Service Pack Level for IDM 7.2

Dear All,
I have installed a IdM 7.2 in a windows server. I am creating a document for our organization. I came across of a question on how will I able to know what SP Level does my IdM is. I tried searching and checking in the Identity Center > About Identity Center I was able to see System Info. But once I click the System Info button I am receiving an error "System Information is Unavailable at this time".
I also checked already in the usr files of the installation but wasnt able to see any logs in the files.
Does anyone know any other steps on how to check SP Level?
Thank you in advance.
Regards,
Santi

Hi Santi,
Assumption: SAP IDM 7.2 version
You can find the runtime version by checking the dispatcher node.
Designtime version can be found in Identity center node.
Kind regards,
Jai

Similar Messages

Upgrade to CRM 2007: minumun service pack level for other components

Hi all,
I have to upgrade my CRM 5.0 to CRM 2007. CRM is connected to ECC 6.0 and SCM 5.0. What are the minimum SP level for those component? Is there any link to documentations about mandatory SP for not CRM components?
Thanks a lot.

Hello
In the CRM 2007 Master Guide which is available in the [SAP Service Marketplace|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000704565&] I found that SAP ERP 6.0 EHP 3 is recomended and SAP R/3 4.6C SP 53 is the minimum version. No special version is mentioned for SCM 5.0.
Best regards
Gregor

Service pack level & PI basis level for MAM3.0

Hi All,
We are trying to configure our server with MI2.5 and MAM3.0. Can anybody please tell us what are the levels of the service pack and PI basis levels must be there to work with MAM3.0.
Below are the details of the current service pack level and PI BASIS levels of our server.
SAP_BASIS          640     0020     SAPKB64020          SAP Basis Component
SAP_ABA          640     0020     SAPKA64020          Cross-Application Component
ST-PI          2005_1_640     0003     SAPKITLQH3     SAP Solution Tools Plug-In
PI_BASIS     2005_1_640     0012     SAPKIPYJ6C          Basis Plug-In (PI_BASIS) 2005_1_640
SAP_BW          350     0020     SAPKW35020     SAP_BW 350
PI          2004_1_500     0012     SAPKIPZI6C          PI 2003_1_470 : Add-On Delta Upgrade
<i><b>Note: our Middleware and Backend both are in the same server.</b></i>
Your help in this regard is highly appreciated and rewarded too.
Regards,
Murthy

Hi Murthy,
MAM 3.0 backend minimum requirements are:
R/3 4.6C (minimum SP53) with SAP R/3 Plug-in 2004.1 (Minimum SP13)
R/3 4.7 (Minimum SP 27) with SAP R/3 Plug-in 2004.1 (Minimum SP13)
ERP 2004 (Minimum SP11) with SAP R/3 Plug-in 2004.1 (Minimum SP14)
ERP 2005 (Minimum SP6), no Plug-in required
Please be aware that you will need to apply quite a few notes even if you are on the latest SP level for any of this backends.
MAM 3.0 central note references backend central notes for various supported backend. You should take care that appropriate note is analysed and all notes are implemented.
Regards,
larissa Limarova

Latest service pack levels and maintenance updates

I have searched around sun.com and cannot find the place where you can find the current service pack level and current maintenance update for Application server. Does anyone know where to find this information?
Thanks in advance for your help!
Jennifer

Hi
Check the latest versions of service packs and maintenance updates @ http://www.sun.com/download/index.jsp?cat=Application%20%26%20Integration%20Services&tab=3
Thanks
Srinivas

SAP R/3 4.6 B Support pack level for AIX 5.2

Hi,
We have upgraded O.S version from AIX 4.3 to AIX 5.2. Here our environment is SAP R/3 4.6B and DB oracle 8.1.7.
My question: Do we apply any support pack to the system after support pack upgrade. Please find the below support pack level for our current system.
SAP_BASIS      46B           0054    SAPKB46B54
SAP_ABA         46B           0054    SAPKA46B54
SAP_APPL       46B           0054    SAPKH46B54
SAP_HR           46B           0000        -
ST-PI            2005_1_46B    0003    SAPKITLQC3
Please request the feedback.
Thanks & Regards,
Narayana Murthy.

Do we apply any support pack to the system after O.S upgrade ?
( Correction for the below posted mail)

Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment

Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment

Hi.
This is definitely not supported, and I don't know that any work is scheduled in the future
to support this JDK on WLS 5.1.
Having said that, I was able to start WLS 5.1sp12 with JDK 1.4 with no errors. I didn't
exercise any features, however.
Regards,
Michael
Rakesh Gupta wrote:
Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment--
Michael Young
Developer Relations Engineer
BEA Support

IPods and Service Pack 3 for Windows XP

If you have installed Service Pack 3 for Windows XP, an issue may arrise that will not allow iPods to function. You will get an error that the iPod Service Module has experienced an error and needs to close.
If you see this error, first check to see if you can see any of your devices in the Device Manager. To do this, click on Start, the right click on My Computer, then click on the Hardware tab, then click on the Device Manager button. If this window is blank, you will need to call Microsoft directly at 800-642-7676.
The reason that the Device Manager is now blank is that if you were running any Anti-Virus program while Service Pack 3 was being installed, there was a certain file that was prevented from running that was designed to clean up the registry after installation. Since this file did not execute, that is why your Device Manager is now blank and your iPod will not work.
A word of caution though. When you call Microsoft, do not tell them that the reason you are calling is that your iPod does not work due to Service Pack 3. If you say this, they will want to charge you $80.00 for tech support. On the other hand, if you say that you recently installed Service Pack 3 and have noticed that the Device Manager is now empty, you will now get the tech support for free.
I write this for any who might be experiencing this problem as Apple Tech Support has informed me that this is one of their biggest tech support issues in the past couple of months since Service Pack 3 was released.
Gr81isback

Still useful as of 12/30/11. Have ten Lenovo 5042 computers with downgrade licenses to run XP and have a ghosted image from another Lenovo 5042 having and Intel cpu. My target computers all have AMD cpus in them and the image would continuously reboot on
the AMD computers.
Used method 1 and it cleared the problem instantly, many thanks for the post and the time and effort it took to dig up the answer..

Service pack 1 for windows vista home premium

Recently my computer had a virus. I had to do a complete system restore. Now that I have done this I am trying to install the service pack 1 for this operating system and I get to the third step and the progress bar hardly moves. I have let it run for
up to 8 hours and no progression. I tried to install the service pack 2 but it says I need 1 first. Need lots of help on this issue please. Windows update not catching that I need this.

Hi,
During the Windows Vista SP1 installation, this issue occurs when a third-party application holds open a file or locks a file that the Service Pack installation program
has to use. For example, a third-party antivirus or antispyware application may cause this problem. If you are running any third-party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection),
security or anti-virus programs (McAfee, Norton, etc.), I recommend temporarily disabling or shutting them down during the troubleshooting process. Please be sure to re-enable them once the process has completed.
I recommend running Reset Windows Update Tool and System Update Readiness Tool. System resources, such as file data, registry data, and even in-memory data, can develop
inconsistencies during the lifetime of the operating system. These inconsistencies can be caused by various hardware failures or software issues. In some cases, these inconsistencies can affect the Windows servicing store, and they can cause software updates
not to work. We can run Reset Windows Update Tool and System Update Readiness Tool to resolve these inconsistencies. When Reset Windows Update Tool and System Update Readiness Tool detects incorrect manifests, files, or registry data, it might replace the
incorrect data with a corrected version. Please follow the steps below.
Step 1: Run Reset Windows Update Tool and System Update Readiness Tool
1. Please download and run Reset Windows Update Tool from the link below:
http://go.microsoft.com/?linkid=9665683
2. Please download and run System Update Readiness Tool from the link below according to the System Type:
System Update Readiness Tool for Windows Vista 32-bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=2889489c-ee87-4607-8aa5-812e8078ab27&DisplayLang=en
System Update Readiness Tool for Windows Vista 64-bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=14f76773-007c-493f-bece-243bc21ac73d&DisplayLang=en
3. Restart the computer and install Windows Vista SP1. Let’s reinstall
SP1 standalone installer in Clean Boot.
For your reference, I have attached these steps as below:
Step 1: Download Windows Vista Service Pack 1 Standalone Installer
====================================================
1. Download Windows Vista SP1 from the link below according to the System Type:
Windows Vista Service Pack 1 for Windows Vista 32-bit (Size: 544.3MB)
http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en
Windows Vista Service Pack 1 for Windows Vista 64-bit (Size: 873.0MB)
http://www.microsoft.com/downloads/details.aspx?FamilyID=86d267bd-dfcd-47cf-aa76-dc0626dcdf10&DisplayLang=en
2. Please save it on the Desktop.
Step 2: Install Windows Vista SP1 in Clean Boot Mode
=========================================
Please disable all startup items and third party services when booting to avoid conflict when installing
Vista SP1.:
1. Click "Start", type: MSCONFIG in the search box and press Enter.
Note: Please click "Continue" if the "User Account Control" window pops up.
2. Click "Services", check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click "Startup", click "Disable All", click "OK" and restart the computer.
Note: Temporarily disabling the Startup Group only prevents the startup programs from loading at startup. This shouldn't affect the system or other programs. We can manually run these programs later.
4. Please double click the downloaded Windows Vista Service Pack 1 Standalone Installer and follow the instructions to install Windows
Vista SP1.
To restore the computer to use a Normal Startup, repeat step 1 above. Then click "Normal Startup" on the General tab, click "OK", and then restart the computer.
Please take your time with the steps and let me know the results at your earliest convenience. If there are any questions or concerns, please post here for further
research.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Service Pack 2 for Windows 7

Service Pack 2 for Windows 7 were is it my updates only give me pack 1 . Its say windows is not bringing pack 2 out . I think thats realy nice of them to do this to there customers has pack 1 crashs most of my programs and i have to untick it every update
errr mmm thanks . Think ill get a Apple next . I carnt stand we have the power to do wot we wont just spend your money on us ( Micosoft ) should be Ripsoft :)

Hi ,
As Oberwald said, service packs are not designed to fix damaged Windows installations. Also, Microsoft haven’t released Windows 7 SP2 package yet. When it release, it will upload on Microsoft website. Let’s look forward together.
Regards,
Vincent Wang
TechNet Community Support

Suggested Support Pack Level for ECC 6.0 Upgrade - Target

Hi ,
Can someone give us the suggested support pack level for the ECC 6.0 system after the upgrade.
Our current patch level is:
SAP_ABA     700     0012     SAPKA70012
SAP_BASIS     700     0012     SAPKB70012
PI_BASIS     2005_1_700     0012     SAPKIPYJ7C
ST-PI     2005_1_700     0003     SAPKITLQI3
SAP_BW     700     0014     SAPKW70014
SAP_AP     700     0009     SAPKNA7009
SAP_APPL     600     0010     SAPKH60010
SAP_HR     600     0013     SAPKE60013
EA-IPPE     400     0008     SAPKGPID08
EA-APPL     600     0008     SAPKGPAD08
EA-DFPS     600     0008     SAPKGPDD08
EA-FINSERV     600     0008     SAPKGPFD08
EA-GLTRADE     600     0008     SAPKGPGD08
EA-HR     600     0013     SAPKGPHD13
EA-PS     600     0008     SAPKGPPD08
EA-RETAIL     600     0008     SAPKGPRD08
FINBASIS     600     0008     SAPK-60008INFINBASIS
ECC-DIMP     600     0008     SAPK-60008INECCDIMP
ERECRUIT     600     0008     SAPK-60008INERECRUIT
FI-CA     600     0008     SAPK-60008INFICA
FI-CAX     600     0008     SAPK-60008INFICAX
INSURANCE     600     0008     SAPK-60008ININSURANC
IS-CWM     600     0008     SAPK-60008INISCWM
IS-H     600     0008     SAPK-60008INISH
IS-M     600     0008     SAPK-60008INISM
SEM-BW     600     0008     SAPKGS6008
IS-OIL     600     0008     SAPK-60008INISOIL
IS-PS-CA     600     0008     SAPK-60008INISPSCA
IS-UT     600     0008     SAPK-60008INISUT
LSOFE     600     0008     SAPK-60008INLSOFE
IRMIPM     30B     0005     SAPK-30BI7INIRM
IRMGLB     30B     0005     SAPK-30BG7INIRM
ST-A/PI     01K_ECC600     0000     -
GSCDMC     600     0001     SAPK-60001INGSCDMC
RCMGT     601     0001     SAPK-60101INRCMGT
Thanks
Senthil

Hi Senthil,
of course it is always recommended to use the newest Support Package Stack,
but if your system (your business processes) are working fine, I would recommend you to
import support package only then when you have an error or you want to have a special fiunctionality.
Some customers play support packages into the system only twice a year, because the business processes
should be tested after the sp import.
Kind regards
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA

SAP ECC 6.0 service pack level upgrade from 15 to 18 impact on SAP SRM 5.0

Hi All,
What all needs to be tested in SAP SRM when we upgrade SAP ECC6.0 service pack level from 15 to a8.
I am already facing issue in BBPGET VD and HR Interface with SAP SRM.Workflow issue while testing in EBQ.
Kindly let me know is anythings needs to be tested.
Regards
Vivek.

Hello,
There are no known issues related to ECC 6.0 support package upgrade when this system is integrated with SRM 5.0.
Since SRM 5.0 is fully supported with ECC 6.0.
Regards,
Ricardo

Unable to activate after Service Pack 2 for Microsoft Office 2010 (KB2687455) is deployed

I'm having a very strange issue with deploying the "Service Pack 2 for Microsoft Office 2010 (KB2687455)". Here's what I see:
Deploying to a Windows 7 SP1 system fully patched as of 7/29/2013
Using SCCM 2007 R3
Task Sequence installs Office Professional Plus 2010
Task Sequence installs Service Pack 2 for Microsoft Office 2010 (KB2687455)
The Office Professional Plus 2010 install was configured to use our key using the Office Custimization Tool (setup.exe /admin)
When I try to activate the suite using any of the installed applications (word, excel, outlook or powepoint) I get the error "An unspecified error has occurred. Your request cannot be processed at this time. Please try again later. (0x80070190)"
If I repair the install then try the activation again it works right away. This is a good work around for single installs but for my needs of multiple system deployment and for pushing out the Service Pack 2 for Microsoft Office 2010 (KB2687455) to other systems
in my environment this will not work.
Can anyone please suggest a solution to this problem?
Thank you,

Hi
According to my research, this issue occurs when one of the following conditions are true:
If you have CD emulation software installed, a registry key is preventing the hardware ID from being acquired.
A required registry key is not set correctly or is missing.
If you want more detailed information, please refer to the following link:
http://support.microsoft.com/kb/2400124/en-us
Hope it helps
Regards

Support Pack level for R/3 4.7 and BW 3.5 with SAP CRM2007

What should be the Support Pack level for R/3 4.7 and BW 3.5 with SAP CRM2007?
Regards,
Rajesh Banka

>
Rajesh Banka wrote:
> What should be the Support Pack level for R/3 4.7 and BW 3.5 with SAP CRM2007?
>
> Regards,
> Rajesh Banka
Hi Rajesh,
Please see the note '833438', it explains which pack is required in this scenario.
"You cannont connect ERP (R/3) releases lower than 4.6C to CRM 5.0.
All subsequent CRM releases (5.0 or higher) cannot be connected to ERP lower
than (R/3) 4.6C.
These types of system landscapes are not supported by SAP.
If you are using CRM 5.0, you must have implemented Plug-in PI 2004.1
Support Package 10 and, provided you have Basis Release 620 or higher, you
must import PI_BASIS 2005.1 in R/3. --> After you have imported these
plug-ins"
Thanks,
Nitin Sharma

Problem installing Service pack 1 for Windows Vista 32-bit from windows update

I have been trying to install Service Pack 1 for Windows Vista Home (32 bits) through Windows Update many times. The Update panel shows Windows Vista Service Pack 1 (KB936330) is available. I install the update, which by the way, just takes me few minutes curiouslly. The "update succesfully installed" message with the green circle checked on appears. But then, when I check my computer properties, the Service Pack 1 is not there and Windows Updated keeps showing again and again the update for Windows Vista Service Pack 1 (KB936330) is available and that needs to be installed. I don't know what else to do, can you help me please.

Hi:
Try downloading and installing the standalone SP1 file.
http://www.microsoft.com/en-us/download/details.aspx?id=30
If you get it to install that way, go straight to SP2 with the standalone download.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=16468
Paul

Service Pack SP01 for SBO

Hello !
Could someone direct me to a site were I may be able to download Service Pack SP01 for SBO?
Thank you

Direct link: https://smpdl.sap-ag.de/~swdc/012002523100001869582006E/51031793.ZIP?_ACTION=DL_DIRECT (Right click and Save Target As)
Alternative if above does not work:
https://websmp110.sap-ag.de/~sapidb/011000358700007392752004E
Navigate to:
> SAP Business One Products
> Installations
> SAP Business One 2005
> SAP BUSINESS ONE 2005 A
> Installation
> MS SQL SERVER
> Download Tab
Please note that it requires a Proper SAP S-User-number
Message was edited by: Rasmus Jensen

Service Pack Level for IDM 7.2

Similar Messages

Maybe you are looking for