Service Plane in Preventive Maintainance

I am creating service plane from the service contract, for example Quarterly require service order,
i created service contract and added preventive service plane as quarterly
i configured system to trigger action from contract preventive service to create  service order action on save (Action not from report) After   releasing contract system triggering action and created first service order, now my question is service order for the next 3 quarter trigger automatically according to service plan or i have to set the action monitor to trigger action.
Regards
Thanks In advance
Raju

HI,
As per the configuration that you have done, the next service order will not get triggered automatically until and unless someone edit's and saves the service contract when the next interval is reached.
The standard way is to execute the action using selection report and creating a Background job to trigger service order at regular intervals.
Regards,
PP

Similar Messages

  • Creation of Service Order from Service Plan

    Hi Experts,
    I am working on sap crm 5.0 version
    Pls help in the service order creation from service plan  document
    I have Created a service plan product and maintained a service plan template with an interval of 3months
    In Service Plan to service order action  i am using the Standard method call
    CREATE_ORDER_SRVPLAN in the action profile and Action profile Start Condtion 
    Start of interval equal to todays date . when i am executing the action
    First service order is getting created immediately on the serviceplan Creation date.
    Subsequent service orders are getting generated respectively as per defined frequency .
    So I am getting one extra service order . how to restrict the additional service order creation and
    order creation to happen as per template frequency
    Regards,
    Prajit.P

    Hi vishant,
    thanks for ur quick reply.
    I am not able to find the scheduling type as u mentioned for changing the planning start date in template.   I am using the standard date profile SERVPLAN in my  service plan action profile
    Please suggest me the daterule i need to select in the date type start of interval  in my date profile
    Regards,
    Prajit.P

  • Price in Service Plan

    Hi ,
    How to maintain and Determine the price in Service Plan (Contract dependent).
    I have used an item category SPLA,and service plan product. Maintained the price in product conditions tab.
    But in Contract line item, there is no Conditions tab and also no Net value is displayed.
    Appreciate any help,
    Thanks,

    Hi,
    Please check whether the item category SPLA is having the "Pricing Indicator" - Active or not. As per standard for Service Plan Business category - its Inactive.
    Also check for the pricing determination.
    Regards

  • Copy of service plan item SPLA in contracts not working

    Hi,
    1. I have created a service plan product SP (item category group SPLA)
    2. I copied the standard trans SC -> ZSC and item category SPLA -> ZSPL
    3. I then maintained the determination as per the standard.
    I have not changed any of the attributes of ZSC and ZSPL from the standard (apart from the name). But when I enter the service plan product SP as a item in ZSP (ZSPL gets determined) but I do not get the planning relevant fields such as scheduling type, scheduling rule, etc... Instead I get tabs at the item level which are for a contract product and not a plan product.
    Can someone pls tell me what could be wrong since there are absolutely no changes being done to the standard and plainly a copy is created.
    Regards,
    DP.

    Were you able to resolve this issue. We are facing the same.
    Thank you

  • Copy  Ibase Component from Service Contract to Service Plan

    HI Experts,
    I  am creating a Service Contract by maintaining the Ibase Component in the Product list at item level
    and I am doing followup transaction service plan and from service plan to service order followup
    But  the Ibase Component is not getting Copied from service Contract to service plan transaction  as well
    as from serivce plan to service order transaction.
    Pls help me in this regard.
    Regards
    Pavan.A

    Hi Pavan,
    You can use copy control BADI to achieve this.
    The badi to use is 'CRM_COPY_BADI'.  You need to configure the transaction copy control to trigger this badi.
    Look at methods REFOBJ,  SERVICE_I and SERVICEPLAN_I.
    One of this methids should allow you to do this.
    Regards,
    Surendar

  • Dates getting wiped from Service Plan line item

    Hi All,
    We are currently facing an issue in the dates management on the service contracts. When we create a service contract and without saving if we change start date at the header we come across the following issues
    1) Date rule gets wipes out from the service contract items.
    2) All the dates maintained at the service plan line item are empty.
    Contract header and Contract item has the same custom date profile .
    For the service plan line item its a standard date profile SRVPLAN.
    It will  be helpful in getting some pointers towards the issue or if someone has faced similar problem before.
    Regards
    Sohit

    Hello Moises,
    Can you give some details on how you managed to get this solved?
    Thx
    Nicolas

  • Service Plan Logic

    Hi
    I have dis all the customozing for Service Plan Scenario, but i'm still not clear what ia have to do if ia want for example a 12 MNonth service, 1 service per month.
    I  dont't know exactly if i have to create one interval per month or notr, and how the system do the calculation from one date to another, after the action is executed for example to the first month, how or where store the next date for the next execution.
    Any clarification beyond the help.sap.comn will be aprreciated.
    Best Regards to all

    Greetings Brendan,
    Looks like you could use the Cycle Set functionality, which combines the features of Multiple Counter and Maintenance Strategy plans. This allows you to schedule various service types based on distinct cycle sets.
    Check the following pages for useful information:
    Cycle Set - Plant Maintenance (PM) - SAP Library
    Cycle Set Sequence in Multiple Counter Plan - Maintenance Planning - SAP Library
    Re:Preventive Maintenance -Multiple Counter Plans
    Multiple counter plan
    Multiple Counters
    Cycle sets in Counter plan

  • Auto creation of service orders from service plans using action management

    Hi,
    We are using service plan products in service contracts where in serviceorders are created according to the plans for the duration of the contracts according to the defined frequency.
    The processing for the action is set as "Immediate processing" so that the order is created the moment the deadline is reached. The order is created using the method "CREATE_ORDER_SRVPLAN".
    The contract is created and released and with all the line items (including the service plan line items). The schedule condition is such that => all the orders due in a particular month are created on the first of that month. e.g. plan orders for 15.01.2009, 30.01.2009, etc (i.e.,all the orders due in Jan 2008) will be created on the 01st of Jan 2008.
    As per this definition, the relevant actions get scheduled, BUT DO NOT GET EXECUTED. The moment I just go to the edit mode in the document and save (without making any changes) the action gets executed and the service order gets created.
    The requirement is that the moment the deadline is reached the action should get executed and there should be no need to edit the contract since the processing is kept as immediate.
    Please advice further.
    Warm regards,
    DP

    Hi Cenk/Pepe,
    Thanks a lot for the response.
    I did schedule the report and it gets executed as per the schedule. But it does not execute the actions. As a output it just logs "3 actions selected". What I want is that it should actually go ahead and execute these actions and not just select them.
    Kindly advice on the same.
    Regards,
    DP

  • Where can I buy a NEW iPhone WITHOUT a service plan?

    I have an iTouch now, I'm sell it.
    I want to have external speakers for apps and alarms.
    I do not want iTouch 2nd generation.
    I do not currently need it as a phone, but would like to have it for when I am ready.
    Is it possible to purchase the latest iPhone without any phone plan? When I go through the steps to purchase an iPhone from apple.com it doesn't have a "no plan" option.
    Do other places online / B&M sell iPhones or only apple.com and apple stores? (I do not want a used or refurbished)
    Surely I can still get a hold of an NEW iPhone without a service plan... but where and for how much?

    You can't buy a new iPhone in the US without a plan. Even if you could buy one, it would not work (even as an iPod) until activated with a cell phone provider. You would have to buy a used iPhone that had been activated. Be sure to get a US model (or one for your country if you aren't in the US). Check the part numbers in the right column of
    <http://support.apple.com/kb/HT1937>
    to make sure it is the correct version for your country.
    An officially unlocked one from one of the countries that sell them would also be OK, but any repair would have to be done in its original country. It would have to have been activated in some country, also.

  • HT1688 Can you please help me. I purchased the new Apple I 4s phone from AT&T. I bought it out right. NO CONTRACT!! I paid almost $1000.00 for it. I then, had it enrolled it in my company's  ATT service plan. They paid the bill for my service. Since, I ha

    Can you please help me. I purchased the new Apple I 4s phone from AT&amp;T. I bought it out right. NO CONTRACT!! I paid almost $1000.00 for it. I then, had it enrolled it in my company's  ATT service plan. They paid the bill for my service. Since, I have left the company. I have retained, and assumed financial responsibility for the phone, and the phone number with AT&amp;T. The same day I assumed ifinancial responsibility, I had the phone number ported to a new service provider. ( Straight Talk ) After doing so, my phone worked fine. (as far as cellular service) NO DATA Service !!!! I have been on the phone with AT&amp;T, Straight Talk, and Apple, FOR HOURS over TWO days!!! Trying  to get this problem resolved. All I need to do, is change my APN settings (access point name ) settings. Its  my phone!!! Why does any body have this APN menu locked from me??? I've been on the phone for two days between, AT&amp;T, Straight Talk, and Apple products technical support teams. Everybody points the finger at the next guy!! What can I do to get the phone, that I paid for, work  for more than just a phone, and a paper weigh?
    PLEASE HELP ME!!!!!
    Jason
    Sent from my iPhone
    <Email Edited by Host>

    Wow... you seriously over paid for an iPhone.
    That probably explains why you have/had no clue you were purchasing a locked device and think it's an Apple problem to get it unlocked.

  • Error while creating new app service plan for a webapp

    Greetings !
    I have a new webapp created and I want to move it a separate web app service plan to apply custom domain (Not available on free tier). From the new Portal I try to create new Web App Service plan and get this error.
    "Failed to create App Service plan.
    Failed to create App Service plan <App Service Plan Name>. There was an error processing your request. Please try again in a few moments."
    Even while creation of the web app if I select create new App Service Plan it automatically goes into Free Plan.
    Please help.
    Thanks Paz

    Hello Parvez Alam,
    The issue of not being able to create a new App Service Plan is now fixed. I tried to reproduce this and was able to create the App Service Plan Successfully.
    You should now be able to create the App Service Plan from the New portal. Also, the App Service Plan concept is only availaible in the new portal and not the existing portal.
    You can refer to the link below for more information on this:
    http://azure.microsoft.com/en-in/documentation/articles/azure-web-sites-web-hosting-plans-in-depth-overview/
    Thanks,
    Syed Irfan Hussain

  • Logon Error Message - Enterprise Services Builder address not maintained

    Hi Experts,
    I'm about to start the configuration on PI PROD (PI 7.1) server, but I keep encountering an error, saying "Service cannot be reached"
    Service cannot be reached
    What has happened?
    URL http://hostname:port/nwa call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system PIP with error code 404 and for the reason Not found.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If it is a valid URL, check whether service /nwa is active in transaction SICF.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:XXXXX_PIP_00-v:0-s:404-r:Notfound
    HTTP 404 - Not found
    Your SAP Internet Communication Framework Team
    What's more weird is that I can't launch sxmb_ifr because 'Enterprise Services Builder address not maintained'.
    I already made some RFC Destination such as AI_DIRECTORY_JCOSERVER, AI_RUNTIME_JCOSERVER, LCRSAPRFC, and SAPSLDAPI and when I test the connection, here's the error message said 'Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67'
    Thanks for the reply.

    Hello,
    Check if you have more than one system. If so, check whether host, port and URL of startpage are maintained on the correct one.
    Also, please follow the MANUAL steps of the SAP Help link below:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
    Ensure you have created the RFC Destinations in the ABAP and Java Environment
    You need to create the following RFC destinations in transaction SM59
    (ABAP) and the Visual Administrator (Java):
    AI_RUNTIME_JCOSERVER
    AI_DIRECTORY_JCOSERVER
    LCRSAPRFC
    SAPSLDAPI
    Last, please check whether, In tcode SM59, the destination INTEGRATION_DIRECTORY_HMI.
    The user maintained in the Logon tab should be PIISUSER
    and ensure he password is correct,and check if the destination will test successfully.
    All of those will solve this issue
    Regards,
    Caio Cagnani

  • Define a Service Plan in the transaction "solution_manager"

    Dear community,
    has anyone of you an idea how to configure the service plan in the SAP solution manager? I already tried to open the transaction "solution_manager" --> operations --> Delivery of SAP Services --> Service Plan
    There I get the message: "Last service plan update [at SAP]: 00.00.0000 00:00:00; Last solution master data update [at SAP]: 17.04.2007 02:15:27"
    So the data of my solition should be sent to SAP. But when I try to get the service plan from SAP by clicking the button: "Get current service plan from SAP" I only get the error message "There is no new service plan to be collected by S000XXXXXXX from destination SAP-OSS"
    Has onyone an idea what I have got to do, to get the service plan from SAP?
    Many thanks in advance and kind regards
    Michael

    Hi Michael,
    - Service Plans are defined at SAP (in the SAP internal backend systems).
    - Service Plans are linked at SAP to the Solution Landscape (which you have successfully transferred to SAP, indicated by "Last solution master data update [at SAP]").
    - Service Plans are collected from SAP (triggered by your Solution Manager system). You will see the results.
    Potential reasons, why no service plan can be collected for you:
    - used S-User is not assigned to the Solution Manager installation / customer number
    - no service (for example Technical Integration Check, Solution Management Assessment) is scheduled yor you.
    - your Solution Landscape has not be assigned to the Service Plan at SAP (in this case, contact the SAP Support, which is responsible handling service contracts).
    Best regards,
    Ruediger Stoecker

  • Service Plan

    Hi Experts
                               we are working on service contract with service plan item.we are creating service plans for every three months.At the time of creating service contract with Plan item start of interval is showing creation of contract date.Once i  save the contract start of interval changing to 400+ years(ex-2010 to 2452).Due to this it is creating nearly 1800 service orders insted of four(ex-yrs 442 X 4).we are using standard date profile and standard item category(SPLA) only.what could be the reason for changing start of interval. Please help us on this issue.
    Regards
    Sreedhar
    Please anyone suggest reason for this issue

    Hi,
    Try using standard service plan order type with std date profile and check if the same problem exists.
    I think there might some problem in date profile.
    Regards,
    PP

  • Service Plan Simulation in CRM 5.0 SR1

    Hello,
    When simulating a contract-based service plan, I am getting the error "CRM_LEASING_COPY103". This is strange as I am not working in LAM. The error text:
    "..You want to determine a pricing process for sales organization  and distribution channel . However, no pricing process has been defined for this combination in Customizing...".
    I searched for OSS notes but without luck. I can't make heads or tails of this, as the scenario I'm working in is purely a service scenario (service contract w/service plan generating planned service orders).
    Thanks in advance for the assistance.
    Allon Riczker

    Hi,
    Thanks for the response
    I am not talking about Service Order. I have requirement to create a Service Complaint. For that the transaction is CRMD_BUS2000120. Now I need to find the function modules/RFC available for this requirement.
    Hope it clarifies .
    Even I have found function module called -CRM_COMPLAINT_API_CREATE but not sure right one
    Thanks,
    Moorthy

Maybe you are looking for