeTransport' failed to reach status 'Running' on this server.
[04/18/2009 12:56:10.0262] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceDidNotReachStatusException: Service 'MSExchangeTransport' failed to reach status 'Running' on this server.
[04/18/2009 12:56:10.0278] [1] [ERROR] The execution of: "$error.Clear(); if ($RoleStartTransportService) { start-SetupService -ServiceName MSExchangeTransport }", generated the following error: "Service 'MSExchangeTransport' failed to reach status 'Running' on this server.".
[04/18/2009 12:56:10.0278] [1] [ERROR] Service 'MSExchangeTransport' failed to reach status 'Running' on this server.
[04/18/2009 12:56:10.0278] [1] [WARNING] <<< Setup failed to execute a task. Dumping all variables.... >>>
[04/18/2009 12:56:10.0278] [1] $ =
[04/18/2009 12:56:10.0278] [1] ? = True
[04/18/2009 12:56:10.0278] [1] ^ =
[04/18/2009 12:56:10.0278] [1] _ =
[04/18/2009 12:56:10.0278] [1] addressSpace = MOBILE:*
[04/18/2009 12:56:10.0278] [1] agent =
[04/18/2009 12:56:10.0278] [1] agentAssembly = C:\Program Files\Microsoft\Exchange Server\V14\bin\Microsoft.Exchange.MobileDriver.dll
[04/18/2009 12:56:10.0278] [1] agentFactory = Microsoft.Exchange.TextMessaging.MobileDriver.TextMessagingDeliveryAgentFactory
[04/18/2009 12:56:10.0278] [1] agentName = Text Messaging Delivery Agent
[04/18/2009 12:56:10.0278] [1] args =
[04/18/2009 12:56:10.0278] [1] assembly = Microsoft.Exchange.ProvisioningAgent.dll
[04/18/2009 12:56:10.0278] [1] classFactory = Microsoft.Exchange.ProvisioningAgent.AdminLogAgentClassFactory
[04/18/2009 12:56:10.0278] [1] comClassFile = C:\Program Files\Microsoft\Exchange Server\V14\bin\Monitoring\x86\DiagnosticCmdletController.dll
[04/18/2009 12:56:10.0278] [1] ConfirmPreference = None
[04/18/2009 12:56:10.0278] [1] connector = Text Messaging Delivery Agent Connector
[04/18/2009 12:56:10.0278] [1] connectorName = Text Messaging Delivery Agent Connector
[04/18/2009 12:56:10.0278] [1] ConsoleFileName =
[04/18/2009 12:56:10.0278] [1] DebugPreference = SilentlyContinue
[04/18/2009 12:56:10.0278] [1] deliveryProtocol = MOBILE
[04/18/2009 12:56:10.0278] [1] dllFile = C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSMIME.dll
[04/18/2009 12:56:10.0278] [1] Error = System.Collections.ArrayList
[04/18/2009 12:56:10.0278] [1] ErrorActionPreference = Continue
[04/18/2009 12:56:10.0278] [1] ErrorView = NormalView
[04/18/2009 12:56:10.0278] [1] ExchangePropertyContainer = Microsoft.Exchange.Configuration.Tasks.ExchangePropertyContainer
[04/18/2009 12:56:10.0278] [1] ExecutionContext = System.Management.Automation.EngineIntrinsics
[04/18/2009 12:56:10.0278] [1] exsSid = S-1-5-21-3189551677-1878205415-1818128433-1104
[04/18/2009 12:56:10.0278] [1] false = False
[04/18/2009 12:56:10.0278] [1] file = microsoft.exchange.protectedservicehost.exe.config
[04/18/2009 12:56:10.0278] [1] FormatEnumerationLimit = 4
[04/18/2009 12:56:10.0278] [1] fullPath = C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.protectedservicehost.exe
[04/18/2009 12:56:10.0278] [1] HOME = C:\Users\Administrator
[04/18/2009 12:56:10.0278] [1] Host = System.Management.Automation.Internal.Host.InternalHost
[04/18/2009 12:56:10.0278] [1] input =
[04/18/2009 12:56:10.0278] [1] installedAgents =
[04/18/2009 12:56:10.0278] [1] InternalPowerShellUrl = https://WIN-EMFQIRKOWAL.Exchange2010.local/powershell
[04/18/2009 12:56:10.0278] [1] journalAgent =
[04/18/2009 12:56:10.0278] [1] localSite = Exchange2010.local/Configuration/Sites/Default-First-Site-Name
[04/18/2009 12:56:10.0278] [1] localSiteEdgeSyncConfig =
[04/18/2009 12:56:10.0278] [1] localSiteName = Default-First-Site-Name
[04/18/2009 12:56:10.0278] [1] MaximumAliasCount = 4096
[04/18/2009 12:56:10.0278] [1] MaximumDriveCount = 4096
[04/18/2009 12:56:10.0278] [1] MaximumErrorCount = 256
[04/18/2009 12:56:10.0278] [1] MaximumFunctionCount = 4096
[04/18/2009 12:56:10.0278] [1] MaximumHistoryCount = 64
[04/18/2009 12:56:10.0278] [1] MaximumVariableCount = 4096
[04/18/2009 12:56:10.0278] [1] mflFilePath = C:\Program Files\Microsoft\Exchange Server\V14\bin\en\Exchange.MFL
[04/18/2009 12:56:10.0278] [1] mofFilePath = C:\Program Files\Microsoft\Exchange Server\V14\bin\Exchange.MOF
[04/18/2009 12:56:10.0278] [1] MyInvocation =
[04/18/2009 12:56:10.0278] [1] NestedPromptLevel = 0
[04/18/2009 12:56:10.0278] [1] null =
[04/18/2009 12:56:10.0278] [1] organizationConfig = Exchange2007
[04/18/2009 12:56:10.0278] [1] OutputEncoding = System.Text.ASCIIEncoding
[04/18/2009 12:56:10.0278] [1] PID = 2380
[04/18/2009 12:56:10.0278] [1] ProgressPreference = Continue
[04/18/2009 12:56:10.0278] [1] PSBoundParameters = System.Collections.Generic.Dictionary`2[System.String,System.Object]
[04/18/2009 12:56:10.0278] [1] PSCmdlet =
[04/18/2009 12:56:10.0278] [1] PSCulture = en-US
[04/18/2009 12:56:10.0278] [1] PSEmailServer =
[04/18/2009 12:56:10.0278] [1] PSHOME = C:\Windows\system32\WindowsPowerShell\v1.0\
[04/18/2009 12:56:10.0278] [1] PSMaximumReceivedDataSizePerCommandMB = 2047
[04/18/2009 12:56:10.0278] [1] PSMaximumReceivedObjectSizeMB = 2047
[04/18/2009 12:56:10.0278] [1] PSSessionApplicationName = wsman
[04/18/2009 12:56:10.0278] [1] PSSessionConfigurationName = http://schemas.microsoft.com/powershell/Microsoft.PowerShell
[04/18/2009 12:56:10.0278] [1] PSTypePath =
[04/18/2009 12:56:10.0278] [1] PSUICulture = en-US
[04/18/2009 12:56:10.0278] [1] PSVersionTable = System.Collections.Hashtable
[04/18/2009 12:56:10.0278] [1] PWD = C:\Windows\Temp\ExchangeSetup
[04/18/2009 12:56:10.0278] [1] regsvr = C:\Windows\system32\regsvr32.exe
[04/18/2009 12:56:10.0278] [1] regSvr32WOW = C:\Windows\sysWOW64\regsvr32.exe
[04/18/2009 12:56:10.0278] [1] ReportErrorShowExceptionClass = 0
[04/18/2009 12:56:10.0278] [1] ReportErrorShowInnerException = 0
[04/18/2009 12:56:10.0278] [1] ReportErrorShowSource = 1
[04/18/2009 12:56:10.0278] [1] ReportErrorShowStackTrace = 0
[04/18/2009 12:56:10.0278] [1] RoleBinPath = C:\Program Files\Microsoft\Exchange Server\V14\Bin
[04/18/2009 12:56:10.0278] [1] RoleCustomerFeedbackEnabled = True
[04/18/2009 12:56:10.0278] [1] RoleDatacenterPath = C:\Program Files\Microsoft\Exchange Server\V14\Datacenter
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointABCHContactService = <ServiceEndpoint><Url>http://pvt-contacts.msn.com/abservice/abservice.asmx</Url></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointDomainPartnerManageDelegation = <ServiceEndpoint><Url>https://domains.live.com/service/managedelegation.asmx</Url></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveFederationDeprecatedMetadata = <ServiceEndpoint><Url>https://nexus.passport.com/FederationMetadata/2006-02/FederationMetadata.xml</Url></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveGetUserRealm = <ServiceEndpoint><Url>https://login.live.com/GetUserRealm.srf</Url></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveRmsCertificationService = <ServiceEndpoint><Url>https://licensing.drm.microsoft.com/licensing/licensing.asmx</Url><CertificateSubjectName>TO BE FILLED IN </CertificateSubjectName></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveRmsLicensingService = <ServiceEndpoint><Url>https://certification.drm.microsoft.com/certification/certification.asmx</Url><CertificateSubjectName>TO BE FILLED IN </CertificateSubjectName></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveRmsPublishingService = <ServiceEndpoint><Url>https://licensing.drm.microsoft.com/licensing/publish.asmx</Url><CertificateSubjectName>TO BE FILLED IN </CertificateSubjectName></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveServiceLogin2 = <ServiceEndpoint><Url>https://login.live.com/RST2.srf</Url></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointRmsPremiseAuthenticationCertificate = <ServiceEndpoint><CertificateSubjectName>CN=exchangelabs.live-int.com, OU=Exchange, O=Microsoft, L=Redmond, S=Washington, C=US</CertificateSubjectName></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDomainController = WIN-EMFQIRKOWAL.Exchange2010.local
[04/18/2009 12:56:10.0278] [1] RoleFqdnOrName = WIN-EMFQIRKOWAL.Exchange2010.local
[04/18/2009 12:56:10.0278] [1] RoleInstallationMode = Install
[04/18/2009 12:56:10.0278] [1] RoleInstallPath = C:\Program Files\Microsoft\Exchange Server\V14\
[04/18/2009 12:56:10.0278] [1] RoleInvocationID = 20090418-1525100043514005697
[04/18/2009 12:56:10.0278] [1] RoleIsAdminToolsRoleInstalled = True
[04/18/2009 12:56:10.0278] [1] RoleIsDatacenter = False
[04/18/2009 12:56:10.0278] [1] RoleLanguagePacksPath = C:\1\
[04/18/2009 12:56:10.0278] [1] RoleLoggedOnUser = EXCHANGE2010\Administrator
[04/18/2009 12:56:10.0278] [1] RoleLoggingPath = C:\Program Files\Microsoft\Exchange Server\V14\Logging
[04/18/2009 12:56:10.0278] [1] RoleNetBIOSName = WIN-EMFQIRKOWAL
[04/18/2009 12:56:10.0278] [1] RolePreviousVersion =
[04/18/2009 12:56:10.0278] [1] RoleProductPlatform = amd64
[04/18/2009 12:56:10.0278] [1] RoleRoleName = BridgeheadRole
[04/18/2009 12:56:10.0278] [1] RoleRoles = AdminToolsRole
[04/18/2009 12:56:10.0278] [1] RoleSetupLoggingPath = C:\ExchangeSetupLogs
[04/18/2009 12:56:10.0278] [1] RoleStartTransportService = True
[04/18/2009 12:56:10.0278] [1] RoleTargetVersion = 14.00.0482.020
[04/18/2009 12:56:10.0278] [1] RoleUpdatesDir = C:\1\Updates
[04/18/2009 12:56:10.0278] [1] server = WIN-EMFQIRKOWAL
[04/18/2009 12:56:10.0278] [1] ShellId = Microsoft.PowerShell
[04/18/2009 12:56:10.0278] [1] StackTrace =
[04/18/2009 12:56:10.0278] [1] this =
[04/18/2009 12:56:10.0278] [1] true = True
[04/18/2009 12:56:10.0278] [1] user = Exchange2010.local/Users/Administrator
[04/18/2009 12:56:10.0278] [1] vdirName = PowerShell
[04/18/2009 12:56:10.0278] [1] VerbosePreference = SilentlyContinue
[04/18/2009 12:56:10.0278] [1] w3svc = System.ServiceProcess.ServiceController
[04/18/2009 12:56:10.0278] [1] WarningPreference = Continue
[04/18/2009 12:56:10.0278] [1] wasRunning = True
[04/18/2009 12:56:10.0278] [1] WhatIfPreference = False
[04/18/2009 12:56:10.0278] [1] WSManMaxRedirectionCount = 5
[04/18/2009 12:56:10.0278] [1] [WARNING] <<< Variable dumping complete. >>
[04/18/2009 12:56:10.0309] [1] Setup is halting task execution because of one or more errors in a critical task.
[04/18/2009 12:56:10.0309] [1] Finished executing component tasks.
[04/18/2009 12:56:10.0371] [1] Ending processing.
[04/18/2009 13:07:51.0090] [0] [WARNING] Setup has made changes to operating system settings that require a reboot to take effect. Please reboot this server prior to placing it into production.
[04/18/2009 13:07:51.0153] [0] End of Setup
[04/18/2009 13:07:51.0153] [0] **********************************************Hi
I tested your problem in test lab and when desable ip v6 on network connection Transport service will take long time to start.
Try again after enable ipv6.
BTW-Also i was found good article for similar case with your case <!-- /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {mso-style-parent:""; margin:0in; margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-fareast-font-family:"Times New Roman";} @page Section1 {size:8.5in 11.0in; margin:1.0in 1.25in 1.0in 1.25in; mso-header-margin:.5in; mso-footer-margin:.5in; mso-paper-source:0;} div.Section1 {page:Section1;} -->
http://www.exchangeinbox.com/article.aspx?i=111
RegardsChinthaka
-If you think my thread is helpful for you, Please vote. -
I am getting the following error message when I try invoking
a webservice.
Could not generate stub objects for web service invocation.
Name: ProgrammePrivilege. WSDL:
https://clientaccweb.reseaudistinction.com/CardHolderInfo.asmx?WSDL.
org.xml.sax.SAXException: Fatal Error: URI=null Line=11: The
element type "META" must be terminated by the matching end-tag "".
It is recommended that you use a web browser to retrieve and
examine the requested WSDL document for correctness. If the
requested WSDL document can't be retrieved or it is dynamically
generated, it is likely that the target web service has programming
errors.
The problem is, the webservice is working fine, the
application was working yesterday, the error message just appears
after a couple of days and I have to refresh the service in the CF
Administrator. Once I refresh it, everything starts working again.
Anyone else got this problem? ANY help would be appreciated!
If you guys need my code anyway, I can attach it but like I
said, everything works for a couple of days, then, out of the blue,
it stops working so I doubt that it's my CFINVOKE that's the
problem...Similar kind of problems here - reported back to Adobe a
couple of months ago, so let's wait and hope for the best. My
problems have related to registering multiple web services and
executing them. One problem is that, If I register two identical
(and quite complex) web services, I can only execute either of
them. After CF restart, either of them works, but invoking the
other doesn't work.
For example; CF_Restart -> Try A first, A works -> B
doesn't. Also, CF_Restart -> Try B first, B works -> A
doesn't.
CFMX7.0.2, Apache 2.2, WinXP -
The RFUMSV50 program does not generate transfer lines of deferred VAT
Hello;
The RFUMSV50 program does not generate transfer lines of deferred VAT ,
The context is the following one:
Code VAT Created with code target VAT, general account of VAT also created,
Rule of deferred VAT created and activated for the company code in question, with marks to compensate for check.
The data of tests are the following ones:
Creation of an invoice via the FB60,
Integral payment of the invoice via F-53,
Creation of the confirmation of the operation in bank via the manual statement FF67,
Clearing of the intermediate banking account with the bank account via F-03.
After all these elements, by executing the RFUMSV50 program, I have nothing in result.
There somebody who had the same problem, could help us?
Thank you.Hi
Service Tax credit cannot be utilized unless the Vendor Invoice is Paid. This is the reason till the payment is done the service tax Amount will be accumulated in deferred tax account and once the invoice is paid the balance in deferred tax is need to be transferred to respective Service Tax , Educational Cess and higher Education Cess account. There can be various business scenarios for full and Partial Payment to facilitates the transfer of such deferred balance to respective account SAP has come up with some new standard program RFUMSV50 instead of RFUMSV25. To overcome the limitation of this program i.e. not able to take care of more than one tax line item, below the solution is provided with scenarios “Full Payment is made to Vendor Invoice”.
hope this is help ful
thanks
Trinath -
PR not generated after WO released.
Hi,
I created an external service operation and assign it to a contract. I would expect after release the work order, an auto PR will be generated. However, when I display the external item to see the PR number, the Requisition field is blank. No PR generated for the work order.
In order to generate the PR, I tried to add new external service operation to the work order. Unfortunatly I hit error message 'Purchase requisition for service activity / element cannot be generated Message no. CN 764'. I've entered every item required for the external service, but keep getting same error message.
Please advise, if anyone knows any correction program available in the system that can auto generate the PR.
Thanks and regards,
Maziyah.Dear,
Since the service packet has not been created, no purchase requisition can be created. Therefore, the system generates message CN764 and the indicator is set to 'Never'.
If the assigned activity has status 'REL', the created service element is also released. If the Res/PurcRq indicator is set in the activity element (immediate or from release), the system attempts to create a purchase requisition.
System generates the purchase requisition immediately after the service lines have been maintained.
Also check the specify the item category as D?
Regards,
R.Brahmankar -
Alerts are not generated at all
Hello.
Please, help me with following problem.
I have Site Server (SCCM 2012 with SP1) installed on server (Win 2008 R2 w SP1). On this server also installed MP, DP, FSP, RSP, Site Database, SUP. On second server (win 2008 R2 wSP1) installed MP and SUP.
I want to monitor some SCCM functionallity with Alerts. I configure alerts for MP Health, SUP Synchronization failures, Database low disk space and so on.
When i stop service (SMS Agent Host) on second server (or disconnect server from network) i can see Management Point status (in Site Status Status) changed to Critical (also appropriate event appears in event log). But no alert generates in SCCM.
In test environment (this is not copy of production environment.. simply clean install of SCCM with some configuration changes for testing purpose) alert successfully generates.
In test environment I see the following messages in smsdbmon.log:
SQL>>>exec dbo.spGetChangeNotifications SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:25:36 3192 (0x0C78)SQL>>>>> Done. SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)RCV: UPDATE on AlertForTrigger for SMS_Alert_upd_SMSProv_AlertForTrigger [16777224 ][72057594038089152] SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>set quoted_identifier on;set ansi_warnings on;set ansi_padding on;set ansi_nulls on;set concat_null_yields_null on;set arithabort on;set numeric_roundabort off;set DATEFORMAT mdy; SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>>> Done. SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>exec dbo.spNotifyProvider @Component=N'SMS_Alert_upd_SMSProv_AlertForTrigger', @TableName=N'AlertForTrigger', @Action=2, @Key1=N'16777224', @Key2=N'', @Key3=N'' SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>>> Done. SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>delete from TableChangeNotifications where RecordID in (72057594038089152) SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>>> Done. SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>exec dbo.spGetChangeNotifications SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>>> Done. SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:34:01 3192 (0x0C78)
In production system this messages not generated.
Also no alert generates for SUP Sync failure
mcp, mcdba, mcsa, mcse, ccnaHello. No, problem not solved.
We agreed with customer, that we can use event viewer subscriptions instead of sccm alerts.
OK, but exactly how did you setup the alert?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
WL-7 / clientgen task do not generate correct bean for non built-in data type
The clientgen Ant task do not generate a correct JavaBean for this
complexeType definition (returned by a web service method):
extract from WSDL:
<s:complexType name="MyBoggusType">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded"
name="shouldBeAnArray" type="s0:OtherType " />
</s:sequence>
<s:attribute name="total" type="s:int" />
</s:complexType>
The generated JavaBean contains an int (for 'total') and a simple
reference to an OtherType instance (for 'shouldBeAnArray').
The 'shouldBeAnArray' attribute should be an array of OtherType?
What's wrong?
(The service is not implemented by me and I have few control on it)
Is it a bug or a limitation?
Should I write a Codec as a workaround?On Wed, 05 Feb 2003 17:28:40 +0100, Stephane Boisson wrote:
Is it a bug or a limitation?
Should I write a Codec as a workaround?This is a bug. It has been fixed in service pack 2. Refer to CR082308
when contacting support if you need a patch against sp1. You could indeed
write your own codec but it might be easier to just use the patch :)
--Scott -
Hi,
We are on SRM 7.0 , ECC 6 (Ehp 4.0) and trying to configure the MM-SUS scenario.
We are trying to configure service procurement using ESOA.Ideally once a PO is created in my ERP system a corresponding XML PO should be generated for sending it to SUS via XI.
For this I have activated Business Function LOG_MM_P2P_SE_1 and workflow linkages have been activated for events BUS2012 (Created, Changed, Completed, Released) within workflow definition WS53800008.
However the XML PO is still not generated. I have also applied the note : 1316245 in ERP system(Sending XML messages from ERP)
I believe there is a BADI too, but I am unaware of it and how to use it.
I would be grateful if someone could shed some light on this.
Thanks,
NikhilHi,
Can anyone pl help me out with this?
NIkhil -
CiscoWorks LMS 4.0.1 - Could not generate the report
Hello,
I am running CiscoWorks LMS 4.0.1 since 6 months and I wanted to generate today a report about the interface utilization on 2 Cisco switches (Catalyst 3750G). The corresponding job is created, it runs and then i get "succeeded with info" in the "Run Status" column. When I want to click then on the "View Report" link, I get the following error: "Could not generate the report. Either data is not available for the specified duration or the report job failed."
I tried the same procedure with 2 other switches but I have got the same result.
Does anybody has an idea of how I can fix this issue?
Thanks a lot in advanced.
Best regards,
Marc HoffmannHi Marc,
I have this problem too. I rebooted my Windows but no solved. You known the service name responsible for this error? You have any other sugestion?
Thank you !!!
Maybe you are looking for
-
Viewing photos from PC.
i have over 10000 photos on my pc. i want to use the slideshow feature to randomly display my photos on my apple tv. it seems to only rotate through about 100 or so. how can i get apple tv to display ALL my photos. this is the main reason i bought an
-
LCD monitor too dark on Mac Mini
I have tried both a Viewsonic VP730b and a Samsung 740BX and both are way too dark. Here's the wierd thing. If you unplug the DVI connector in the back, and plug it back in, the image looks good. But if you then restart the mini, the image goes back
-
Unable to transfer outside calls twice with CCME 4.0
Hello, I have a 3825 with a CCME 4.0 and one E1. There is an IVR (from stonevoice) implemented. When the operator receives the call, she is able to transfer the call to a internal extension (for example 230), but when the user (ext. 230) tries to tra
-
Freight Value not displayiing in sales order
Hello Everyone.... I am not able to create a returns for particular customer.....in the header conditions, the freight conditions displays but when i enter the frieght rate ...it will not take that into consideration..it will display value as 0 ....a
-
Hi Gurus, i have a simple questions to you (hopefully). At the moment i am working with SOAP AXIS Receiver Adapter because i need to add <wsse> Tags to my SOAP Header. (according to blog: /people/pravesh.puria/blog/2009/08/26/adding-usernametoken-tim