Service PO - Short Closing

Hi,
To short close service PO, we are putting final entry sheet tick in ML81N for the last entry sheet.
But if invoice is already parked/posted against the last entry sheet, and if the said service PO is having pending quantity it does not allow to put final entry sheet tick against last entry sheet.
In such case how can we short close the service PO?
Kindly advice.
Thanks & Regards
Ratna

Dear Prasanna,
Even after putting final invoice tick it allowed me to create service entry sheet.
So, I had reduced PO qty to desired entry sheet qty.
Thanks for your help.
Regards
Ratna

Similar Messages

  • Can I process vendor bills if the PO is put to delivery complete(short closed)..?

    Hi All,
    I have released PO#4500000001 for 2 units of X.
    Subsequently 1 unit of X is delivered in my plant against this PO and bills against the GR are not booked.
    Due to some undisclosed reasons, I have put tick mark to delivery complete indicator and PO has gone for versions, followed by amendment release.
    In this stage system is not allowing us to process the bills against the GR which is already posted unless the amendment is released.
    Is there a way out of this situation, where we can still process bills even if PO is short closed...?

    Hi,
       As I already explained, the issue for the error in MIRO is that the PO is not released, not because of short closure. It is related to PO short closure in such a way that the short closure might have triggered new version in PO, which in turn triggered new release. It is purely with your release configuration design. You may check the same and redesign if required.
       Please check the release characteristics in CL24N or in the configuration.
       If the release is triggered, then it has to be released if you want to further use the PO in subsequent documents.
    Hope its clear.
    Regards,
    AKPT

  • PO for item of service Level short and long text using sap script

    Please let me know how to do the PO for item of service Level short and long text using sap script.
    <MOVED BY MODERATOR TO THE CORRECT FORUM>
    Edited by: Alvaro Tejada Galindo on May 5, 2009 10:25 AM

    Hi ,
          In the transaction related to PO select the path goto->header texts and then details of the texts like ID,objectname,language,name.Pass all theses details to 'READ_TEXT '   FM. Then you will get text lines described for a perticular Po ,similarly for item also.
    Thanks,
    Suma.

  • Service entry short text needs to default in MIGO item text

    Dear SAP Gurus,
    How service entry short text can be default in MIGO item text,
    currently system is defaulting service text in Text filed in MIGO(MSEG - SGTXT )
    can any body let us know.
    Thanks in advance
    Vinod
    Edited by: Vinod Malagi on May 25, 2009 1:58 PM

    Hi Chakrapani,
    The functionality i am awere, in that while passing service entry sheet both service number and backend MIGO transaction will be called for MIGO transaction the service text from the service entry sheet needs to populate in MIGO text ,
    but the standard functionality is defaulting from item service text
    please suggest the same.
    VInod

  • In ME2L transaction, Still to be delivered Qty showing after Short Closed

    Hi,
    We have a PO with 50 qty pending, which is showing in ME2L transaction. Now we want to short close this PO.
    Through ME22N transaction, we has short closed this PO.
    But till now, in ME2L Still to be delivered qty showing 50. How can we see the Open PO list now...
    Regards..

    Hi Anil,
    How u have short closed PO.
    Select PO Line items and click on Lock symbol for blocking.
    then execute ME2L transaction, so that you can see "To be Del. Qty." as Zero
    Regards,
    VB Rao

  • Services are getting closed.

    Hi all,
    I do have SUN 420R with Solaris 9 with Oracle database and webbase application running.
    The services are to be started and stopped by the appliation shelll scripts.
    And when i tried to start them they are working fine. but they all runnig untill i close the window in
    which i have started. Soon after closing the window the services are getting closed .
    I tried several time but i could not .
    Somebody advised me to type "exit" and then close the window .
    but no use, still the problem stays like that only.
    CAN ANYBODY HELP ME IN this matter.............................??????????????????????
    Thanks in advance.

    nohup the shell script that you use to start the processes.
    man nohup
    will show you what you can do.

  • GRN against short closed PO

    Hi,
    System is allowing to post the GRN against those POs which are already short closed...which is wrong.
    Can anybody plz suggest how to put ERROR Message in GRN while posting against short closed PO ???
    Regards,
    Raghunath

    See SAPs explanation here:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63343943a211d189410000e829fbbd/frameset.htm
    I told you the options you have.
    If you want it differently SAPs design, then you have to check this with own logic in a user exit.
    Maybe you should analyze why you still get material after you have closed the order. Did you forget to tell your vendor that the order is closed?

  • Short Closing of Orders

    Hi Gurus,
    Could any one explain about Short Closing of Order.
    In case of comming Budget changes, how to handle the open and partially delivered orders in case any changes in percentage of Excise duties.
    Short closing of Order - is this solution is suggestable?
    If yes how to proceed with the chanes.
    If no, can any one suggest me what could be the corrective action to be taken.

    Hi,
    I think there is no requirement of short closing just for ED changes.  You can probably think of the following instead.
    1. Update the orders with new pricing.
    2.Change the billing copy control so that new pricing will take effect in the forthcoming billing documents, for the existing orders which are already delivered partially.
    Thanks
    Krishna.

  • Short closing of Service PO

    Frenz..
    I need to short close the Service PO for which Final Service indicator did not set at the time of creating service entry sheet.
    Kindly send me the link or 5-10 points (guidelines) for the same.
    I will appreciate yore early response.
    =-=
    Pradip Gawande

    Hi,
    I would advice you to read the notes 735404, 634298, 772206
    and 204376.
    Regards,
    Edit

  • WCF service connection forcibly closed by the remote host for large data

    Hello ,
                        WCF service is used to generate excel report , When the stored procedure returns large data around 30,000 records. Service fails
    to return the data . Below is the mentioned erorr log :
    System.ServiceModel.CommunicationException: An error occurred while receiving the HTTP
    response to <service url> This could be due to the service
     endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by
    the server (possibly due to the service shutting down). See server logs for more details. ---> System.Net.WebException:
    The underlying connection was closed: An unexpected error occurred on a receive. ---> System.IO.IOException:
    Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
    ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
       at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)
       at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
       --- End of inner exception stack trace ---
       at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
       at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size)
       at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.GetResponse()
       at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout).
       --- End of inner exception stack trace ---
    Server stack trace:
       at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
       at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
       at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
       at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at IDataSetService.GetMastersData(Int32 tableID, String userID, String action, Int32 maxRecordLimit, Auditor& audit, DataSet& resultSet, Object[] FieldValues)
       at SPARC.UI.Web.Entities.Reports.Framework.Presenters.MasterPresenter.GetDataSet(Int32 masterID, Object[] procParams, Auditor& audit, Int32 maxRecordLimit).
    WEB CONFIG SETTINGS OF SERVICE
    <httpRuntime maxRequestLength="2147483647" executionTimeout="360"/>
    <binding name="BasicHttpBinding_Common"  closeTimeout="10:00:00"  openTimeout="10:00:00"
           receiveTimeout="10:00:00"  sendTimeout="10:00:00"  allowCookies="false"
           bypassProxyOnLocal="false"  hostNameComparisonMode="StrongWildcard"
           maxBufferSize="2147483647"  maxBufferPoolSize="0"  maxReceivedMessageSize="2147483647"
           messageEncoding="Text"  textEncoding="utf-8"   transferMode="Buffered"
           useDefaultWebProxy="true">
    <readerQuotas     maxDepth="2147483647"
          maxStringContentLength="2147483647"  maxArrayLength="2147483647"
          maxBytesPerRead="2147483647"  maxNameTableCharCount="2147483647" />
         <security mode="None"> 
    WEB CONFIG SETTINGS OF CLIENT
    <httpRuntime maxRequestLength="2147483647" requestValidationMode="2.0"/>
    <binding name="BasicHttpBinding_Common"
           closeTimeout="10:00:00"       openTimeout="10:00:00"
           receiveTimeout="10:00:00"       sendTimeout="10:00:00"
            allowCookies="false"        bypassProxyOnLocal="false"
            hostNameComparisonMode="StrongWildcard"        maxBufferSize="2147483647"
            maxBufferPoolSize="2147483647"        maxReceivedMessageSize="2147483647"
            messageEncoding="Text"        textEncoding="utf-8"
            transferMode="Buffered"        useDefaultWebProxy="true">
     <readerQuotas
           maxDepth="2147483647"
           maxStringContentLength="2147483647"
           maxArrayLength="2147483647"
           maxBytesPerRead="2147483647"
           maxNameTableCharCount="2147483647" />   

    Doing binding configuration on a WCF service to override the default settings is not done the sameway it would be done on the client-side config file.
    A custom bindng must be used on the WCF service-side config to override the defualt binding settings on the WCF service-side.
    http://robbincremers.me/2012/01/01/wcf-custom-binding-by-configuration-and-by-binding-standardbindingelement-and-standardbindingcollectionelement/
    Thee readerQuotas and everything else must be given in the Custom Bindings to override any default setttings on the WCF service side.
    Also, you are posting to the wrong forum.
    http://social.msdn.microsoft.com/Forums/vstudio/en-us/home?forum=wcf

  • Service PO Short close

    hi Guru's
    I am new to MM module and would like your expert advise on one issue related to short close of Service PO.
    to short close the Service PO; I will have to Mark the Service entry sheet as final entry sheet.
    and change the quantity in PO to entrysheet quantity so that further processing will not be allowed.
    while doing this I have some doubts which i would like to get clarified.
    Currently the PO is open with remaining quanity of 10 and only entrysheets of quanity 2 are created in year 2009.
    the invoice already exists for the entrysheet.
    I want to mark the entry sheet as" final entry" in set status but, before i do that i need to cancel the entry sheet release which is currently in accepted state.
    when i am canceling the release it shows me error that invoice already exixts. so i guess i will have to go to MR8M and reverse the Invoice first.
    my doubt is as entry sheet was created in 2009 and invoice was also created by then , will it allow me to reverse the doc.
    If I do that what will be implications? and wht steps will i have to take.
    Appreciate your views and solution for the same
    Regards,
    Paresh Kolte.

    if you are going to reverse the transaction in todays date, then there will be no implications provided you had reversed all the follow-up documents.
    1. reverse the invoice
    2. cancel the SES acceptance
    3. Make the SES status as final Entry sheet and do its acceptance.
    Regards,
    S Anand

  • Service po short close for  project closure

    Dear All,
    My client has a project which is to be closed but there is committment in service po we have tried to set a final service entry indicator and final invoice still the commitment remains is there any other way that can be closed
    Regards,
    Reena

    Goto ME22N, block that PO line item (select PO line item and lock it), balance commitments will be blocked. Then system will allow you to close the project.
    with regards
    M Umapathy
    Edited by: Maripalli Umapathy on Dec 6, 2011 4:29 PM
    Edited by: Maripalli Umapathy on Dec 6, 2011 4:30 PM

  • SOAP Native service flop: "Connection closed..", ready for production???

    Our system: Oracle 11GR2 on Linux X64 CentOS.
    I followed instructions like here: http://www.oracle-base.com/articles/11g/NativeOracleXmlDbWebServices_11gR1.php, so far so good, I can display the WSDL on broswer. Now for real world testing, I wrote a Visual studio.net 2010 application to use the service, after the very first time ( successfullly returned value), I got exception like:
    The underlying connection was closed: A connection that was expected to be kept alive was closed by the server.
    I googled and tried all kinds of tricks, like keepalive=TRUE but no joy. Some people suggested .net has a bug so I use SOAPUI and SOAPsonar, which returnes the same "The Underlying connection was closed" error; I tried to make the session timeout as long as possible still no help, I seem to run out of options, so I tried to configure Oracle HTTP server(instead of the Embeded Gateway) an entry point for /orawsv ( I found no existing sample for this kind of using HTTP server with web service configuration so I took one from APEX configuration inside the dads.conf file ) but it did not work out, so there is almost the end of my native web service miracle(no coding) solution....
    The only working case for Oracle SOAP service is : when I use Oracle APEX, it's working fine without any flops. looks like any non-Oracle client won't take Oracle SOAP service from XDB......
    Questions:
    1. Does anyone else have real working case by using NON-Oracle client application with Oracle XMLDB native web serivices?
    2. is it possible to configure Oracle HTTP server 10G working with this native services?
    3. Did I miss any parameters on xdbconfig.xml so this kind of death sentence won't happen? ( almost everything is default except the HTTP PORT#)
    Any suggestions and advises are greatly appreciated
    Edited by: seanzh on Mar 17, 2011 10:28 AM
    Edited by: seanzh on Mar 17, 2011 10:29 AM
    Edited by: seanzh on Mar 17, 2011 10:31 AM

    Oracle APEX does not use SOAP, or the SOAP Provider... It uses EGP which is totally different implementation, the fact that it works or fails is irrelevant to a discussion of database native web services..
    1. Does anyone else have real working case by using NON-Oracle client application with Oracle XMLDB native web serivices?
    I have written a number of applications that use Browser XMLHTTP controls to invoke Soap Services... They have been tested with IE and FIREFOX. I have also tested extensively with XMLSPY's (Altova) Soap Infrastructure..
    2. is it possible to configure Oracle HTTP server 10G working with this native services?
    No Native Web Services are a part of Oracle Database 11g.
    3. Did I miss any parameters on xdbconfig.xml so this kind of death sentence won't happen? ( almost everything is default except the HTTP PORT#)
    Doesn't sound like it assuming you can get a WSDL from he following URL
    http://servername:port/orawsv?wsdl
    Soap is based on HTTP, which is a stateless protocol so connections should not be open once the request is complete..
    Do you have (or can you download a trial) of XMLSpy and test with that stack...
    Can you check for any shared servers errors reported in the alert.log, found the trace directory of the server

  • Transfer of Service master short text  from PR to PO

    Hi All,
    We have a scenario where we use Generic service number to order one time services. Based on the requirement we keep on changing the short text (description) of the service master in PO or Purchasing requisition. The issue is - Short text on generic service master is changed in PR but it is keep on reverting to original short text as in service master while converting PR to PO. . 
    For Example :
    Service master - Code - 100001 - Description - "Generic Corp Miscellaneous Services"
    I created a PR, included service no 100001 and changed the description of short text to - "Fixing tiles at foyer". Now when I converted PR to Purchase order service description should transfer to PO. But it is showing as 'Generic Corp Miscellaneous Services'. After investigation I found it is coming from the Contract that is linked with the PR as source of supply. And if I removed the Contract from the source of supply short text transfers from PR to PO. So Contract get precedence over PR.
    The requirement is - short text of service master should transfer from PR even when source of supply is Contract. It means always transfer short text from PR to PO not from contract. Is there any user exit/ config or change to ABAP code is required.
    Any help is greatly appreciated.

    Hi
    If you have document management system active in your system and if it the document type of documnet (which you created in CV01N) has link object PO and PR. Surely it will be transafred from PO to PR. But if you have added document in service object in Me52N then it will never go to PO automatically.
    Thanks and Regards
    Antony

  • My Iphone says No Service then shortly after will turn off then back on.

    Ive had this iphone for about 2 years. It is in perfect condition. i was using it all day the day it started messing up. I was taking pictures and i was uploading them to facebook. My facebook became slow and not working right so i restarted my iphone and all of a sudden in the corner it says NO SERVICE. I wasnt really trippen about it because i have a prepaid sim card in it that i havent paid in 2 months or so. But it shortly turned off and turned back on by itself. It was doing that until the battery died all the way. That was when i got kinda scared.
    Today i plugged it into Itunes and restored it. it still says no service. but it hasnt turned off yet. Im waiting for it.
    Can anyone tell me why its doing this?
    PS. I absolutaly have not dropped it in water so it cant be water damage.

    Hello,
    Is it really an iPhone 3G with iOS 5.1? I thought it was no longer supported.
    I had that occurred to me before but I restored it from an existing backup and the problem went away. If you could, you can try and upload your crash logs from ios 5+ and see what is causing the restart.
    If there is nothing to lose (e.g. Data), then you can see if a full restore (e.g. Set it to factor settings)  will help. Below is a link:
    http://support.apple.com/kb/HT1808
    I hope this helps but please feel free to wait for others to input.

Maybe you are looking for