Service PO close which is not delivered

Service PO close which is not delivered, I want to close Service po made wrongly in this current year. it is not closing.

Hi,
you can set then EKPO-ELIKZ directly in the PO item: in transaction OMF4.
For example:iIn order to make this field (EKPO-ELIKZ) editible, you need to change field status for it in field status group 'PT9F' in 'Define Screen Layout at Document Level' in SPRO for PO. (The note 30316 can help you to get the relevant field status groups to check)
Regards,
Edit

Similar Messages

I bought an I PAD app worth $9.99 which does not deliver content as promised. How do i claim refund ?

This app shown as VIDEO which promised to show 4000+ hollywood movies, is asking me to buy more app to show movies and wont work as expected. How do i claim refund ? I am unable to see any contact details of the app developer.
Kindly help.
Regards,
Gautam Thakkar

That happened to me when i had tower town... I spent $5.99 and the "bucks" did not pop up.
What you have to do is exit the app. Then start up the app again.
If the in app purchase still has not popped up, I would restart the ipod.
If the in-app purchase still has not appeared in the app, I would contact whATever company made the app and ask for your money back...

How to track the emails not delivered in SAP

Hi Guys
i am using SOST to track the emails which are not delivered
but
SOST is not tracking all the un-delivered emails
It is tracking only those mails as error whose mail IDS are not registered in SCOT
when i regester some un-existing mail ID in scot and send a mail to that via sap
SOST is showing its status as sent/transmitted/delivered
My requirement is to track akk the undelivered mails that are sent via SAP
Please advice
Edited by: kittu reddy on Feb 18, 2008 8:19 AM

Hi Kittu,
Normally that it what we expect from the system point of view
i don't think there should be a program or other functionality to check whether you have entered a correct mail id or not.
Regards,
Vamshi.

Re: Subscription not delivered

I bought a subscription for India which was not delivered till now. I bought it 2 hours back. Please help me. payment has been posted and accepted.

Hello and welcome to the Skype Community.
Your account shows that you have used your full minutes allocation in your current billing cycle and your next minutes will be added to your account when your next billing cycle starts on June 17th 2015.
Renewing your monthly Subscription before your billing cycle ends has no effect on the date upon which your minutes allocation will be added to your account.
To continue calling until your next minutes allocation is applied to your account please purchase either a Subscription but with a different amount of minutes or Skype Credit.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my Mac computer and still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help?

I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my iMac computer and it still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help? There are 12,733 songs, a few dozen of which are not going to be in the Apple music library because they are unique to my collection. Also, some titled "Track XX" and no artist. I assume these would either not upload or else just be uploaded. But, after an overnight of step 2, the iTunes match program was still on song number 7384 or 12733 (it was on that number for over 12 hours). Looking in the music library, activating the iCloud icon and status fields, there were hundreds of songs with the status "waiting."

Lmwilliamson wrote:
Kernel panics:
After taking my late 2009 15 inch macbook pro to the apple store, the genius completely erased my computer and reinstalled the Mac OS X software, but the problem still persists.
I also took it to my college tech support center, they tried to take the ram out and reinsert it and clean up the dust, but the problem still remains.
I am able to use my computer in Safeboot mode (only)
Well it could still be a software problem if you installed a third party program after the OS X wipe and install, because by booting into Safe Mode it disables certain functions of OS X and hardware. Check for updates or problems for all your third party software, include everything, including menulets, System Preference panes, hacks and so forth.
If you restored any sort of software from backup like TimeMachine, it likely was corrupted data and now is returned.
If the college tech support found a lot of dust clogging the rear exhaust vents behind the fans, then likely the heat damage done to the machine has already occured and can't be reversed. Video cards are usually first to go, which Safe Mode does disable the video card somewhat.
Run through this list of fixes, it's systematic in nature, also has a Hardware Test to see what's going on
..Step by Step to fix your Mac
Too bad this is occurring to a mere 4 year old machine, but dust will do that. Here is the culprit that Apple doesn't tell anyone about.

I cancelled my service, was charged for service which was not provided, and I am unable to find a way to dispute or to pay my bill.

To begin, what ADA-compliant options are available to work with a service representative? I've never found the online chat service support to be available during my waking hours after checking over the last week. I can't find a contact email for support, either. I've been instructed on several occasions that I will need to make a voice call for customer service, but unfortunately, this will not be possible. I will require text-format assistance from customer support to address two issues which I am unable to solve on my own:
1) I was charged for service following the cancellation of my service; this includes a period following cancellation during which no service was provided. After working with a representative in person, I was told that my final bill would be adjusted to reflect the legally billable amount. This was three weeks ago and I haven't received a response, and I haven't been able to find a way to pursue a resolution - What can I do to help move this process forward?
2) It appears I will be unable to pay my bill after this dispute has been reviewed. My phone number is no longer with Verizon. The online bill payment login requires a phone number - I have never been provided with any other account number. Unfortunately, Verizon appears to close access to online bill payment when the phone number is transferred, even to accounts with unpaid invoice amounts. How can I pay my bill online?

kananga wrote:
To begin, what ADA-compliant options are available to work with a service representative? Good question, and one that I don't know the answer to. Does anything on this page help? Products & Services Overview | Verizon Wireless
1) I was charged for service following the cancellation of my service; this includes a period following cancellation during which no service was provided. Service is normally billed through the end of the billing cycle, whether service is provided or not. "Cancellations will become effective on the last day of that month’s billing cycle, and you are responsible for all charges incurred until then." After working with a representative in person, I was told that my final bill would be adjusted to reflect the legally billable amount. According to their legal docs, the "leagally billable amount" is through the end of the billing cycle. This was three weeks ago and I haven't received a response, and I haven't been able to find a way to pursue a resolution - What can I do to help move this process forward?
2) It appears I will be unable to pay my bill after this dispute has been reviewed. My phone number is no longer with Verizon. The online bill payment login requires a phone number - I have never been provided with any other account number. Unfortunately, Verizon appears to close access to online bill payment when the phone number is transferred, even to accounts with unpaid invoice amounts. How can I pay my bill online? You cannot pay online once the account is cancelled. You will be mailed a paper copy of the final bill, and you can mail a check, or possibly call in and pay over the phone. But online is no longer an option once the account is cancelled.

SD report on sales which have been delivered but not yet billed

Dear all,
Do we have any SAP SD standard report showing a total of the value (preferably by sales office) of sales which have been delivered but not yet billed.
Client has a legacy system which shows report showed up goods which have been PGI'd/delivered but not invoiced - this is exactly what what is required in SAP report.
Thank you in advance,
Sastry

Sastry,
I have used this report "Sales office Analysis- Invoiced Sales - MC-E"
I found something on this forum i.e
VL06F - general delivery list / List of outbound deliveries,
VL06T - outbound deliveries for transportation planning
I dont know if it is useful in any way.
Sridhar.

A device which is not part of this management group has attempted to access this Health Service.

Has anyone found an answer to this yet? I have uninstalled/reinstalled the agents both manually and through the push. Rebooted the client, rebooted the sce server. Forced the group policy to reapply, forced the health agent to /reportnow and I still get the error. The client shows up under the agent managed section but under the health state column it shows not monitored. The clients can ping the SCE server by FQDN and RDP to it as well so name resolution is working fine.
On the the SCE server I get this in the log
Event Type: Information
Event Source: OpsMgr Connector
Event Category: None
Event ID: 20000
Date:  6/25/2009
Time:  10:09:40 AM
User:  N/A
Computer: *******
Description:
A device which is not part of this management group has attempted to access this Health Service.
Requesting Device Name : *****
And this
Event Type:            Information
Event Source:           OpsMgr Connector
Event Category:       None
Event ID: 21042
Date:                        6/25/2009
Time:                       10:25:14 AM
User:                        N/A
Computer:                ***********
Description:
Operations Manager has discarded 1 items in management group Servername_MG, which came from $$ROOT$$. These items have been discarded because no valid route exists at this time. This can happen when new devices are added to the topology but the complete topology has not been distributed yet. The discarded items will be regenerated.
On the client I get
Event Type: Error
Event Source: OpsMgr Connector
Event Category: None
Event ID: 20070
Date:  06/25/2009
Time:  10:06:13 AM
User:  N/A
Computer: ******
Description:
The OpsMgr Connector connected to ****** but the connection was closed immediately after authentication occured. The most likely cause of this error is that the agent is not authorized to communicate with the server, or the server has not received configuration. Check the event log on the server for the presence of 20000 events, indicating that agents which are not approved are attempting to connect.
And this as well
Event Type:            Error
Event Source:           OpsMgr Connector
Event Category:       None
Event ID: 21016
Date:                        06/25/2009
Time:                       10:06:18 AM
User:                        N/A
Computer:                ******
Description:
OpsMgr was unable to set up a communications channel to **** and there are no failover hosts. Communication will resume when ******* is both available and allows communication from this computer.
And this
OpsMgr has no configuration for management group Servername_MG and is requesting new configuration from the Configuration Service.

Hey Nathan,
Yea I have sent the script to eveyone that has aked for it. I dont know if its helped anybody else as none has given me any feedback either way.
I guess I can post it here for everyone to use.
Please keep in mind that if you use this script from MS its at your own risk, If your DB blows up, massive catastrophic failure ensues and so forth ITS YOUR OWN FAULT. MAKE SURE YOU HAVE GOOD BACKUPS
Step 1) Run this against your SCE 2007 DB
DECLARE @BaseManagedEntityInternalId int
DECLARE @BaseManagedEntityId uniqueidentifier
DECLARE @ViewName sysname
DECLARE @Statement nvarchar(max)
SET @BaseManagedEntityInternalId = 0
WHILE EXISTS (SELECT * FROM BaseManagedEntity WHERE (BaseManagedEntityInternalId >
@BaseManagedEntityInternalId))
BEGIN
SELECT TOP 1
@BaseManagedEntityInternalId = bme.BaseManagedEntityInternalId
,@BaseManagedEntityId = bme.BaseManagedEntityId
,@ViewName = met.ManagedTypeViewName
FROM BaseManagedEntity bme
JOIN ManagedType met ON (bme.BaseManagedTypeId = met.ManagedTypeId)
WHERE (bme.BaseManagedEntityInternalId > @BaseManagedEntityInternalId)
AND (bme.IsDeleted = 0)
ORDER BY BaseManagedEntityInternalId
SELECT @Statement = 'IF NOT EXISTS (SELECT * FROM ' + QUOTENAME(@ViewName) + '
WHERE BaseManagedEntityId = ''' + CAST(@BaseManagedEntityId AS varchar(50)) + ''')
PRINT ''' + CAST(@BaseManagedEntityId AS varchar(50)) + ' ' + @ViewName + ''''
EXECUTE(@Statement)
END
STEP 2)
If your problem was the same a mine you should get some GUID’s returned. (For example 93790c0B-09C4-3A4D-CE72-F4E3Dd917D78 MTV_DeploymentSettings)
Using the GUID that we got in the output file
Execute the below given query:
==========================
select fullname
from basemanagedentity
where basemanagedentityid = ‘<GUID>’
==========================
Verify that the device or the object mentioned in the above output is not displayed in Operations console.
Only in case if the object is not displayed then use the below given query to delete it from database.
==========================
update basemanagedentity
set isdeleted = 1
where basemanagedentityid = ‘<GUID>’
==========================
Before executing the above query please ensure that you have the backup of the database. Also note that you need to run the above said query only incase if you do not see the object in the Operations console.
After executing this query, run this stored procedure:
==========================
exec p_Detectandfixinstancespaceinconsistencies
==========================
Once it is done:
> Stop all the three OpsMgr services: health, Config and SDK on Management Server
> Cleared the health service state folder.
> Start all the three OpsMgr services: SDK, Config, and health on Management Server.
> Wait for 30 minutes and see if the agents start getting monitored.
I hope this helps everyone

I connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone.

i connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone. what should i do.?

First, you do not have a 3G if you could upgrade it to 6.1.3, because 4.2.1 is the last version that will work on the 3G. So you either have a 3GS or you somehow hacked the phone to install an incompatible version. You can check the model you have by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
Assuming you have a 3GS the most likely reason for your problem is you have a gray market phone that was hacked or jailbroken to unlock it. When you upgraded it you removed the hack, so the phone is now locked to its original carrier.

Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.

I am trying to connect to SharePoint in my Office 365 environment by following https://support.office.com/article/Set-up-the-SharePoint-Online-Management-Shell-environment-7b931221-63e2-45cc-9ebc-30e042f17e2c and I am getting:
Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.
Is there some setting I need to change on the O365 side? Thanks.

Hi,
Based on your description, my understanding is that you want connect SharePoint Online using PowerShell.
Please make sure that the following software is installed.
Windows Management Framework 3.0
SharePoint Online Management Shell
And then, open the SharePoint Online Management Shell and use the Script below to test
whether it works.
$User = "[username]@[tenant].onmicrosoft.com"
$Pass = "[password]"
$creds = New-Object System.Management.Automation.PSCredential($User,(ConvertTo-SecureString $Pass -AsPlainText -Force));
Connect-SPOService -Url https://[tenant]-admin.sharepoint.com -Credential $creds
Get-SPOSite
More information:
http://blog.falchionconsulting.com/index.php/2013/01/using-powershell-to-manage-sharepoint-2013-online/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

When I close firefox, it will not allow me reopen it unless I CTRL-ALT-DLT and force it to actually close, which at this point it is using up an average of 300,000k-450,000k. also, almost none of the links I click, open. i have to open it in a new tab.

when I close firefox, it will not allow me reopen it unless I CTRL-ALT-DLT and force it to actually close, which at this point it is using up an average of 300,000k-450,000k. also, almost none of the links I click, open. i have to right click and open in new tab.

Please check [[safe mode]], [[troubleshooting extensions and themes]].

Can universe connect to restful web service which is not soap based

Can universe connect to restful webservice? I know it is allowed to connect to SOAP webservice. Currently is using WSDL1.1.
How about restful web service which does not have any wsdl file?

Hi,
there is a chapter - Security Configuration at Message Level
in XI config guide which specifies everything you need - this is what you need
so I hope no further explanations are necessary
Regards,
Michal Krawczyk

HT4995 i lost my iphone 4 last night and its not reachable assuming someone took out the sim.. so can i or my network company track the iphone which is not reachable through assuming location services and find my phone apps are enabled?

i lost my iphone 4 last night and its not reachable assuming someone took out the sim.. so can i or my network company track the iphone which is not reachable through assuming location services and find my phone apps are enabled?

No. Find My Phone is the only way to locate any lost iPhone. However, this requires that Find My Phone be turned on/activated before the phone was lost, and the phone must have an Internet connection. If your phone is turned off, does not have an Internet connection, or has been restored, there is no way to locate it.

Hi no none of my other data services are working normally and when I try to send my picture messages it says not delivered and tells me it's unable to send.

Hi no none of my other data services are working normally and when I try to send my picture messages it says not delivered and tells me it's unable to send.

Hello Joe,
I found a few resources you can use to troubleshoot the iMessage issues you are experiencing.
I recommend reviewing this article first:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
If your Apple ID is activated in the Messages Settings and you still cannot send and receive iMessages, I recommend following the steps in the section titled "If you still can't send or receive iMessages" in the following article:
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Thank you for using Apple Support Communities.
Best,
Sheila M.

App testing phase: Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered

We are testing an app at work and Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered to these tow devices.
PUSH notification were delivered to some of the other iOS devices: (iPhone5 / iOS 6.1.4 and iPhone5 / iOS 7.0.3)

Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host>

Service PO close which is not delivered

Similar Messages

Maybe you are looking for