Service PO not picking Schema MS0000

Hi Experts
While creating Service PO with Service Master (no condition master) , PO not picking service schema  MS0000 (PRS).  It is picking default Schema for Material RM1000 (maintained in Determine Calculation Schema for Standard Purchase Orders).
Please tell how to get service schema (PRS) in service PO
Sabya

Hi,
Assign Schema Group Purchasing Organization, Schema Group Of Vendor for service  and Calculation Schema for service MS0000 (PRS) in following path:
SPRO->MM->Purchasing->Conditions->Define Price determination process ->Define schema determination->Determine calculation schema for standard purchase orders.
Also assign Schema Group Of Vendor in the service  vendor master in purchasing data screen in XK02 t.code & save.
Now create service PO, you will have service schema.
Regards,
Biju K

Similar Messages

  • Customer service will not pick up

    I am a patient individual but totally fustrated at the fact that I cannot speak to live representative. I waited 24 minutes with nothing. Then called in new customer line and they picked up within 30 seconds and I am talking to a live representative. Verizon is shameless in how it treats it customers no wonder they push the 2 year contract. Shameless.

    Are you talking about after a transfer from the original number (1-800-VERIZON).  I have never waited more than 30 seconds for the initial pickup, and only once for more than a few minutes for a live person.  Transfers sometimes are done to areas that are not manned 24-7, which leaves you with no one answering. 

  • Regarding pricing not picking from contract while creating service entry

    hello,
    we are facing a problem -we have created a contract with a service item and made a purchase order with the same reference as well. problem starts while creating service entry sheet while adopting the services its not picking the rate from the contract. please guide us how to proceed further.
    thanks,
    ritesh

    Hi Ritesh,
    please check the pricing date in the contract service item and also in the entry sheet header. The price could be probably not found due to different validity of the pricing condition in contract - the price from the contract is not valid on pricing date of   the service entry sheet.                                                                               
    The price in SES is determined on the base of the value in the                        
    field 'Price Reference Date of Entry Sheet' (ESSR-LBLDT). This field                  
    is located on 'Basic data' tab.                                                                               
    However, enhancement SRVESSR (customer exit EXIT_SAPLMLSR_010) can                    
    be used for changing this behaviour.    
    Regards,
    Edit

  • JMS Adapter is not picking messages from Topic ( AIA Error Notification)

    Hi All,
    One of my service is not picking messages from topic. This service was working in one environment but not working in this environment.
    I am using AIA 2.5 and using AIAErrorNotification.
    Service AIAAsyncErrorHandlingBPELProcess is enquing the message but consumer service AIAReadJMSNotificationProcess is not being invoked automatically.
    Whenever we are manually invoking this service, then this service is dequing messages from topic.
    Is any have any clue for this?
    Thanks in Advance.
    Edited by: vikky123 on Dec 22, 2010 1:46 PM

    Increase Log level for cube.activation to debug and check the logs by stopping & starting the activation agent(I mean Retire and activate the process) .. It should give a clue on what's happening..

  • Conference calling codes not picked up

    I am using a 800 # conference calling service which worked fine on my Droid Thunderbolt.  Just upgraded to Samsung Gal III.  Now I get in to the service using the 800 number, but the conf calling service does not pick up the conference ID 10 digits and #, just says I dialled an incorrect conference ID number.  It jumps to this message even before I complete the code sometimes.
    Any setting to enable secondary numbers after connecting to a call?
    Thanks.

        Hello Armynova,
    Thank you for reaching out about this issue. Conference calls are super important in the business world and rest assured that we are dedicated to getting this resolved for you. May I ask what software version do you have on the Galaxy S III? Also, when you press the number key to enter the conference ID, do you hear the DTMF tone? If not then please advise so we can partner together and implement a solution for you.
    Thank you…
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • Service PO is not picking the condition type defined for services

    Hi Friends,
    I am trying to create a PO for services.. but in conditions tab..the system is picking standard PO pricing procedure. It is not picking the service Pricing procedure MS0000. request your help in understanding the issue.
    Also the PO is picking the Standard PO release strategy, but not the release startegy define for service..
    thank you.
    Kireeti

    Hi Kireeti,
    Your condition schemes for services probably have been modified. Please check
    schemes MS0000 and MS0001 in your customizing. For a correct price
    determination it is important that for example condition type PRS
    is in the first position, further the settings for the flag
    'Condition determined manually' should'nt be altered.
    Actually the standard schema looks like:
    4 0 PRS Total Price                       X 5
    5 1 PRS0 General Price Compon             X
    5 3 PRS1 Percentage of Wage               X
    5 5 PRS2 Overheads                        X
    5 7 PRS3 Misc Price Component             X
    13 0 KR01 Header Discount                 X
    14 0 KZ01 Header Surcharge                X
    Could you please change your schema and retest?.
    Best Regards,
    Arminda Jack

  • Schema ID and Category ID is not picked in case routing

    Dear Experts,
    Currently I am working on SAP CRM 7.0 SP06. Now I am trying to do the settings for case routing based on rule policy.
    I have done the following settings for the above requirement.
    I have defined application area (as Case Management) in multilevel categorization.
    I have created category schema in web ui with application id as case management.
    I have created rule modular as if case category is xxx then route to xxx Org unit.
    I have maintained this rule policy under service manager profile.
    Now the problem is when I hit escalate button schema id and category id is not picking so my rule is getting failed.
    Could you please advice if I missed any settings and also please share if you have some document which will explain steps to get the above functionality.
    And also please let me know where we assign Reference category ID to a case.
    Kindly share your views over the same.
    Thank you.
    Regards,
    Babu.

    ok

  • External Service Mangement Service Pricing Procedure not picking up in PO

    Hi ,
    We have an issue with External Services pricing procedure:
    In SPRO->MM->External services Management->Maintain Conditions for Service
    Have defined and assigned Schema for Services , but when I make a PO entry the pricing procedure is not picked.
    I have maintined condition types , and defined schema procedure for services and there after have assigned service pricing procedure to document type for PO.
    I get a message 'Conditions for service price determination incomplete'. And the conditions which are populated are from  a different pricing procedure.
    Please help me sort the issue.
    Thanks

    Hi,
    This error triggers in case of own pricing procedure or changes to standard pricing procedure. Other reasons could be the price calculation schema is not set up for External Services Management or calculation schema not adopted from client 0 when system configured. Please refer  following  notes. Thanking you.
    SAP Note No. 25357 MM-SRV: Error in the case of service conditions
    SAP Note No. 27024 MM-SRV: Setting up components (services)

  • HT1430 while travelling i had my ipone on airplane mode then after powering down for landing turn phone back on and now will not pick up service and wifi connections  what do i do to restart my phone

    my phone wil not pick up service or wifi.  while travellingI put it on airplane mode  then for landing i shut ff my phone.  after \i turned on phone  shut off airplane mode it ill search for signal but keepssaying no service.  the ohr travellers  am with all have ful servce with their i phones
    Help please

    how do i reset ths phne

  • Service Tax condition not picking during MIRO

    Hi,
    Referring earlier posted thread,
    http://forums.sdn.sap.com/thread.jspa?threadID=2135441&tstart=0
    I want to know insert a Tax Code - VAT for 10% and a Condition Type - Service Tax for 10.3%...
    During MIRO, Service Tax Amount is not Picking... Why???
    There is any solution for it.....

    Hi,
    If we create Service condition type, then why need to create Tax code in FTXP and maintain in FV11...
    Why both things need to create...??
    No need to maintain
    check for your service tax condition type
    Cond. class   A Discount or
    Calculat.type A percentage
    Cond.category B Delivery co
    and you have accrual tick for your condition in t-code M/06
    also check in your pricing procedure you have assign account key and accrual key for your condition type in t-code
    M/08
    Regards
    Kailas Ugale

  • Service entry Sheet does not pick any Condition charges From Service PO

    Hi All
    Service entry Sheet does not pick any Condition charges From Service PO. What could be the reason ?

    HI,
    Please check Sap note 381030
    Along with other thing It says
    "Delivery costs are generally not supported in external services management and in case
    of blanket purchase orders, item category D or B. Instead of representing delivery
    costs via conditions, in case of service documents, freight costs and other, SAP
    recommends to add in additional service lines."
    So that is the reason you are not getting those account entry in the time of service entry sheet
    Use another service line with text ( or service master) for the additional costs as suggested by SAP
    Hope it clarifies

  • Is there any there any scenario where we have to publish "Orchestration as WCF Service" and not "Schema as WCF service"

    Hi All,
    Recently in one interview a senior architect asked me this question-
    Q- In which scenario we have to publish "Orchestration as WCF Service" and not "Schema as WCF service".
    He also told there are some scenarios which can't be accomplished by exposing schema as WCF Service.
    As per my understanding below are the benefits of exposing Orchestration as a web service, but there is no such scenario where we can't be achieved by exposing Schema as WCF Service.
    Publishing orchestrations is a way to go when:
    Implementing simple solutions with small number of dependencies when we have control over both consumer and service endpoints
    * Rapid prototyping, proof-of-concepts, service stubs
    * Developing local scoped services, when collaboration is not an issue
    * Don’t care much about interoperability
    * No skilled XML Schema, WSDL developers available
    (http://geekswithblogs.net/paulp/archive/2006/03/21/72943.aspx)
    Please share your inputs.
    Thanks,
    Prashant
    Please mark this post accordingly if it answers your query or is helpful.

    First, the answer to the question as written is NO, because there really isn't a difference between the two options.
    To be more specific, the only difference is in the Wizard itself in that when you publish an Orchestration, the Wizard reads the request/response schema(s) and Service & Operation name from the Orchestration Port rather than asking for them as it does
    when you choose Publish schemas.
    Basically, if you choose Publish schemas and enter the same values configured in the Orchestration Port, the output will be the same.  So, publishing an Orchestration is merely a convenient shortcut.
    Most importantly though, all of this only affects the metadata publishing.  There is no difference in the Receive Location (BizTalk or IIS), if you chose to create one.  The receive stack is schema agnostic, always.
    In practice, the only thing the Wizard does that is difficult to do manually is organize the metadata, but I haven't had to create a metadata endpoint in years.  The only reason I even run the Wizards is to create the IIS app.

  • I have no cell service at my house, but when i leave it my iphone 5 will not pick up service unless i turn it off and back on????

    I have no cell service at my house, but when i leave it my iphone 5 will not pick up service unless i turn it off and back on????

    Reset all network settings, go into settings, general, reset network settings.

  • Pricing procedure picked up from the service order not from the contract

    Hello, All
    I am working on CRM 5.0 service order and service contract,
    While creating a service order a popup screen shows that there is a contract which should be assigned, after assigning the contract an error message appears showing that a condition type is missing, the missing condition type is in the pricing procedure of the service order not in pricing procedure of the service contract
    Note: I set the copy control for the item category to copy all the condition
    Regards
    Jacopo François

    Hi Jacopo,
    Please check your pricing procedure settings and check for mandatory pricing condition.
    Secondly, check the pricing agreement in the contract.
    Best Regards,
    Pratik Patel.
    Reward with points if it is of any help to you!

  • Custom Manage Property does not pick up the value from mapping crawl property

    Hi All,
    I have created a custom list with the column name that's called "category".
    Then I ran full crawl and I saw the "ows_category" crawl property is created.
    Then I create the manage property names as "Category" and map with the "ows_category" and run the full crawl again. (Retrivable, Searchable, Refinable options are checked)
    After full crawl, I searched Category:keyword but it returned 0 result. 
    But when I search keyword, that list item is retuned
    I tried to debug with the spsearch2013 tool and there is no "Category" manage property in the return XML.
    It seems the Manage Property does not pick up value from the crawl property. (Something might be wrong with the index schema)
    Do you have any suggestion?
    Do I need to reset the index?
    Best Regards,
    Andy

    Hi Andy,
    When you search ‘category’ in crawled properties(Central Administration->Search Service Application->Search Schema), you will see ows_Category is mapped to DiscussionCategory, like the screenshot:
    So, I suggest you create a new column using another name, then test again, compare the result.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

Maybe you are looking for

  • My iPad 1 no longer connects with the pc

    How can be fix it?

  • DND from a JList with a single gesture

    I am writing an application that allows users to drag an item from a JList in one JInternalFrame to a JList in another. The users are complaining that "sometimes it works and sometimes it doesn't". I'm using JDK 1.4.2_02. As an example of the require

  • IPhone - ICAl - Days of week order

    For a while I had 1 Ical synched with my iphone. The days of week started with Sunday. I now have 4 Icals set up and all start with Sunday which is set via my ICAL Pref. On mobile me, my calendars start with Sunday. For some reason, my phone starts w

  • Credit memo price issue.

    Dear Experts, Issue: When I am making Credit memo req with VA01 then price is coming but when I am enter creddit req to memo with the doc no in VF01 and execute then price is not coming, please let me know where i can do correction so that i can get

  • Displaying  arabic using j2me

    hi every body, my experience with j2me is very little and i need to display arabic text i am using eclipse and carbide j1.5 i searched the forum and i found that writing the following should work String s=new String("arabic_string".getBytes(), "UTF-8