Service pack 5 core dumping
We were having the same trouble with 5.1.0 SP9
using Oracle Client 8.1.5, Oracle Server 8.1.7.
Also using Solaris 2.7 and JDK 1.3.1.
and OCI JDBC drivers supplied by Weblogic.
This gave us sporatic failures identical to below.
Thin drivers were too slow and also produced other
'wierd' side effects.
SP10 allows upgrade to Oracle 8.1.7 client drivers.
The combination upgrade to SP10 and Oracle 8.1.7 client
drivers appears to fix the problem.
--Rich
================
Kumar Allamraju <[email protected]> wrote:
type-4 driver is pure java. It doesn't use native code at all..
Kumar
arun wrote:
I treid using Oracle's type-4 jdbc driver and it work fine - no coredumps so far!
Arun.
Kumar Allamraju wrote:
I don't think SP-5 is causing core dump. The following stack trace
doesn't show me that JVM has core
dumped
on this particular native call. Post the full thread dump here ,so that we can analyze further.
If you take out SP4, don't you see this problem? Could you try type-4driver also?
Kumar
arun wrote:
Hi,
I'm getting a core dump on
SunOS packet 5.7 Generic_106541-08 sun4u sparc SUNW,Ultra-250
WebLogic Build: 5.1.0 Service Pack 5 08/17/2000 07:21:55 #79895
I'm including the relevant(?) stack trace below:
"ExecuteThread-9" (TID:0xf1171580, sys_thread_t:0x552570, state:R,
native ID:0x13) prio=5
at weblogic.db.oci.OciCursor.execAndFetch(Native Method)
at weblogic.db.oci.OciCursor.oci_execAndFetch(OciCursor.java,
Compiled Code)
at weblogic.jdbcbase.oci.Statement.executeQuery(Statement.java,
Compiled Code)
at weblogic.jdbc.pool.Statement.executeQuery(Statement.java,
Compiled Code)
at com.avulet.db.DataDock.getUser(DataDock.java, Compiled
Code)
at com.avulet.db.DataDock.getUser(DataDock.java, CompiledCode)
at
com.avulet.webapp.archive.ArchiveBean.getTop(ArchiveBean.java,Compiled
Code)
at
jsp_servlet._reservation._createRes._jspService(_createRes.java,
Compiled Code)
at weblogic.servlet.jsp.JspBase.service(JspBase.java, Compiled
Code)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java,
Compiled Code)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java,
Compiled Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java,
Compiled Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java,
Compiled Code)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java,
Compiled Code)
at
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java,
Compiled Code)
at
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java,
Compiled Code)
This started happening ever since I applied the service pack 5.Any
ideas on how to get past this?
Thanks,
Arun.
Similar Messages
-
11g Native Web Services Core Dump ( qmuwsPrintPackWSDL() )
I know that native PL/SQL web services are newer functionality, but I have not been able to find any information on the following issue on MetaLink or here on the forums. When creating 11g native web services when attempting to retrieve the WSDL documents from the server the document is only partially served (estimated at about 2/3rds) or not at all (blank document returned).
Banner: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
The alert log gains this entry:
<msg time='2009-03-30T13:23:21.843-04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='TEST_HOST1' host_addr='10.38.11.20' module=''
pid='16144'>
<txt>Exception [type: ACCESS_VIOLATION, UNABLE_TO_READ] [ADDR:0x98] [PC:0x37FAE2B, _qmuwsPrintPackWSDL()+1031]
</txt>
</msg>
<msg time='2009-03-30T13:23:21.906-04:00' org_id='oracle' comp_id='rdbms'
msg_id='1205222838' type='INCIDENT_ERROR' group='Access Violation'
level='1' host_id='TEST_HOST1' host_addr='10.38.11.20'
prob_key='ORA 7445 [qmuwsPrintPackWSDL()+1031]' upstream_comp='' downstream_comp=''
ecid='' errid='62733' detail_path='c:\app\diag\rdbms\orcl\orcl\trace\orcl_s001_16144.trc'>
<txt>Errors in file c:\app\diag\rdbms\orcl\orcl\trace\orcl_s001_16144.trc (incident=62733):
ORA-07445: exception encountered: core dump [qmuwsPrintPackWSDL()+1031] [ACCESS_VIOLATION] [ADDR:0x98] [PC:0x37FAE2B] [UNABLE_TO_READ] []
</txt>
</msg>
<msg time='2009-03-30T13:23:21.953-04:00' org_id='oracle' comp_id='rdbms'
msg_id='dbgexProcessError:1094:3370026720' type='TRACE' level='16'
host_id='TEST_HOST1' host_addr='10.38.11.20'>
<txt>Incident details in: c:\app\diag\rdbms\orcl\orcl\incident\incdir_62733\orcl_s001_16144_i62733.trc
</txt>
</msg>
<msg time='2009-03-30T13:23:23.250-04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='TEST_HOST1' host_addr='10.38.11.20' module=''
pid='3120'>
<txt>Trace dumping is performing id=[cdmp_20090330132323]
</txt>
</msg>
<msg time='2009-03-30T13:23:26.093-04:00' org_id='oracle' comp_id='rdbms'
msg_id='dbgrimswi_sweep_incident:1855:4220681759' type='ERROR' group='ami_comp'
level='8' host_id='TEST_HOST1' host_addr='10.38.11.20'>
<txt>Sweep Incident[62733]: completed
</txt>
</msg>
<msg time='2009-03-30T13:23:44.500-04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='TEST_HOST1' host_addr='10.38.11.20' module=''
pid='6724'>
<txt>found dead shared server 'S001', pid = (19, 3)
</txt>
</msg>The trace files contain the following:
Trace file c:\app\diag\rdbms\orcl\orcl\trace\orcl_s001_16144.trc
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Windows NT Version V5.2 Service Pack 2
CPU : 16 - type 586, 4 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:10902M/24571M, Ph+PgF:8218M/26299M, VA:349M/2047M
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 19
Windows thread id: 16144, image: ORACLE.EXE (S001)
*** 2009-03-30 13:23:21.828
*** SESSION ID:(129.4177) 2009-03-30 13:23:21.828
*** CLIENT ID:() 2009-03-30 13:23:21.828
*** SERVICE NAME:(SYS$USERS) 2009-03-30 13:23:21.828
*** MODULE NAME:() 2009-03-30 13:23:21.828
*** ACTION NAME:() 2009-03-30 13:23:21.828
Exception [type: ACCESS_VIOLATION, UNABLE_TO_READ] [ADDR:0x98] [PC:0x37FAE2B, _qmuwsPrintPackWSDL()+1031]
Incident 62733 created, dump file: c:\app\diag\rdbms\orcl\orcl\incident\incdir_62733\orcl_s001_16144_i62733.trc
ORA-07445: exception encountered: core dump [qmuwsPrintPackWSDL()+1031] [ACCESS_VIOLATION] [ADDR:0x98] [PC:0x37FAE2B] [UNABLE_TO_READ] []I am at a loss on quickly resolving this issue. I will be attempting to find a solution via an SR, but I am not sure how responsive that will be. Any help is appreciated.
SR Number: 7504349.992Quick test for 11.1.0.7.0 (linux_x64) does not show a problem
SQL> connect sys/oracle as sysdba
Connected.
SQL> --
SQL> def USERNAME=WEB_API
SQL> --
SQL> def PASSWORD=WEB_API
SQL> --
SQL> DROP USER &USERNAME CASCADE
2 /
old 1: DROP USER &USERNAME CASCADE
new 1: DROP USER WEB_API CASCADE
DROP USER WEB_API CASCADE
ERROR at line 1:
ORA-01918: user 'WEB_API' does not exist
SQL> grant connect, resource to &USERNAME identified by &PASSWORD
2 /
old 1: grant connect, resource to &USERNAME identified by &PASSWORD
new 1: grant connect, resource to WEB_API identified by WEB_API
Grant succeeded.
SQL> begin
2 dbms_network_acl_admin.drop_acl('localhost.xml');
3 end;
4 /
begin
ERROR at line 1:
ORA-31001: Invalid resource handle or path name "/sys/acls/localhost.xml"
ORA-06512: at "XDB.DBMS_XDB", line 337
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 428
ORA-06512: at line 2
SQL> begin
2 dbms_network_acl_admin.create_acl('localhost.xml', 'ACL for 127.0.0.1', '&USERNAME', true, 'connect');
3 dbms_network_acl_admin.assign_acl('localhost.xml', '127.0.0.1');
4 end;
5 /
old 2: dbms_network_acl_admin.create_acl('localhost.xml', 'ACL for 127.0.0.1', '&USERNAME', true, 'connect');
new 2: dbms_network_acl_admin.create_acl('localhost.xml', 'ACL for 127.0.0.1', 'WEB_API', true, 'connect');
PL/SQL procedure successfully completed.
SQL> COMMIT
2 /
Commit complete.
SQL> GRANT XDB_WEBSERVICES TO &USERNAME
2 /
old 1: GRANT XDB_WEBSERVICES TO &USERNAME
new 1: GRANT XDB_WEBSERVICES TO WEB_API
Grant succeeded.
SQL> GRANT XDB_WEBSERVICES_OVER_HTTP TO &USERNAME
2 /
old 1: GRANT XDB_WEBSERVICES_OVER_HTTP TO &USERNAME
new 1: GRANT XDB_WEBSERVICES_OVER_HTTP TO WEB_API
Grant succeeded.
SQL> connect &USERNAME/&PASSWORD
Connected.
SQL> --
SQL> var url varchar2(700)
SQL> --
SQL> set pages 0 long 10000
SQL> --
SQL>
SQL> CREATE OR REPLACE TYPE ACCOUNT_O AS OBJECT
2 (
3 ACCOUNT_ID NUMBER(9, 0),
4 ACCOUNT_NUMBER VARCHAR2(100),
5 ACCOUNT_NAME VARCHAR2(50),
6 ACTIVE NUMBER(1, 0),
7 DEACTIVE_DATE DATE,
8 START_DATE DATE,
9 END_DATE DATE,
10 ROLLOVER_ACCOUNT_NUMBER VARCHAR2(100),
11 ROLLOVER_ACCOUNT_NAME VARCHAR2(50),
12 ROLLOVER_SPEED_CODE VARCHAR2(10),
13 LAST_UPDATE_DATE DATE
14 )
15 /
Type created.
SQL> CREATE OR REPLACE TYPE ACCOUNT_SK AS OBJECT( ACCOUNT_ID NUMBER(38) )
2 /
Type created.
SQL> CREATE OR REPLACE PACKAGE ACCOUNT_API AS
2 FUNCTION "NEW"(ACCOUNT_ID NUMBER,
3 ACCOUNT_NUMBER VARCHAR2,
4 ACCOUNT_NAME VARCHAR2 DEFAULT NULL,
5 ACTIVE NUMBER DEFAULT NULL,
6 DEACTIVE_DATE DATE DEFAULT NULL,
7 START_DATE DATE DEFAULT NULL,
8 END_DATE DATE DEFAULT NULL,
9 ROLLOVER_ACCOUNT_NUMBER VARCHAR2 DEFAULT NULL,
10 ROLLOVER_ACCOUNT_NAME VARCHAR2 DEFAULT NULL,
11 ROLLOVER_SPEED_CODE VARCHAR2 DEFAULT NULL,
12 LAST_UPDATE_DATE DATE DEFAULT NULL)
13 RETURN ACCOUNT_SK;
14 PROCEDURE "UPDATE"(ACCOUNT_ID NUMBER,
15 ACCOUNT_NUMBER VARCHAR2,
16 ACCOUNT_NAME VARCHAR2 DEFAULT NULL,
17 ACTIVE NUMBER DEFAULT NULL,
18 DEACTIVE_DATE DATE DEFAULT NULL,
19 START_DATE DATE DEFAULT NULL,
20 END_DATE DATE DEFAULT NULL,
21 ROLLOVER_ACCOUNT_NUMBER VARCHAR2 DEFAULT NULL,
22 ROLLOVER_ACCOUNT_NAME VARCHAR2 DEFAULT NULL,
23 ROLLOVER_SPEED_CODE VARCHAR2 DEFAULT NULL,
24 LAST_UPDATE_DATE DATE DEFAULT NULL);
25 PROCEDURE "DELETE"(ACCOUNT_ID NUMBER);
26 FUNCTION "GET"(ACCOUNT_ID NUMBER) RETURN ACCOUNT_O;
27 END ACCOUNT_API;
28 /
Package created.
SQL> BEGIN
2 :url := 'http://&USERNAME:&[email protected]:' || dbms_xdb.getHttpPort() || '/orawsv/&USERNAME/ACCOUNT_API';
3 end;
4 /
old 2: :url := 'http://&USERNAME:&[email protected]:' || dbms_xdb.getHttpPort() || '/orawsv/&USERNAME/ACCOUNT_API';
new 2: :url := 'http://WEB_API:[email protected]:' || dbms_xdb.getHttpPort() || '/orawsv/WEB_API/ACCOUNT_API';
PL/SQL procedure successfully completed.
SQL> print url
http://WEB_API:[email protected]:80/orawsv/WEB_API/ACCOUNT_API
SQL> --
SQL> select httpuritype( :url || '?wsdl' ).getXML() from dual
2 /
<definitions name="ACCOUNT_API" targetNamespace="http://xmlns.oracle.com/orawsv/
WEB_API/ACCOUNT_API" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://
xmlns.oracle.com/orawsv/WEB_API/ACCOUNT_API" xmlns:xsd="http://www.w3.org/2001/X
MLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types>
<xsd:schema targetNamespace="http://xmlns.oracle.com/orawsv/WEB_API/ACCOUNT_
API" elementFormDefault="qualified">
<xsd:element name="UPDATEInput">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="START_DATE-DATE-IN" minOccurs="0" maxOccurs="1" t
ype="xsd:date"/>
<xsd:element name="ROLLOVER_SPEED_CODE-VARCHAR2-IN" minOccurs="0" ma
xOccurs="1" type="xsd:string"/>
<xsd:element name="ROLLOVER_ACCOUNT_NUMBER-VARCHAR2-IN" minOccurs="0
" maxOccurs="1" type="xsd:string"/>
<xsd:element name="ROLLOVER_ACCOUNT_NAME-VARCHAR2-IN" minOccurs="0"
maxOccurs="1" type="xsd:string"/>
<xsd:element name="LAST_UPDATE_DATE-DATE-IN" minOccurs="0" maxOccurs
="1" type="xsd:date"/>
<xsd:element name="END_DATE-DATE-IN" minOccurs="0" maxOccurs="1" typ
e="xsd:date"/>
<xsd:element name="DEACTIVE_DATE-DATE-IN" minOccurs="0" maxOccurs="1
" type="xsd:date"/>
<xsd:element name="ACTIVE-NUMBER-IN" minOccurs="0" maxOccurs="1" typ
e="xsd:double"/>
<xsd:element name="ACCOUNT_NUMBER-VARCHAR2-IN" type="xsd:string"/>
<xsd:element name="ACCOUNT_NAME-VARCHAR2-IN" minOccurs="0" maxOccurs
="1" type="xsd:string"/>
<xsd:element name="ACCOUNT_ID-NUMBER-IN" type="xsd:double"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="UPDATEOutput">
<xsd:complexType>
<xsd:sequence>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="CACCOUNT_SK-NEWInput">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="START_DATE-DATE-IN" minOccurs="0" maxOccurs="1" t
ype="xsd:date"/>
<xsd:element name="ROLLOVER_SPEED_CODE-VARCHAR2-IN" minOccurs="0" ma
xOccurs="1" type="xsd:string"/>
<xsd:element name="ROLLOVER_ACCOUNT_NUMBER-VARCHAR2-IN" minOccurs="0
" maxOccurs="1" type="xsd:string"/>
<xsd:element name="ROLLOVER_ACCOUNT_NAME-VARCHAR2-IN" minOccurs="0"
maxOccurs="1" type="xsd:string"/>
<xsd:element name="LAST_UPDATE_DATE-DATE-IN" minOccurs="0" maxOccurs
="1" type="xsd:date"/>
<xsd:element name="END_DATE-DATE-IN" minOccurs="0" maxOccurs="1" typ
e="xsd:date"/>
<xsd:element name="DEACTIVE_DATE-DATE-IN" minOccurs="0" maxOccurs="1
" type="xsd:date"/>
<xsd:element name="ACTIVE-NUMBER-IN" minOccurs="0" maxOccurs="1" typ
e="xsd:double"/>
<xsd:element name="ACCOUNT_NUMBER-VARCHAR2-IN" type="xsd:string"/>
<xsd:element name="ACCOUNT_NAME-VARCHAR2-IN" minOccurs="0" maxOccurs
="1" type="xsd:string"/>
<xsd:element name="ACCOUNT_ID-NUMBER-IN" type="xsd:double"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="NEWOutput">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RETURN" type="tns:ACCOUNT_SKType"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="CACCOUNT_O-GETInput">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ACCOUNT_ID-NUMBER-IN" type="xsd:double"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="GETOutput">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RETURN" type="tns:ACCOUNT_OType"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="DELETEInput">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ACCOUNT_ID-NUMBER-IN" type="xsd:double"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="DELETEOutput">
<xsd:complexType>
<xsd:sequence>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:complexType name="ACCOUNT_SKType">
<xsd:sequence>
<xsd:element name="ACCOUNT_SK">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ACCOUNT_ID" type="xsd:double"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="ACCOUNT_OType">
<xsd:sequence>
<xsd:element name="ACCOUNT_O">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ACCOUNT_ID" type="xsd:double"/>
<xsd:element name="ACCOUNT_NUMBER">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="100"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ACCOUNT_NAME">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="50"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ACTIVE" type="xsd:double"/>
<xsd:element name="DEACTIVE_DATE" type="xsd:date"/>
<xsd:element name="START_DATE" type="xsd:date"/>
<xsd:element name="END_DATE" type="xsd:date"/>
<xsd:element name="ROLLOVER_ACCOUNT_NUMBER">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="100"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ROLLOVER_ACCOUNT_NAME">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="50"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ROLLOVER_SPEED_CODE">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LAST_UPDATE_DATE" type="xsd:date"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</types>
<message name="UPDATEInputMessage">
<part name="parameters" element="tns:UPDATEInput"/>
</message>
<message name="UPDATEOutputMessage">
<part name="parameters" element="tns:UPDATEOutput"/>
</message>
<message name="NEWInputMessage">
<part name="parameters" element="tns:CACCOUNT_SK-NEWInput"/>
</message>
<message name="NEWOutputMessage">
<part name="parameters" element="tns:NEWOutput"/>
</message>
<message name="GETInputMessage">
<part name="parameters" element="tns:CACCOUNT_O-GETInput"/>
</message>
<message name="GETOutputMessage">
<part name="parameters" element="tns:GETOutput"/>
</message>
<message name="DELETEInputMessage">
<part name="parameters" element="tns:DELETEInput"/>
</message>
<message name="DELETEOutputMessage">
<part name="parameters" element="tns:DELETEOutput"/>
</message>
<portType name="ACCOUNT_APIPortType">
<operation name="UPDATE">
<input message="tns:UPDATEInputMessage"/>
<output message="tns:UPDATEOutputMessage"/>
</operation>
<operation name="NEW">
<input message="tns:NEWInputMessage"/>
<output message="tns:NEWOutputMessage"/>
</operation>
<operation name="GET">
<input message="tns:GETInputMessage"/>
<output message="tns:GETOutputMessage"/>
</operation>
<operation name="DELETE">
<input message="tns:DELETEInputMessage"/>
<output message="tns:DELETEOutputMessage"/>
</operation>
</portType>
<binding name="ACCOUNT_APIBinding" type="tns:ACCOUNT_APIPortType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/ht
tp"/>
<operation name="UPDATE">
<soap:operation soapAction="UPDATE"/>
<input>
<soap:body parts="parameters" use="literal"/>
</input>
<output>
<soap:body parts="parameters" use="literal"/>
</output>
</operation>
<operation name="NEW">
<soap:operation soapAction="NEW"/>
<input>
<soap:body parts="parameters" use="literal"/>
</input>
<output>
<soap:body parts="parameters" use="literal"/>
</output>
</operation>
<operation name="GET">
<soap:operation soapAction="GET"/>
<input>
<soap:body parts="parameters" use="literal"/>
</input>
<output>
<soap:body parts="parameters" use="literal"/>
</output>
</operation>
<operation name="DELETE">
<soap:operation soapAction="DELETE"/>
<input>
<soap:body parts="parameters" use="literal"/>
</input>
<output>
<soap:body parts="parameters" use="literal"/>
</output>
</operation>
</binding>
<service name="ACCOUNT_APIService">
<documentation>Oracle Web Service</documentation>
<port name="ACCOUNT_APIPort" binding="tns:ACCOUNT_APIBinding">
<soap:address location="http://127.0.0.1/orawsv/WEB_API/ACCOUNT_API"/>
</port>
</service>
</definitions>But I think you said it was intermittant -
Inetd service/program crashes with core dump in Solaris 8 zone/container
I have developed a service in C that is launched from inetd when something comes on a specific port.
When a connection is opened to the port a core dump is created in the same directory where the executable file is located.
If you run the same service program from the command line everything is working perfect.
This is running in a Solaris 8 zone/container on a Solaris 10 machine.
Everything is set correctly in /etc/inetd.conf and in /etc/services.
I have even stripped down the program to a hello world program that is just printing a string to the screen and it is still crashing with a core dump.
# ldd test_srv
/usr/lib/secure/s8_preload.so.1
libc.so.1 => /usr/lib/libc.so.1
libdl.so.1 => /usr/lib/libdl.so.1
/usr/platform/SUNW,Sun-Fire-480R/lib/libc_psr.so.1
The same service is running on a Linux machine and on a Solaris 10 machine without zones/containers without any problems.
Can you please help me figure out what am I missing. Is there something specific with zones/containers that should be set / configured?
Do I have to set some specific env. variables to work in a Solaris 8 zone/container environment or is it something very simple that I'm missing?Could you please examine the truss log and advice what the problem is and how to fix it?
(some lines deleted)
bash-2.03# truss -f -p 18361 #### /usr/sbin/inetd -s -t &
18361: poll(0xFFBFF528, 53, -1) (sleeping...)
18361: poll(0xFFBFF528, 53, -1) = 1
18361: accept(63, 0xFFBFF870, 0xFFBFF914, 1) = 3
18361: sigprocmask(SIG_BLOCK, 0xFFBFF5F0, 0xFFBFF600) = 0
18361: lwp_sigtimedwait(0xFFBFF600, 0xFFBFF578, 0x00000010) = 0
18361: lwp_sigtimedwait(0xFFBFF568, 0xFFBFF728, 0x00000010) = 0
18361: fork() = 1921
1921: fork() (returning as child ...) = 18361
1921: sigprocmask(0, 0x00000000, 0xFFBFF600) = 0
18361: sigprocmask(0, 0x00000000, 0xFFBFF600) = 0
1921: lwp_sigtimedwait(0xFFBFF600, 0xFFBFF578, 0x00000010) = 0
18361: sigprocmask(SIG_SETMASK, 0xFFBFF5F0, 0xFFBFF600) = 0
18361: close(3) = 0
18361: sigprocmask(0, 0x00000000, 0xFFBFF600) = 0
1921: lwp_sigtimedwait(0xFFBFF668, 0xFFBFF528, 0x00000020) = 0
1921: sigaction(SIGHUP, 0xFFBFF528, 0xFFBFF500) = 0
18361: lwp_sigtimedwait(0xFFBFF568, 0xFFBFF5F0, 0x00000010) = 0
1921: lwp_sigtimedwait(0xFFBFF508, 0xFFBFF458, 0x00000010) = 0
18361: sigprocmask(SIG_SETMASK, 0xFFBFF5F0, 0xFFBFF600) = 0
1921: sigprocmask(SIG_SETMASK, 0xFFBFF5F0, 0xFFBFF600) = 0
1921: lwp_sigtimedwait(0xFFBFF600, 0xFFBFF578, 0x00000010) = 0
1921: lwp_sigtimedwait(0xFFBFF568, 0xFFBFF728, 0x00000010) = 0
1921: fcntl(3, F_DUP2FD, 0x00000000) = 0
1921: close(3) = 0
1921: fcntl(0, F_DUP2FD, 0x00000001) = 1
1921: fcntl(0, F_DUP2FD, 0x00000002) = 2
1921: open64("/etc/.name_service_door", O_RDONLY) = 3
1921: fcntl(3, F_SETFD, 0x00000001) = 0
1921: door_info(3, 0xFF0C2748) = 0
1921: door_call(3, 0xFFBFF278) = 0
1921: close(67) Err#9 EBADF
1921: close(66) Err#9 EBADF
1921: close(65) Err#9 EBADF
1921: close(64) Err#9 EBADF
1921: close(63) = 0
1921: close(62) = 0
1921: close(12) = 0
1921: close(11) = 0
1921: close(10) Err#9 EBADF
1921: close(9) Err#9 EBADF
1921: close(8) Err#9 EBADF
1921: close(7) Err#9 EBADF
1921: close(6) Err#9 EBADF
1921: close(5) Err#9 EBADF
1921: close(4) Err#9 EBADF
1921: setrlimit(RLIMIT_NOFILE, 0xFFBFFD20) = 0
1921: xenix(398872, 0xFFBFF5E4, 0x00000040) = 38
1921: execve("/tmp/srv/t_srv", 0x0008B5FC, 0xFFBFFDA0) argc = 0
1921: getuid() = 0 [0]
1921: resolvepath("/usr/lib/ld.so.1", "/usr/lib/ld.so.1", 1023) = 16
1921: open("/var/ld/ld.config", O_RDONLY) = 3
1921: fstat(3, 0xFFBFF5E8) = 0
1921: mmap(0x00000000, 148, PROT_READ, MAP_SHARED, 3, 0) = 0xFF3E0000
1921: close(3) = 0
1921: stat("/usr/lib/libc.so.1", 0xFFBFF648) = 0
1921: resolvepath("/usr/lib/libc.so.1", "/usr/lib/libc.so.1", 1023) = 18
1921: open("/usr/lib/libc.so.1", O_RDONLY) = 3
1921: mmap(0x00000000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0xFF340000
1921: mmap(0x00000000, 802816, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFF200000
1921: mmap(0xFF200000, 703520, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF200000
1921: mmap(0xFF2BC000, 24772, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 704512) = 0xFF2BC000
1921: munmap(0xFF2AC000, 65536) = 0
1921: memcntl(0xFF200000, 113528, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
1921: close(3) = 0
1921: stat("/usr/lib/libdl.so.1", 0xFFBFF648) = 0
1921: resolvepath("/usr/lib/libdl.so.1", "/usr/lib/libdl.so.1", 1023) = 19
1921: open("/usr/lib/libdl.so.1", O_RDONLY) = 3
1921: mmap(0xFF340000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF340000
1921: mmap(0x00000000, 8192, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFF330000
1921: mmap(0xFF330000, 2638, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF330000
1921: close(3) = 0
1921: stat("/usr/platform/SUNW,Sun-Fire-480R/lib/libc_psr.so.1", 0xFFBFF368) = 0
1921: resolvepath("/usr/platform/SUNW,Sun-Fire-480R/lib/libc_psr.so.1", "/usr/platform/sun4u-us3/lib/libc_psr.so.1", 1023) = 41
1921: open("/usr/platform/SUNW,Sun-Fire-480R/lib/libc_psr.so.1", O_RDONLY) = 3
1921: mmap(0xFF340000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF340000
1921: close(3) = 0
1921: mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF320000
1921: dup(0) = 3
1921: llseek(0, 0, SEEK_CUR) Err#29 ESPIPE
1921: close(0) = 0
1921: fcntl(3, F_DUP2FD, 0x00000000) = 0
1921: close(3) = 0
1921: dup(1) = 3
1921: close(1) = 0
1921: fcntl(3, F_DUP2FD, 0x00000001) = 1
1921: close(3) = 0
1921: dup(2) = 3
1921: close(2) = 0
1921: fcntl(3, F_DUP2FD, 0x00000002) = 2
1921: close(3) = 0
1921: sys#177(0x00000080, 0xFFBFFB7C, 0xFF3F0518, 0x00000000, 0xFF3C2EF8, 0xFF2C0284) = 0x00000000 [0xFFBFFB7C]
1921: sys#227(0x00000006, 0x00000000, 0x0001ADF0, 0xFF3F0518, 0xFF3C3C18, 0xFF3C2670) = 0x0000000C [0x00000000]
1921: sys#227(0x00000002, 0x0000000C, 0x0000000E, 0xFFBFFCAE, 0x00000002, 0xFF3C2670) = 0x00000002 [0x00000000]
1921: Incurred fault #6, FLTBOUNDS %pc = 0xFF232E2C
1921: siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000
1921: Received signal #11, SIGSEGV [default]
1921: siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000
1921: *** process killed ***
18361: Received signal #18, SIGCLD, in poll() [caught]
18361: siginfo: SIGCLD CLD_DUMPED pid=1921 status=0x000B
18361: poll(0xFFBFF528, 53, -1) Err#4 EINTR
18361: lwp_sigtimedwait(0xFFBFF218, 0xFFBFF140, 0x00000010) = 0
18361: lwp_sigtimedwait(0xFFBFF130, 0xFFBFF218, 0x00000010) = 0
18361: sigprocmask(0, 0x00000000, 0xFFBFEF28) = 0
18361: poll(0xFFBFF528, 53, -1) (sleeping...)Thank you in advance -
Core Dump when installing SAP Integration Kit Fix Pack 3.1
When installing the SAP Integration Kit Fix Pack 3.1 we are getting the following error message..
boperl.sh[88]: 9961568 Memory Fault (Core Dump)
This install is being done on AIX after the SP3 was installed.
Any ideas?
Thanks,
DeeptiDO you install the SP3 full version of the integration Kit?
Regards,
Stratos -
JOB RSGENYTT - System core dump
Hi SDN,
While trying to upgrade our 4.6B system to ERP, JOB_RSGENYTT phase stops with a core dump, this is what i've in ST22
Someone knows how i can analyse this :S
regards
Pedro Rodrigues
ABAP runtime errors SYSTEM_CORE_DUMPED
Occurred on 17.11.2007 at 19:53:23
Process terminated by signal 0.
What happened?
Error in the SAP Basis system
ABAP/4 processor detected an internal system error.
The current ABAP program "RSGENYTT " had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
Please make a note of the actions and input which caused the error.
Please make a note of the actions and input which caused the error.
To resolve the problem, contact your
SAP system administrator.
Choose "Print" for a hard coopy of the termination message. You can
display and adminster short dump messages using Transaction ST22.
Error analysis
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server appserver_DEV_00 on host appserver (wp 0)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 8628
The error reported by the operating system is:
Error number..... " "
Error text....... " "
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "46B"
Application server....... "appserver"
Network address.......... "192.39.0.2"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 80686"
Database server.......... "appserver"
Database type............ "MSSQL"
Database name............ "DEV"
Database owner........... "dev"
Character set............ "English_United State"
SAP kernel............... "46D"
Created on............... "Aug 16 2007 21:26:12"
Created in............... "NT 4.0 1381 Service Pack 6 x86 MS VC++ 12.00"
Database version......... "SQL_Server_7.00 "
Patch level.............. "2337"
Patch text............... " "
Supported environment....
Database................. "MSSQL 6.5.213 or higher, MSSQL 7.0.1 or higher"
SAP database version..... "46D"
Operating system......... "Windows NT 4.0, Windows NT 5.0, Windows NT 5.1,
Windows NT 5.2, , System build information:,
, LCHN : "
User, transaction...
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... "SE38 "
Program............. "RSGENYTT "
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where termination occurred
The termination occurred in the ABAP/4 program "RSGENYTT " in
The main program was "RSGENYTT ".
The termination occurred in line 0
of the source code of program " " (when calling the editor 00).
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 1260
SY-FDPOS 0 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1....+....2....+....3....+....4
LV_COUNT 0
0000
0000
LV_INDEX 0
0000
0000
LT_DDYTT Table[initial]
0000FFFD
0000FFFF
LT_DDYTF Table[initial]
0000FFFD
0000FFFF
LT_PUTTB_SHD ############################ #######ï###
000000000000000000000000000020000000E000
00000000000000000000000040000A001000F400
... + 40 ####ð###ð###################$###xæ-?ð#/?
1000F000F000000000008000000020007E23F823
00000800040000000000C0002000430086DF02FF
... + 80 #?4?########################5###
93330000000000000000000000003000
8F4F0000000000000000000000005000
LS_PUTTB_SHD /BEV1/CADD03VTV
2445324444335552222222222222222222222222
F2561F3144036460000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80 002 7
2222222222222222333222222222222222232222
0000000000000000002000000000000000070000
... + 120 VLE
22222544
000006C
LV_SHD_DDXTT DDXTT~
445557222222222222222222222222
44844E000000000000000000000000
GC_BASREL_UPDATED U
5
5
LS_PUTTB_SHD-TABNAME /BEV1/CADD03VTV
244532444433555222222222222222
F2561F314403646000000000000000
LS_DDYTT ######
2222222222222222222222222222222222000000
0000000000000000000000000000000000000000
... + 40 ##########
0000000000222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80 ##########
2222222222220000000000222222222222222222
0000000000000000000000000000000000000000
... + 120 ###### #########
22222222
0000000
SYST ############ï###########################
000000000000E000000000000000000000000000
000000001000F400000000000000000000000000
... + 40 ì#######################################
E000000000000000000000000000000000008000
C40000001000000010000000000000000000C000
... + 80 ########################################
0000000000000000000000000000000000000000
0000000000000000200000000000000000000000
... + 120 ########################################
00000000
0000000
SY-SUBRC 0
0000
0000
%_SSCR[] ############################`###########
0000000000000000000000000000600000000000
0000000000000000000000004000030000000000
... + 40 ################ÿÿÿÿ####################
1000000000000000FFFF00000000000000000000
0000000000001000FFFF41F07000430000000000
... + 80 ################################
00000000000000000000000000000000
00000000000000000000000000000000
10032c92 807d1400 cmp byte ptr ,0x0 ss:062ce90a=00
10032c96 7422 jz dsql_db_init+0x30d0a (10032cba)
10032c98 394e08 cmp ,ecx ds:070aeb72=????????
10032c9b 751d jnz dsql_db_init+0x30d0a (10032cba)
10032c9d 8d047f lea eax,[edi+edi*2] ds:00000000=????????
10032ca0 c1e003 shl eax,0x3
10032ca3 8bd0 mov edx,eax
10032ca5 8b4518 mov eax,[ebp+0x18] ss:062ce90a=00000000
10032ca8 2bc2 sub eax,edx
10032caa 99 cdq
FAULT-> 10032cab f7fb idiv ebx
10032cad 0fbfd0 movsx edx,ax
10032cb0 eb0b jmp dsql_db_init+0x30d0d (10032cbd)
10032cb2 6a02 push 0x2
10032cb4 58 pop eax
10032cb5 e9df040000 jmp dsql_db_init+0x311e9 (10033199)
10032cba 6a01 push 0x1
10032cbc 5a pop edx
10032cbd 803dd95a1d1000 ds:101d5ad9=00
cmp byte ptr ,0x0
10032cc4 7409 jz dsql_db_init+0x30d1f (10032ccf)
10032cc6 833dac591d1006 ds:101d59ac=00000006
cmp dword ptr ,0x6
10032ccd 7416 jz dsql_db_init+0x30d35 (10032ce5)
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
031688dc 1000d5df 00000000 018b4eb8 00000000 00000001 dbmssslib!dsql_db_init
03168978 10001cb3 03f41f80 018b6470 018b4eb8 00000035 dbmssslib!dsql_db_init
031689c4 008f47dc 010035d0 00000035 00000001 018b6470 dbmssslib!DbSlVersion
031689f4 008f1120 00000001 00000000 3f2db20c 00000000 disp+work!
054fffb8 77e64829 03e7bf20 00000000 00000000 03e7bf20 MSVCRT!endthreadex
054fffec 00000000 77bcb4bc 03e7bf20 00000000 00000000 kernel32!GetModuleHandleA
List of ABAP programs affected
Type Program Gen. date time LoadSize RollSize
Prg RSGENYTT 17.11.2007 18:56:44 112 3 840 loade
Prg SAPMSSY0 26.03.2001 12:10:18 1 6 512 loade
Prg RSDBRUNT 26.03.2001 12:09:07 19 22 376 loade
Prg RSDBSPBL 26.03.2001 11:21:26 24 6 512 loade
Prg SAPDB__S 01.06.1999 12:10:01 36 1 408 loade
Prg RSDBSPMC 01.06.1999 12:09:54 34 7 728 loade
Typ DDSHDESCR 03.09.1997 03:05:16 955 048 loade
Typ SPPARAMS 07.05.1997 13:10:38 956 024 loade
Prg SAPLSABE 01.06.1999 12:10:15 100 1 288 loade
Prg SAPLSECU 04.04.2001 18:30:22 28 6 608 loade
Prg SAPMSSY3 26.03.2001 10:57:11 269 5 368 loade
Typ ABDBG 25.05.1999 15:31:57 716 1 360 loade
Prg SAPMSSYD 22.03.2001 18:03:09 12 1 336 loade
Prg SAPFSPOR 19.10.1999 09:39:27 59 216 loade
Prg SAPLSCNT 01.06.1999 12:10:15 15 2 624 loade
Prg SAPLSVSM 22.03.2001 17:23:10 61 2 552 loade
Prg SAPLSGUI 26.03.2001 12:08:56 4 3 768 loade
Prg SAPLSTTM 22.03.2001 15:09:40 2 5 392 loade
Prg SAPLSBDC 22.03.2001 15:09:07 6 6 560 loade
Prg CL_DATAPROVIDER=============== 22.03.2001 16:53:29 62 4 128 loade
Typ OBJ_RECORD 14.02.1998 08:30:43 883 048 loade
Prg SAPLSTUP 26.03.2001 11:45:52 16 9 160 loade
Prg SAPLCNDP 26.03.2001 10:57:04 3 15 744 loade
Prg SAPSHDTV 26.03.2001 11:45:07 14 3 864 loade
Prg SAPFGUICNTL 26.03.2001 10:42:02 10 1 408 loade
Prg CL_GUI_CFW==================== 26.03.2001 11:21:21 11 13 192 loade
Prg SAPLOLEA 17.11.2007 13:23:33 5 7 656 loade
Prg SAPLSFES 26.03.2001 12:08:50 7 10 544 loade
Prg SAPLGRFC 22.03.2001 15:08:46 60 1 384 loade
Prg SAPLSTRF 17.11.2007 13:23:33 217 10 424 loade
Prg SAPLSTFI 26.03.2001 12:10:04 216 5 296 loade
Prg SAPLSUGI 17.11.2007 18:56:44 673 35 280 loade
Typ PUTTB_SHD 17.11.2007 11:26:20 682 120 loade
Prg SAPLSUGN 17.11.2007 18:56:44 691 5 296 loade
Typ DDFTX 05.11.1997 02:52:59 224 072 loade
Prg SAPLSDNT 17.11.2007 18:56:44 135 18 368 loade
Prg SAPLSDB1 17.11.2007 11:26:20 114 6 464 loade
Prg SDB1FMSS 04.04.2001 18:30:57 113 4 104 loade
Typ DDXTT 17.11.2007 18:56:44 235 048 loade
Prg RDTCMPTB 17.11.2007 18:56:44 414 10 376 loade
Prg SAPLSDB2 17.11.2007 18:56:44 225 39 216 loade
Prg SAPLSDB3 17.11.2007 18:56:44 271 9 136 loade
Prg SAPLSDD0 17.11.2007 13:23:33 133 5 200 loade
Prg RADIXTOL 01.06.1999 12:09:34 150 2 504 loade
Prg SDB2FDBS 17.11.2007 17:43:27 215 11 784 loade
Prg SAPLSDD2 01.06.1999 12:10:16 237 3 888 loade
Prg SDB2FMSS 17.11.2007 17:43:27 190 17 152 loade
Typ UVERS 16.07.1997 14:46:33 347 072 loade
Typ DD092526V 20.08.1998 11:15:55 781 048 loade
Typ X030L 05.11.1997 03:07:56 709 096 loade
Prg RADBTOUT 01.06.1999 12:09:34 124 10 448 loade
Prg SAPCNVE 01.06.1999 12:10:01 101 168 loade
Prg SAPLSDAD 17.11.2007 18:56:44 935 71 752 loade
List of internal tables
Header of PROG=RSGENYTTDATA=GT_PROT[]
TABH+ 0(20) = 0000000000000000000000000000000000000000
TABH+ 20(20) = 0000000004000000500700000000000007000000
TABH+ 40(20) = 1E0000001E0000001E0000001E000000FFFFFFFF
TABH+ 60(20) = E3000000020000000403000018972D3F00000000
TABH+ 80(20) = 0000000000000000000000000000000000000000
TABH+100(12) = 000000000000000013000000
id = 19 (0x13000000)
fill = 7 (0x07000000)
lineAdmin = 30 (0x1E000000)
lineAlloc = 30 (0x1E000000)
tabi = 0x18972D3F
pghook = 0x00000000
index = 0x00000000
hshook = 0x00000000
btree = 0x00000000
reghook = 0x00000000
lopc = 0 (0x00000000)
occu = 30 (0x1E000000)
rank = 30 (0x1E000000)
loop = -1 (0xFFFFFFFF)
leng = 227 (0xE300)
fcnt = 0 (0x0000)
lock = 0
shrd = 0
access = 1 (stdAccess)
idxKind = 0 (noIndex)
unique = 2 (nonUnique)
cmpMode = 2 (cmpSingleMcmp)
pb_func = 0x00000000
pb_handle = 0x00000000
Directory of application tables (contents)
Program
Name.......... Contents.1........2........3....+....
Directory of data areas (administration information)
Program
No.. Name.......... Lgth Ofsg Type Next Gen date Gen time
SYST
L not assigned 751 0 IN
M /%_LISTTABLE 750 1 CO 0
T global stack 749 1 2 GL
RSGENYTT
A global data 0 3 DA
L constant dat 1 4 LI .0 .0472
L constant dat 2 5 LI .0 .0367
L not assigned 3 6 IN
L SYST 4 7 TA 00
L SY 5 8 TA
L RSJOBINFO 6 9 TA
M /%_SYS%% 7 0 CO
M field symbol 8 1 FS
M /%_SSCR 9 2 CO 0
L VARI 10 3 TA
L PUTTB_SHD 11 4 TA
L DDYTT 12 5 TA
L DDYTF 13 6 TA
M field symbol 14 7 FS
M field symbol 15 8 FS
M field symbol 16 9 FS
SAPMSSY0
A global data 0 0 DA
L constant dat 1 1 LI .0 .077E
L constant dat 2 2 LI .0 .06B8
L not assigned 3 3 IN
L SYST 4 4 TA
L SY 5 5 TA
L RSJOBINFO 6 6 TA
M /%_SYS%% 7 7 CO
M field symbol 8 8 FS
M /%_LISTTABLE 9 9 CO
M /%_SYS000 10 0 CO
L TFDIR 11 1 TA
M field symbol 12 2 FS
M field symbol 13 3 FS
L TRDIR 14 4 TA
L ABMSG 15 5 TA
M field symbol 16 6 FS
L text pool 17 7 TP
RSDBRUNT
A global data 0 8 DA
L constant dat 1 9 LI .0 .1B8A
L constant dat 2 0 LI .0 .1780
L not assigned 3 1 IN
L SYST 4 2 TA
L SY 5 3 TA
L RSJOBINFO 6 4 TA
M /%_SYS%% 7 5 CO
M field symbol 8 6 FS
M /%_SSCR 9 7 CO
L VARI 10 8 TA
L TRDIR 11 9 TA
L TUVID 12 0 TA
L RSVUVINT 13 1 TA
L VARID 14 2 TA
L DFIES 15 3 TA
L SSCRTEXTS 16 4 TA
L SSCRFIELDS 17 5 TA
M /%_DYN_SEL 18 6 CO
M /%_FIELD_SEL 19 7 CO
M /%_RUNT_XX_% 20 8 CO
M field symbol 21 9 FS
M field symbol 22 0 FS
M field symbol 23 1 FS
M field symbol 24 2 FS
M field symbol 25 3 FS
L text pool 26 4 TP
RSDBSPBL
A global data 0 5 DA
L constant dat 1 6 LI .0 .09CE
L constant dat 2 7 LI .0 .0908
L not assigned 3 8 IN
L SYST 4 9 TA
L SY 5 0 TA
L RSJOBINFO 6 1 TA
M /%_SYS%% 7 2 CO
M field symbol 8 3 FS
M /%_RUNT_XX_% 9 4 CO
L text pool 10 5 TP
SAPDB__S
A global data 0 6 DA
L constant dat 1 7 LI .0 .020D
L constant dat 2 8 LI .0 .01B0
L not assigned 3 9 IN
L SYST 4 0 TA
L SY 5 1 TA
L RSJOBINFO 6 2 TA
M /%_SYS%% 7 3 CO
M field symbol 8 4 FS
M /%_SSCR 9 5 CO
L VARI 10 6 TA
L text pool 11 7 TP
A global data 12 8 DA 0
RSDBSPMC
A global data 0 9 DA
L constant dat 1 0 LI .0 .0BD7
L constant dat 2 1 LI .0 .0AE8
L not assigned 3 2 IN
L SYST 4 3 TA
L SY 5 4 TA
L RSJOBINFO 6 5 TA
M /%_SYS%% 7 6 CO
M field symbol 8 7 FS
M /%_SSCR 9 8 CO
M /%_RUNT_XX_% 10 9 CO
1 L DD23L 11 0 TA
1 L DD23T 12 1 TA
1 L RSMDY 13 2 TA
1 M field symbol 14 3 FS
1 L text pool 15 4 TP
SAPLSABE
1 A global data 0 5 DA
1 L constant dat 1 6 LI .0 .014A
1 L constant dat 2 7 LI .0 .0101
1 L not assigned 3 8 IN
1 L SYST 4 9 TA
1 L SY 5 0 TA
1 L RSJOBINFO 6 1 TA
1 M /%_SYS%% 7 2 CO
1 M field symbol 8 3 FS
1 L TRDIR 9 4 TA
1 M field symbol 10 5 FS
1 L text pool 11 6 TP
SAPLSECU
1 A global data 0 7 DA
1 L constant dat 1 8 LI .0 .0918
1 L constant dat 2 9 LI .0 .070B
1 L not assigned 3 0 IN
1 L SYST 4 1 TA
1 L SY 5 2 TA
1 L RSJOBINFO 6 3 TA
1 M /%_SYS%% 7 4 CO
1 M field symbol 8 5 FS
1 L TSL1D 9 6 TA
1 L TPFYPROPTY 10 7 TA
1 M field symbol 11 8 FS
1 L text pool 12 9 TP
RSGENYTT
1 L ABDBG 127 0 TA
SAPMSSY3
1 A global data 0 1 DA
1 L constant dat 1 2 LI .0 .0A38
1 L constant dat 2 3 LI .0 .09BF
1 L not assigned 3 4 IN
1 L SYST 4 5 TA
1 L SY 5 6 TA
1 L RSJOBINFO 6 7 TA
1 M /%_SYS%% 7 8 CO
1 M field symbol 8 9 FS
1 M /%_LISTTABLE 9 0 CO
1 M /%_SYS000 10 1 CO
1 L ABDBG 11 2 TA
1 M field symbol 12 3 FS
1 Y 13 4 LA 0
1 Y 14 5 LA 0
1 Y 15 6 LA 0
1 Y 16 7 LA 0
1 Y 17 8 LA 0
1 Y 18 9 LA 0Hi lucio,
thanks for your quick answer, update of DW didn't work, here you are dev_w22 trace
trc file: "dev_w22", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Nov 19 18:30:29 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' ...
B Library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' loaded
B Version of library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' is "46D.00", patchlevel (0.2328)
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 2352
M intno 0
M pid 5400
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc22 5400) [dpxxdisp.c 976]
I MtxInit: -2 0 0
I
I Mon Nov 19 18:30:31 2007
I *** ERROR => New Process with the same PID
ERROR_INVALID_ADDRESS: Attempt to access invalid address. [semnt.c 1513]
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M ThSysUsrCheck: clear T22
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 2328
C patchcomment MSSQL: Transaction inconsistencies HOTNEWS (1067103)
C SQLOLEDB Provider Release:08.10.3959
C Using shared procedure name cache (APPSERVER_DEVDEV_MEM,1320040 bytes,10000 procs) initialized by another process
C Using shared TEMP procedure cache (APPSERVER_DEVDEV_TSP,7040024 bytes,10000 procs) initialized by another process
C Connected to db server : [appserver], dbname: DEV, dbuser: dev
B Connection 0 opened
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE NO YES NO 20071119 183031
M db_connect o.k.
I MtxInit: 22 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 22, WP_CNT = 31
B dbtbxbuf: Buffer TABL (addr: 0BA400C8, size: 6000000, end: 0BFF8E48)
B dbexpbuf: Buffer EIBUF (addr: 0C2100D0, size: 4194304, end: 0C6100D0)
B dbexpbuf: Buffer CUA (addr: 0C6200D0, size: 3072000, end: 0C90E0D0)
M rdisp/reinitialize_code_page -> 0
M rdisp/hold_keeps_time_slice -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M PfReadDBVersion: use compatibility mode for stat-files
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 07D86F10
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0D760098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0D760798
S using messages for server info
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A Attached to PXA (address 28230040, size 154674K)
A abap/pxa = shared
A PXA INITIALIZATION FINISHED
A -PXA--
A
A RFC rfc/dump_client_info not set, use default -1
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC rfc/bc_no_gui_cp_refresh not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M SsfSapSecin: putenv(SECUDIR=D:\usr\sap\DEV\DVEBMGS00\sec): ok
M
M =================================================
M === SSF INITIALIZATION:
M ===...SSF Security Toolkit name SAPSECULIB .
M ===...SSF trace level is 0 .
M ===...SSF library is D:\usr\sap\DEV\SYS\exe\run\sapsecu.dll .
M ===...SSF hash algorithm is SHA1 .
M ===...SSF symmetric encryption algorithm is DES-CBC .
M ===...sucessfully completed.
M =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
B
B Mon Nov 19 18:40:15 2007
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:46D.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * = 0x0,
B use_hints = abap->1, dbif->1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
C The IRow interface is supported by this OLEDB provider
M
M Mon Nov 19 18:40:18 2007
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000094) [dpnttool.c 390]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000094 (Divide by zero)
App : disp+work.EXE (pid=5400)
When : 11/19/2007 18:40:18.134
Threads : 2
Computer Name : APPSERVER
User Name : SAPServiceDEV
Number of Processors: 4
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
Stack Dump for Thread Id 151c
eax=0000a000 ebx=00000000 ecx=00000000 edx=00000000 esi=03f48b54 edi=00000000
eip=10032cab esp=031688b0 ebp=031688dc iopl=0 nv up ei pl nz na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010206
function : <nosymbols>
10032c92 807d1400 cmp byte ptr [ebp+0x14],0x0 ss:062cfc7a=00
10032c96 7422 jz dsql_db_init+0x30d0a (10032cba)
10032c98 394e08 cmp [esi+0x8],ecx ds:070afef2=????????
10032c9b 751d jnz dsql_db_init+0x30d0a (10032cba)
10032c9d 8d047f lea eax,[edi+edi*2] ds:00000000=????????
10032ca0 c1e003 shl eax,0x3
10032ca3 8bd0 mov edx,eax
10032ca5 8b4518 mov eax,[ebp+0x18] ss:062cfc7a=00000000
10032ca8 2bc2 sub eax,edx
10032caa 99 cdq
FAULT-> 10032cab f7fb idiv ebx
10032cad 0fbfd0 movsx edx,ax
10032cb0 eb0b jmp dsql_db_init+0x30d0d (10032cbd)
10032cb2 6a02 push 0x2
10032cb4 58 pop eax
10032cb5 e9df040000 jmp dsql_db_init+0x311e9 (10033199)
10032cba 6a01 push 0x1
10032cbc 5a pop edx
10032cbd 803dd95a1d1000 ds:101d5ad9=00
cmp byte ptr [EndFastload+0x19644f (101d5ad9)],0x0
10032cc4 7409 jz dsql_db_init+0x30d1f (10032ccf)
10032cc6 833dac591d1006 ds:101d59ac=00000006
cmp dword ptr [EndFastload+0x196322 (101d59ac)],0x6
10032ccd 7416 jz dsql_db_init+0x30d35 (10032ce5)
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
031688dc 1000d5df 00000000 018b76f0 00000000 00000001 dbmssslib!dsql_db_init
03168978 10001cb3 03f41f90 018b8ca8 018b76f0 00000035 dbmssslib!dsql_db_init
031689c4 008f4765 010056b8 00000035 00000001 018b8ca8 dbmssslib!DbSlVersion
031689f4 008f10a9 00000001 00000000 3f26827c 00000000 disp+work!<nosymbols>
03168a74 008f05ff 00000000 3f26827c 00000000 3f2682ec disp+work!<nosymbols>
03168a9c 008a2873 00000000 018b769c 3f2682ec 00000000 disp+work!<nosymbols>
03168b48 0089ef88 00000000 3f26827c 3f2682ec 03168d0c disp+work!<nosymbols>
03168b5c 008a1714 3f261654 00000000 00000000 00000000 disp+work!<nosymbols>
03168d0c 0089d4ec 00000000 3f26827c 3f2682ec 00000000 disp+work!<nosymbols>
03168ea0 0061f5f7 00000000 3f26827c 3f2682ec ffffffff disp+work!<nosymbols>
03168edc 00616212 00000007 03168ef8 0316f130 00000000 disp+work!<nosymbols>
03168f1c 005bf6a0 00000008 29339f2c 00000000 3f2918e0 disp+work!<nosymbols>
0316f140 00629e43 00000000 00000000 0316f170 00000001 disp+work!<nosymbols>
00e5bc44 00000000 49444553 00000000 4f525f25 0000544f disp+work!<nosymbols>
Stack Dump for Thread Id 5f4
eax=00000001 ebx=00000103 ecx=7c829f59 edx=00380000 esi=00000000 edi=00000000
eip=7c8285ec esp=054ffc74 ebp=054ffcb8 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c8285ec c3 ret
7c8285ed 8da42400000000 lea esp,[esp] ss:054ffc74=7c8270fb
7c8285f4 8d642400 lea esp,[esp] ss:08667013=00000000
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
054ffcb8 00c3475c 00000688 00000000 00000000 03e7be00 ntdll!KiFastSystemCallRet
054fff84 77bcb530 00000000 00000000 00000000 03e7be98 disp+work!<nosymbols>
054fffb8 77e64829 03e7be98 00000000 00000000 03e7be98 MSVCRT!endthreadex
054fffec 00000000 77bcb4bc 03e7be98 00000000 00000000 kernel32!GetModuleHandleA
M -
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 4, th_errno 11, action 4)
M
M Info for wp 22
M
M stat = 4
M reqtype = 4
M act_reqtype = 4
M tid = 22
M mode = 0
M len = 24
M rq_id = 139
M rq_source = 1
M rq_info = 8576
M last_tid = 22
M last_mode = 0
M int_checked_resource = 0
M ext_checked_resource = 0
M report = > <
M action = 0
M tab_name = > <
M
M Modeinfo for User T22/M0
M
M tm state = 2
M uid = 23
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >DDIC <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M blockSoftCanel = NO
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 1
M roll state = 4
M abap state = 4
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = NULL
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server appserver_DEV_00 on host appserver (wp 22)
M * ERROR ThSigHandler: signal
M *
M * TIME Mon Nov 19 18:40:18 2007
M * RELEASE 46D
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 8628
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALL_HOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M Entering ThSetStatError
M *** WARNING => sql break failed (-1)
M ThErrHandle: don't try rollback again
M ThErrHandle: call ThrCoreInfo
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
C HandleOledbError [RpcExec,line 22204]: Error/Message: (err 8144, sev 0), Procedure or function ##Y8APPSERVEDEV00000054000000000014183031 has too many arguments specified.
C RpcExec failed. HR 80040e14 DBSL retcode 99. proc: [##Y8APPSERVEDEV00000054000000000014183031]
C HandleOledbError [RpcExec,line 22204]: Error/Message: (err 8144, sev 0), Procedure or function ##Y8APPSERVEDEV00000054000000000014183031 has too many arguments specified.
C RpcExec failed. HR 80040e14 DBSL retcode 99. proc: [##Y8APPSERVEDEV00000054000000000014183031]
C retry with SQL statement string
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_RETURN
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
B Disconnecting from ALL connections:
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 022 000 R/3 000000 ACTIVE YES YES NO 20071119 183031
B Disconnected from connection 0
B statistics db_con_commit (com_total=5, com_forced=1, com_tx=1)
B statistics db_con_rollback (roll_total=0, roll_forced=0, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc22 5400) [dpnttool.c 310]
M return from clean-up function ...
trc file: "dev_w22", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Nov 19 18:40:34 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' ...
B Library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' loaded
B Version of library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' is "46D.00", patchlevel (0.2328)
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 2352
M intno 0
M pid 432
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc22 432) [dpxxdisp.c 976]
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 2328
C patchcomment MSSQL: Transaction inconsistencies HOTNEWS (1067103)
C SQLOLEDB Provider Release:08.10.3959
C Using shared procedure name cache (APPSERVER_DEVDEV_MEM,1320040 bytes,10000 procs) initialized by another process
C Using shared TEMP procedure cache (APPSERVER_DEVDEV_TSP,7040024 bytes,10000 procs) initialized by another process
C Connected to db server : [appserver], dbname: DEV, dbuser: dev
B Connection 0 opened
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE NO YES NO 20071119 184034
M db_connect o.k.
I MtxInit: 22 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 22, WP_CNT = 31
B dbtbxbuf: Buffer TABL (addr: 0BA400C8, size: 6000000, end: 0BFF8E48)
B dbexpbuf: Buffer EIBUF (addr: 0C2100D0, size: 4194304, end: 0C6100D0)
B dbexpbuf: Buffer CUA (addr: 0C6200D0, size: 3072000, end: 0C90E0D0)
M rdisp/reinitialize_code_page -> 0
M rdisp/hold_keeps_time_slice -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M PfReadDBVersion: use compatibility mode for stat-files
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 07D86BF0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0D760098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0D760798
S using messages for server info
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A Attached to PXA (address 28230040, size 154674K)
A abap/pxa = shared
A PXA INITIALIZATION FINISHED
A -PXA--
A
A RFC rfc/dump_client_info not set, use default -1
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC rfc/bc_no_gui_cp_refresh not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M SsfSapSecin: putenv(SECUDIR=D:\usr\sap\DEV\DVEBMGS00\sec): ok
M
M =================================================
M === SSF INITIALIZATION:
M ===...SSF Security Toolkit name SAPSECULIB .
M ===...SSF trace level is 0 .
M ===...SSF library is D:\usr\sap\DEV\SYS\exe\run\sapsecu.dll .
M ===...SSF hash algorithm is SHA1 .
M ===...SSF symmetric encryption algorithm is DES-CBC .
M ===...sucessfully completed.
M =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M ThCheckPrevUser: clean previous user T22/U23/M0/I2
M
M Modeinfo for User T22/M0
M
M tm state = 2
M uid = 23
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >DDIC <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M blockSoftCanel = NO
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 1
M roll state = 3
M abap state = 3
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = NULL
M
M ThCheckPrevUser: reset spa state for user T22/U23/M0
M LOCK WP ca_blk 216
M LOCK APPC ca_blk 72
M set task type ZTTABTC
M ThCleanPrevUser: clean U23 T22 M0 I2 clean state DP_DEFAULT_CLEANING from previous wp
M ThCleanPrevUser: saved MODE_REC = 40
M PfStatDisconnect: disconnect statistics
M ThCheckEmState: check ATTACH for em hdl 1
M ThCheckEmState: call EmContextAttach (em_hdl=1)
M ThIAMDel: delete tid/mode 22/0 (th_errno 23, release 1)
M ThTSCancel: set T22 M0 in status MODE_CANCEL
M ThIDeleteMode (22, 0, 3, ><, 0, 255, TRUE)
M ThIDeleteMode: no modes found ..
M no sub modes
M ThSUsrDel: delete system user
M ThSUsrDel: clean batch after error (23)
C The IRow interface is supported by this OLEDB provider
M ThScheduler: server name: appserver_DEV_00
M ThISendMsg: send message (5) to server (wp) with name >appserver_DEV_00 <
M ThISndName: send to name: >appserver_DEV_00 <
M ThISend: (tm/user/type = 22/DDIC /0x2000, mode_deleted=0)
M MSG_NAME
M ThRqOutCheck: o.k.
M abap strategy ROLL / O.K.
M ThNewWpStat: new state of T22/M0 = 0xc2
M ThISend: new wp stat: 0x0
M Adresse Offset Message by name (one way)
M -
M 0639A0C0 000000 00000000 05000000 255f4556 454e545f |........%%_EVENT_|
M 0639A0D0 000016 53434845 44554c45 52002020 20202020 |SCHEDULER. |
M -
M ThMkReq: send output to canceled mode
M make DISP owner of wp_ca_blk 216
M put request into queue (reqtype 0, prio LOW, rq_id 158)
M -OUT- sender_id WORK_PROCESS tid 22 wp_ca_blk 216 wp_id 22
M -OUT- action SEND_MSG_ONEWAY uid 23 appc_ca_blk -1 type NOWP
M -OUT- new_stat NO_CHANGE mode 0 len 268 rq_id 158
M -OUT- forward DIA
M -OUT- req_info CANCELMODE MSG_WITH_REQ_BUF MSG_WITH_OH
M NiPHostToAddr: read hostaddr 127.0.0.1 from operating system
M NiIHostToAddr: hostname localhost = addr 127.0.0.1
M NiPServToNo: read servno 3200 from operating system
M NiIServToNo: servicename sapdp00 = port 0C.80/3200
M NiCreateHandle: state nihandle-socket 1-1024 NI_INITIAL
M NiIDgSend: init datagram send_handle 1-1024
M CPU byte order: little endian, reverse network, low val .. high val
M NiIDgSend: send dgram to: host 127.0.0.1, port 0C.80/3200, fam 2 (low adr..high adr)
M LOCK WP ca_blk 217
M ThResFree: free resources of U23 M0 I2 (normal mode, complete free) at level 3, db_action=TH_DB_NO_ACTION
M ThResFree: reset spa state for user T22/U23/M0
M ThCallHooks: call hook >SpoolHandleHook< for event SOS_HOOK_BEFORE_SESSION_CANCEL
M PfStatDisconnect: disconnect statistics
M ThDealComm: T22/U23/M0 has no cpic conns
M ***LOG R47=> ThResFree, delete (001023) [thxxmode.c 1099]
M ThGetEnqInfo: no enq info found
M ThVBIRollBack: initialize TH-hooks
M SosRegisterHook: add hook >ThVBICmRbHook< for event AFTER_COMMIT
M SosRegisterHook: add hook >ThVBICmRbHook< for event AFTER_ROLLBACK
M ThRmLocQueue: no async request found
M ThInvalidateRfcCliId: invalidate RfcCliId at 5DA68C48
M ThRmFree: cleanup resources for T22 M0
M RmCleanUpResources2: hdr/tbl/ext_tbl = 04037058/00000000/0
M RmCleanUpResources2: no resources registered
M ThRmFree: reset eg state of T22 M0
M ThRmFree cleanup resources for T22
M RmCleanUpResources2: hdr/tbl/ext_tbl = 04037BB8/5DA68D20/1
M RmCleanUpResources2: call resource handler 0047A981 for key/entry 3/0
M ThFreeRollMemory: release eg adr 5DA68C48 for T22
M RmInitResourceTblEntry: free resource description at 5DA693A8 (ext_tbl=1)
M ThFreeRollMemory: release eg adr 5DA693A8 for T22
M RmIFreeTable: free resource table at 5DA68D20 (ext_tbl=1)
M ThFreeRollMemory: release eg adr 5DA68D20 for T22
M ThRmFree: reset eg state of T22
M ThEmFree: call EmContextDelete (em_hdl=1)
M ThResFree: save spa pointer 7FDCE7E0 and install dummy spa
M ThCheckComOrRb (event=1, full_commit=1)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCheckComOrRb (event=3, full_commit=1)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThISend: (tm/user/type = 22/SAPSYS /0x41, mode_deleted=1)
M TASK_SWITCH
M DISP
M ThRqOutCheck: o.k.
M ThISend: allowed rq_type of T22/M0 = 0
M abap strategy ROLL / O.K.
M ThNewWpStat: new MODE_REC = 40
M ThNewWpStat: new state of T22/M0 = 0xc1
M ThISend: new wp stat: 0x2
M ThMkReq: send output to canceled mode
M ThISend: complete stat record
M make DISP owner of wp_ca_blk 217
M put request into queue (reqtype 0, prio LOW, rq_id 159)
M -OUT- sender_id WORK_PROCESS tid 22 wp_ca_blk 217 wp_id 22
M -OUT- action SEND_TO_DP uid 23 appc_ca_blk -1 type NOWP
M -OUT- new_stat WP_WAIT mode 0 len 8 rq_id 159
M -OUT- req_info CANCELMODE
M NiIDgSend: send dgram to: host 127.0.0.1, port 0C.80/3200, fam 2 (low adr..high adr)
M REL APPC ca_blk 72
M ThISend: th_wp_waits_for_rq = TH_WP_WAITS_FOR_RQPfClearAllRec: clear statistic area
M PfStatDisconnect: disconnect statistics
M ThSysUsrCheck(1,1): check system user T22/U23/M0
M ThSysUsrCheck: clear T22
M DpITmSlotClear: clear slot 22
M DpListRemove: elem 22 not in tmadm_free_list
M DpListInsert: elem 22 already in tmadm_inuse_list
M rdisp/wp_auto_restart = 0
M rdisp/wp_abap_restart = 0
M ThSetThToolParam : restartable_wp[0] = FALSE
M ThSetThToolParam : restartable_wp[1] = TRUE
M ThSetThToolParam : restartable_wp[2] = TRUE
M ThSetThToolParam : restartable_wp[3] = FALSE
M ThSetThToolParam : restartable_wp[4] = TRUE
M ThSetThToolParam : restartable_wp[5] = TRUE
M ThSetThToolParam : restartable_wp[6] = TRUE
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH
M TskhLoop: switch back to normal tracel level 1
B
B Mon Nov 19 20:15:39 2007
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:46D.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * = 0x0,
B use_hints = abap->1, dbif->1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000094) [dpnttool.c 390]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000094 (Divide by zero)
App : disp+work.EXE (pid=432)
When : 11/19/2007 20:15:39.822
Threads : 2
Computer Name : APPSERVER
User Name : SAPServiceDEV
Number of Processors: 4
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
Stack Dump for Thread Id 10c8
eax=0000a000 ebx=00000000 ecx=00000000 edx=00000000 esi=03f48b44 edi=00000000
eip=10032cab esp=031688b0 ebp=031688dc iopl=0 nv up ei pl nz na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010206
function : <nosymbols>
10032c92 807d1400 cmp byte ptr [ebp+0x14],0x0 ss:062cfc7a=00
10032c96 7422 jz dsql_db_init+0x30d0a (10032cba)
10032c98 394e08 cmp [esi+0x8],ecx ds:070afee2=????????
10032c9b 751d jnz dsql_db_init+0x30d0a (10032cba)
10032c9d 8d047f lea eax,[edi+edi*2] ds:00000000=????????
10032ca0 c1e003 shl eax,0x3
10032ca3 8bd0 mov edx,eax
10032ca5 8b4518 mov eax,[ebp+0x18] ss:062cfc7a=00000000
10032ca8 2bc2 sub eax,edx
10032caa 99 cdq
FAULT-> 10032cab f7fb idiv ebx
10032cad 0fbfd0 movsx edx,ax
10032cb0 eb0b jmp dsql_db_init+0x30d0d (10032cbd)
10032cb2 6a02 push 0x2
10032cb4 58 pop eax
10032cb5 e9df040000 jmp dsql_db_init+0x311e9 (10033199)
10032cba 6a01 push 0x1
10032cbc 5a pop edx
10032cbd 803dd95a1d1000 ds:101d5ad9=00
cmp byte ptr [EndFastload+0x19644f (101d5ad9)],0x0
10032cc4 7409 jz dsql_db_init+0x30d1f (10032ccf)
10032cc6 833dac591d1006 ds:101d59ac=00000006
cmp dword ptr [EndFastload+0x196322 (101d59ac)],0x6
10032ccd 7416 jz dsql_db_init+0x30d35 (10032ce5)
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
031688dc 1000d5df 00000000 018b76f0 00000000 00000001 dbmssslib!dsql_db_init
03168978 10001cb3 03f41f80 018b8ca8 018b76f0 00000035 dbmssslib!dsql_db_init
031689c4 008f4765 010056b8 00000035 00000001 018b8ca8 dbmssslib!DbSlVersion
031689f4 008f10a9 00000001 00000000 3f26827c 00000000 disp+work!<nosymbols>
03168a74 008f05ff 00000000 3f26827c 00000000 3f2682ec disp+work!<nosymbols>
03168a9c 008a2873 00000000 018b769c 3f2682ec 00000000 disp+work!<nosymbols>
03168b48 0089ef88 00000000 3f26827c 3f2682ec 03168d0c disp+work!<nosymbols>
03168b5c 008a1714 3f261654 00000000 00000000 00000000 disp+work!<nosymbols>
03168d0c 0089d4ec 00000000 3f26827c 3f2682ec 00000000 disp+work!<nosymbols>
03168ea0 0061f5f7 00000000 3f26827c 3f2682ec ffffffff disp+work!<nosymbols>
03168edc 00616212 00000007 03168ef8 0316f130 00000000 disp+work!<nosymbols>
03168f1c 005bf6a0 00000008 29339f2c 00000000 3f2918e0 disp+work!<nosymbols>
0316f140 00629e43 00000000 00000000 0316f170 00000001 disp+work!<nosymbols>
00e5bc44 00000000 49444553 00000000 4f525f25 0000544f disp+work!<nosymbols>
Stack Dump for Thread Id 10c4
eax=00000001 ebx=00000103 ecx=7c829f59 edx=00380000 esi=00000000 edi=00000000
eip=7c8285ec esp=054ffc74 ebp=054ffcb8 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c8285ec c3 ret
7c8285ed 8da42400000000 lea esp,[esp] ss:054ffc74=7c8270fb
7c8285f4 8d642400 lea esp,[esp] ss:08667013=00000000
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
054ffcb8 00c3475c 00000688 00000000 00000000 03e7bdf0 ntdll!KiFastSystemCallRet
054fff84 77bcb530 00000000 00000000 00000000 03e7be88 disp+work!<nosymbols>
054fffb8 77e64829 03e7be88 00000000 00000000 03e7be88 MSVCRT!endthreadex
054fffec 00000000 77bcb4bc 03e7be88 00000000 00000000 kernel32!GetModuleHandleA
M -
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 4, th_errno 11, action 4)
M
M Info for wp 22
M
M stat = 4
M reqtype = 4
M act_reqtype = 4
M tid = 22
M mode = 0
M len = 24
M rq_id = 1131
M rq_source = 1
M rq_info = 8576
M last_tid = 22
M last_mode = 0
M int_checked_resource = 0
M ext_checked_resource = 0
M report = > <
M action = 0
M tab_name = > <
M
M Modeinfo for User T22/M0
M
M tm state = 2
M uid = 23
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >DDIC <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M blockSoftCanel = NO
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 1
M roll state = 4
M abap state = 4
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = NULL
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server appserver_DEV_00 on host appserver (wp 22)
M * ERROR ThSigHandler: signal
M *
M * TIME Mon Nov 19 20:15:39 2007
M * RELEASE 46D
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 8628
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALL_HOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M Entering ThSetStatError
M *** WARNING => sql break failed (-1)
M ThErrHandle: don't try rollback again
M ThErrHandle: call ThrCoreInfo
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
C HandleOledbError [RpcExec,line 22204]: Error/Message: (err 8144, sev 0), Procedure or function ##Y8APPSERVEDEV00000054000000000014183031 has too many arguments specified.
C RpcExec failed. HR 80040e14 DBSL retcode 99. proc: [##Y8APPSERVEDEV00000054000000000014183031]
C retry with SQL statement string
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_RETURN
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
B Disconnecting from ALL connections:
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 022 000 R/3 000000 ACTIVE YES YES NO 20071119 184034
B Disconnected from connection 0
B statistics db_con_commit (com_total=6, com_forced=2, com_tx=2)
B statistics db_con_rollback (roll_total=0, roll_forced=0, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc22 432) [dpnttool.c 310]
M return from clean-up function ...
trc file: "dev_w22", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Nov 19 20:15:54 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' ...
B Library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' loaded
B Version of library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' is "46D.00", patchlevel (0.2328)
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 2352
M intno 0
M pid 4492
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc22 4492) [dpxxdisp.c 976]
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 2328
C patchcomment MSSQL: Transaction inconsistencies HOTNEWS (1067103)
C SQLOLEDB Provider Release:08.10.3959
C Using shared procedure name cache (APPSERVER_DEVDEV_MEM,1320040 bytes,10000 procs) initialized by another process
C Using shared TEMP procedure cache (APPSERVER_DEVDEV_TSP,7040024 bytes,10000 procs) initialized by another process
C Connected to db server : [appserver], dbname: DEV, dbuser: dev
B Connection 0 opened
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE NO YES NO 20071119 201554
M db_connect o.k.
I MtxInit: 22 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 22, WP_CNT = 31
B dbtbxbuf: Buffer TABL (addr: 0BA400C8, size: 6000000, end: 0BFF8E48)
B dbexpbuf: Buffer EIBUF (addr: 0C2100D0, size: 4194304, end: 0C6100D0)
B dbexpbuf: Buffer CUA (addr: 0C6200D0, size: 3072000, end: 0C90E0D0)
M rdisp/reinitialize_code_page -> 0
M rdisp/hold_keeps_time_slice -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M PfReadDBVersion: use compatibility mode for stat-files
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 07D86BF0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0D760098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0D760798
S using messages for server info
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A Attached to PXA (address 28230040, size 154674K)
A abap/pxa = shared
A PXA INITIALIZATION FINISHED
A -PXA--
A
A RFC rfc/dump_client_info not set, use default -1
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC rfc/bc_no_gui_cp_refresh not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M SsfSapSecin: putenv(SECUDIR=D:\usr\sap\DEV\DVEBMGS00\sec): ok
M
M =================================================
M === SSF INITIALIZATION:
M ===...SSF Security Toolkit name SAPSECULIB .
M ===...SSF trace level is 0 .
M ===...SSF library is D:\usr\sap\DEV\SYS\exe\run\sapsecu.dll .
M ===...SSF hash algorithm is SHA1 .
M ===...SSF symmetric encryption algorithm is DES-CBC .
M ===...sucessfully completed.
M =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M ThCheckPrevUser: clean previous user T22/U23/M0/I2
M
M Modeinfo for User T22/M0
M
M tm state = 2
M uid = 23
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >DDIC <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M blockSoftCanel = NO
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 1
M roll state = 3
M abap state = 3
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = NULL
M
M ThCheckPrevUser: reset spa state for user T22/U23/M0
M LOCK WP ca_blk 216
M LOCK APPC ca_blk 72
M set task type ZTTABTC
M ThCleanPrevUser: clean U23 T22 M0 I2 clean state DP_DEFAULT_CLEANING from previous wp
M ThCleanPrevUser: saved MODE_REC = 40
M PfStatDisconnect: disconnect statistics
M ThCheckEmState: check ATTACH for em hdl 1
M ThCheckEmState: call EmContextAttach (em_hdl=1)
M ThIAMDel: delete tid/mode 22/0 (th_errno 23, release 1)
M ThTSCancel: set T22 M0 in status MODE_CANCEL
M ThIDeleteMode (22, 0, 3, ><, 0, 255, TRUE)
M ThIDeleteMode: no modes found ..
M no sub modes
M ThSUsrDel: delete system user
M ThSUsrDel: clean batch after error (23)
C The IRow interface is supported by this OLEDB provider
M ThScheduler: server name: appserver_DEV_00
M ThISendMsg: send message (5) to server (wp) with name >appserver_DEV_00 <
M ThISndName: send to name: >appserver_DEV_00 <
M ThISend: (tm/user/type = 22/DDIC /0x2000, mode_deleted=0)
M MSG_NAME
M ThRqOutCheck: o.k.
M abap strategy ROLL / O.K.
M ThNewWpStat: new state of T22/M0 = 0xc2
M ThISend: new wp stat: 0x0
M Adresse Offset Message by name (one way)
M -
M 0639A0C0 000000 00000000 05000000 255f4556 454e545f |........%%_EVENT_|
M 0639A0D0 000016 53434845 44554c45 52002020 20202020 |SCHEDULER. |
M -
M ThMkReq: send output to canceled mode
M make DISP owner of wp_ca_blk 216
M put request into queue (reqtype 0, prio LOW, rq_id 1165)
M -OUT- sender_id WORK_PROCESS tid 22 wp_ca_blk 216 wp_id 22
M -OUT- action SEND_MSG_ONEWAY uid 23 appc_ca_blk -1 type NOWP
M -OUT- new_stat NO_CHANGE mode 0 len 268 rq_id 1165
M -OUT- forward DIA
M -OUT- req_info CANCELMODE MSG_WITH_REQ_BUF MSG_WITH_OH
M NiPHostToAddr: read hostaddr 127.0.0.1 from operating system
M NiIHostToAddr: hostname localhost = addr 127.0.0.1
M NiPServToNo: read servno 3200 from operating system
M NiIServToNo: servicename sapdp00 = port 0C.80/3200
M NiCreateHandle: state nihandle-socket 1-1024 NI_INITIAL
M NiIDgSend: init datagram send_handle 1-1024
M CPU byte order: little endian, reverse network, low val .. high val
M NiIDgSend: send dgram to: host 127.0.0.1, port 0C.80/3200, fam 2 (low adr..high adr)
M LOCK WP ca_blk 217
M ThResFree: free resources of U23 M0 I2 (normal mode, complete free) at level 3, db_action=TH_DB_NO_ACTION
M ThResFree: reset spa state for user T22/U23/M0
M ThCallHooks: call hook >SpoolHandleHook< for event SOS_HOOK_BEFORE_SESSION_CANCEL
M PfStatDisconnect: disconnect statistics
M ThDealComm: T22/U23/M0 has no cpic conns
M ***LOG R47=> ThResFree, delete (001023) [thxxmode.c 1099]
M ThGetEnqInfo: no enq info found
M ThVBIRollBack: initialize TH-hooks
M SosRegisterHook: add hook >ThVBICmRbHook< for event AFTER_COMMIT
M SosRegisterHook: add hook >ThVBICmRbHook< for event AFTER_ROLLBACK
M ThRmLocQueue: no async request found
M ThInvalidateRfcCliId: invalidate RfcCliId at 5DA68C48
M ThRmFree: cleanup resources for T22 M0
M RmCleanUpResources2: hdr/tbl/ext_tbl = 04037058/00000000/0
M RmCleanUpResources2: no resources registered
M ThRmFree: reset eg state of T22 M0
M ThRmFree cleanup resources for T22
M RmCleanUpResources2: hdr/tbl/ext_tbl = 04037BB8/5DA68D20/1
M RmCleanUpResources2: call resource handler 0047A981 for key/entry 3/0
M ThFreeRollMemory: release eg adr 5DA68C48 for T22
M RmInitResourceTblEntry: free resource description at 5DA693A8 (ext_tbl=1)
M ThFreeRollMemory: release eg adr 5DA693A8 for T22
M RmIFreeTable: free resource table at 5DA68D20 (ext_tbl=1)
M ThFreeRollMemory: release eg adr 5DA68D20 for T22
M ThRmFree: reset eg state of T22
M ThEmFree: call EmContextDelete (em_hdl=1)
M ThResFree: save spa pointer 7FDCE7E0 and install dummy spa
M ThCheckComOrRb (event=1, full_commit=1)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCheckComOrRb (event=3, full_commit=1)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThISend: (tm/user/type = 22/SAPSYS /0x41, mode_deleted=1)
M TASK_SWITCH
M DISP
M ThRqOutCheck: o.k.
M ThISend: allowed rq_type of T22/M0 = 0
M abap strategy ROLL / O.K.
M ThNewWpStat: new MODE_REC = 40
M ThNewWpStat: new state of T22/M0 = 0xc1
M ThISend: new wp stat: 0x2
M ThMkReq: send output to canceled mode
M ThISend: complete stat record
M make DISP owner of wp_ca_blk 217
M put request into queue (reqtype 0, prio LOW, rq_id 1166)
M -OUT- sender_id WORK_PROCESS tid 22 wp_ca_blk 217 wp_id 22
M -OUT- action SEND_TO_DP uid 23 appc_ca_blk -1 type NOWP
M -OUT- new_stat WP_WAIT mode 0 len 8 rq_id 1166
M -OUT- req_info CANCELMODE
M NiIDgSend: send dgram to: host 127.0.0.1, port 0C.80/3200, fam 2 (low adr..high adr)
M -
Core dump loops on a forms 5 crashes
dear all,
a customer uses really old forms stuff (v 5.0.6.23.1). in some cases the forms-application crashes (not reproducible, because the app. says goodbye in different actions/triggers - i'm still investigation to find some similaries) and writes a core dump.
the curious problem is, that the generation of the dump-file loops (see the call stack below) and writes a huge f50run32_dump file (until the disk space exceeds). these ends up in a loss of service if the sysadmins don't intervene instantly.
does anyone know/hear something about such a phenomenon?
dumpfile-excerpt:
snip <<<<<<<<<<02/01/07 10:31:52 Westeuropäische Normalzeit]::Client Status [ConnId=0, PID=12980]
>> ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION
======================= STACK DUMP =======================
Fault address: 003BAEF1 01:00009EF1
Module: C:\Anwendungen\ORANT\BIN\KG734.dll
System Information:
Operating System: Windows NT Version 5.0 Build 2195 Service Pack 4
Command line: C:\Anwendungen\ORANT\BIN\F50RUN32.EXE module=unips_v.fmx
FORM/BLOCK/FIELD: AL_LAGERINFO:IDN.IDV_NR
Last Trigger: WHEN-VALIDATE-ITEM - (In Progress)
Msg: <NULL>
Last Builtin: GO_ITEM - (Successfully Completed)
Registers:
EAX:FFFFFFF8
EBX:023F9930
ECX:00000190
EDX:66FD54D8
ESI:01696A48
EDI:01D7C27C
CS:EIP:001B:003BAEF1
SS:ESP:0023:0012F02C EBP:0012F098
DS:0023 ES:0023 FS:0038 GS:0000
Flags:00010293
Call stack:
Address Frame
003BAEF1 0012F098 0001:00009EF1 C:\Anwendungen\ORANT\BIN\KG734.dll
002E1D6B 0012F110 0001:00010D6B C:\Anwendungen\ORANT\BIN\PLS234.dll
002DF7CE 0012F1A4 0001:0000E7CE C:\Anwendungen\ORANT\BIN\PLS234.dll
66F69584 023AE568 depxcnamespaceactive
016B1A8C 01DA250C 0000:00000000
023AE568 01D10C24 0000:00000000
01DA250C 016B1A8C 0000:00000000
01D10C24 023AE568 0000:00000000
016B1A8C 01DA250C 0000:00000000
023AE568 01D10C24 0000:00000000
01DA250C 016B1A8C 0000:00000000
01D10C24 023AE568 0000:00000000
016B1A8C 01DA250C 0000:00000000
023AE568 01D10C24 0000:00000000
01DA250C 016B1A8C 0000:00000000
01D10C24 023AE568 0000:00000000
016B1A8C 01DA250C 0000:00000000
023AE568 01D10C24 0000:00000000
01DA250C 016B1A8C 0000:00000000
01D10C24 023AE568 0000:00000000
snip <<<<<<<<<<i have forgotten to mention, that the the migration decision is not on my way. if i could, i had migrated the stuff to 10gR2 and assigned the problem to the oracle support.
but the last 2tier environment has already been considered. maybe that problem will force the management to react.
furthermore, i searched the metalink without any result. i hope somebody has an idea what i can check, configure, some workaround hints, etc.
does anyone know a tool for winnt to limit the max. filesize on os-level. so a loss of service can be prevented easily.
thx for your replys -
Large Core Dumps after DB Backup Control File
Hi All,
Server Specs (it is the test server having no functional modules):
Windows 2003 64bit
Oracle 10.2.0.4 (Patched from 10.2.0.2)
Netweaver 2004s
SQL> RECOVER DATABASE USING BACKUP CONTROLFILE UNTIL CANCEL
ORA-00279: change 21375038 generated at 09/21/2007 20:12:47 needed for thread 1
ORA-00289: suggestion : /export/pspp/oracle/dbs/xxx_example_xxx.dbf
ORA-00280: change 21375038 for thread 1 is in sequence #4
Specify log: {=suggested | filename | AUTO | CANCEL}
/OraRedo/RedoLogFiles/xxx_example_xxx.dbf
Log applied.
Media recovery complete.
I was facing Control file inconsistence issues against 2 partitions. Issue was resolved by using above commands and Netweaver started successfully. Im now facing another problem, im getting huge tracefiles in SAPTRACE\BACKGROUND folder since its recovery. I deleted those tracefiles which were of approx. 86GB.
Current Tracefiles sizes are:
<drive>:\oracle\TST\saptrace\background\tst_m000_5188.trc (7MB) and it is getting double by each generation.
Here are tracefiles of today (old ones deleted by me coz it was consuming a hell of space, e.g: 86GB as mentioned):
tst_m000_5188.trc (7 MB) Latest
tst_j000_5316.trc (4MB)
Here is Initial info from alert_tst.txt file contained in same folder:
Dump file f:\oracle\tst\saptrace\background\alert_tst.log
Thu Sep 02 13:55:34 2010
ORACLE V10.2.0.4.0 - 64bit Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 1
CPU : 2 - type 8664, 1 Physical Cores
Process Affinity : 0x0000000000000000
Memory (Avail/Total): Ph:2886M/4019M, Ph+PgF:19295M/20131M
Thu Sep 02 13:55:34 2010
Starting ORACLE instance (normal)
Thu Sep 02 13:55:35 2010
Specified value of sga_max_size is too small, bumping to 666894336
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes = 80
sessions = 96
event = 10191 trace name context forever, level 1
sga_max_size = 666894336
shared_pool_size = 318767104
shared_pool_reserved_size= 31598837
filesystemio_options = setall
control_files = E:\ORACLE\TST\ORIGLOGA\CNTRL\CNTLRTST.DBF, E:\ORACLE\TST\ORIGLOGB\CNTRL\CNTRLTST.DBF, F:\ORACLE\TST\SAPDATA1\CNTRL\CNTRLTST.DBF
control_file_record_keep_time= 30
db_block_size = 8192
db_cache_size = 318767104
compatible = 10.2.0
log_archive_dest = E:\oracle\TST\oraarch\TSTarch
log_buffer = 2061312
log_checkpoint_interval = 0
db_files = 254
log_checkpoints_to_alert = TRUE
dml_locks = 4000
undo_management = AUTO
undo_tablespace = PSAPUNDO
undo_retention = 43200
recyclebin = off
remote_os_authent = TRUE
remote_login_passwordfile= EXCLUSIVE
job_queue_processes = 1
background_dump_dest = F:\ORACLE\TST\SAPTRACE\BACKGROUND
user_dump_dest = F:\ORACLE\TST\SAPTRACE\USERTRACE
core_dump_dest = F:\ORACLE\TST\SAPTRACE\BACKGROUND
optimizer_features_enable= 10.2.0.1
sort_area_size = 2097152
sort_area_retained_size = 0
db_name = TST
open_cursors = 800
_optim_peek_user_binds = FALSE
pga_aggregate_target = 421317836
workarea_size_policy = AUTO
statistics_level = typical
MMAN started with pid=4, OS id=2760
PMON started with pid=2, OS id=2748
DBW0 started with pid=5, OS id=712
LGWR started with pid=6, OS id=604
CKPT started with pid=7, OS id=1088
SMON started with pid=8, OS id=1164
RECO started with pid=9, OS id=2680
CJQ0 started with pid=10, OS id=2972
MMON started with pid=11, OS id=1816
MMNL started with pid=12, OS id=2904
PSP0 started with pid=3, OS id=2692
Please Review,
Thanks in Advance.
Best Regards.All dispatchers and shared servers shutdown
Mon Jan 10 15:19:45 2011
ALTER DATABASE CLOSE NORMAL
Mon Jan 10 15:19:45 2011
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Jan 10 15:19:46 2011
Shutting down archive processes
Archiving is disabled
Mon Jan 10 15:19:51 2011
ARCH shutting down
ARC1: Archival stopped
Mon Jan 10 15:19:56 2011
ARCH shutting down
ARC0: Archival stopped
Mon Jan 10 15:19:57 2011
Thread 1 closed at log sequence 11
Successful close of redo thread 1
Mon Jan 10 15:19:59 2011
Completed: ALTER DATABASE CLOSE NORMAL
Mon Jan 10 15:19:59 2011
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Shutting down Data Guard Broker processes
Mon Jan 10 15:20:00 2011
Completed: Data Guard Broker shutdown
Mon Jan 10 15:20:02 2011
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Jan 10 15:21:43 2011
Starting ORACLE instance (normal)
Mon Jan 10 15:21:43 2011
Specified value of sga_max_size is too small, bumping to 645922816
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes = 80
sessions = 96
event = 10191 trace name context forever, level 1
sga_max_size = 645922816
shared_pool_size = 318767104
__java_pool_size = 4194304
java_pool_size = 4194304
shared_pool_reserved_size= 31598837
filesystemio_options = setall
control_files = E:\ORACLE\TST\ORIGLOGA\CNTRL\CNTLRTST.DBF, E:\ORACLE\TST\ORIGLOGB\CNTRL\CNTRLTST.DBF, F:\ORACLE\TST\SAPDATA1\CNTRL\CNTRLTST.DBF
control_file_record_keep_time= 30
db_block_size = 8192
db_cache_size = 318767104
compatible = 10.2.0
log_archive_dest = E:\oracle\TST\oraarch\TSTarch
log_buffer = 2061312
log_checkpoint_interval = 0
db_files = 254
log_checkpoints_to_alert = TRUE
dml_locks = 4000
undo_management = AUTO
undo_tablespace = PSAPUNDO
undo_retention = 43200
recyclebin = off
remote_os_authent = TRUE
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=TSTXDB)
job_queue_processes = 1
background_dump_dest = F:\ORACLE\TST\SAPTRACE\BACKGROUND
user_dump_dest = F:\ORACLE\TST\SAPTRACE\USERTRACE
core_dump_dest = F:\ORACLE\TST\SAPTRACE\BACKGROUND
optimizer_features_enable= 10.2.0.1
sort_area_size = 2097152
sort_area_retained_size = 0
db_name = TST
open_cursors = 800
optimpeek_user_binds = FALSE
pga_aggregate_target = 421317836
workarea_size_policy = AUTO
statistics_level = typical
dg_broker_start = TRUE
PMON started with pid=2, OS id=5108
PSP0 started with pid=3, OS id=3884
MMAN started with pid=4, OS id=3212
DBW0 started with pid=5, OS id=4508
LGWR started with pid=6, OS id=4124
CKPT started with pid=7, OS id=3684
SMON started with pid=8, OS id=3284
RECO started with pid=9, OS id=4360
CJQ0 started with pid=10, OS id=2128
MMON started with pid=11, OS id=3976
Mon Jan 10 15:21:43 2011
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=3444
Mon Jan 10 15:21:43 2011
starting up 1 shared server(s) ...
DMON started with pid=15, OS id=4136
Mon Jan 10 15:21:43 2011
ALTER DATABASE MOUNT
Mon Jan 10 15:21:48 2011
Setting recovery target incarnation to 4
Mon Jan 10 15:21:48 2011
Successful mount of redo thread 1, with mount id 1881221383
Mon Jan 10 15:21:48 2011
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Mon Jan 10 15:21:48 2011
ALTER DATABASE OPEN
Mon Jan 10 15:21:51 2011
Starting Data Guard Broker (DMON)
INSV started with pid=16, OS id=4264
Mon Jan 10 15:21:55 2011
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=18, OS id=4768
Mon Jan 10 15:21:55 2011
ARC0: Archival started
Mon Jan 10 15:21:55 2011
ARC1: Archival started
ARC1 started with pid=19, OS id=5288
LGWR: STARTING ARCH PROCESSES COMPLETE
Thread 1 opened at log sequence 11
Current log# 3 seq# 11 mem# 0: E:\ORACLE\TST\ORIGLOGA\LOG_G13M1.DBF
Current log# 3 seq# 11 mem# 1: E:\ORACLE\TST\MIRRLOGA\LOG_G13M2.DBF
Successful open of redo thread 1
Mon Jan 10 15:21:57 2011
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Jan 10 15:21:57 2011
SMON: enabling cache recovery
Mon Jan 10 15:21:57 2011
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Mon Jan 10 15:21:57 2011
ARC1: Becoming the heartbeat ARCH
Mon Jan 10 15:21:58 2011
Incremental checkpoint up to RBA [0xb.16b77.0], current log tail at RBA [0xb.16b77.0]
Mon Jan 10 15:21:59 2011
Successfully onlined Undo Tablespace 1.
Mon Jan 10 15:21:59 2011
SMON: enabling tx recovery
Mon Jan 10 15:21:59 2011
Database Characterset is UTF8
Opening with internal Resource Manager plan
where NUMA PG = 1, CPUs = 2
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=20, OS id=4156
Mon Jan 10 15:22:05 2011
Completed: ALTER DATABASE OPEN
Mon Jan 10 15:52:02 2011
Incremental checkpoint up to RBA [0xb.180ee.0], current log tail at RBA [0xb.1830a.0]
Mon Jan 10 15:52:16 2011
Shutting down instance: further logons disabled
Mon Jan 10 15:52:16 2011
Stopping background process CJQ0
Mon Jan 10 15:52:16 2011
Stopping background process QMNC
Mon Jan 10 15:52:17 2011
Background process QMNC not dead after 150 seconds
Mon Jan 10 15:52:17 2011
Stopping background process MMNL
Mon Jan 10 15:52:18 2011
Background process MMNL not dead after 10 seconds
Mon Jan 10 15:52:18 2011
Stopping background process MMON
Mon Jan 10 15:52:19 2011
Background process MMON not dead after 30 seconds
Mon Jan 10 15:52:19 2011
Shutting down instance (immediate)
License high water mark = 12
Mon Jan 10 15:52:19 2011
Stopping Job queue slave processes, flags = 7
Mon Jan 10 15:52:19 2011
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Mon Jan 10 15:52:24 2011
ALTER DATABASE CLOSE NORMAL
Mon Jan 10 15:52:24 2011
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Jan 10 15:52:25 2011
Shutting down archive processes
Archiving is disabled
Mon Jan 10 15:52:30 2011
ARCH shutting down
ARC1: Archival stopped
Mon Jan 10 15:52:35 2011
ARCH shutting down
ARC0: Archival stopped
Mon Jan 10 15:52:36 2011
Thread 1 closed at log sequence 11
Successful close of redo thread 1
Mon Jan 10 15:52:37 2011
Completed: ALTER DATABASE CLOSE NORMAL
Mon Jan 10 15:52:37 2011
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Shutting down Data Guard Broker processes
Mon Jan 10 15:52:38 2011
Completed: Data Guard Broker shutdown
Mon Jan 10 15:52:40 2011
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Jan 10 15:53:28 2011
Starting ORACLE instance (normal)
Mon Jan 10 15:53:28 2011
Specified value of sga_max_size is too small, bumping to 645922816
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes = 80
sessions = 96
event = 10191 trace name context forever, level 1
sga_max_size = 645922816
__shared_pool_size = 318767104
shared_pool_size = 318767104
__java_pool_size = 4194304
java_pool_size = 4194304
shared_pool_reserved_size= 31598837
filesystemio_options = setall
control_files = E:\ORACLE\TST\ORIGLOGA\CNTRL\CNTLRTST.DBF, E:\ORACLE\TST\ORIGLOGB\CNTRL\CNTRLTST.DBF, F:\ORACLE\TST\SAPDATA1\CNTRL\CNTRLTST.DBF
control_file_record_keep_time= 30
db_block_size = 8192
__db_cache_size = 318767104
db_cache_size = 318767104
compatible = 10.2.0
log_archive_dest = E:\oracle\TST\oraarch\TSTarch
log_buffer = 2061312
log_checkpoint_interval = 0
db_files = 254
log_checkpoints_to_alert = TRUE
dml_locks = 4000
undo_management = AUTO
undo_tablespace = PSAPUNDO
undo_retention = 43200
recyclebin = off
remote_os_authent = TRUE
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=TSTXDB)
job_queue_processes = 1
background_dump_dest = F:\ORACLE\TST\SAPTRACE\BACKGROUND
user_dump_dest = F:\ORACLE\TST\SAPTRACE\USERTRACE
core_dump_dest = F:\ORACLE\TST\SAPTRACE\BACKGROUND
optimizer_features_enable= 10.2.0.1
sort_area_size = 2097152
sort_area_retained_size = 0
db_name = TST
open_cursors = 800
optimpeek_user_binds = FALSE
pga_aggregate_target = 421317836
workarea_size_policy = AUTO
statistics_level = typical
dg_broker_start = TRUE
PMON started with pid=2, OS id=5296
PSP0 started with pid=3, OS id=4804
MMAN started with pid=4, OS id=3480
DBW0 started with pid=5, OS id=4312
LGWR started with pid=6, OS id=4036
CKPT started with pid=7, OS id=3372
SMON started with pid=8, OS id=5816
RECO started with pid=9, OS id=5240
CJQ0 started with pid=10, OS id=4524
MMON started with pid=11, OS id=6140
Mon Jan 10 15:53:28 2011
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=5680
Mon Jan 10 15:53:28 2011
starting up 1 shared server(s) ...
DMON started with pid=15, OS id=5308
Mon Jan 10 15:53:28 2011
ALTER DATABASE MOUNT
Mon Jan 10 15:53:32 2011
Setting recovery target incarnation to 4
Mon Jan 10 15:53:33 2011
Successful mount of redo thread 1, with mount id 1881229688
Mon Jan 10 15:53:33 2011
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Mon Jan 10 15:53:33 2011
ALTER DATABASE OPEN
Mon Jan 10 15:53:36 2011
Starting Data Guard Broker (DMON)
INSV started with pid=16, OS id=4536
Mon Jan 10 15:53:40 2011
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=18, OS id=5552
Mon Jan 10 15:53:40 2011
ARC0: Archival started
ARC1: Archival started
ARC1 started with pid=19, OS id=5312
LGWR: STARTING ARCH PROCESSES COMPLETE
Thread 1 opened at log sequence 11
Current log# 3 seq# 11 mem# 0: E:\ORACLE\TST\ORIGLOGA\LOG_G13M1.DBF
Current log# 3 seq# 11 mem# 1: E:\ORACLE\TST\MIRRLOGA\LOG_G13M2.DBF
Successful open of redo thread 1
Mon Jan 10 15:53:41 2011
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Jan 10 15:53:41 2011
SMON: enabling cache recovery
Mon Jan 10 15:53:42 2011
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Jan 10 15:53:42 2011
ARC0: Becoming the heartbeat ARCH
Mon Jan 10 15:53:43 2011
Incremental checkpoint up to RBA [0xb.18403.0], current log tail at RBA [0xb.18403.0]
Mon Jan 10 15:53:44 2011
Successfully onlined Undo Tablespace 1.
Mon Jan 10 15:53:44 2011
SMON: enabling tx recovery
Mon Jan 10 15:53:44 2011
Database Characterset is UTF8
Opening with internal Resource Manager plan
where NUMA PG = 1, CPUs = 2
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=20, OS id=5776
Mon Jan 10 15:53:50 2011
Completed: ALTER DATABASE OPEN
Mon Jan 10 15:55:46 2011
Starting ORACLE instance (normal)
Mon Jan 10 16:00:56 2011
Errors in file f:\oracle\tst\saptrace\background\tst_j000_3228.trc:
Mon Jan 10 16:01:26 2011
Beginning log switch checkpoint up to RBA [0xc.2.10], SCN: 16865686
Mon Jan 10 16:01:26 2011
Thread 1 advanced to log sequence 12 (LGWR switch)
Current log# 4 seq# 12 mem# 0: E:\ORACLE\TST\ORIGLOGB\LOG_G14M1.DBF
Current log# 4 seq# 12 mem# 1: E:\ORACLE\TST\MIRRLOGB\LOG_G14M2.DBF
Mon Jan 10 16:03:54 2011
Errors in file f:\oracle\tst\saptrace\background\tst_m000_5396.trc:
ORA-00600: internal error code, arguments: [kcbz_check_objd_typ], [0], [0], [1], [], [], [], []
Mon Jan 10 16:04:01 2011
Errors in file f:\oracle\tst\saptrace\background\tst_m000_5396.trc:
ORA-00600: internal error code, arguments: [kcbgcur_3], [61846], [9], [4], [0], [], [], []
Mon Jan 10 16:04:07 2011
Errors in file f:\oracle\tst\saptrace\background\tst_m000_5396.trc:
ORA-00600: internal error code, arguments: [kcbz_check_objd_typ], [0], [0], [1], [], [], [], []
Mon Jan 10 16:06:30 2011
Completed checkpoint up to RBA [0xc.2.10], SCN: 16865686
Mon Jan 10 16:23:50 2011
Incremental checkpoint up to RBA [0xc.4e3a.0], current log tail at RBA [0xc.4f1f.0]
Mon Jan 10 16:53:57 2011
Incremental checkpoint up to RBA [0xc.55b9.0], current log tail at RBA [0xc.5726.0]
Mon Jan 10 17:00:01 2011
Errors in file f:\oracle\tst\saptrace\background\tst_j000_2516.trc:
Mon Jan 10 17:00:29 2011
Errors in file f:\oracle\tst\saptrace\background\tst_m000_6048.trc:
ORA-00600: internal error code, arguments: [kcbz_check_objd_typ], [0], [0], [1], [], [], [], []
Mon Jan 10 17:00:33 2011
Errors in file f:\oracle\tst\saptrace\background\tst_m000_6048.trc:
ORA-00600: internal error code, arguments: [kcbgcur_3], [61846], [9], [4], [0], [], [], []
Mon Jan 10 17:00:37 2011
Errors in file f:\oracle\tst\saptrace\background\tst_m000_6048.trc:
ORA-00600: internal error code, arguments: [kcbz_check_objd_typ], [0], [0], [1], [], [], [], []
Mon Jan 10 17:24:02 2011
Incremental checkpoint up to RBA [0xc.6125.0], current log tail at RBA [0xc.62ae.0] -
Sdo_aggr_union core dump on 11.1
I am using the spatial features of Oracle 11.1 and I have run into a bug
that causes the instance to core dump. I am wondering if anyone could help
me sort out the problem.
I can send the data in the table and the full trace file to anyone interested. I would just attach them to this message, but the forum does not appear to support attachments.
/c/TEMP/bug:: sqlplus a715139/XXX @bug.sql
SQL*Plus: Release 11.1.0.6.0 - Production on Thu Jul 24 17:07:43 2008
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing
options
select
sdo_aggr_union(SDOAGGRTYPE(sdo_util.simplify(geom,1222.99245256282,0.5),
0.5)) from bug
ERROR at line 1:
ORA-03113: end-of-file on communication channel
Process ID: 3596
Session ID: 129 Serial number: 35
Disconnected from Oracle Database 11g Enterprise Edition Release
11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing
options
/c/TEMP/bug: head -125 orcl11_ora_3596_i26632.trc
Dump file c:\app\a715139\diag\rdbms\orcl11\orcl11\incident\incdir_26632\orcl11_ora_3596_i26632.trc
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Windows XP Version V5.1 Service Pack 2
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1130M/3071M, Ph+PgF:3156M/4955M, VA:1240M/2047M
Instance name: orcl11
Redo thread mounted by this instance: 1
Oracle process number: 25
Windows thread id: 3596, image: ORACLE.EXE (SHAD)
*** 2008-07-24 17:07:43.651
*** SESSION ID:(129.35) 2008-07-24 17:07:43.651
*** CLIENT ID:() 2008-07-24 17:07:43.651
*** SERVICE NAME:(SYS$USERS) 2008-07-24 17:07:43.651
*** MODULE NAME:(SQL*Plus) 2008-07-24 17:07:43.651
*** ACTION NAME:() 2008-07-24 17:07:43.651
Dump continued from file: c:\app\a715139\diag\rdbms\orcl11\orcl11\trace\orcl11_ora_3596.trc
ORA-07445: exception encountered: core dump [mdagun_iter()+923] [ACCESS_VIOLATION] [ADDR:0x4] [PC:0x3DC866F] [UNABLE_TO_READ] []
========= Dump for incident 26632 (ORA 7445 [mdagun_iter()+923]) ========
----- Beginning of Customized Incident Dump(s) -----
Exception [type: ACCESS_VIOLATION, UNABLE_TO_READ] [ADDR:0x4] [PC:0x3DC866F, _mdagun_iter()+923]
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
Process Id: 0x00000270 Thread Id : 0x00000e0c Time : Thu Jul 24 17:07:43
Excp. Code: 0xc0000005 Excp. Type: ACCESS_VIO Flags: 0x00000000
------------------- Registers ----------------------------
eip = 03dc866f esp = 30f79144 ebp = 30f7a3b0 edi = 00000000 esi = 30f7ae34
eax = 00000000 ebx = 0d98e234 ecx = 000010e6 edx = 0cef2180
ecs = 0000001b eds = 00000023 ees = 00000023 ess = 00000023
egs = 00000000 efs = 0000003b
eflags = 00010246
------------------- End of Registers ---------------------
*** 2008-07-24 17:07:43.651
----- Current SQL Statement for this session (sql_id=c1f0bx7jjmfmt) -----
select sdo_aggr_union(SDOAGGRTYPE(sdo_util.simplify(geom,1222.99245256282,0.5), 0.5)) from bug
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object line object
handle number name
27C82C3C 59 MDSYS.AGGRUNION
27C82C3C 25 MDSYS.AGGRUNION
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
mdaguniter()+923 00000000
_spefcpfa()+168 CALLreg 00000000 30F7AE34 D982038 D981FA4
D981EF8 D988E04 D9888A8 0
spefmccallstd()+47 CALLrel spefcpfa()+0 30F7AB88 7 D98E1E0 30F7A600
7 30F7A618 0
pextproc()+58 CALLrel spefmccallstd()+0 30F7AE64 30F7AD24 30F7AC00
30F7AB88 0
__PGOSF416__peftrus CALLrel _pextproc()+0
ted()+115
_psdexsp()+192 CALLreg 00000000 30F7AE64
_rpiswu2()+560 CALLreg 00000000 30F7AAD0
psdextp()+685 CALLrel rpiswu2()+0 2F06AA90 58 2F06AAD4 2
30F7AB00 58 2F06AB54 0 0
4492DB8 0 30F7AAD0 1
_pefccal()+467 CALLreg 00000000
pefcal()+174 CALLrel pefccal()+0 30F7AE64
pevmFCAL()+128 CALLrel _pefcal()+0
pfrinstrFCAL()+55 CALLrel pevmFCAL()+0 E39EED0 1E18BD38
pfrrunno_tool()+5 CALL??? 00000000 E39EED0 1E18B512 E39EF10
6
pfrrun()+875 CALLrel pfrrun_no_tool()+0 E39EED0 1E18B45C E39EF10
plsqlrun()+729 CALLrel _pfrrun()+0 E39EED0
peidxrrun()+202 CALLrel plsqlrun()+0 E39EED0 2 E38014C
peidxexe()+52 CALLrel peidxr_run()+0
kkxdexe()+1367 CALLrel peidxexe()+0 E39ED68
kkxmpexe()+184 CALLrel kkxdexe()+0 E39ED68 DE60704 D973E1C
_kgmexwi()+469 CALLreg 00000000 F08A408 23462AC4 DED1B00
E39ED68 27C82C3C D973E1C
D973E3C
kgmexec()+1116 CALLrel kgmexwi()+0 F08A408 1 30F7B910 23462AC4
DED1B00 DED1B44 2 27C82C3C
D973E1C 30F7B84C
evapls()+797 CALLrel kgmexec()+0 F08A408 1 30F7B910 29DD4630
27A0EB54 D973F04 D973E1C 0
D973EF0 0 79
_evaopn2()+609 CALL??? 00000000 213F564C
qximeopfbk()+533 CALL??? 00000000 213F564C
qximeop()+65 CALLrel qximeop_fbk()+0 213F564C 0 C0 30F7BDC8
D951010
qxuageag()+501 CALLrel qximeop()+0 213F564C 0 C0 30F7BDC8
D957100 95 4 213F545C D951C80
DE64064 213F56A8
_qesaAggNonDistSS() CALL??? 00000000 DE64040
+292
_kdstf0000001000kmP CALLreg 00000000
()+2278
kdsttgr()+4444 CALLrel kdstf0000001000kmP
()+0
qertbFetch()+689 CALLrel kdsttgr()+0 D951710 0 213F60FC D951668
213F6148 32FB904 30F7C498
7FFF
_qergsFetch()+1994 CALLptr 00000000 D972F3C DE64040 1 213F5BD0
5A9303D
_opifch2()+7430 CALLreg 00000000 213F5BE4 D951CE8 1B12F34
30F7C674 1
kpoal8()+3756 CALLrel opifch2()+0 89 5 30F7CCF8
_opiodr()+1224 CALLreg 00000000 5E 1C 30F7F20C
_ttcpip()+2733 CALLreg 00000000 5E 1C 30F7F20C 0
_opitsk()+1278 CALL??? 00000000
opiino()+1067 CALLrel opitsk()+0 0 0
_opiodr()+1224 CALLreg 00000000 3C 4 30F7FC24
opidrv()+807 CALLrel opiodr()+0 3C 4 30F7FC24 0
sou2o()+45 CALLrel opidrv()+0 3C 4 30F7FC24
opimaireal()+130 CALLrel _sou2o()+0 30F7FC18 3C 4 30F7FC24
opimai()+92 CALLrel opimai_real()+0 2 30F7FC50
OracleThreadStart@ CALLrel opimai()+0
4()+764
7C80B680 CALLreg 00000000
00000000 CALL??? 00000000Try adding the argument -XX:MaxPermSize=64M to the java command line. Also, 1.3.x
sometimes dies when you take thread dumps.
Mike
"Silvan Heuberger" <[email protected]> wrote:
>
Mike,
JVM version:
$ /opt/java1.3/bin/java -version
java version "JavaVM-1.3.0.01"
Java(TM) 2 Runtime Environment, Standard Edition (build jinteg:02/14/01-23:51)
HotSpot VM (build 1.0.1fcs jinteg:02/15/01-02:43 PA2.0, mixed mode)
Silvan
"Mike Reiche" <[email protected]> wrote:
What JVM are you using?
"Silvan Heuberger" <[email protected]> wrote:
Hi
We are running WLS5.1SP10 on a HP-UX 11.00 and stress the WLS with
50
parallel
users. For the Connection to the DB (Oracle 8.1.7) we use the oci driver
oci816_8
with is deliverd with the sp10. our initial poolsize is set to 20 and
the max
is 100. the currentThreadsize we try from 50 to 140. Already aftera
few requests
(<400) the wls writes a core dump. As we make this with sp6 no coredump
occured,
but the java memory heap overflow.
has somebody the same experience and know a solution for the problem?
Thanx
Silvan -
Page not found, ORA-07445: exception encountered: core dump
any one can help me to check this log? I get "page not found" occasionally.thanks .
Dump file f:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Tue Jan 08 18:14:24 2008
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 1
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:2991M/3583M, Ph+PgF:4952M/5471M, VA:1945M/2047M
Tue Jan 08 18:14:24 2008
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 222298112
__large_pool_size = 16777216
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = F:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 805306368
control_files = F:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size = 557842432
compatible = 10.2.0.1.0
db_recovery_file_dest = F:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 5
job_queue_processes = 4
audit_file_dest = F:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = F:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = F:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = F:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 268435456
PMON started with pid=2, OS id=1132
PSP0 started with pid=3, OS id=3612
MMAN started with pid=4, OS id=2392
DBW0 started with pid=5, OS id=3624
LGWR started with pid=6, OS id=1356
CKPT started with pid=7, OS id=1164
SMON started with pid=8, OS id=3832
RECO started with pid=9, OS id=2904
CJQ0 started with pid=10, OS id=2844
MMON started with pid=11, OS id=2176
Tue Jan 08 18:14:24 2008
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=1292
Tue Jan 08 18:14:24 2008
starting up 5 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jan 08 18:14:24 2008
alter database mount exclusive
Tue Jan 08 18:14:28 2008
Setting recovery target incarnation to 2
Tue Jan 08 18:14:28 2008
Successful mount of redo thread 1, with mount id 2524594368
Tue Jan 08 18:14:28 2008
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Tue Jan 08 18:14:28 2008
alter database open
Tue Jan 08 18:14:28 2008
Beginning crash recovery of 1 threads
Tue Jan 08 18:14:28 2008
Started redo scan
Tue Jan 08 18:14:28 2008
Completed redo scan
1305 redo blocks read, 132 data blocks need recovery
Tue Jan 08 18:14:28 2008
Started redo application at
Thread 1: logseq 62, block 3
Tue Jan 08 18:14:29 2008
Recovery of Online Redo Log: Thread 1 Group 1 Seq 62 Reading mem 0
Mem# 0 errs 0: F:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_1_3NX4T37T_.LOG
Tue Jan 08 18:14:29 2008
Completed redo application
Tue Jan 08 18:14:29 2008
Completed crash recovery at
Thread 1: logseq 62, block 1308, scn 126409946604
132 data blocks read, 132 data blocks written, 1305 redo blocks read
Tue Jan 08 18:14:30 2008
Thread 1 advanced to log sequence 63
Thread 1 opened at log sequence 63
Current log# 2 seq# 63 mem# 0: F:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_3NX4T4J3_.LOG
Successful open of redo thread 1
Tue Jan 08 18:14:30 2008
SMON: enabling cache recovery
Tue Jan 08 18:14:30 2008
Successfully onlined Undo Tablespace 1.
Tue Jan 08 18:14:30 2008
SMON: enabling tx recovery
Tue Jan 08 18:14:30 2008
Database Characterset is AL32UTF8
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=20, OS id=524
Tue Jan 08 18:14:32 2008
Completed: alter database open
Tue Jan 08 18:14:33 2008
db_recovery_file_dest_size of 10240 MB is 0.98% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Tue Jan 08 18:14:53 2008
Memory Notification: Library Cache Object loaded into SGA
Heap size 2208K exceeds notification threshold (2048K)
KGL object name :XDB.XDbD/PLZ01TcHgNAgAIIegtw==
Tue Jan 08 18:56:55 2008
Errors in file f:\oraclexe\app\oracle\admin\xe\bdump\xe_s000_3780.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_npierr+487] [PC:0x5F22C3] [ADDR:0x4] [UNABLE_TO_READ] []
Tue Jan 08 18:56:55 2008
Errors in file f:\oraclexe\app\oracle\admin\xe\bdump\xe_s000_3780.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_npierr+487] [PC:0x5F22C3] [ADDR:0x4] [UNABLE_TO_READ] []
Tue Jan 08 18:56:56 2008
Errors in file f:\oraclexe\app\oracle\admin\xe\bdump\xe_s000_3780.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_npierr+487] [PC:0x5F22C3] [ADDR:0x4] [UNABLE_TO_READ] []
Tue Jan 08 18:57:00 2008
Errors in file f:\oraclexe\app\oracle\admin\xe\bdump\xe_s001_3252.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_npierr+487] [PC:0x5F22C3] [ADDR:0x4] [UNABLE_TO_READ] []
Tue Jan 08 18:57:00 2008
found dead shared server 'S000', pid = (14, 1)
Tue Jan 08 18:57:00 2008
Errors in file f:\oraclexe\app\oracle\admin\xe\bdump\xe_s001_3252.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_npierr+487] [PC:0x5F22C3] [ADDR:0x4] [UNABLE_TO_READ] []
Tue Jan 08 18:57:01 2008
Errors in file f:\oraclexe\app\oracle\admin\xe\bdump\xe_s001_3252.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_npierr+487] [PC:0x5F22C3] [ADDR:0x4] [UNABLE_TO_READ] []
Tue Jan 08 18:58:00 2008
found dead shared server 'S001', pid = (15, 1)
Tue Jan 08 19:03:56 2008
Errors in file f:\oraclexe\app\oracle\admin\xe\bdump\xe_s000_1816.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_npierr+487] [PC:0x5F22C3] [ADDR:0x4] [UNABLE_TO_READ] []
Tue Jan 08 19:03:57 2008
Errors in file f:\oraclexe\app\oracle\admin\xe\bdump\xe_s000_1816.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_npierr+487] [PC:0x5F22C3] [ADDR:0x4] [UNABLE_TO_READ] []
Tue Jan 08 19:03:57 2008
Errors in file f:\oraclexe\app\oracle\admin\xe\bdump\xe_s000_1816.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_npierr+487] [PC:0x5F22C3] [ADDR:0x4] [UNABLE_TO_READ] []
Tue Jan 08 19:03:58 2008
Errors in file f:\oraclexe\app\oracle\admin\xe\bdump\xe_s001_3056.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_npierr+487] [PC:0x5F22C3] [ADDR:0x4] [UNABLE_TO_READ] []
Tue Jan 08 19:04:03 2008
found dead shared server 'S000', pid = (14, 2)
Tue Jan 08 19:04:03 2008
Errors in file f:\oraclexe\app\oracle\admin\xe\bdump\xe_s002_312.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_npierr+487] [PC:0x5F22C3] [ADDR:0x4] [UNABLE_TO_READ] []
Tue Jan 08 19:05:03 2008
found dead shared server 'S001', pid = (15, 2)
found dead shared server 'S002', pid = (16, 1)
Tue Jan 08 19:05:30 2008
Errors in file f:\oraclexe\app\oracle\admin\xe\bdump\xe_s002_2864.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] npierr+487] [PC:0x5F22C3] [ADDR:0x4] [UNABLE_TO_READ] []
Tue Jan 08 19:06:03 2008
found dead shared server 'S002', pid = (16, 2)Anyone can help on it?
The content in trc :
Dump file f:\oraclexe\app\oracle\admin\xe\bdump\xe_s000_4016.trc
Thu Jan 10 11:22:05 2008
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Windows XP Version V5.1 Service Pack 1
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:2860M/3583M, Ph+PgF:4122M/5471M, VA:1095M/2047M
Instance name: xe
Redo thread mounted by this instance: 1
Oracle process number: 14
Windows thread id: 4016, image: ORACLE.EXE (S000)
*** ACTION NAME:(PAGE 4150) 2008-01-10 11:22:05.390
*** MODULE NAME:(APEX:APPLICATION 4000) 2008-01-10 11:22:05.390
*** SERVICE NAME:(SYS$USERS) 2008-01-10 11:22:05.390
*** CLIENT ID:(DENNIS:4389204267300536) 2008-01-10 11:22:05.390
*** SESSION ID:(27.149) 2008-01-10 11:22:05.390
*** 2008-01-10 11:22:05.390
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_npierr+487] [PC:0x5F22C3] [ADDR:0x4] [UNABLE_TO_READ] []
Current SQL statement for this session:
COMMIT
----- PL/SQL Call Stack -----
object line object
handle number name
3BFE8478 6676 package body FLOWS_030000.WWV_FLOW
3BFE8478 9782 package body FLOWS_030000.WWV_FLOW
3BFF9504 255 procedure FLOWS_030000.F
3BFFC6EC 30 anonymous block
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
_npierr+487 00000000 B70F61FA 660D72C2 F7AFA83
1DE5487 20E88300 8D0004C2
8589F841 FFFFFED8 F183B66
3B686 E9098B00 3A1 10845F6
29EE850F A2E90000 8B0002A5
8AFE909 6A0000 82474FF 707E8
~~~~~~~~~~~~~~~~
4C200 33104D8B C1D18BC0
ABF302E9 E183CA8B E9AAF303
3FA 2468B66 FC83B66 E5982
C33B6600 9451850F 5B80002
*** 2008-01-10 11:22:06.406
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_npierr+487] [PC:0x5F22C3] [ADDR:0x4] [UNABLE_TO_READ] []
Current SQL statement for this session:
COMMIT
----- PL/SQL Call Stack -----
object line object
handle number name
3BFE8478 6676 package body FLOWS_030000.WWV_FLOW
3BFE8478 9782 package body FLOWS_030000.WWV_FLOW
3BFF9504 255 procedure FLOWS_030000.F
3BFFC6EC 30 anonymous block
ksedmp: Obtaining call stack failed twice. not retrying -
Delegate Admin install fails with core dump
I have been attempting to install the iPlanet Delegated Adminstrator with the Messaging Server 5.2 release. I am using Directory Server 5.1 service pack 1 on Solaris 8.
Installation of DS 5.1 goes fine.
Installation of MS 5.2 goes fine.
Installation of the web server 6.0 wtih sp4 goes fine
Every time I attempt to install DA, I get a "Segmentation Fault - core dumped" and absolutely no other information.Since this is not a normal thing, I only have two suggestions left:
1. Download the latest version if iDA:
http://wwws.sun.com/software/download/products/3ed69a6c.html
2. Download and apply p1 for iMS (now a year old, but the latest publically available version):
http://wwws.sun.com/software/download/products/3e3afb91.html
3. Install the latest Solaris patch cluster.
If the above fail, then:
4. Open up a tech support ticket. -
OWB 9.03.35.3 + Oracle 9.2 + Core dumps
We have big problems, after we migrate to Oracle 9.2 Database with our packages, we use a selfimplemented Flowmanager like the Oracle one based on a web application using oracle specific functions, but after we migrate to 9.2 no package works, most of them causes core dumps!!!!!
Here is the info we send to Metalink.
Do someone have an idea what may cause this problems!!!!
Erik Heindel (DBA)
Metalink Infos:
Resolution History
13-MAR-03 16:58:03
Can you easily recover from, bypass or work around the problem? = NO
Does your system or application continue normally after the problem occurs? =
YES
Are the standard features of the system or application still available; is the
loss of service minor? = NO
### Platform and O/S version, including patchset or service pack level? ###
HP-UX 64Bit
### What version and patchset level of the database are you running? ###
9.2.0.2
### Are you running the most recent patchset? ###
Yes
### Please describe your problem: ###
Jobs/Packages generated with OWB results in a core dump.
### If you are receiving errors, please list exact error messages and text: ###
see attached file 'core'
### Did the error generate a trace file? ###
No
### Please list all files that you plan to upload: ###
core dump file
### What was being done at time of error? Any changes since this last worked? ##
Database was upgraded from 8.1.7.4 to 9.2.0.2
### Can error be generated if SQL is run in SQL*Plus or Server Manager? ###
Yes
### What is the frequency of the error? ###
Consistently
### What is the impact to your business because of this problem? ###
DWH can't go live!!! Packages where needed to load the data into the
Datawarehouse-DB.
### Are you running any third-party applications? ###
NO
### If your current issue involves a 3rd party software, has this vendor been co
Does Not Apply
Contact me via : E-mail -> [email protected]
13-MAR-03 17:02:05
Country: GERMANY
The customer has uploaded the following file via MetaLink:
C:\test\coreErik,
Can you identify whether the problem is Warehouse Builder specific or whether it is caused by the database? I will contact the email address that is mentioned in your message.
Thanks,
Mark. -
패치 2141560 적용시 다음의 에러 발생 :SEGMENTATION FAULT(CORE DUMP)
제품 : AOL
작성날짜 : 2002-12-03
패치 2141560 적용시 다음의 에러 발생 :
SEGMENTATION FAULT(CORE DUMP)
=========================================================
PURPOSE
Problem Description
Workaround
please apply prerequiste patches before you apply FA.k:
AD patch 2141471 (11i.AD.F Mini-pack)
FND patch 2278688 (Oracle Self Service Framework Version 5.6E)
Solution Description
Reference Documents
------------------- -
my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description: Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address: 192.168.1.5
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sat Dec 31 13:46:09 2011
Lease Expires: Tue Jan 03 13:46:09 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number: 86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me). -
Application cause java core dump, how can i do?
Hi
In the case, we're using JDK 1.4 and Hibernate on Aix 64 bit, but seems we've got lots of java core even occupied full hard space and cause application crash
system info :
JavaVersion is J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM)
build caix64142ifx-20051115 (SR3 + 94164 + 97403 + 97482)
(note the 64 bit JVM).
-Xmx=1024 and -xms=512, free heap is 330,415,568 bytes, and allocated
is 1073,740,288 bytes.
some core dump :
WebContainer : 4
at java.io.ObjectInputStream.readString()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.readArray()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.readArray()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0() at java.io.ObjectInputStream.readArray()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.readArray()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.readArray()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.readArray()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.readArray()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.readObject()
at java.util.HashMap.readObject()
at sun.reflect.GeneratedMethodAccessor399.invoke()
at sun.reflect.DelegatingMethodAccessorImpl.invoke()
at java.lang.reflect.Method.invoke()
at java.io.ObjectStreamClass.invokeReadObject()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.readObject()
at com.ibm.ws.naming.util.Serialization$1.run()
at com.ibm.ws.security.util.AccessController.doPrivileged()
at com.ibm.ws.naming.util.Serialization.deserializeObject()
at com.ibm.ws.naming.util.Helpers
.processSerializedObjectForLookupExt()
at com.ibm.ws.naming.util.Helpers.processSerializedObjectForLookup()
at com.ibm.ws.naming.jndicos.CNContextImpl.processResolveResults()
at com.ibm.ws.naming.jndicos.CNContextImpl.doLookup()
at com.ibm.ws.naming.jndicos.CNContextImpl.doLookup()
at com.ibm.ws.naming.jndicos.CNContextImpl.lookupExt()
at com.ibm.ws.naming.jndicos.CNContextImpl.lookup()
at com.ibm.ws.naming.util.WsnInitCtx.lookup()
at javax.naming.InitialContext.lookup()
at com.ibm.wsspi.RegistryLoader.getPluginRegistry()
at com.ibm.wsspi.IPluginRegistryFactory.getPluginRegistry()
at ibmjsp.com2E_ibm_2E_ws_2E_console_2E_appmanagement
._collectionTableLayout._jspService()
at com.ibm.ws.jsp.runtime.HttpJspBase.service()
at javax.servlet.http.HttpServlet.service()
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service()
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service()
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter()
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter()
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest()
at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper
.handleRequest()
at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper
.handleRequest()
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.include()
at org.apache.jasper.runtime.JspRuntimeLibrary.include()
at org.apache.jasper.runtime.PageContextImpl.include()
at org.apache.struts.tiles.TilesUtilImpl.doInclude()
at org.apache.struts.tiles.TilesUtil.doInclude()
at org.apache.struts.taglib.tiles.InsertTag.doInclude()
at org.apache.struts.taglib.tiles.InsertTag$InsertHandler.doEndTag()
at org.apache.struts.taglib.tiles.InsertTag.doEndTag()
at ibmjsp.secure.layouts.vboxLayout._jspService()
at com.ibm.ws.jsp.runtime.HttpJspBase.service()
at javax.servlet.http.HttpServlet.service()
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service()
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service()
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter()
... more stack lines not shown ===================================
"WebContainer: 2" shows much
the same stack trace, but extends to include
@com.ibm.ws.console.core.servlet.WSCUrlFilter.continueStoringTaskState()
at com.ibm.ws.console.core.servlet.WSCUrlFilter.doFilter()
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter()
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter()
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter()
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest()
Through IBM, we got those answer :
Looking at the javacore files, we're seeing OOM errors. However,
looking at a heapdump, we're not seeing total heap space exhaustion -
around half of the heap is occupied, and occupancy by the vartious
objects seems, to me at least, to be normal.
The threads
seem to be using the compound class loader to load the customer's
"Hibernate" code - and in the largest of the threads in the heapdump -
(it consumes 258,720,168 bytes), the class org/hibernate/impl/Session
Impl and its children - consume 129,540,864 bytes.
The other 128,785,680 is consumed by org/hibernate/proxy/CGLIBLazyInitia
lizer. There are some other classes that make up the small difference
if you added these numbers.
The class com/softleader/hibernate/util/HibernateUtil and its children
consume 74,932,848 bytes.
I could go on through the heapdump, but there are very large classes
in here, and it may be more advantageous to get a verbosegc turned on
to show the patterns of JVM Heap requirements.
I suppose that the customer is developing this app for a 32bit
architecture market, since they are keeping their JVM Heap within the
32 bit limits. If this is the case, then Xmx=1280 and Xms=384 seems a
more reasonable JVM setting. If they are not, and they want to try
Xmx above 1280, then we have not yet had much experience with 64 bit
but I'd expect that the larger heapsize would benefit the application.
Either way, we need verbosegc turned on to monitor the heap requests.
That mean, i have to turn up JVM Heap size? or what can i do for it?
Thanks a lot.I'd hook up a profiler to your app and monitor it to see what's happening and what objects aren't playing nice.
-
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
To Be Filled By O.E.M. To Be Filled By O.E.M.
iTunes 11.0.0.163
QuickTime 7.1
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod 更新程序库 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver 1.63.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote 提交“1.9.6.143”
Gracenote DSP 1.9.6.45
iTunes 序列号 0012B96815A8CF58
当前用户是管理员。
当前的本地日期与时间是：2002-01-17 20:57:39。
iTunes 并未在安全模式下运行。
WebKit 加速合成已启用。
不支持 HDCP。
支持 Core Media。
视频显示信息
NVIDIA GeForce 6150SE nForce 430
**** 外部插件信息 ****
尚未安装外置插件。
**** 网络连接测试 ****
网络适配器信息
适配器名称： {E6238474-0F0E-4882-A736-658EEE96DF63}
描述： Realtek RTL8102E/RTL8103E Family PCI-E Fast Ethernet NIC - 数据包计划程序微型端口
IP 地址： 192.168.1.100
子网掩码： 255.255.255.0
默认网关： 192.168.1.1
DHCP 已启用： 是
DHCP 服务器： 192.168.1.1
获得租约的时间： Thu Jan 17 20:07:17 2002
租约到期时间： Thu Jan 17 22:07:17 2002
DNS 服务器： 222.88.88.88
222.85.85.85
活动的连接： LAN 连接
已连接： 是
在线： 是
使用调制解调器： 否
使用 LAN： 是
使用代理： 否
防火墙信息
成功连接到 Apple 网站。
连接失败，无法浏览 iTunes Store。
发生未知错误（0x800B0101）。
连接失败，无法从 iTunes Store 购物。
发生未知错误（0x800B0101）。
无法连接到 iPhone 激活服务器。
发生未知错误（0x800B0101）。
无法连接到固件更新服务器。
发生未知错误（0x800B0101）。
成功连接到 Gracenote 服务器。
上次成功访问 iTunes Store 是在：2013-01-04 12:38:48。
这台电脑上的日期与时间的设置不正确。与 iTunes Store 的安全连接可能会失败。
**** CD/DVD 驱动器测试 ****
“LowerFilters”中没有驱动程序。
UpperFilters: GEARAspiWDM (2.2.3.0),
G: ASUS DVD-E818A4, Rev 1.00
驱动器是空的。
**** 设备连通性测试 ****
iPodService 11.0.0.163当前正在运行。
iTunesHelper 11.0.0.163当前正在运行。
Apple Mobile Device service 3.3.0.0当前正在运行。
通用串行总线控制器：
Standard OpenHCD USB Host Controller. 设备工作正常。
Standard Enhanced PCI to USB Host Controller. 设备工作正常。
找不到 FireWire (IEEE 1394) 主机控制器。
已连接的设备的信息：
小C, iPhone 4 (GSM)正在运行固件版本 6.0.1
序列号： DX6JLS8HDP0N
**** 设备同步测试 ****
成功完成同步测试。i cant access to itunes store
Can you walk us through what happens when you try to connect to the Store, please?
Maybe you are looking for
-
Ipod Touch not recognised by Windows 7 or Itunes
Windows 7 recognised my Ipod and was happily charging away but I couldnt open itunes as it said some files were missing so i updated to the newest version of iTunes as of today (3rd Aug). Now my ipod wont sync to iTunes and wheni check the devices an
-
Sharepoint 2013 online/office 365. I am creating site collection programmatically using sharepoint Auto hosted app. Now i want to set "Allow external users who accept sharing invitations and sign in as authenticated users" programmatically after site
-
How to export usb controller custom assignment settings to another computer
Hello everybody is there any way to export Logic 9's USB controller assignments to another computer setup, to work with same controllers bought from a local music store, with even up to 7 usb controllers in one setup? This way, with a preference exp
-
Hello all,I wana ask about how to assocaite the sales order with a demand class ,is it doable??and how? and how to reserve the sales order?please if any one can help and give me extra information I will be thankful. Thanks in advance>>
-
I saw the below article and was wondering if this was a problem with arch linux as well or not. I do not see any thing listed in the advisory section so was not sure about this. http://blogs.computerworld.com/14583/fixing_linux