Service PO's with PPS

Hi All.
I would like to know whether it is possible to activate PPS (Procurement for Public Sector) when we have Service PO's -
already. We currently going on SRM7 with ECS.
Please can anyone advise
Rgds
Sam

Hi ,
If you have srm70 scenario implemented and you activate PPS then you SRM system will be no more a normal SRM system.You will have only PPS functions in your system.
And once PPS is active you cant revert back
Regards
Sam

Similar Messages

Service desk integration with 3rd party tool

Hi all,
I've problems understanding the setup of connecting a 3rd party service desk tool with solman itsm.
So far it's clear that I need to activate and configure the service provider and consumer in soamanager.
The webservice then will be called by the 3rd party tool with corresponding data.
However, according to spro I need to define a value mapping for incoming/outgoing calls.
I do not understand this mapping... the WSDL of webservice ICT_SERVICE_DESK_API contains lots of fields, but in spro -> value mapping I can only define the following fields (which are hard coded in type pool AIICT):
SAPCategory
SAPComponent
SAPDatabase
SAPFrontend
SAPIncidentID
SAPIncidentStatus
SAPInstNo
SAPOperatingSystem
SAPSoftwareComponent
SAPSoftwareComponentPatch
SAPSoftwareComponentRelease
SAPSubject
SAPSystemClient
SAPSystemID
SAPSystemType
SAPUserStatus
What about attachments, priority etc.?
Will the interface parameters mapped to these ones?
For what purpose do I need to maintain the value mapping?
Can you give me a hint?
Regards, Richard Pietsch

can you please check the WIKI Solution manager Service Desk Integration with third party service desk - SAP Solution Manager - Security and Authorizat…

HT4942 After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

Web service proxy client with client cert cause SSLSessionNotFoundErr

Hi,
I tried to run web service proxy client with certification from JDeveloper 10.1.3.0.4 to call PKI enabled web service got folllowing error:
WARNING: Unable to connect to URL: due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: javax.net.ssl.SSLException: SSL handshake failed: SSLSessionNotFoundErr
Web service deployed on OAS

Hi,
i am trying to invoke from JDeveloper (10.1.3) a CRM On Demand's Web Service and I hava the same problem:
ADVERTENCIA: Unable to connect to URL: https://secure-ausomxgfa.crmondemand.com/Services/Integration due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: javax.net.ssl.SSLException: SSL handshake failed: SSLSessionNotFoundErr
java.rmi.RemoteException: ; nested exception is:
     HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: javax.net.ssl.SSLException: SSL handshake failed: SSLSessionNotFoundErr
     at testerlast.runtime.Contact_Stub.contactInsert(Contact_Stub.java:96)
     at testerlast.ContactClient.contactInsert(ContactClient.java:88)
     at testerlast.ContactClient.main(ContactClient.java:69)
Caused by: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: javax.net.ssl.SSLException: SSL handshake failed: SSLSessionNotFoundErr
     at oracle.j2ee.ws.common.util.exception.JAXRPCExceptionBase.<init>(JAXRPCExceptionBase.java:93)
     at oracle.j2ee.ws.common.util.exception.JAXRPCExceptionBase.<init>(JAXRPCExceptionBase.java:89)
     at oracle.j2ee.ws.client.ClientTransportException.<init>(ClientTransportException.java:33)
     at oracle.j2ee.ws.client.http.HttpClientTransport.invokeImpl(HttpClientTransport.java:144)
     at oracle.j2ee.ws.client.http.HttpClientTransport.invoke(HttpClientTransport.java:121)
     at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:169)
     at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:111)
     at testerlast.runtime.Contact_Stub.contactInsert(Contact_Stub.java:80)
     ... 2 more
To do the invocation I have done a proxy to consume this Web Service, with the follow main:
public static void main(String[] args) {
try {
testerlast.ContactClient myPort = new testerlast.ContactClient();
System.out.println("calling " + myPort.getEndpoint());
myPort.setUsername(nameUser);
myPort.setPassword(password);
ListOfContactData llista = new ListOfContactData();
ContactData[] contacts=new ContactData[2];
ContactData contact=new ContactData();
ContactInsert_Input input=new ContactInsert_Input();
// Login WS HTTPS
String idSesion=connexioWS_CRM.logon(URL,nameUser,password);
// Add contact
for (int i = 0; i < contacts.length; i++) {
contact.setId("ProvaWSCRM"+i);
contact.setContactFirstName("JDeveloper"+i);
contact.setContactLastName("prove"+i);
contact.setCellularPhone("77777777"+i);
contact.setDescription("Add contact with Id:"+contact.getId());
contacts=contact;
System.out.println("Id:"+contacts[i].getId()+" firstName:"+contacts[i].getContactFirstName()+" lastName:"+contacts[i].getContactLastName());
llista.setContact(contacts);
input.setListOfContact(llista);
input.setEcho("off");
System.out.println("Pwd:"+myPort.getPassword()+" Port:"+myPort._port+" endpoint:"+myPort.getEndpoint()+" user:"+myPort.getUsername());
myPort.contactInsert(llista,"LIC","Broadset","OFF");
// Logout en WS (HTTPS)
connexioWS_CRM.logoff(URL, idSesion);
} catch (Exception ex) {
ex.printStackTrace();
What's wrong? Any idea?
Thank you
Edited by: user12085357 on 31-oct-2009 10:39

Service PO creation with BAPI

Hi All,
I have to create a file upload program to create service PO's with BAPI_PO_CREATE1. Please if anyone can give me a example of it it would be great.
Thanks.
Malinda

Hi ,
Check out this program .
use this program for creating service po's using bapi.
*& Report ZMM_PO_CREATE1 *
REPORT ZMM_PO_CREATE1 .
data : POHEADER like BAPIMEPOHEADER occurs 0 with header line,
POHEADERX like BAPIMEPOHEADERX occurs 0 with header line,
POITEM like BAPIMEPOITEM occurs 0 with header line,
POITEMX like BAPIMEPOITEMX occurs 0 with header line,
POESLLC like BAPIESLLC occurs 0 with header line,
POACCOUNT like BAPIMEPOACCOUNT occurs 0 with header line,
POACCOUNTX like BAPIMEPOACCOUNTX occurs 0 with header line,
POCONDHEADER like BAPIMEPOCONDHEADER occurs 0 with header line,
POCONDHEADERX like BAPIMEPOCONDHEADERX occurs 0 with header line,
POCOND like BAPIMEPOCOND occurs 0 with header line,
RETURN like BAPIRET2 occurs 0 with header line.
data : po_no(10).
data : begin of it_head occurs 0,
ref(10),
bsart like ekko-bsart,
lifnr like ekko-lifnr,
ekorg like ekko-ekorg,
ekgrp like ekko-ekgrp,
bukrs like ekko-bukrs,
verkf like ekko-verkf,
telf1 like ekko-telf1,
ihrez like ekko-ihrez,
unsez like ekko-unsez,
kdatb(10),
kdate(10),
end of it_head.
data : begin of it_det occurs 0,
ref(10),
knttp like ekpo-knttp,
pstyp like ekpo-pstyp,
txz01 like ekpo-txz01,
matkl like ekpo-matkl,
werks like ekpo-werks,
afnam like ekpo-afnam,
ktext1 like esll-ktext1,
srvpos like esll-srvpos,
frmval1 like esll-frmval1,
frmval2 like esll-frmval2,
menge like esll-menge,
kostl like eskn-kostl,
sakto like eskn-sakto,
zzcode like eskn-zzcode,
kbetr like konv-kbetr,
end of it_det.
data : c_col1 TYPE i VALUE '0001',
c_col2 TYPE i VALUE '0002',
c_col3 TYPE i VALUE '0003',
c_col4 TYPE i VALUE '0004',
c_col5 TYPE i VALUE '0005',
c_col6 TYPE i VALUE '0006',
c_col7 TYPE i VALUE '0007',
c_col8 TYPE i VALUE '0008',
c_col9 TYPE i VALUE '0009',
c_col10 TYPE i VALUE '0010',
c_col11 TYPE i VALUE '0011',
c_col12 TYPE i VALUE '0012',
c_col13 TYPE i VALUE '0013',
c_col14 TYPE i VALUE '0014',
c_col15 TYPE i VALUE '0015',
c_col16 TYPE i VALUE '0016'.
data : v_currentrow type i,
v_currentrow1 type i.
data : itab_head like ALSMEX_TABLINE occurs 0 with header line,
itab_det like ALSMEX_TABLINE occurs 0 with header line.
data : file_head type RLGRAP-FILENAME,
file_item type RLGRAP-FILENAME.
file_head = 'C:Documents and SettingsDesktophead.xls'.
file_item = 'C:Documents and SettingsDesktopitem.xls'.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = file_head
i_begin_col = 1
i_begin_row = 1
i_end_col = 12
i_end_row = 50
tables
intern = itab_head
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = file_item
i_begin_col = 1
i_begin_row = 1
i_end_col = 16
i_end_row = 50
tables
intern = itab_det
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF itab_head[] IS INITIAL.
WRITE:/ 'No Header Data Exists '.
STOP.
ELSE.
sort itab_head by row col.
read table itab_head index 1.
v_currentrow = itab_head-row.
loop at itab_head.
if itab_head-row ne v_currentrow.
APPEND it_head.
v_currentrow = itab_head-row.
ENDIF.
CASE itab_head-col.
WHEN c_col1.
it_head-ref = itab_head-value.
WHEN c_col2.
it_head-bsart = itab_head-value.
WHEN c_col3.
it_head-lifnr = itab_head-value.
WHEN c_col4.
it_head-ekorg = itab_head-value.
WHEN c_col5.
it_head-ekgrp = itab_head-value.
WHEN c_col6.
it_head-bukrs = itab_head-value.
WHEN c_col7.
it_head-verkf = itab_head-value.
WHEN c_col8.
it_head-telf1 = itab_head-value.
WHEN c_col9.
it_head-ihrez = itab_head-value.
WHEN c_col10.
it_head-unsez = itab_head-value.
WHEN c_col11.
it_head-kdatb = itab_head-value.
WHEN c_col12.
it_head-kdate = itab_head-value.
ENDCASE.
ENDLOOP.
APPEND it_head.
CLEAR it_head.
ENDIF.
IF itab_det[] IS INITIAL.
WRITE:/ 'No Item Data Exists '.
STOP.
ELSE.
sort itab_det by row col.
read table itab_det index 1.
v_currentrow1 = itab_det-row.
loop at itab_det.
if itab_det-row ne v_currentrow1.
APPEND it_det.
v_currentrow1 = itab_det-row.
ENDIF.
CASE itab_det-col.
WHEN c_col1.
it_det-ref = itab_det-value.
WHEN c_col2.
it_det-knttp = itab_det-value.
WHEN c_col3.
it_det-pstyp = itab_det-value.
WHEN c_col4.
it_det-txz01 = itab_det-value.
WHEN c_col5.
it_det-matkl = itab_det-value.
WHEN c_col6.
it_det-werks = itab_det-value.
WHEN c_col7.
it_det-afnam = itab_det-value.
WHEN c_col8.
it_det-srvpos = itab_det-value.
WHEN c_col9.
it_det-ktext1 = itab_det-value.
WHEN c_col10.
it_det-frmval1 = itab_det-value.
WHEN c_col11.
it_det-frmval2 = itab_det-value.
WHEN c_col12.
it_det-menge = itab_det-value.
WHEN c_col13.
it_det-kostl = itab_det-value.
WHEN c_col14.
it_det-sakto = itab_det-value.
WHEN c_col15.
it_det-zzcode = itab_det-value.
WHEN c_col16.
it_det-kbetr = itab_det-value.
ENDCASE.
ENDLOOP.
APPEND it_det.
CLEAR it_det.
ENDIF.
loop at it_head.
poheader-doc_type = it_head-bsart.
poheader-vendor = it_head-lifnr.
poheader-purch_org = it_head-ekorg.
poheader-pur_group = it_head-ekgrp.
poheader-comp_code = it_head-bukrs.
poheader-sales_pers = it_head-verkf.
poheader-telephone = it_head-telf1.
poheader-REF_1 = it_head-ihrez.
poheader-OUR_REF = it_head-unsez.
poheader-VPER_START = it_head-kdatb.
poheader-VPER_END = it_head-kdate.
loop at it_det where ref = it_head-ref.
poitem-acctasscat = it_det-knttp.
poitem-item_cat = it_det-pstyp.
poitem-short_text = it_det-txz01.
poitem-matl_group = it_det-matkl.
poitem-plant = it_det-werks.
poitem-PREQ_NAME = it_det-afnam.
POESLLC-SERVICE = it_det-srvpos.
POESLLC-SHORT_TEXT = it_det-ktext1.
POESLLC-FORM_VAL1 = it_det-frmval1.
POESLLC-FORM_VAL2 = it_det-frmval2.
POESLLC-QUANTITY = it_det-menge.
POACCOUNT-COSTCENTER = it_det-kostl.
POACCOUNT-GL_ACCOUNT = it_det-sakto.
POCONDHEADER-COND_TYPE = 'R000'.
POCONDHEADER-COND_VALUE = it_det-kbetr.
endloop.
endloop.
poheaderx-doc_type = 'X'.
poheaderx-vendor = 'X'.
poheaderx-purch_org = 'X'.
poheaderx-pur_group = 'X'.
poheaderx-comp_code = 'X'.
poheaderx-sales_pers = 'X'.
poheaderx-telephone = 'X'.
poheaderx-REF_1 = 'X'.
poheaderx-OUR_REF = 'X'.
poheaderx-VPER_START = 'X'.
poheaderx-VPER_END = 'X'.
poitemx-acctasscat = 'X'.
poitemx-item_cat = 'X'.
poitemx-short_text = 'X'.
poitemx-matl_group = 'X'.
poitemx-plant = 'X'.
poitemx-PREQ_NAME = 'X'.
*POESLLCx-SHORT_TEXT = 'X'.
POACCOUNTx-COSTCENTER = 'X'.
POACCOUNTx-GL_ACCOUNT = 'X'.
POCONDHEADER-cond_type = 'X'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = poheader
POHEADERX = poheaderx
POADDRVENDOR =
TESTRUN =
MEMORY_UNCOMPLETE =
MEMORY_COMPLETE =
POEXPIMPHEADER =
POEXPIMPHEADERX =
VERSIONS =
NO_MESSAGING =
NO_MESSAGE_REQ =
NO_AUTHORITY =
NO_PRICE_FROM_PO =
IMPORTING
EXPPURCHASEORDER = po_no
EXPHEADER =
EXPPOEXPIMPHEADER =
TABLES
RETURN = return
POITEM = poitem
POITEMX = poitemx
POADDRDELIVERY =
POSCHEDULE =
POSCHEDULEX =
POACCOUNT = poaccount
POACCOUNTPROFITSEGMENT =
POACCOUNTX = poaccountx
POCONDHEADER = pocondheader
POCONDHEADERX = pocondheaderx
POCOND =
POCONDX =
POLIMITS =
POCONTRACTLIMITS =
POSERVICES = poesllc
POSRVACCESSVALUES =
POSERVICESTEXT =
EXTENSIONIN =
EXTENSIONOUT =
POEXPIMPITEM =
POEXPIMPITEMX =
POTEXTHEADER =
POTEXTITEM =
ALLVERSIONS =
POPARTNER =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT =
IMPORTING
RETURN =
if sy-subrc = 0.
loop at return.
write return-MESSAGE_V1.
write po_no.
endloop.
endif.
Also check this link
[Service Order through BAPI|Service PO creation with BAPI;

A web service design issue with patterns

Hello,
I�d like to ask for your help in the following design issue:
I need to create an email sending web service (with Axis). Only just one method which returns with an integer return code. This handles the following:
- based on the given parameters gets the email addresses from an
LDAP server (with netscape ldap for java)
-     makes a cache from them (only after a timeout period will be the cache
refreshed) (don�t know what tool to use for this)
-     selects html templates which to be sent based on the given parameters
-     sends emails with the appropriate templates (with Velocity)
-     the whole process is logged (with log4j)
I have to write the code as generic as possible. I know that some design pattern should be used for this. (some from GoF , and I know there exists design patterns specially created for web services as well).
Could you enumerate me which patterns (and for what part of the program) would be the best choice to solve this problem? I have read through some books about patterns, but don�t have the knowledge to pick up the right one for a concrete problem like this..
Thank you in advance,
nagybaly

Hello,
I�d like to ask for your help in the following design
issue:
I need to create an email sending web service (with
Axis). Only just one method which returns with an
integer return code. This handles the following:Lots of responsibilities here. You would do well to break this up into several classes that you can test separately.
I would also advise that you not embed all this in a servlet. Make a service that collaborates with several objects to accomplish the task and let the serlvet just call it.
.> - based on the given parameters gets the email
addresses from an
LDAP server (with netscape ldap for java)I'd recommend Spring's LDAP module. Pretty terrific stuff.
cache from them (only after a timeout period will be
the cache
refreshed) (don�t know what tool to use for
this)Maybe EhCache or OsCache or something like that.
-     selects html templates which to be sent based on
the given parametersWhere does this come from? Certainly not the LDAP. A relational database? Write a DAO for the document template.
-     sends emails with the appropriate templates (with
Velocity)Have an e-mail sender service using Java Mail.
-     the whole process is logged (with log4j)Easily done.
I have to write the code as generic as possible. I
know that some design pattern should be used for
this. No pattern. There might be patterns, if you say that the DAOs to access the LDAP and RDB are patterns.
Stop thinking patterns and start thinking objects.
(some from GoF , and I know there exists design
patterns specially created for web services as
well).Nope.
Could you enumerate me which patterns (and for what
part of the program) would be the best choice to
solve this problem? I have read through some books
about patterns, but don�t have the knowledge to pick
up the right one for a concrete problem like this..
Thank you in advance,
nagybalyYou haven't read them because they aren't there. Your problem is pretty specific, even if it's common.
%

Taken to the Ombudsman Service - My story with BT

6 months with BT:
We purchased our BT package; broadband, phone, and vision in January 2011, after we had moved house,and previously were with Virgin Media.
Upon purchasing our package we were informed by an advisor that we would be offered the Large broadbandpackage, and 3 months half price for our whole package, to 'entice' us in. Our contract came through, andunfortunately didn't show the information the advisor had provided us. So I contacted BT and submitted acomplaint; I was later emailed by the lady who had first informed me of the 'deal' which she eventually sortedout over a few email's. (I put to the back of my mind, that the advisors grammar was appalling, and she used'I' rather than 'I', and was using some bizarre font's and colours in her email's).
I even contacted her manager, and provided positive feedback for ensuring that the situation was resolved. Atthis point, I was relatively happy with the Customer Service I received.
However, the positive feedback didn't last long - BT tried to debit £200 for a cancellation charge in February'sbill as the female advisor unpackaged my bundle, and didn't inform the relevant department of this. BT cutmy services during this time, as they thought I had cancelled my package. They apologised, and reinstatedthe services eventually.
On 25 January 2011 I was having some technical issues with our broadband and vision service, so contactedthe technical support department. I was struggling with the advisor as it was extremely hard to understandhim, and therefore asked questions a long the way to ensure I was doing everything correctly. The advisorseemed to get very frustrated and told me that I was 'stupid'. I immediately terminated the call and filed acomplaint. I received correspondence on 04 February 2011, to confirm that they were unable to trace mytelephone call, even though the Live Chat advisor confirmed the name and time that the call was made.
I was not happy with the response I received to my complaint, and later received an email to my work toapologise for the inconvenience. The Customer Care representative confirmed the way in which the advisorspoke to me was unacceptable, and offered us 1 months' free Vision 'films', and offered to refund mytelephone call charges. Again, although getting my complaint through was a struggle, I was happy with theresolution.
However, March's bill came through and I was charged £12 for my 'free films', a £7.50 disconnection fee, an£11 charge, and £25 worth of bank charges as my bill somehow managed to amount to £67.00. After manyemail's, between advisors who could not spell, and their English was really disappointing, I sent a letter toBT with 12 pages worth of correspondence.
I finally received a reply approximately 2 weeks ago, to confirm that my charges would be refunded off mynext bill; I was unhappy with this as I wanted the charges to be refunded to by bank account in order toindemnify me, as BT took me out of the financial position I was previously in, by erroneously charging meduring March 2011.
I had a lengthy telephone conversation with an advisor last week, after our services were disconnected, toconfirm that April's bill was reduced to £20.09 as they had refunded around £50 worth of charges. The advisorconfirmed that April's bill was originally going to be £75; they failed to break this down for me, which isunbelievable. I cannot see how BT can justify charging £75 for services that fail to provide what they say theydo.
I have now raised a complaint with the Ombudsman Service (OS) as BT have provided a complete shamblesof a service, both technically and with regard to Customer Service. I work in the Complaints Department foran Insurance Company; none of the above would be acceptable to us, let alone the way in which wecommunicate with our customers.
I have mentioned all of the above to the OS for them to consider, who will send a termination request to BT.It's unfortunate that the whole situation has come to this, but as a consumer I refuse to pay for a service thatI am not receiving. I am currently receiving a 1.8 Mbps Internet speed, whereas Virgin Media will provide5Mpbs in the same area/postcode/house number.
Please see my story:
http://community.bt.com/t5/Bills-Call-Packages/Taken-to-the-Ombudsman-Service-My-story-with-BT/td-p/211003

I will make sure to keep you updated:
I just took 3 minutes and 42 seconds to load up a webpage, to then get told there is 'limited connectivity'; it must be such hard work for BT to run Broadband and Vision at once ....
I'm not entirely sure why I am receiving the large internet package - for the purpose of using my PS3 online - as I cannot use it due to the poor connection.
Okay, so we'll do another speed test:
Wow - I'm not even sure what to say to this! I'm not even sure how I'm typing this with such a slow speed.
We'll go to another website now so we can get the 'average':
Other speeds in my area, Last updated: 11/06/2011 18:18:37, between 3.8Mbps - 20+Mbps.
Please see my story:
http://community.bt.com/t5/Bills-Call-Packages/Taken-to-the-Ombudsman-Service-My-story-with-BT/td-p/211003

Service purchase order with quantity

Hi all,
Is it possible to create a service purchase order with quantity ?
Our client is using sap b1 2005b pl39.
Expecting you all valuable reply.
Jeyakanthan

Hi, Jeyakanthan,
I guess there are 2 ways out for this:
1. Define the Service as an item ...i.e. create aitem master for it.Then you can define the quantities for it.
2. Use a UDF in the service type document as quantity and put a FMS to calculate the qty.
Nagesh

Opening a search service via Mail with Chrome and not Safari

Hello all,
Is there an option to open a search service via Mail with my default browser (Chrome) instead of Safari. This works while searching from the browser itself but not the Mail app, have not experimented with other os x apps.

Then check the Mail preferences for a default broswer entry and change that to Chrome. Not sure if it is in there as I stopped using Mail several years ago.
To completely get rid of this problem stop using Mac Mail.app and switch to some other mail program that actually works correctly.

Anyone have no service pop up with the new update and stay like that?

Anyone have no service pop up with the new update and stay like that

Try a Reset holding the Sleep button and the Home button together until Apple logo shows up and then wait for the Reset to return you to the lock-screen. If you still don't have service check Settings>General>About and then scroll down to Carrier and see if your Service Provider is listed.

Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)

Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano Villanueva

Hi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva

You cannot open window Service Call Form with your current license 8.8

Hi Expersts,
I am trying allocate license for users in 8.8 (PATCH 09) , I am assigning properly but when log in to assigned user i am continously getting the following error. again i checked license has been allocated correctly. it is a CRM License
Kindly help
You cannot open window [60110] Service Call Form with your current license
Regards
Mohamed

Dear Mohamed,
This issue probably occurs due to the application error described in the SAP Note [1456922|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1456922].
When login B1 with incorrect upper/lower cases for the user name (eg. The user name is registered "manager" but login as "Manager"), the user can login successfully but fails to open a certain form window the user has permission.
This issue is planned to be fix in a Patch of 8.8.
As workaround, until the issue will be fixed, the users should use exactly the same user name as itu2019s represented in the OUSR table, with case sensitive user code.
hope it helps,
Regards,
Ladislav Meszaros
SAP Business One Forum Team

How to Create web service using JMS with PUB/SUB pattern.

Hi All,
I need to expose web service using JMS with PUB/SUB pattern.
if you have any source for this.
I tried to use @WLJmsTransport annotation but unable to get it done.
I have configured all JMS server, topic, and connection factory.
Thanks.

Hi, I am having web sample web service program which is simple one.
But I need to Modify this to JMS enable.
Can any one help me?
Thanks.

User exit or BADI to validate service request value with PO value

Dear gurus,
Is there any userexit or BADI to validate service request value with PO value. Please help me regarding this.
Thanks in advance

Hi,
Please check these enhancements (SMOD) for user exits available of transaction ML81N.
SRV_FRM - SRV: Formula calculation (obsolete since 4.0A!)
SRVSEL   - Service selection from non-SAP systems
SRVREL   - Changes to comm. structure for release of entry sheet
SRVQUOT - Service export/import for inquiry/quotations
SRVPOWEB - Purchase order for service entry in Web
SRVMSTLV - Conversion of data during importing of standard service cat.
SRVMAIL1 - Processing of mail before generation of sheet
SRVLIMIT - Limit check
SRVKNTTP - Setting the account assgnmt category when reading in, if "U"
SRVEUSCR - User screen on entry sheet tabstrip
SRVESSR - Set entry sheet header data
SRVESLL - Service line checks
SRVESKN - Set account assignment in service line
SRVESI   - Data conversion entry sheet interface
SRVENTRY - Unplanned part of entry sheet (obsolete since Rel. 3.1G)
SRVEDIT - Service list control maintenance/display)
SRVDET    - User screen on tab strip of service detail screen
INTERFAC - Interface for data transfer
Regards,
Ferry Lianto

Connecting SQL Analysis Services 2005 cube with obiee 10g

Hello experts,
I'm trying to link an SQL Analysis Services 2005 cube with obiee 10g.
In Oracle BI Administration, when I choose File -> Import -> From
Multi-dimensional, I have to fill the next gaps:
Provider Type: Analysis Services 2005
URL: ***********
User: blank
Password: blank
Before to do that, I need to create the URL path.
To create the URL, I have followed this link.
http://erpthings.blogspot.com/2008/08/obiee-connection-to-msas-2005-
cube.html
But, it hasn't worked because when I was trying to configure the HTTP
access to SQL Server 2005 Analysis Services, we have to perform a test to ensure that it has been well configured. In IIS -> WebSites -> Default WebSites -> olap, we should browse the document called "msmdpump.dll" and this should show an xml document, but it doesn't.
Thanks!

Hi Alex
It sounds like your MS data pump might not be configured correctly. First ensure that is working before trying to put the values into OBIEE. Don't worry about the 500 error - I get that too instead of an XML page.
You can read a bit more about SSAS support on my blog here:
http://total-bi.com/2010/12/obiee-sql-server-analysis-services-cubes/
Here's the link to Microsoft's description of setting up msmdpump.dll
http://technet.microsoft.com/en-us/library/cc917711.aspx
Paul

Service PO's with PPS

Similar Messages

Maybe you are looking for