SERVICE pr AGAINST SERVICE SALES ORDER

Dear SAP GURU,
we have scenario service sales order has been raised for customer .
and some of the service will be done by through vendor
Kindly suggest what prerequisite has to be maintained for running full cycle in service sales order
what account assignment we should maintained  in PR.
is  sales order has to assigned in PR??
from my side,
service sales order created in qas server.
and during PR creaion try to maintain item category D and account assignment sales order
But maintaining  gl account  & sales order in account assignment tab
system shows message account require co object after maintaining sales order also in account assignment
Kindly suggest is any prequisite in sales order remain. from our side
Kindly help us
With regards,
Shrikant B.

Can you have a look in the following config to make sure doc.type -> item category assignment is exist for your PR?
SPRO>MM>Purchasing>PR>define Do. types.
Let me know, how it goes?

Similar Messages

  • Function Module available to get Stock lying against a Sale-Order

    Dear Sir,
    We have function module "KPKA_UTILS_PROJECT_STOCK_CHECK" for getting Stock lying against a WBS (Project Stock) .
    We are looking for a function module to get the Stock lying against a Sale-Order (Sale-Order plus it's Line Item) .
    We request SAP experts to kindly guide us about the availability of such Function Module please .
    We will award full points for the suggested solution pl .
    Rgds
    B Mittal

    Hi
    table MSKA - Sales Order Stock is availble whcih will give the Stock pertainig to a sales Order & line item.
    Hope this helps
    Thanks & Regards
    Kishore

  • How to resrve the stock to the customer against the sales order

    hi,
    sap gurus,
    good morning to all,
    how to reserve the stock to the customer against the sales order if this process is not MAKE TO
    ORDER SCENARIO.
    the prices of the products will be often changing drastically so
    he is following MAKE TO STOCK Process in his production process.
    so with out using m.t.o. process how to reserve it against the customer.
    for eg:
    in the market when the customer/dealer/stockist coems to know that prices are going to increase
    then obviously he tends to purchase in bulk quantities and reserve it in godown.
    so how to map that process.
    help me on this.
    regards,
    balaji.t
    09990019711

    Dear Balaji,
         This can be done By MM consultant through movement type. to move the stock from unresticted stock to customer stock.
    Regards,
    Sudhir

  • Block creation of multiple prod. order against single sales order in CO08

    Hi All,
    We have a requirement of blocking the creation of multiple production order against single sales order in CO08 if the production order is already created for that item.
    How to achieve this?
    SmanS

    Hi,
    you need to check if any user exit is there which will check order haeder table for the said sales order if any Prod Order exist for the same and flag custome error whicle prod order save.
    Pls revert if you need any further information.

  • PO against valuated sales order stock posting to consumption account

    Hi All,
    I am creating a PO with account assignment against valuated sales order stock. However the posting happens to consumption account (GBB) instead of the stock account (BSX). The following settings exist
    1. The material type is both quantity and value update
    2. The account assignment category used in PO is E which has special stock = E, account modifier = VKA and consumption posting = E
    3. The requirement class (in SD) has account assignment = E and valuation = M (even tried with A)
    4. The valuation class for valuated SO stock has been maintained in the accounting view
    However the system picks up the account corresponding to GBB-VKA and not BSX. Can anyone point out any setting that may be mising here.
    Regards,
    Ketan

    Hi,
      Maintain the consumption posting as blank against the account assignment used in PO in OME9 and test the scenario again.
    Regards,
    AKPT

  • Stop creation of reservations against the sales order

    Hi
    I have a situation here can any body help me out?
    For a single material there are two types of sales orders like export and local sales.
    Now as the sales orders are large enough and can deliver over the six month or more.
    This sales order creates large quantity reservation and due to this other sales order not confirmed although stock is available.
    Now we want to stop creation of reservations against the sales order as well as availability check in sales order (availably check may be able to by pass using item category).
    But we still want reservation against other production orders.(where the material as BOM component)

    Hi,
    check below options
    1. You can maintain Reason for rejection
    2.. you can maintain BN in sales order schedule line category
    Let's wait other experts to answer this
    Regards,
    Sankaran

  • Purchase orders manily against the sales orders

    My client do purchase orders manily against the sales orders... but to meet the minimumn purchase order quantity or value they club many sales orders in a single purchase order... now is there any way to track for what sales-order-item what purchase-order-item made?? (in SAP B1 2007 B PL7)

    Hi
    By Design ,SAP creates link between SO to PO when you create PO based on SO .
    Then you can use TargetDoc  which is PO  Number and can be seen in row level
    If it is disabled , you can enable it through form setting .
    I usually ask my user to start with SO . When they are ready to make purchase , they can click on purchase check box on SO and create PO based on SO . This way the link stay as B1design .
    The reason of this you can see the PO and (orrange arrow link) which can let you navigate your PO  from AR module .
    An other workaround  ,user defined field can be used at row level and manually link
    Hope this helps
    Bishal

  • Uploading Purchase Order Against the Sales Order through DTW

    Hi Experts,
    I searched the forum but could not see anything regarding this.
    Can I upload Purchase Orders against the Sales Orders using DTW upload facility? Manually we do it through the Logistics Tab in Sales Order.
    Thank you in advance.
    Kind Regards,
    IC

    Hi,
    You can use the BaseType, BaseEntry and BaseLine columns for this in the row level template (DLN1):
    BaseType: it's the Object Type of base document (ORDR.ObjType) which is '17' in case of Sales Order
    BaseEntry: it's the Document Entry of the base document (ORDR.DocEntry)
    BaseLine: it's the row number of the line in the base document (RDR1.LineNum)
    If you import your Delivery Notes with this info, the link to the Sales Order will be updated just as if you used Copy To in SAP.
    Regards,
    Nat

  • GR for order against a sale order, in MMBE

    Dear all Hi,
    I have made GR for order against a sale order, in MMBE X qty of stock is displayed as sale order stock, but when i check it for its reservation the system is not displaying the reference of sale order & also in MMBE screen it is sdisplaying sale order stock qty as X under unrestricted usebut correspondingly it not showing anything under Reserved column,
    Please help.
    thanks in advance.

    for material(say A) and plant combination In MMBE what you see is the stock against the sales order which is the result of GR with sales order as account assignment.
    Now reservation what you see in MMBE is the reservation made on material A by its parent matrials which my abe sales order account assigned or may not be assigned..\
    Hence these two are different meaning and consideration.
    please come back.

  • Steps to dispatch a Material against a Sale Order

    Dear Sir,
    We have created a Sale-Order . The Material to be dispatched is available in the Stock .
    Pl guide us as what steps are rqeuired to be followed to finally dispatch & Invoice this Material against the Sale Order .
    Also pl guide , the steps involved incase the Material is Exciseable and Excise Duty is also to be paid .
    We assure to give full points for the suggested solution pl .
    Regards
    B Mittal

    Dear Mittal
    Please follow the steps
    -  Go to VA02, input the sale order and execute.  There go to schedule line tab and see whether the stock is flowing under the tab Confirmed quantity.  If not do availability check and save.
    -  Go to VL01N, give shipping point, sale order reference and execute.  There click on Picking tab and input the quantity to be delivered in Picked Qty column.  Press Post Goods Issue on top.  Make a note of the delivery reference.
    -  Go to VF01 by default, the delivery reference will flow in your screen.  Press F8 and check whether the conditions are flowing correctly and if so, save the billing document and make a note of the billing reference.
    -  Go to J1IIN, click on From Billing here again by default the billing reference will flow; if not give the above billing reference and execute.  Save the document.
    The above steps are applicable whether the material is excisable or not.  The control is in J1ID.  If the material is excisable, you have to select Material and Chapter ID combination in J1ID and for that material, maintain 1 under the tab Declared.  If excise duty is not applicable, dont maintain any value there.
    thanks
    G. Lakshmipathi

  • Rare Problem in Delivery against a Sales Order

    Hi Experts,
    I am trying to make delivery against a Sale Order, but it is showing Only ZERO quantity available in this product.
    I have checked the quantity and no doubt that there is sufficient quantity avialable in the same plant, same storage location.
    No stock reservations have been maintained for that item.
    I also have checked that there are no Safety Stock maintained for that product in that plant.
    Waiting for your precious reply.
    Thanks & Regards
    Kuldeep Dahiya

    Hi Kuldeep,
    check the schedule lines and see is it a confirmed dates or not, if the schedule lines are not due system may give you the same message.
    once again check for the reservations of the stock in MD04 and confirm it.
    hope this will help u, if yes reward points.
    venkat cheedalla

  • Need help on IDoc for Picking, Packing and PGI against the Sale order

    Hi All,
    I am new to this IDoc stuffs. Below is the scenario for which I would like to know the details of the IDoc...
    Business Case:
    1. Storage location is a HU Managed but not WM managed.
    2. This storage locations is managed by a third party
    3. Outbound delivery document against the SO will be created by our personnels in SAP for this storage location.
    4. Picking, Packing and PGI needs to happen/post via Idoc. (By packing here, i refer to assign the HUs that are already created for the materials and is available in the storage location and not repacking)
    Is there any standard IDoc that can be used here to Pick, Pack and post PGI. We would like to have picking and packing in a first idoc and PGI on the second idoc.
    Thanks,
    Prashant

    Hi Typewriter,
    Thanks for your reply on this post..
    The business process is as below (it was changed recently to have the creation of OBD, pick HUS and then post GI via single IDOC)
    1. We have a storage loc in our enterprise structure that is HU managed but not WM managed.
    2. This storage loc is being maintained by a third party.
    3. SO will be created to be shipped out of this plant/sloc.
    3. The stocks at this storage loc will be Special stock "E" against the sales order. And the stocks will be Packed in HUs.
    4. The third party is informed to deliver the stocks (HUs - that do have the special stock number which internally refers to the the SO number and the line item number) directly to ship to party address in SO.
    5. The 3rd party will physically ship the HUs to customer and send in the details that they have shipped goods against the sales order.
    6. The details sent by the 3rd party will be received in SAP to create OBD for the sales order, Pick, Pack and post GI. This can happen via a single IDOC..
    I am now planning to create a custom IDOC type referring to the standard IDOC type DELVRY03 and message type DESADV and to use a custom BAPI/FM.
    Do you think I am using the right ones?
    Thanks,
    Prashant Kumar

  • Apply unapplied credit against future sales orders

    Hi,
    As per the current business scenario, there is a custom program which checks for the payment against the sales order and if it has not received, the program will put the order on Hold.
    Now, there are few scenarios where customer has paid the amount but later on, due to some reason, (either customer don't want the item or the item is out of stock) company decideds not to ship the item. Now, customer asks the company to keep the payment and utilize it for future sales order.
    Is there any standard feature available in R12.1 where I can find out unutilized credit against the customer and apply it to the future sales order?
    I can think of CUSTOMER ACCEPTANCE feature of Revenue Management in R12.1 but this is not solving the purpose 100%. Progress Workflow feature in Release Hold will simplify the releasing hold functionality but again actual problem will not get resolved.
    If any one can help me in this issue, it will be really great.
    With Regards,
    Vishal Majithia

    Not sure about R12, but in 11.5.10, you can create receipt for the customer and afterwards apply that receipt against any ar invoice of that customer.
    Hope it helps.
    Regards
    Varun

  • Automatic Service purchase requisiton from sales order

    Gurus,
    We have a business scenario where , service purchase requsition needs to be created automatically from a sales order.
    Could you please let us know whether anybody has worked on this scenario ?
    Kindly also suggest if any workaround can make this scenario possible ?
    Thanks & regards,
    Aditya
    For useful answers - Do not worry about reward points.

    You can enable it from schedule line category. In the configuration of Schedule line category fill the PR document type in the Order type field and click the P.req.del.sched checkbox on. Then , when  you create sales order, a PR will be automatically created.
    Reward if this helps.

  • Webdynpro ---- BAPI/FM used in service call to get sales order

    Hi
    I need to have a main view which contain an inputfield to insert a sales order, then check whether the sales order is existed in database, at last, pop up a message box to show the feedback.
    So which FM or BAPI shall I have to use during service call?
    Best Regards!
    Stephanie

    Hi,
    Use the BAPIs
    To create -
    BAPI_SALESORDER_CREATEFROMDAT2
    To change -
    BAPI_SALESORDER_CHANGE
    I assume that you are trying to create a sales order or You want to change the salesorder.
    For the sales order we need to write a selelct query on the check table for the existence of the sales order.
    Please try to use the SE37 Tcode to view all the BAPIs related to salesorder.
    Are you using WD for Java Or ABAP or BSP.
    Please a\let me know in case of  any issues.
    Regards
    Lekha

Maybe you are looking for