Service Pack needed for ABAP MApping ?

Hi everyone.
i'm trying to activate the ABAP MAPPING but it's no working.
I've done everything SAP documents say. Even i've followed all your posts but it doesn't work.
I wanto to know if ABAP MAPPING is available for Service Pack 9 (the one i have).
Thanks.

Hi
According to help.sap for ABAP Mapping
<i>"To reference the development objects of the ABAP Workbench from interface mappings, customers must assign the following value to the parameter com.sap.aii.repository.mapping.additionaltypes in the exchange profile:
<b>com.sap.aii.repository.mapping.additionaltypes=R3_ABAP|Abap-class;R3_XSLT|XSL (ABAP Engine)</b>"</i>
So go in Exchange Profile and chk whether this parameter has this value.
U can also go thru this blog to test ur mapping
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
Hope it helps.
Regards
Arpit Seth

Similar Messages

IPods and Service Pack 3 for Windows XP

If you have installed Service Pack 3 for Windows XP, an issue may arrise that will not allow iPods to function. You will get an error that the iPod Service Module has experienced an error and needs to close.
If you see this error, first check to see if you can see any of your devices in the Device Manager. To do this, click on Start, the right click on My Computer, then click on the Hardware tab, then click on the Device Manager button. If this window is blank, you will need to call Microsoft directly at 800-642-7676.
The reason that the Device Manager is now blank is that if you were running any Anti-Virus program while Service Pack 3 was being installed, there was a certain file that was prevented from running that was designed to clean up the registry after installation. Since this file did not execute, that is why your Device Manager is now blank and your iPod will not work.
A word of caution though. When you call Microsoft, do not tell them that the reason you are calling is that your iPod does not work due to Service Pack 3. If you say this, they will want to charge you $80.00 for tech support. On the other hand, if you say that you recently installed Service Pack 3 and have noticed that the Device Manager is now empty, you will now get the tech support for free.
I write this for any who might be experiencing this problem as Apple Tech Support has informed me that this is one of their biggest tech support issues in the past couple of months since Service Pack 3 was released.
Gr81isback

Still useful as of 12/30/11. Have ten Lenovo 5042 computers with downgrade licenses to run XP and have a ghosted image from another Lenovo 5042 having and Intel cpu. My target computers all have AMD cpus in them and the image would continuously reboot on
the AMD computers.
Used method 1 and it cleared the problem instantly, many thanks for the post and the time and effort it took to dig up the answer..

Service pack 1 for windows vista home premium

Recently my computer had a virus. I had to do a complete system restore. Now that I have done this I am trying to install the service pack 1 for this operating system and I get to the third step and the progress bar hardly moves. I have let it run for
up to 8 hours and no progression. I tried to install the service pack 2 but it says I need 1 first. Need lots of help on this issue please. Windows update not catching that I need this.

Hi,
During the Windows Vista SP1 installation, this issue occurs when a third-party application holds open a file or locks a file that the Service Pack installation program
has to use. For example, a third-party antivirus or antispyware application may cause this problem. If you are running any third-party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection),
security or anti-virus programs (McAfee, Norton, etc.), I recommend temporarily disabling or shutting them down during the troubleshooting process. Please be sure to re-enable them once the process has completed.
I recommend running Reset Windows Update Tool and System Update Readiness Tool. System resources, such as file data, registry data, and even in-memory data, can develop
inconsistencies during the lifetime of the operating system. These inconsistencies can be caused by various hardware failures or software issues. In some cases, these inconsistencies can affect the Windows servicing store, and they can cause software updates
not to work. We can run Reset Windows Update Tool and System Update Readiness Tool to resolve these inconsistencies. When Reset Windows Update Tool and System Update Readiness Tool detects incorrect manifests, files, or registry data, it might replace the
incorrect data with a corrected version. Please follow the steps below.
Step 1: Run Reset Windows Update Tool and System Update Readiness Tool
1. Please download and run Reset Windows Update Tool from the link below:
http://go.microsoft.com/?linkid=9665683
2. Please download and run System Update Readiness Tool from the link below according to the System Type:
System Update Readiness Tool for Windows Vista 32-bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=2889489c-ee87-4607-8aa5-812e8078ab27&DisplayLang=en
System Update Readiness Tool for Windows Vista 64-bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=14f76773-007c-493f-bece-243bc21ac73d&DisplayLang=en
3. Restart the computer and install Windows Vista SP1. Let’s reinstall
SP1 standalone installer in Clean Boot.
For your reference, I have attached these steps as below:
Step 1: Download Windows Vista Service Pack 1 Standalone Installer
====================================================
1. Download Windows Vista SP1 from the link below according to the System Type:
Windows Vista Service Pack 1 for Windows Vista 32-bit (Size: 544.3MB)
http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en
Windows Vista Service Pack 1 for Windows Vista 64-bit (Size: 873.0MB)
http://www.microsoft.com/downloads/details.aspx?FamilyID=86d267bd-dfcd-47cf-aa76-dc0626dcdf10&DisplayLang=en
2. Please save it on the Desktop.
Step 2: Install Windows Vista SP1 in Clean Boot Mode
=========================================
Please disable all startup items and third party services when booting to avoid conflict when installing
Vista SP1.:
1. Click "Start", type: MSCONFIG in the search box and press Enter.
Note: Please click "Continue" if the "User Account Control" window pops up.
2. Click "Services", check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click "Startup", click "Disable All", click "OK" and restart the computer.
Note: Temporarily disabling the Startup Group only prevents the startup programs from loading at startup. This shouldn't affect the system or other programs. We can manually run these programs later.
4. Please double click the downloaded Windows Vista Service Pack 1 Standalone Installer and follow the instructions to install Windows
Vista SP1.
To restore the computer to use a Normal Startup, repeat step 1 above. Then click "Normal Startup" on the General tab, click "OK", and then restart the computer.
Please take your time with the steps and let me know the results at your earliest convenience. If there are any questions or concerns, please post here for further
research.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Unable to activate after Service Pack 2 for Microsoft Office 2010 (KB2687455) is deployed

I'm having a very strange issue with deploying the "Service Pack 2 for Microsoft Office 2010 (KB2687455)". Here's what I see:
Deploying to a Windows 7 SP1 system fully patched as of 7/29/2013
Using SCCM 2007 R3
Task Sequence installs Office Professional Plus 2010
Task Sequence installs Service Pack 2 for Microsoft Office 2010 (KB2687455)
The Office Professional Plus 2010 install was configured to use our key using the Office Custimization Tool (setup.exe /admin)
When I try to activate the suite using any of the installed applications (word, excel, outlook or powepoint) I get the error "An unspecified error has occurred. Your request cannot be processed at this time. Please try again later. (0x80070190)"
If I repair the install then try the activation again it works right away. This is a good work around for single installs but for my needs of multiple system deployment and for pushing out the Service Pack 2 for Microsoft Office 2010 (KB2687455) to other systems
in my environment this will not work.
Can anyone please suggest a solution to this problem?
Thank you,

Hi
According to my research, this issue occurs when one of the following conditions are true:
If you have CD emulation software installed, a registry key is preventing the hardware ID from being acquired.
A required registry key is not set correctly or is missing.
If you want more detailed information, please refer to the following link:
http://support.microsoft.com/kb/2400124/en-us
Hope it helps
Regards

Problem installing Service pack 1 for Windows Vista 32-bit from windows update

I have been trying to install Service Pack 1 for Windows Vista Home (32 bits) through Windows Update many times. The Update panel shows Windows Vista Service Pack 1 (KB936330) is available. I install the update, which by the way, just takes me few minutes curiouslly. The "update succesfully installed" message with the green circle checked on appears. But then, when I check my computer properties, the Service Pack 1 is not there and Windows Updated keeps showing again and again the update for Windows Vista Service Pack 1 (KB936330) is available and that needs to be installed. I don't know what else to do, can you help me please.

Hi:
Try downloading and installing the standalone SP1 file.
http://www.microsoft.com/en-us/download/details.aspx?id=30
If you get it to install that way, go straight to SP2 with the standalone download.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=16468
Paul

Service pack 3 for wls platform or server 8.1 ?

Hello Folks,
Might anyone know when server platform 8.1 service pack 3 is due for release ?
Or is it out already ? I see the release notes are available!
I'm logging in with valid support id, still see sp2 for download.
thanks!
DM

Does anyone know why I can not pass the login page (using my registered
name) before opening the downlaod page ?
"giuseppe" <[email protected]> wrote in message
news:[email protected]..
http://e-docs.bea.com/wls/docs61/install/instsp.html#1074972
giuseppe
"kevin" <[email protected]> wrote in message
news:[email protected]..
Hi,
I was trying to download service pack 3 for WLS 6.1 but could not find
the
place.
Do I need to purchase the support in order to download the service pack?
I
registered online already as a normal user.
Where is the link if anyone can get free download for the service pack 3
>>
Thanks in advance

Difference between Service Pack 5 for CR-XI (R2) and BOE-XI (R2)

Difference between "Service Pack 5" for CR-XI (R2) and BOE-XI (R2)
========
There are two different "Service Pack 5" files available for download...
CRYSTAL REPORTS XI (R2) = crxir2win_sp5.exe
BUSINESS OBJECTS ENTERPRISE XI (R2) = boxir2win_sp5.exe
If we have workstations that have both CRYSTAL REPORTS XI and the BUSINESS OBJECTS ENTERPRISE "Client Tools" installed locally on them do I need to run both versions of the "Service Pack 5" - or will running just one (1) of them update all the installed desktop tools...?
Thanks in advance!

I think the CR patch has client issues only.
The enterrpsie one is sufficient in most cases. Is that CR XIR1 or CR XIR2 client you have installed? Make sure it's CR XIR2 or you could run into issues
Regards,
Tim

Services pack 1 for Vista Home premium will not install!

Services pack 1 keeps failing to install on the second stage. I have tried to install it about 8 or 9 times now but still the same. It just completes the first stage then fails.
Please can you advise me what I need to done to get this to install?
Kind regards
Adam Betts

Hi,
During the Windows Vista SP1 installation, this issue occurs when a third-party application holds open a file or locks a file that the Service Pack installation program
has to use. For example, a third-party antivirus or antispyware application may cause this problem. If you are running any third-party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection),
security or anti-virus programs (McAfee, Norton, etc.), I recommend temporarily disabling or shutting them down during the troubleshooting process. Please be sure to re-enable them once the process has completed.
I recommend running Reset Windows Update Tool and System Update Readiness Tool. System resources, such as file data, registry data, and even in-memory data, can develop
inconsistencies during the lifetime of the operating system. These inconsistencies can be caused by various hardware failures or software issues. In some cases, these inconsistencies can affect the Windows servicing store, and they can cause software updates
not to work. We can run Reset Windows Update Tool and System Update Readiness Tool to resolve these inconsistencies. When Reset Windows Update Tool and System Update Readiness Tool detects incorrect manifests, files, or registry data, it might replace the
incorrect data with a corrected version. Please follow the steps below.
Step 1: Run Reset Windows Update Tool and System Update Readiness Tool
1. Please download and run Reset Windows Update Tool from the link below:
http://go.microsoft.com/?linkid=9665683
2. Please download and run System Update Readiness Tool from the link below according to the System Type:
System Update Readiness Tool for Windows Vista 32-bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=2889489c-ee87-4607-8aa5-812e8078ab27&DisplayLang=en
System Update Readiness Tool for Windows Vista 64-bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=14f76773-007c-493f-bece-243bc21ac73d&DisplayLang=en
3. Restart the computer and install Windows Vista SP1. Let’s reinstall
SP1 standalone installer in Clean Boot.
For your reference, I have attached these steps as below:
Step 1: Download Windows Vista Service Pack 1 Standalone Installer
====================================================
1. Download Windows Vista SP1 from the link below according to the System Type:
Windows Vista Service Pack 1 for Windows Vista 32-bit (Size: 544.3MB)
http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en
Windows Vista Service Pack 1 for Windows Vista 64-bit (Size: 873.0MB)
http://www.microsoft.com/downloads/details.aspx?FamilyID=86d267bd-dfcd-47cf-aa76-dc0626dcdf10&DisplayLang=en
2. Please save it on the Desktop.
Step 2: Install Windows Vista SP1 in Clean Boot Mode
=========================================
Please disable all startup items and third party services when booting to avoid conflict when installing
Vista SP1.:
1. Click "Start", type: MSCONFIG in the search box and press Enter.
Note: Please click "Continue" if the "User Account Control" window pops up.
2. Click "Services", check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click "Startup", click "Disable All", click "OK" and restart the computer.
Note: Temporarily disabling the Startup Group only prevents the startup programs from loading at startup. This shouldn't affect the system or other programs. We can manually run these programs later.
4. Please double click the downloaded Windows Vista Service Pack 1 Standalone Installer and follow the instructions to install Windows
Vista SP1.
To restore the computer to use a Normal Startup, repeat step 1 above. Then click "Normal Startup" on the General tab, click "OK", and then restart the computer.
Please take your time with the steps and let me know the results at your earliest convenience. If there are any questions or concerns, please post here for further
research.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

When we wil go for abap mapping ??

Hi,
As we know there are graphical, XSLT, JAVA mappings are there apart from ABAP mapping. I have gone through below weblog.
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
and also help.
http://help.sap.com/saphelp_nw04/helpdata/en/12/05731a10264057badc32d3d3957015/frameset.htm
None of them says ABAP mapping is either faster or stable as compared to other mappings. Even though it is the case, still when we will go for abap mapping ??
Is it like that it is totally depend on the available resources in hand ??
thanks
kumar

> The SAP XI/PI mapping is the most efficient as it
> only loads the part of the source message that are
> used to create the target message(s) at runtime.
>
> Java and XSLT have to load the whole message into
> memory to process the message. This can be
> inefficient and if dealing with large messages can
> cause issues.
About your statement.
If you consider the field mapping (or UDF) runtime, then you are correct. But if you consider the whole mapping runtime, you also have to "load" the full message in message mapping, obviously. What happens is that it is transparent to the developer, since loading and parsing is done by standard. But message mapping also deals with loading and parsing the whole message (and it is done with Java underneath). Then I don't think message mapping will have a significantly better/worse performance, when compared with Java mappings (performing normal xml processing methods).
As for XSLT, the performance problems happens because you have a XSLT processor running over Java VM. Then, if you have heavy load on it, the mapping runtime will consume the resources necessary to run the xslt processor (which is, by itself, very resource consuming) and also to treat that heavy input.
Regards,
Henrique.

Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment

Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment

Hi.
This is definitely not supported, and I don't know that any work is scheduled in the future
to support this JDK on WLS 5.1.
Having said that, I was able to start WLS 5.1sp12 with JDK 1.4 with no errors. I didn't
exercise any features, however.
Regards,
Michael
Rakesh Gupta wrote:
Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment--
Michael Young
Developer Relations Engineer
BEA Support

Service Pack 2 for Windows 7

Service Pack 2 for Windows 7 were is it my updates only give me pack 1 . Its say windows is not bringing pack 2 out . I think thats realy nice of them to do this to there customers has pack 1 crashs most of my programs and i have to untick it every update
errr mmm thanks . Think ill get a Apple next . I carnt stand we have the power to do wot we wont just spend your money on us ( Micosoft ) should be Ripsoft :)

Hi ,
As Oberwald said, service packs are not designed to fix damaged Windows installations. Also, Microsoft haven’t released Windows 7 SP2 package yet. When it release, it will upload on Microsoft website. Let’s look forward together.
Regards,
Vincent Wang
TechNet Community Support

Detailed example for ABAP mapping in XI7.0 with code in class builder

hi experts,
will any one one send me the detailed example(including navigation steps) for ABAP mapping in XI7.0 with code in class builder.
Thankin u,

Hi,
Just go through the below link.It will guide you how to do abap mapping:
The guide is on XI 3.0 but the same can be used in 7.0 also.
The How-to-guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
This link will provide more information regarding program point of view.
http://help.sap.com/saphelp_nw04/helpdata/en/86/8280ba12d511d5991b00508b6b8b11/content.htm
Thanks,
Kishore.
Edited by: Kishore on Mar 14, 2008 4:35 AM

Service Pack SP01 for SBO

Hello !
Could someone direct me to a site were I may be able to download Service Pack SP01 for SBO?
Thank you

Direct link: https://smpdl.sap-ag.de/~swdc/012002523100001869582006E/51031793.ZIP?_ACTION=DL_DIRECT (Right click and Save Target As)
Alternative if above does not work:
https://websmp110.sap-ag.de/~sapidb/011000358700007392752004E
Navigate to:
> SAP Business One Products
> Installations
> SAP Business One 2005
> SAP BUSINESS ONE 2005 A
> Installation
> MS SQL SERVER
> Download Tab
Please note that it requires a Proper SAP S-User-number
Message was edited by: Rasmus Jensen

Service pack 9 for 5.1

Anyone out there having problems using service pack 9 for Weblogic application
server 5.1? I install it, and get a slew of java.lang.NoClassDefFoundError, and
java.util.MissingResourceException (from a resource bundle) errors.
Its really quirky cause the errors aren't thrown on every jsp .. just a few. And
on one page, a wierd pattern that emerges is:
Reboot the server.
Call my page an get MissingResourceExcpetion
Don't do a thing, except request that same page again.
Now I get a NoClassDefFoundError error
Subsequent requests get a NoClassDefFoundError
Remove service pack 9 and reboot
Request the same page.
Loads fine ????

Yea, I noticed that recently. If I back out to sp5, this is not a problem.
With sp9, it seems to want to recompile every time I access the page. This
should be reported as a bug.
Jim
"Rich" <[email protected]> wrote in message
news:3b00012f$[email protected]..
>
After running some tests, it seems the crux of the problem may be thatWeblogic
(with the service pack) is no longer compiling and deploying jspscorrectly. If
I make a change to a jsp, the change does not show up at run time. Eventhough
it appears as though weblogic is compiling the jsp. Furthermore, if Idon't change
a jsp, and instead just reload the same page, it appears as thoughWeblogic is
still trying to recompile the jsp as it takes several seconds for a simplepage
to render.
Strange.
Please note that if I remove the service pack, everything works fine. Doesthis
sound familiar to anyone?

Can't install service pack 1 for Windows 7 64bits - ERROR_IO_DEVICE(0x8007045d)

Hello
everyone.
I can
not install
Service Pack
1
for Windows
7 64-bit version
I've tried
the Windows
Update, tried all the solutions in Micrososft help
(installed
Preparation Tool
for
Windows System Update
7
for x64-based Systems, disabled
anti-virus,
rebooted,
tried
again ....)
and nothing.
At
the end always gives
the error:
Unable to
perform the request due
to
an error
of I / O
device -
Details - Error:
ERROR_IO_DEVICE
(0x8007045D).
Can anyone
help me?
Thank you.

Hi,
Try to use Chkdsk tool to check if it could fix this issue:
1.
Type cmd in the Start Search box, right-click cmd.exe in the Programs list, and then click Run as administrator.
If you are prompted for an administrator password or for confirmation, type your password, or click Continue.
2.
At a command prompt, type the following command, and then press ENTER:
Chkdsk /R X:
In this command, X: is a placeholder that represents the drive letter of the volume that you want to check.
3.
Press Y when you are prompted to check the disk the next time that the system restarts.
4.
Close all applications, and then restart.
Meanwhile, please try to download Windows 7 SP1 package and then install it to check if this issue persists.
Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
Hope it helps.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the th
Thank you very much! It worked.

Service Pack needed for ABAP MApping ?

Similar Messages

Maybe you are looking for