Service pack for Symbian Anna 025.007.239.04

G'Day,
I have an N8 Vodafail (Au) 059C7Q4
Symbian Anna 025.007.239.04
Just noticed an update - Anna service pack.
Installed it and noticed messages scroll smoother now.
Installation log did say some improvements have been made for photos too but have not yet had tome to try.
Just wonderin if anyone else out there got this too ?
Cheers.

i just got this too. apparently it's been out for 3 months.
There's no dignity in begging for kudos. Do it for the karma.

Similar Messages

"if symbian anna 025.007 softwar update is availab...

can u plz rply me "if symbian anna 025.007 softwar update is available for C7-00 in india"
my product code is 059B8M2 RM-675 SOFTWARE 022.014.00.01
ys or no will sufficint

You can put it that way if you want to... But its Anna as well but with some bug fixes and performance and stability improvements. It may or may not be released in India and even if Nokia decides to release it, the mobile operators may or may not test it and approve it since v22.014 was released only a while ago and they will not be ready to spend money on testing of a minor update. There you go... I guess that should more or less clear your doubts. If at all you get v 25.007, then consider your self lucky.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

Patch for Symbian Anna released? (Nokia E7)

Hi All
I am not sure what is going on.
My E7 was serviced by NOKIA care Point one week ago. Phone came back to me with Symbian Anna and all updates applied (I checked it same day the phone was back)
Today, when checking Applications>SW Update I noticed this:
My Question is:
Is this update about patch for Symbian Anna?
Because here are details of my system:
I am confused because same set of updates came from Nokia when I was updating from Symbian^3 to Anna.
Can any one explain this?

let me give you some more flashes:
1. 7370 reset will tell you that all the 3 updates are required.
2. after doing so, ovi store will not work.
3. you will scour this forum and find out that you have to install 3 files, in proper sequence, reboot system.
4. bad luck.
5. then you will try 3 button reset
6. WOW. ovi store will work after the similar 3 file anna update
7. you will call nokia care line
8. they will tell you that 3 button reset is not nokia recommended and that you will have to "reflash" your device
9. you will lose your cool, especially after having come from the same place already
10. then you will scream out loud in this forum.
11. you will get used to the problem or you will optimistally wait for Belle.
whew... sometimes, i tend to think that if the above process is standard in one order or the other, there is no need for this forum! nokia can post this in a website itself as a
if... then... else... code prose!

Service Pack for Proliant installing successfully but returning failure in OSD task sequence

Building bare metal servers with SCCM 2012 SP1 CU2 OSD and running into an issue with HPs where they attempt to install the Service Pack for Proliant 2013.02.0. I am using a package with a program. Here is the program command line:
Hpsum.exe /use_latest /allow_non_bundle_components /current_credential /silent
The application installs successfully but there is a distinct delay and then errors thrown that fails the TS. Setting 'continue on error' is a work around but not what I want to have in the production environment. How can I get around this issue?
This is the same exact package and program that ran perfectly fine in SCCM 2007, but we are seeing this as a new issue since the migration to SCCM 2012.
I'd like to solve this issue as well as get rid of the "Waiting for job status notification....InstallSoftware"
Any suggestions?
SMSTS.LOG
Invoking Execution Manager to install software InstallSoftware
12/3/2013 9:59:49 AM 1568 (0x0620)
Installing software for PackageID='WCD002D2' ProgramID='Silent install' AdvertID='WC120008' has started, jobID='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
InstallSoftware 12/3/2013 9:59:50 AM
1568 (0x0620)
Setting TSEnv variable 'SMSTSInstallSoftwareJobID_WCD002D2_WC120008_Silent install'='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
InstallSoftware 12/3/2013 9:59:50 AM
1568 (0x0620)
Waiting for installation job to complete.. InstallSoftware
12/3/2013 9:59:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:00:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:00:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:01:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:01:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:02:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:02:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:03:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:03:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:04:20 AM 1568 (0x0620)
Launching command shell. OSDSetupHook
12/3/2013 10:04:25 AM 2696 (0x0A88)
Windows station: WinSta0 OSDSetupHook
12/3/2013 10:04:25 AM 2696 (0x0A88)
Desk"Apple-tab-span" style="white-space:pre;"> OSDSetupHook
12/3/2013 10:04:25 AM 2696 (0x0A88)
executing command: C:\WINDOWS\system32\cmd.exe /k
OSDSetupHook 12/3/2013 10:04:25 AM
2696 (0x0A88)
executed command: C:\WINDOWS\system32\cmd.exe /k
OSDSetupHook 12/3/2013 10:04:25 AM
2696 (0x0A88)
Waiting for job status notification... InstallSoftware
12/3/2013 10:04:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:05:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:05:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:06:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:06:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:07:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:07:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:08:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:08:50 AM 1568 (0x0620)
CompleteExecution received InstallSoftware
12/3/2013 10:09:00 AM 3320 (0x0CF8)
CompleteExecution processed InstallSoftware
12/3/2013 10:09:00 AM 3320 (0x0CF8)
Received job completion notification from Execution Manager
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Installation completed with exit code 0x80070001
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Installation failed with error (0x80070001)
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Setting TSEnv variable 'SMSTSInstallSoftwareJobID_WCD002D2_WC120008_Silent install'=''
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
GetExecRequestMgrInterface successful InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
Releasing job request, jobID='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Releasing of Job Request successful InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
CompleteJob successful InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
Entering ReleaseSource() for D:\_SMSTaskSequence\Packages\WCD002D2
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
reference count 1 for the source D:\_SMSTaskSequence\Packages\WCD002D2 before releasing
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Released the resolved source D:\_SMSTaskSequence\Packages\WCD002D2
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
pInstall->Install(sPackageID, sProgramName), HRESULT=80070001 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,361)
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Install Software failed, hr=0x80070001 InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
Process completed with exit code 2147942401
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Failed to run the action: HP Server Pack for ProLiant 2013.02.
Incorrect function. (Error: 80070001; Source: Windows)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
MP server http://MP_server.company.com. Ports 80,443. CRL=false.
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Setting authenticator TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Set authenticator in transport TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Sending StatusMessage TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Setting message signatures. TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Setting the authenticator. TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
CLibSMSMessageWinHttpTransport::Send: URL: MP_server.company.com:80 CCM_POST /ccm_system/request
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Request was succesful. TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Set a global environment variable _SMSTSLastActionRetCode=-2147024895
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Set a global environment variable _SMSTSLastActionSucceeded=false
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Clear local default environment TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Let the parent group (System Management Install) decides whether to continue execution
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
The execution of the group (System Management Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Failed to run the last action: HP Server Pack for ProLiant 2013.02. Execution of task sequence failed.
Incorrect function. (Error: 80070001; Source: Windows)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)

Hello Guys!
HP ProLiant Support Pack / Service Pack uses different Exit Codes, due to that this software support other operating systems than Windows. Therefore HP has standardized to use other Exit Codes, which Windows Detect as failures.
HPSum Exit Codes:
ExitCode 1 = "Installation Successful"
ExitCode 2 = "Installation Successful, but a reboot is required"
ExitCode 3 = "Installation was canceled, or no components were updated"
EcitCode 9009 = "Installation did not complete. Check the path and make sure that the Installation exists at the specified location"
HP recommends to use following Batch File to workaround this issue for SCCM:
=======================START_BatchFile=============================
:Init
@Echo Off
Cls
:Main
Echo HP Proliant Service Pack Setup
Echo Source : %~dp0
Echo ===============================================================================
Echo Installing the HP Proliant Service Pack Setup
Echo Command: "%~dp0hpsum.exe" /use_latest /target:%COMPUTERNAME% /force /Use_WMI /s
"%~dp0hpsum.exe" /use_latest /target:%COMPUTERNAME% /force /Use_WMI /s
:CheckForErrors
Echo HP Proliant Service Pack Stauts:
If "%errorlevel%"=="0" (
     Echo *******************************************************************************
Echo                            INSTALLATION FAILED!
Echo *******************************************************************************
exit 1
If "%errorlevel%"=="1" (
     Echo Installation Successful!
     exit 0
If "%errorlevel%"=="2" (
     Echo Installation Successful, but a reboot is required.
     exit 3010
If "%errorlevel%"=="3" (
     Echo Installation was canceled, or no components were updated
     exit 0
If "%errorlevel%"=="9009" (
     Echo Installation did not complete. Check the path and make sure that the
Echo Installation exists at the specified location:
Echo Path: %~dp0
Exit 1
:End
Echo An unknown status code was returned from the PSP.
Echo This status code is [%errorlevel%]. This will be treated as a success,
Echo but please check the installation to make sure it completedly properly!
Exit 0
=======================STOP_BatchFile=============================
God Luck!
Best Regards Anders Horgen

Service pack for BO enterprice XI 3.1

Dear Friends,
we are using evalution veriosn of BOE XI 3.1 with 90 days key. i installed BOE XI 3.1 now i want to
update it on highest level of Service Pack can you please tell me how can i obtain latest service pack for
BOE XI 3.1 while we are not customer of BO. We are customer of SAP but when i try to download BO SP.
Its give me error that you are not authorized.
Any help will be higlly Appricated.
Regards
Malik

Try to open an OSS ticket about this and request access to the patches.
Regards,
Stratos

Service Pack for Primavera Contractor v4.1

Hello,
Is there any way to get a service pack for Primavera Contractor v.4.1? I have a computer that we had to replace that had the software downloaded on it which crashed. I want to put the software on the replacement computer with the available license. Please let me know.
Thank you!
Bryce

Primavera Project Management P6 version 7.0 (P6 v7) Service Pack 3 [ID 1275307.1]
You can try the below link but you will still need to sign into Oracle Support with a valid CSI #.
https://updates.oracle.com/Orion/Services/download/p10622440_7000_Generic.zip?aru=13296827&patch_file=p10622440_7000_Generic.zip

Service Pack for iTunes problems?

Does anyone know more about the $49 service pack Apple supposedly has for fixing iTunes 5+ install problems? Is it specific to iTunes, or is it an overall service pack for all known software issues? I am quite confused now by all of the fixes floating around in this discussion (although grateful for the fine assistance of various people) because I can't afford to lose any more functionality on my PC than I already have.
If a service pack does exist, shouldn't Apple provide this for free?
Too bad there isn't a computer products safety commission (like the Consumer Products Safety Commission). If there were, Apple would have to do a recall of this defective product that has harmed a lot of PCs.

Apple is not selling any sort of "service pack". Any charge you may get is for providing the technical support itself (support calls are not free unless you have a Mac that's either less than 90 days old or is under AppleCare), not for providing any patches. iTunes 5.01 has been released and is the only "patch" that I know of for iTunes 5, so if you're having problems with iTunes 5.0, try 5.01.

Service pack for 5.1

""Make sure you grab the latest service pack for 5.1""
wow - where i can get it?

You can try this...to download service pack!!
http://commerce.beasys.com/downloads/weblogic_server.jsp
Regards
Mauricio

Service Pack for WLS 5.1

Hi all,
Does any of you know which was the latest Service Pack for Weblogic Server 5.10? AFAIK, it was SP12, but I can't find information about it or if there was any other service pack for this oldie (I know I shouldn't be using it, but that's my customer's call)
Appreciate any help / pointers you might give me.
Regards

Hi all,
Does any of you know which was the latest Service Pack for Weblogic Server 5.10? AFAIK, it was SP12, but I can't find information about it or if there was any other service pack for this oldie (I know I shouldn't be using it, but that's my customer's call)
Appreciate any help / pointers you might give me.
Regards

Continued development for Symbian Anna?

All,
With the eminent release of the E6 and the Nokia/Windows future are any developers still interested in creating apps for Symbian Anna? I'm more interested in 'useful' apps (book reader apps, checkbook/financial, database integration, etc.) instead of games and music.
I love my E62, but it's just so slow and of course has it's own data transmission limitations. The E6 looks particularly exciting, but I would want to use it for several years to come as I don't upgrade phones that often. Maybe I should limp along until a Nokia Windows business phone is released (a scary thought).
I'd like to hear your thoughts on the matter. Thanks!

Gestapo wrote:
2016 i read in june
The statement was "until 2016", if I recall, which might just as well mean that the last new Symbian models will be done in 2013, but sold (if anyone still buys) and supported (spare parts, warranty, possibly some sw updates) for 2014, 2015.
Nokia's smartphone sales (all models combined, all Symbian) for the last quarter (Apr-Jun) already dropped by 30% with - for the first time in about 15 years - other companies bypassing Nokia in smartphone sales (Apple, Samsung).
Time will tell, of course, but the if Symbian phones are not selling (people are not buying), Nokia is not going to keep making them.

Service packs for wls6.0

How come each service pack for WLS 6.0 requires a download of the whole applications
instead of a patch?

To only get patch or service packs, you should login to websupport.
(http://www.bea.com/support/web.shtml)
Only entitled customers are eligible to receive service packs. Or else you have to
download the whole
bungle which 60 + SP's.
Anne wrote:
How come each service pack for WLS 6.0 requires a download of the whole applications
instead of a patch?

How to find Service Pack for R3 System...

Hi
Its very easy to find Service Pack for BI system.
But once i try to do for R3 System , i find lot of software components like:
SAP_ABA
SAP_BASIS
PI_BASIS
ST-PI
SAP_BS_FND
SAP_BW
WEBCUIF
SAP_AP
SAP_HRCRU
SAP_HRCPT
SAP_HRCPH
SAP_HRCNZ
SAP_HRCNO
SAP_HRCNL
SAP_HRCMY
SAP_HRCMX
and many more... so i m confused which software component i should choose to find exact software component.
Thanks...

Hi,
Log onto your system. From any screen, select System > Status. In the block labelled "SAP system data", hit the magnfying glass. Although there are many objects that can be updated, the most critical is "SAP Basis". Under the column "level" you can see the highest rev you have installed.
Hope it helps.
Thanks and Regards,
MuraliManohar.

Service packs for Weblogic 6.1 with J2EE 1.3 disabled

We are planning to migrate to Weblogic 6.1 from 5.1.
Is BEA supporting 6.1 release with J2EE 1.3 disabled? I see that 6.1
with J2EE 1.3 is at sp4, whereas there is no service pack for 6.1 with
J2EE 1.3 disabled.
If BEA is not supporting 6.1 release with J2EE 1.3 disabled, then we
have to go to 6.1 with J2EE 1.3.

Rakesh Kalra wrote:
We are planning to migrate to Weblogic 6.1 from 5.1.
Is BEA supporting 6.1 release with J2EE 1.3 disabled? I see that 6.1
with J2EE 1.3 is at sp4, whereas there is no service pack for 6.1 with
J2EE 1.3 disabled.
If BEA is not supporting 6.1 release with J2EE 1.3 disabled, then we
have to go to 6.1 with J2EE 1.3.Why is 1.3 a problem for you? In any case, there must be a way to do what you want.
Looking at the Service Packs, the last couple sentences of the description discuss it.
Maybe you would just need help with the WLS Start scripts. Or you would need to start
with a base product that has 1.3 disabled and take it from there. I'm sure someone
could find the files for you, they are just not out in the open.
Best Wishes,
Wayne Scott
http://commerce.bea.com/SoftwareProductDetailWLS?SWName=WebLogic+Server+Service+Pack&SWVersion=Version+6.1&SWPlatform=Service+Pack+2+for+UNIX
Evaluation Product Details
Service Pack 2 for WebLogic Server 6.1 (UNIX platforms)
File Size
47,543,493 Bytes
Description
This service pack contains files that resolve some issues pertaining to the released
product. A detailed list of these issues is provided in the release notes.
The Service Pack upgrade installers for WebLogic Server 6.1 will update all existing
WebLogic installations to run with J2EE 1.3 features enabled when starting the server
with the startscripts provided within the WLS distribution. With J2EE 1.3 features
enabled, WebLogic Server will still inform you whenever an application is deployed that
uses J2EE 1.3 features. If you desire to disable J2EE 1.3 features and you had
originally installed WebLogic Server 6.1 with J2EE 1.3 feature disabled, you can restore
the WebLogic Start scripts from the backups created during the Service Pack
installation. Go to "Viewing and Recovering Files Replaced or Deleted by a Service Pack
Installation" on our Installing BEA WebLogic Server Page.

Service pack for WebLogic 6.1

Here I can find service pack for WebLogic 6.1, Win2K?
Thank you,
Jacob Nikom

Jacob,
If you need just the service pack for WLS 6.1 , you will need to have a
websupport login and password. Please refer to this url for more
information on this.
http://contact.bea.com/bea/www/BEACustRegLogin.jsp
http://websupport.bea.com/custsupp/
Hope this helps
Raj Alagumalai
[email protected] wrote:
http://commerce.beasys.com/downloads/weblogic_server.jsp
"jacob nikom" <[email protected]> wrote in message
news:3bb8c8c7$[email protected]..
Here I can find service pack for WebLogic 6.1, Win2K?
Thank you,
Jacob Nikom

Clarification on 025.007 for Symbian Anna products

Hi all,
as you might have noticed we started rolling out a new update version for the Symbian Anna products.
025.007 only contains some error fixes and is therefore not a mandatory update for N8/C7/C6-01/E7/E6/X7. This means, that not all countries/operators will test and approve this version. The rollout is happening in waves, depending on lcoal testing and approval. If you want to get a notification when the update is available for your phone, please switch on the software update auto check. (You can find it under Options in your phone’s Software Update App.)
BR,
yvonne

I received a symbian Anna service pack of size 1040KB which when installed did not change the version to 025,but said it was meant for usability improvements.It will give me better scrolling in messages and help me get quick location info on photos plus more(it was not mentioned what exactly is this "plus").However it added conversation appl, java run time and conversation server to my installed files list.
In Love With My C6-01:Now running on Nokia Belle!

Service pack for Symbian Anna 025.007.239.04

Similar Messages

Maybe you are looking for