Service Portal Console Displaying "Virtual Machine Manager lost the connection to the virutal machine"

Hey All,
The issue we are having is that our admins and users cannot use the web console in the Service Portal.
When they right click on the VM and go to console a new tab opens and a message appears where the Console should appear stating: Virtual Machine Manager lost the connection to the virtual machine
We have tried Chrome/Firefox and IE 9/10/11. With Firefox and Chrome it just tries to load the Console Session.
Wonder if the community can provide some insight.
Thanks

Hi Boris,
Are your hosts Hyper-V hosts? Console connect makes use of an ActiveX control and users will need permission to install the ActiveX control.
This ActiveX control will then connect directly to the Hyper-V host that is running the virtual machine, which requires the client computer to have connectivity to the Hyper-V hosts and the user will need permission on the Hyper-V server.
Kind Regards,
Richard
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

Trying to deploy a Service using Orchestrator and Virtual Machine Manager

Hello,
I'm trying to create a runbook to deploy a Service in a cloud using Orchstrator and Virtual Machine Manager, 2012 R2 both of them.
I'm following these 2 links, but not luck.
http://daniyar-tech.blogspot.com.es/2013/07/system-center-2012-sp1-orchestrator.html
http://www.systemcentercentral.com/orchestrator-by-example-deploying-a-service-from-template-with-vmm-and-orchestrator-2/
I'm receiving this error in "Configure Service Deployment" step:
The following errors occurred when invoking PowerShell script:Could not find service template
I configured the Cloud Name and it does not work for me...
Thanks!

Thanks, Marc! This solution worked for me, after many other attempts failed.
Senior Tech Writer, SharePoint Performance and Capacity Management

Remote Desktop Services Role on a Virtual Machine (VM) Requirements

Does MS recommend installing RDS Role on Hardware or Virtual Machine? I have a use case where I have about 35 people that will be using the Internet Explorer and possibly run additional piece of software. I'm having trouble determining if the RDS Role on
Virtual Machine will be able to sustain the load of so many users. Should the same performance metric used in hardware selection be appropriate to apply for Virtual Machines. We are using VMware on pretty powerful DELL hardware, which is also hosting
120 existing VMs as of now. So my questions is would VM with 4 CPU's, 8GB of RAM, 80 GB Virtual Disk and 1 GBPs NIC would be handle the job?

Hi,
Thank you for posting in Windows Server Forum.
There is no any particular requirement to run RDS on physical or virtual machine. But if you want to install RD Virtulization role then you need to see that Hyper- V role installed because “when the RD Virtualization Host role service is installed, Server
Manager checks to see if Hyper-V is installed. If Hyper-V is not installed, Server Manager will install it”. And Hyper-V role cannot be installed on virtual machine so for that you need to install on Physical machine. Other all RDS role can be installed
on virtual machine also.
Install the Remote Desktop Virtualization Host Role Service
In addition, please check below articles.
1. Remote Desktop Services: Server and client requirements
2. RDS Hardware Sizing and Capacity Planning Guidance.
Hope it helps!
Thanks,
Dharmesh

Virtual Machine Manager lost the connection to the virtual machine App Controller 2012 R2

Hello there,
we have the following error message on our App Controller 2012 R2. When we connect to the machine the console will not start.
See KB2288932 http://support.microsoft.com/kb/2288932
and
https://social.technet.microsoft.com/Forums/en-US/1664700e-4cb7-4b36-b2b7-37d46d11ec00/missing-store-my-credentials-radio-button-in-app-controller-2012-sp1-means-kb2288932-no-use-and?forum=appcontroller
We do not see a radio button, and we do not want to modify the local policies on all client machines.
Any ideas?
Thanks in advance

Hi Marcus,
I'm not aware of any solution other than the one listed in the thread you referenced.
Regards
Richard
This posting is provided "AS IS" with no warranties, and confers no rights.

After installing Service Pack 2 in Vista, I've lost the pulldown menu in Tools Tab

Pulldown Menu under Tools is "half" missing

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Hyper V Manager can on longer manager all virtual machines

We have this issue have in few client of ours running 2012 or 2012 R2. From time to time those Hyper V base will lose the ability to manage all the virtual machines. There is nothing in Hyper V manager and you can't add itself into the management console.
Restart the hyper V manager service do nothing for it. the only way we can do is get into each each vms to shut them down and do a restart on the hyper V base OS. Those affected some are clustered some are just stand alone.
Lin Xiang Correct Solutions

Ive run into this issue on stand alone hyperv hosts and so far, one for one, it affects VMs associated with a virtual switch the management OS is excluded from. Determine which virtual switch the affected VM or VMs are associated with. Next, in
Virtual Switch Manager, highlight the correct virtual switch, then check to allow the Management OS to share the network adapter. Click Apply. The switch will briefly disconnect and reconnect. This appears to reset the switch and make the
vm accessible for management. After the issue is resolved, if needed, you can uncheck the box again to exclude the Mgmt OS from participating on the nic/virtual switch. I have not found documentation from MS to support this, but it has worked for
me on many occasions. Hopefully, MS will address this bug at some point.

Installing Adobe Document Services in SAP Virtual Machine Container

any plan to make available a new installation option for Adobe Document Services within an SAP Virtual Machine Container like IPC or Blue Ruby?
It would simplify so much SAP Landscapes increasing robustness in the same time.
Sergio

dreaming too much...

Connect Cloud Service with Virtual Machine

Hi,
Recently migrated my Website to one of Virtual Machine ( Windows 2008 R2 ). Migrated all my MySQl, tomccat, memcache and code.. Now if I hit localhost on Virtual Machine I can see website up and running.
But When tried to connect it from outside failed to do so.
Can someone help me to setup cloud service pointing to this virtual machine. Already setup access points etc pointing to this VM

Have you created an endpoint for HTTP? Sounds like that is what is missing...
http://azure.microsoft.com/en-us/documentation/articles/virtual-machines-set-up-endpoints/

Xfce4 applications lost its connection to display

Hi, I was using arch with xfce4 with no problem at all... but today xfce4 seems to have very strange problems...
As usual I logged in and give the startx command, well this time xfce starts loading but after this i've only a black screen with mouse pointer....
I thought it was an X server problem, but blackbox works fine... Then I discovered that xfce is running but not showing anything, if i tape ALT+F2 xfrun4 starts and I can start any applications I want (as the browser I'm using now) including xfce4 application like xfce4-panel or xfce4-session , that didn't start before as usual...
So the problem seems to be that the DE can't initialize it's services, but it sounds strange 'cause before I never had any problems, and I don't remember if I upgraded somethingh during laste working session...
Xorg log in /var/log seems to be useless, so I post my ~/.xsession-errors:
bash: no job control in this shell
/usr/bin/startxfce4: X server already running on display :0
/etc/xdg/xfce4/xinitrc: line 56: xscreensaver: command not found
Agent pid 5880
** Message: This build doesn't include support for XF86Misc extension
** Message: Querying Xkb extension
** Message: Xkb extension found
** Message: Querying Xkb extension
** Message: Xkb extension found
** (xfwm4:5892): WARNING **: The display does not support the XComposite extension.
** (xfwm4:5892): WARNING **: Compositing manager disabled.
(Thunar:5893): thunar-vfs-WARNING **: Impossibile connettersi al demone di HAL: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
(xfdesktop:5894): thunar-vfs-WARNING **: Impossibile connettersi al demone di HAL: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
The application 'Terminal' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.
The application 'xfce4-session' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.
The application 'xfwm4' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.
The application 'Thunar' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.
The application 'xfdesktop' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.
(xfce4-panel:5896): libxfcegui4-WARNING **: ICE I/O Error
(xfce4-panel:5896): libxfcegui4-WARNING **: Disconnected from session manager.
The application 'xfce4-panel' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.
The application 'xfce-mcs-manager' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.
alsa: Mixer attach default error: No such device
The application 'xfce4-menu-plugin' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.
Agent pid 5880 killed
Thanks for answers....
jacopo
Last edited by jtheripper (2007-09-17 15:21:26)

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Client Hyper-V "Cannot Connect to Virtual Machine"

I'm trying to run Client Hyper-V on my Windows 8 Pro machine. I was able to successfully install the service, and can create virtual machines and hard disks on my local system. I can even start them, and see boot activity via the preview window in the MMC.
I cannot, however, connect to any machines from the local system: when I do, it hangs on "Connecting to <machinename>" for 30 seconds before it pops up with the dialog:
"Cannot connect to virtual machine. Try to connect again. If the problem persists, contact your system administrator."
Obviously, because this is Client Hyper-V, I am the system administrator, so I scour the Internet to solve my problem. I see solutions related to firewalls, administrative permissions, a few other things, and nothing has worked. I also tried creating
a virtual machine on a Windows 8 Enterprise system (which can connect to it just fine) and export it for the Pro machine to import, and I still cannot connect to it, whether the VM is registered in place or copied to the host.
Some other notes:
- None of these systems has an OS installed - two locally created ones either had no boot or booted off a Linux LiveCD, and the exported one attempted to do a PXE boot. Thus, I cannot attempt to link via Remote Desktop since the computers have no names
- Hyper-V has some other quirks on my system as well: in order to stop a virtual machine, I have to end the vmwp process - which restarts the machine - and then stop it from the console within a few seconds. Otherwise, it hangs in the "Stopping"
state. In addition, none of the buttons on the side of the MMC work, but that occurs over all of MMC.
- No events show up in the Event log when a connection fails
- I am an admin on the Pro machine and have permissions to connect to machines and operate the management view

When you checked the event log’s what sources did you check?
Can you verify there are not any relevant error/warning events under the following sources:
Applications and Services Logs
Microsoft
Windows
Hyper-V-VMMS
Admin
Operational
Hyper-V-Worker
Admin
Operational
If not we should enable some additional logging if possible to see what is going on.
Shutdown any running VM’s
Close all of the Hyper-V UI
Stop the VMMS service (net stop vmms)
Enable Analytic logging for the VMMS and Worker Process (see below)
Enable UI Tracing for Hyper-V Manager and VMConnect (see below)
Start the VMMS service (net start vmms)
Open Hyper-V Manger
Restart the VM
Attempt to connect (try two or three times)
Gather Logs (see below)
Disable Tracing (see below)
Enabling Analytic Logging For the VMMS and Worker Process
Open the Event Viewer
From the menu bar select View -> Show Analytic and Debug Logs
Navigate to the Hyper-V logs and Enable the Analytic Channels
Applications and Services Logs
Microsoft
Windows
Hyper-V-VMMS
Analytic
Right Click -> Enable (yes if a pop up asks about enabling the logs)
Hyper-V-Worker
Analytic
Right Click -> Enable (yes if a pop up asks about enabling the logs)
Enabling UI Tracing
Create a new text file named “VMClientTrace.config” in the "%appdata%\Microsoft\Windows\Hyper-V\Client\1.0\” folder
Copy the following XML text into that file:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
    <Microsoft.Virtualization.Client.TraceConfigurationOptions>
        <setting name="TraceTagFormat" type="System.Int32">
            <value>3</value>
        </setting>
        <setting name="BrowserTraceLevel" type="System.Int32">
            <value>71</value>
        </setting>
        <setting name="VMConnectTraceLevel" type="System.Int32">
            <value>71</value>
        </setting>
    </Microsoft.Virtualization.Client.TraceConfigurationOptions>
</configuration>
Save the file.
Gathering The Logs
The Analytic logs will be in the analytic folder (you often have to refresh or select another source then analytic again to see them)
The UI trace Logs will be in %temp% (sometime back one directory i.e. %temp% = “C:\Users\taylorb\AppData\Local\Temp\2” for me but the logs are at “C:\Users\taylorb\AppData\Local\Temp”
Disabling Tracing
To disable Analytic Tracing just right click on the analytic sources and select disable (same as enabling)
To disable UI tracing just delete the “%appdata%\Microsoft\Windows\Hyper-V\Client\1.0\VMClientTrace.config” file.
-Taylor Brown
-Program Manager, Hyper-V
-http://blogs.msdn.com/taylorb

Cannot get Guest Services to Start on Virtual Domain Controller

I'm running System Center 2012 SP1 Version 3.1.6018.0
Guests all run Server 2008R2 SP1
I'm having a weird issue when trying to install guests services on a domain controller. On all of the virtual machines of the host, when trying to deploy the guest agent, it fails on all machines with the same error:
Error (2940)
VMM is unable to complete the requested file transfer. The connection to the HTTP server XXXXXXX could not be established.
Unknown error (0x80072ee2)
Recommended Action
Ensure that the HTTP service and/or the agent on the machine powstorehv1.gicw.org are installed and running and that a firewall is not blocking HTTP/HTTPS traffic on the configured port.
I have confirmed that there is no firewall blocking the process so in order to bypass this, I decided to just install the guest agent manually. This worked on all of the virtual machines on the host except for the one that is a Domain Controller.
At the point when it tries to start the service it gives me the following error:
Service 'Microsoft System Center Virtual Machine Manager Guest Agent' (ScvmmGuestService) failed to start. Verify that you have sufficient privileges to start system services.
I have tried with and without UAC enabled and I always run the MSI from an elevated command prompt. I've tried with and without MSIEXEC as well. I have Enterprise and Domain Admin privileges as well and have even tried with the domain administrator account.
At this point I'm not sure why I do not have sufficient privileges to start the service on a Domain Controller but I do understand that permissions are different due to its nature.
Any ideas around this either by installing through SCVMM or manually? Thank you in advance for your time!

After a very painful 10g (EE) installation process
i.e fixing all the following:<snip>
Sat Jul 17 11:40:19 2004
Errors in file
/Users/oracle/admin/db01/bdump/db01_mman_4039.trc:
ORA-07445: exception encountered: core dump [semop+8]
[SIGFPE] [Invalid floating point operation]
[0x41EDB3C] [] []
Sat Jul 17 11:40:21 2004
Errors in file
/Users/oracle/admin/db01/bdump/db01_pmon_4037.trc:
ORA-00822: MMAN process terminated with error
Sat Jul 17 11:40:21 2004
PMON: terminating instance due to error 822
Instance terminated by PMON, pid = 4037==============================================> Any idea on what needs to be done to fix this error.
I remember that i had the very same issue with the
Oracle 9i R2 Developers release.
Any help will be greatly appreciated.You mentioned the 9ir2 release. Do you still have any reference to the 9ir2 software in your environment ? With a little luck you have, and in that case it not so hard to find a solution ...
Ronald.
http://homepage.mac.com/ik_zelf/oracle

Virtual PC - Create new virtual machine snap in button not appearing

I was asked to move this question here so here it goes...
I have installed virtual PC and have the XP mode image working on Win 7 64 bit on a Dell Optiplex 990 i5. However when I choose the Windows Virtual PC manager and the Windows explorer window opens, I don't see the create virtual machine option, just
'burn' where it should be. How do I get the snap in option to appear to create a virtual drive? The window appears with the title Virtual Machines.
I have tried enabling the windows 7 aero UI thinking the classic windows appearance was somehow blocking this but that had no effect.
I tried re-installing the virtual pc setup directly from the website but it give me the message that it's isn't suitable for use. I tried un-installed and re-installing but get the same where the explorer window is missing the snap in.
Again, the XP mode image works properly and starts and shuts down without any issues.

Below is the fix for the virtual machines folder for WinVPC when the folder
here “%username%virtual machines” is missing the
“Create Virtual Machine” option.
Making changes to the Registry is potentially dangerous, always have a backup before proceeding.
The fix is pretty simple, copy and paste the following lines into notepad and save
to a *.reg file, then double-click to run it (you shouldn’t need to reboot for
the fix to take effect, close and re-open the window:
Windows Registry Editor Version 5.00
[-HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\BagMRU]
[-HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\Bags]
[-HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\BagMRU]
[-HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\Bags]
[-HKEY_CURRENT_USER\Software\Classes\Local
Settings\Software\Microsoft\Windows\Shell\BagMRU]
[-HKEY_CURRENT_USER\Software\Classes\Local
Settings\Software\Microsoft\Windows\Shell\Bags]

Visitor entitlements have disappeared in Web Logic Portal console

Hi all,
Please help! We have an issue whereby our users no longer have permission to access parts of our web application. Upon further investigation, when looking in the Portal console under visitor entitlements, we see the following message:
There are no visitor entitlement roles to display.
We have checked the portal database, and can see the roles are still in there, but aren't being retrieved by the application. We can also add new roles through the console, which are persisted in the database, but these too do not show in the console.
This had previously been working, and we are not sure what has changed.
Please advise what further information I can provide to help resolve this!
Kind regards,
Mike

Hi,
I was able to find a white paper which discusses this topic.
http://edocs.bea.com/wlp/docs81/whitepapers/vcr/index.html
If this isn't helpful, please post this question to the portal newsgroup at http://newsgroups.bea.com/bea/forum.jspa?forumID=2044
cheers
Raj

Internet won't let me sign into a service portal website

My Internet won't let me sign into a service portal website but let's me on the home page when I log in the writing just goes away and nothing happens

Are there issues with the service on other platforms?
Reboot ATV and router
Make sure DNS is set to automatic (settinga - general - network)
Try a reset (settinga - general - reset)
If it persists restore

Cant create replica and Hyper V virtual machine management service slow shutting down

Hi,
I cant create replica and Hyper V, I go through the process and all looks good it even starts to create the hard disk but it stops at 4096K and the wizard just keeps going.
The management console is also slow or wont load virtual machines - stuck on loading virtual machines
The Hyper V virtual machine management service slow shutting down over 30 minutes on re boot of Hyper V core 2012 R2
Any ideas ?

Hi Sir,
I assume that you have a standalone hyper-v server 2012R2 and you are using hyper-v manager to manage the hyper-v host .
Which system you are using to manage hyper-v host , win8 or win8.1 or other ?
Have you created VMs on the HOST ?
I would suggest you to create vhd or someother operation on hyper-v host directly to check the result .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Service Portal Console Displaying "Virtual Machine Manager lost the connection to the virutal machine"

Similar Messages

Maybe you are looking for