Service po close BY MASS MAINTENACE

hi,
i want to close service po.i know that it can be done by final entry sheet indicator in ml81n.
but for mass pos how i can set this indicator in MEMASSPO TCODE.
I WANT TO CLOSE SERVICE PO IN MASS SCALE.
PLS GUIDE ME HOW TO CLOSE THESE SERVICE PO BY MASS MAINTENANCE.
REGARDS
SUMIT BISLA
Edited by: Csaba Szommer on Nov 5, 2011 8:42 AM

Hi
check following link it will help you
[Short Close of Service Purchase Order;
[mass t.code service po close;
Regards
Kailas Ugale
Moderator message:
Warning. Reason: link farming.
Points will be unassigned.
Edited by: Csaba Szommer on Nov 5, 2011 8:38 AM

Similar Messages

  • Service PO close which is not delivered

    Service PO close which is not delivered, I want to close Service po made wrongly in this current year. it is not closing.

    Hi,
    you can set then EKPO-ELIKZ directly in the PO item: in transaction OMF4.
    For example:iIn order to make this field (EKPO-ELIKZ) editible, you need to change field status for it in field status group 'PT9F' in 'Define Screen Layout at Document Level' in SPRO for PO.  (The note 30316 can help you to get the relevant field status groups to check)
    Regards,
    Edit

  • Difference between service order/notification to the maintenace order/notif

    Hello friends,
    please explain the Difference between service order/notification to the maintenace order/notif and also to the Sales order.
    i have a idea on the above topics. iwnt to have a detailed explanation of the above topics.
    I know that service order/notification usually for external services.and maintenance O/notification for internal services .
    for every post with descent information, points willl be rewarded

    Dear raj kumar,
    1. Service order and Notification: These are used for Customer Services, i.e., these are used for  processing the customer complaints regarding the equipments technical problems installed at customer locations.
    In this scenario, we sell equipments to customer and also offers the services for that equipments on chargeable basis or free of cost as per sales terms and conditions.
    2. Maintenance order and Notification: These are used for Plants, i.e., for processing the complaints of the equipments which are installed within the plant.
    In this scenario, we buy the equipments from the vendors and carry out the maintenance ourselves.
    Hope this will be helpful
    Regards,
    Praveen.

  • Mass t.code service po close

    Hi
    I have 100 service purchase orders partialy service entry sheet also completed,now i do not want to create service entry sheet for that 100 service pos,now i want to close open sevice pos in mass t.code,how can i do in mass t.code,plz suggest.
    Regards
    Sam
    Edited by: sadaraji on Mar 21, 2011 11:37 AM

    Hi,
    1st check  Delivery completed indicator activated for service PO or not.
    Make "Delivery completed" indicator is "Opt.entry" in GR/IR control segment for Field Selection Key PT9F( OR your Field Selection Key you are using for Frame work order document type) in following path:
    SPRO-> MM--> Purchasing -> Purchase Order -> Define Screen Layout at Document Level
    Then you can use concept of using  MEMASSPO for closing service order.
    Regards,
    Biju K

  • URGENT- SERVICE ORDER CLOSING IN MASS MAINT...

    Dear Guru
    in our plant there are severat old service order which are pending to close
    there is no item code or service no. in order
    IS THERE ANY MASS MAINTAINANCE FOR SERVICE ORDER CLOSING.
    urgent required
    DEV...

    Dear
    for mass maint required a table name but we have no material code so how to get it pls define steps for the same.
    regds
    dev...

  • Service PO Closer

    Hi Everyone,
    I would like to close the partial open service PO for the balance services. How do i do it?
    Regards
    Nitin

    While crating the SES, if you are aware that this is going to be the last SES against this PO item , then during SES creation, you can set the "Final entry" flag.
    This will automatically set the Delivery complete flag. Also, you will not be able to create further SES against this PO item.
    But if you donot set the "Final entry flag" and then try to set the "delivery completed" indicator, then the system will close the PO, however, you can still create a SES against this PO.

  • Service PO close..!!!

    Hi ,
    We are creating Service PO / Service entry sheet/ GR/ MIRO.. There are many PO's whch is pending for complete service
    i.e , Service Line 1 - 5000 INR  , Service Line 2 - 10000 INR   etc.
    I made the service entry /GR/MIRO for 1st Line  ( 5000 INR)..At this stage i am aware that 2nd Service going to use (10000 INR)
    Now i want to close these PO'S where Service's not completed Fully.

    hi,
    Set the final entry sheet indicator in ML81N for that service PO
    { If the final entry sheet indicator (ESSR-FINAL) is set in an entry
    sheet, it is not possible to create further service entry sheets for the
    respective purchase order }
    Please check this post
    Service PO Closure
    for more about this indicator refer
    Service PO Delivery complete indicator
    and also refer this sap note 735404
    You will get the idea
    Edited by: redriver on Nov 28, 2011 3:32 PM

  • Date in service - AP to FA Mass addition

    Hi
    In R12, when we ran the AP to FA Mass addition and querying mass addition in FA, system is showing new assets with date in service as the date on which Mass addition was run. Is that the intended functionality..?
    Can we change the date in service as invoice date by default through mass addition program..?
    regards
    Ahsan

    Please check in KON* series table in SE16N transaction. I guess KOHN table may help you out. You can see other similar tables.
    In any one of the table you will find validity data.

  • Service Call Close

    Hi Experts,
         Can we close Service call in SAP 8.81 PL 7. I have closed the Service call through DI API(SDK). But its not reflecting the SAP , even though I have given resolution . Kindly help me on this.
    My code
    Dim Service As SAPbobsCOM.ServiceCalls
            Dim RetCode As Integer
            Service = objSBOAPI.oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oServiceCalls)
            If Service.GetByKey(CallId) = True Then
                Service.Resolution = "Closed this call"
                Service.Status = -1
                RetCode = Service.Update()
                If RetCode <> 0 Then
                    Application.SetStatusBarMessage(objSBOAPI.oCompany.GetLastErrorDescription)
                End If
            End If
    Regards
    Tomy

    Hi Tomy,
    Judging from this code, you are not closing the service call.
    The only thing you are doing is updating the Resolution and Status.
    Try this:
    RetCode = Service.Update()
    If RetCode = 0 Then
         'The update succeeded, now we can close the Service call
         RetCode = Service.Close()
         If RetCode <<> 0 Then
              Application.SetStatusBarMessage(objSBOAPI.oCompany.GetLastErrorDescription)
         End If
    Else
         Application.SetStatusBarMessage(objSBOAPI.oCompany.GetLastErrorDescription)
    End If

  • Service Station closes after starting after install of 3 Toshiba patches

    Hello there,
    there was recently a "patch day" in Toshiba Service station. I believe from my memory the patches came out earlier but I installed them on 23 april 2010. There were three patches and as far as I can reconstruct from the system recovery it were:
    - BIOS flashing
    - HDD/SSD Alert patch
    - HDD Recovery patch.
    So, besides that I had problems getting the BIOS flashing patch to run, eventually succeeded by extracting the installation files to a different location and run it with administrator rights.
    My problem is, that after this patch session, my Toshiba Service Station does not start up any longer. When I start my system, after logging on it seems to start up but then always closes again with the windows error report saying "stopped working" and that's it. I am not sure of which patch this could be. Also I believe that one of these patches said in the description that it will update Service Station itself?! I downloaded Service Station from the Toshiba Website but it will not turn out to the better, doesn't matter if I uninstall it before, start the installation with administrator rights or not.
    My system is Satellite A500, Windows 7 64bit.
    I hope you can help. Unless I cannot access updates any longer!
    Note: Some days before I installed a graphic's driver for my Nvidia GT 230m FROM THE NVIDIA WEB SITE. Why did I do so? I experienced literally HOURLY an unwanted system restart and as I can see from the problem report it was always due to the graphic's driver. In the following I installed the two patches from the Toshiba Website, the older and the newer but the problem persisted. Luckily at some day I recheched the Nvidia website and there was a new driver.
    Although it said BEFORE (not now any longer) that this graphic card should rely on a manufacturer driver, I nevertheless installed it because it coulnd't become worse. The positive thing is, that I had not a single system crash until now even if I leave the laptop switched on for hours.
    I am not quite sure if the problem with Service Station started right after this graphic driver installation, but it can't be because I installed the three patches mentioned above THROUGH Service station some days later.
    But it might have affected the software after these patches? I am not sure.

    Hi
    Simply said; Toshiba Service Station crashes and new installation of this tool didnt help.
    Right?
    Well, because you are not sure whats wrong and according to the posting, you have got some other problems related to the software, I recommend to recover the notebook using the HDD recovery option!
    This will set the notebook to factory settings.
    Of course you should backup the data if you have important files.
    Run HDD recover and after that check how the notebook would functions!

  • Service to close Year End POs

    Is there any special process or utilities or any transaction to close all the open purchase orders at the end of the year?
    Or do I need to handle this through a report?
    Please let me know your thoughts.
    Thanks
    Kiran

    Hi Rob,
    Currently there are numerous pld POs in our system which are inactive and should be closed.So our business thought of starting close them. Since the number is quite large, they thought of automating the process and continue that process towards every year end too(They will determine the period to call it as old or inactive period).
    So this is kind of cleaning up. Thats the bottom line.
    Beyond this, below is the technical resons given by functional team:
    1. During the fiscal year carry-forward process, some additional staff time and effort are needed to resolve issues that are caused by some of these old and inactive orders.
    2. Budgetary reporting is not accurate. Commitments appear that never will be released.
    3. Old funds that could be discontinued must be kept active if there is still a commitment against it.
    4. Eventually old inactive orders will need to be closed so they can be archived from the tables for system efficiency.
    Thanks
    Kiran

  • Mass Maintenace (MM17)

    We have added fields to MARC and these are not showing up on MM17 to be able to mass update.   We have in the past does this function with other added fields to MARC but the person that performed that process is no longer here, so I know that this can be done.   Does anyone know the proper steps to perform this function of allowing additional fields that are already on MARC to be changed using MM17.
    Thank you
    Khrista

    . In table MARC custom fields need to be add using append structure. For that need to create data elements & domain for corrosponding fields.
    2.In SE51 need to copy standard program SAPLMGD1 & screen 2481( In your case screen would be different ) in to Z program.     
    3.Now in to the layout of Z program need to add custom fieldu2019s which we defined using append structure in MARC table.
    4.Need to add Field statment for the new custom fieldu2019s into the PAI Flow logic of Z program inside CHAIN...ENDCHAIN statement.
    5.Need to run transaction OMT3B and then copy screen sequence no. 21 into our Z screen sequence say Z1.
    6.Once screen sequence is copied into screen sequence Z1. select sequence Z1 and double click on data screen folder.Select screen sequence with description MRP1 and after selecting it double click on Folder 'Subscreen ' and change the program given for screen no 2481 with our Z program name and Save.
    Imp Note - Refer SAP Note no. 44410.

  • Customer mass maintenace

    Hi Gurus,
    This is regarding customer mass maintenance XD99 transaction. When I try to remove the central account deletion flag (KNA1-LOEVM) and central account deletion block (KNA1- NODEL)for some accounts (customer).
    I have received the following error u201CDuplicated Cust ID partner u201C    u201Cexists for locatu2019n assigned. Check your entryu201D
    So what my understanding is in order to remove the account deletion flag and accouhnt deletion block from those account do I need to remove the locations first ? if that so then locations means Location No. 1 (KNA1-BBBNR) & Location no. 2 (KNA1-BBSNR)
    Kindly advice
    Thanks,
    Santhosh

    Dear Santhosh
    This is a reference assigned in germany.  If you dont need it keep it blank
    Best regards
    dsrdsr

  • To close Mass Service order

    Hi Team
    How i can close the Mass Service orders.
    please advice.
    Br, Kiran Unde

    Hello  Kiran,
    After settling the cost, you can do the mass CLSD of Orders through IW72  the following way.

  • Mass deletion of Service Entry Sheets

    Dear all,
    Is there any option to revoke the acceptance of multiple service entry sheets and mass deletion.
    thanks in advance
    urendra

    Dear Mohamed,
    I want an option for revoking acceptance and deletion for multiple service entry sheets at a time,
    regards,
    urendra

Maybe you are looking for