Service PO Line Items u2013 EXT_LINE Replication values

Hi,
We have run into a new production problem replicating service po changes to our ECC 6.0 backend system from our SRM 5.0 EC system.
Weu2019ve reported the problem to OSS but weu2019re not able to come to an understanding.
When we add a new service item line to an existing service po in SRM, the existing ERP po is not updated correctly. The LINE value for the new/added service item in the ERP PO seems to be the same as the SRM PO service line item value instead of the next sequential base 10 number.
The original service LINE values in the ERP PO are assigned as per our ERP config which is increments of 10 (ie. With 2 service lines, 10, 20, u2026)
If a new service item is added to a PO that already has 2 service item lines, the new item is assigned the number 3. When replicated to ERP, the new service item is added as 3 to the existing 10 and 20 items.
Is there config in SRM to set the EXT_LINE values in increments of 10 instead of 1 as it currently appears to be replicated to ERP so it matches the ERP config? Or is this an error in either ERP or SRM?
Thanks,
Jerry

SAP is providing an OSS note to correct the problem.

Similar Messages

How to not to display any line items for val flds values are zero in KE30?

Dear All,
In KE30,in one of my reports, i do not want to display such line items for which all values are zero for all val flds, it should only display the line items for which there is any value, i have tried Zeros hide in KE35 in formatting menu>other format>hide zeros, but unofrtunately it didnt came out.
Regards
Rashid
Edited by: rashinuet on Feb 20, 2012 4:38 PM

Dear Abhishek,
I have tried that as well in ke35 and made this option activated on my val flds like sales revenue for hide zero values, but it didnt came out as well, then in i tried ke32 change report >Extras menu>form settings, this adopts all the settings in the report from the form you have assigned, but this is not working, i am failed to understand what has gone wrong.
Regards

Dates getting wiped from Service Plan line item

Hi All,
We are currently facing an issue in the dates management on the service contracts. When we create a service contract and without saving if we change start date at the header we come across the following issues
1) Date rule gets wipes out from the service contract items.
2) All the dates maintained at the service plan line item are empty.
Contract header and Contract item has the same custom date profile .
For the service plan line item its a standard date profile SRVPLAN.
It will be helpful in getting some pointers towards the issue or if someone has faced similar problem before.
Regards
Sohit

Hello Moises,
Can you give some details on how you managed to get this solved?
Thx
Nicolas

Standard Service Process-Line item for TECO not creating

Hi,
In the standard repair order process,upon TECO of service order,one line item will get generated in repair order and based on that outbound delivery will be done.In mycase after TECO of service order,line item is not automatically getting created.What could be the reason?
Regards
SB

Hi
I dont think how much this will be helpful
Check ur repair procedure
Sales
Sales Documents
Customer Service
Returns and Repairs Processing
Returns and Repairs Processing
Check it out...
- Pithan

Multiple line items one with default values

Hi All
We have a flat file coming into xi that needs to be mapped to an idoc, the idoc will have multiple line items.
The first line item must have default values but the from the second line item and on must have dynamic value from file? How Can this be achieved?
Regards

Hi,
I didnt get the the exact prb you have been facing...
But from my understabding,
Try giving constants for the default values of first Line Item.
Then, directly map the file data to the second line items onwards..
Regards,
Swetha,

Issue in using custom discount condition type in pricing agreement at Service Contract line item level

Hello
We are facing an issue while using a Z discount condition type in price agreement at service contract line item level.
A Z Condition type has been created in ECC and assigned to the pricing procedure. This pricing procedure is downloaded in CRM and determined in the service contract.
A condition maintenance group using this Z condition type is created in CRM and assigned to service contract item category.
Condition records are created in CRM for this condition type/condition maintenance group for specific products along with sales org and discount percentage.
But when the price agreement(using this condition type) is used at the item level of a service contract, the system throws errors (related to product/unit of measure and sales org, even though no issues seem to be there)and thus the price agreement is not allowed to be used.
If anyone has worked on such kind of scenario, please get in touch, I will share more details for the same.
Regards
Ankit Arora

Dear Ankit,
Once the pricing procedure is downloaded, please maintain the document pricing procedure at service contract header level, and maintain the customer pricing procedure at business partner sales area billing data.
In spro, maintain the pricing procedure for the combination of sales area, document pricing procedure, customer pricing procedure.
Please crosscheck whether the condition table is active or not.
Regards,
Maddy

Problem in adding vales to service contract line item

I want the OBJECT ID field to be filled in OBJECT LIST tab at item level when ever a service product is entered in service contract ( new line item) automatically ...
I tired wiht CRM_ORDERADM_I_MERGE (CRM_ORDERADM_I_BADI) and
CRM_ORDERADM_I_MERGE(ZCRM_ORDERADM_I_BADI) methods and using fuction module
CRM_ORDPRP_I_MAINTAIN_OW but not success yet.
any help !!
Thanks ....
Edited by: aday rao on Sep 15, 2008 3:08 PM

The way I typically handle organizational service attributes is to have a single amadmin XML file per AM service and in that amadmin file I have two requests, one to assign the service and the second to modify the service attributes. I then run the amadmin command with the -c continue option on the amadmin XML file so the service is always modified with latest settings regardless of whether or not it was assigned for the first time.
Since your question relates to service attribute modification investigate the SchemaRequests -> AddAttributeSchema amadmin commands. For example, I use the following files to modify the amUserService
<Requests>

<SchemaRequests serviceName="iPlanetAMUserService" SchemaType="User">

<AddAttributeSchema fileName="/opt/SUNWam/custom/amUserAttributes.xml" />
</SchemaRequests>
</Requests>
<Requests>

<AttributeSchema name="somenewattribute"
type="single"
syntax="string"
any="display"
i18nKey="u301">
</AttributeSchema>
</Requests>

Deleted Service PO line items are appering in ME28

Dear SAP Experts,
I have created one service po with 2 line items. One line item has plant 'X' and that line item has been deleted by me, in second line item has different plant 'Y' . While releasing the PO using ME28 transaction deleted po lintem also appearing in that?
Kindly suggest what will be the reason for that?
Thanks & Regatrds,
Amruth.

Hi
For purchase order release strategy is triggered at Header level i.e for total document not for individual line items.
When you try to release at ME28 also it will release total document and I could not able note where you are getting line numbers in ME28.
Please let me know if you have any further query.

Additional Service tax line items at the time of payment

Hi friends,
Please look into the following requirement:
At the time of vendor invoice, following entry is passed:
Dr. Expenses                                             3000
Dr. Service Tax (ST) not accrued Due             100
Dr. Ed. Cess on ST Not accried Due                20
Dr. SHE Cess on ST Not accrued Due             10
Cr. Supplier                                          3130
In the normal course, at the time of payment the following entries are generated:
Dr. Suppliera/c.    3130
Cr. Bank a/c.                 3130
My requirement is: at the time of payment, the service tax components debit entries should be nullified by credit entries and these three items should be debited to new accounts and the entries should be:
=========================
Dr. Suppliera/c.                            3130
Dr. Service Tax (ST) 'accrued Due' 100
Dr. Ed. Cess on ST 'accrued Due'      20
Dr. SHE Cess on ST 'accrued Due'   10
Cr. Service Tax (ST) Not accrued Due 100
Cr. Ed. Cess on ST Not accried Due     20
Cr. SHE Cess on ST Not accrued Due   10
Cr. Bank a/c.                                      3130
==========================
The purpose of the above is to carry forward only the tax applicable to the due account at the time of paying the vendor.
These additionally created three items as 'accrued due' should be taken for adjustment against the output tax liability at the time of making the payment of tax to the Government.
I am not sure whether this is what being following as a general practice.
If this is not so, I look forward your remarks on the procedure to be followed or updation of any SAP Notes.
Full points will be awarded for eligible answers.
Regards,

Yes yar. I know the concept of special GL. But I fail to understand how that would be applied in the case.
My requirement is in another terms:
At the time of posting vendor invoice, the ST line items are created and is taken for input credit.
But I dont want that to be taken for credit at that time. Only at the time of payment to the vendor, the same should be credited to my 'due' account. So the line items generated at the time of invoice posting should be nullified with equal credit entries and additional credit entries for availing credit should be generated at the time of payment. This process should happen in the case of output service tax also.
The processes should generate those additional nullifying and crediting 'due' accounts manually when you select the outstanding invoice and click on it for processing.
Am I more clear to you now ? Please offer your comments. Is there any SAP Notes for coping the situation.
Regards

Default deselected GR indicator in service PO line item

Is there a way to have the Goods Receipt indicator default to unchecked/deselected for Service line items on the PO (Item Category D)? Thanks for your responses.

Thank you for the link. I did attempt to maintain T163 via SM30. I had to first Find Maintainance Dialog and selected V_T163Y. It defaults to Display mode, and it only allows Change mode on the first Item Categories: Overview screen. When I go to the detail screen for 9/D/Service and switch from Display to Change, it kicks me back out to the Overview screen. Is this an authorization issue with my ID? Otherwise, I am not sure how I would change those settings for the item category. Thanks again for the help.

Table of Service PR line item quantity

Hello Expert,
I want to know the table in which the quantities are stored for Service PR. Line item service quantity table where we enter service no and quantities.
Regards,
Shyam

Hi,
I checked in table EBAn and ESLL but the service number (activity number) and service quantities are not available in this table.
regards,
shyam

Partial cancellation of service entry line items (ML81N)

Hi Sap Gurus,
Suppose 5 service lines in a PO, Passed service enrty sheet for all 5 services, done LIV for only 4 services. i wan cancel 1 service line which is passed already.
Thanks in advance,
Vinod

Hi,
If all 5 services line item are include in single service entry sheet document, then you can't delete single service line item.
But your service entry sheet documents are different for all service line item then you can delete any one service entry sheet with ML81N.
Note: - Invoice documents is not generated against your service entry sheet documents.
Regards,
Mahesh Wagh

Printout of Changed PO Line items with Quantity and value

Hi SAP Gurus,
I want to have the printout of only those PO Line items with the change in Quantity and Value....
How can i achieve this...
Any config./ Developement...
Plz. suggest....
Rgds,
Navin

Hi,
In config Purchasing->Messages->Output Control->Message Determination Schemas->Define Message Schema for PO, under 'Assign Schema to Purchase Order', if the 3rd indicator from the right 'New message determination process for change messages' is NOT selected, only changes are printed in the changed PO's.
Are you using standard print program and SAPScript?
Also under config Messages->Message Type->Define Message Type for PO->Fine-Tuned Control: Purchase Order, make sure you have operation '2' for PO output type.
Phyllis.
Edited by: Phyllis Waugh on Oct 10, 2008 6:40 AM

Updating service contract line item's end date

Hi,
I am trying to extend the end date on a line item in a service contract via the DI and it is giving me the following error: 'Item's end date cannot be greater than contract's end date' and I don't understand why.
I retrieve the service contract object, change the header end date then find the line item I need, update it with the same end date and then issue call the SC update method. Here's my code:
    Try
             SC.Lines.SetCurrentLine(SerialNbrLineNumber)
             NewStartDate = LineEndDate
             'calculate new end date & extend service contract
             NewEndDate = NewStartDate.AddYears(Warranty_Duration)
            'never make the contract end date earlier than it had been
            SC.EndDate = IIf(NewEndDate > SC.EndDate, _
                                                         NewEndDate, _
                                                         SC.EndDate)
            'update service contract detail with new end date
             If NewEndDate > LineEndDate Then
                 SC.Lines.EndDate = NewEndDate
             End If
             If SC.Update() <> 0 Then
                rs.RtnCode = -1
                rs.RtnMessage = B1Comp.GetLastErrorDescription()
             End If
I did see something in the di help that mentions that B1 calcs an end date based on the "duration of coverage" field but I don't think I could use that because I might only change the end date for one line item.
BTW I can do this in the application with no problem.
Thanks in advance for any assistance.

Known B1 bug. Should have checked support first. More info on note # 1026540

Service tax line item not coming at the time of Cash receipts.

Hi Gurus
I have an issue, when i received payment from customer than no line is generated for service tax reversal which i have captured at the time of billing, but it is happining through T code F-28.
any one have some idea of it, please share with me.
Regards
Shiv

From which T code you are posting customer receipt???

Service PO Line Items u2013 EXT_LINE Replication values

Similar Messages

Maybe you are looking for