Service PR amount is noyt reduced after Service PO creation in CJI5 report

Dear Experts,
When user created Service PO with T-code ME21, Service PR amount is not reduced from CJI5 report & also increased budget in CJ30.
But when user create PO with T-code ME21N, Service PR commitment is getting reduced after Service PO creation in CJI5.
Please explain & propose solution.
Thanks & Regards,
Arvind

Hiiii...
Note that there is no difference between creation of purchase order via the t.code ME21 or ME21N...what might be your problem in increase of assigned values is because the buyer (purchase dept) is not referencing the purchase requisition at the time of creation of purchase order as a result of which the system is not reducing the purchase requisition committment.
Hope this helps....
Regards
Kaashif M

Similar Messages

Miro service tax amount is calculating wrongly for particular materials for import PO

Dear All,
I have created import PO with three vendors like foreign vendor, customs duty vendor & Clearing Agent vendor.
After creating PO with all conditions the PO is posted and MIGO is done.
While doing MIRO there is no problem for foreign vendor and customs duty vendor (there is no service tax applicable for both)
While doing MIRO for Clearing agent vendor, we have to calculate service tax for 12.36 %.
The service tax is properly maintained in the system and its calculating correctly for all other PO's except this PO.
This particular PO has 32 materials.the values are flowing correctly from PO to MIRO but while calculating service tax the tax value is higher than the exact value.
When we do MIRO for same clearing agent with different material the service tax is calculating correctly. But if we use particular materials with same clearing agent vendor the tax amount is not calculating correctly
For example:
for Item 10
The value is 1062.72 & 12.36 to be calculated on this value.
The actual tax value is 131.35 but in MIRO its showing as 171.90. The same problem is happening with all other 31 materials.
The Info record is not maintained for all the materials. On what basis should we check for the above issue. Kindly help with your valuable inputs.
Kindly refer the screenshot.
Thanks & Regards
Subbu

Hi Ajith,
Please find the screenshot below
But for same vendor with different material in another PO the tax is calculating correctly
9050* 12.36 = 1118. 58
For this the tax is exactly calculating as 1118.58
Regards
Subbu.

WBS - Error in Expected Costs after Service Receipt

Hi to all, we are working with SRM Server 4, sp9 using Extended Classic Scenario.
We've created a "PO ref. to contracts" and we've assigned costs to WBS budget.
All works fine because total value of PO has been added to "Commitment Line" (expected costs) of budget.
The problem comes out when we've made service receipt (from SRM) for the PO's amount. Service entry and GR entry have both been transferred to R/3 but WBS budget is wrong. Effective costs correctly contains GR's amount, Expected Costs still contain the GR value.
Making the same GR procedure (ML81) into R/3 system, problem below doesn't come out.
Following an example:
PO value: 100 - GR 100
Before Service GR: Expected 100 - Effective Cost 0
After Service GR: Expected 100 (even if it should be 0)- Effective Cost 100
Does anyone know why?
Regards,
Christian

So you tried to install jdev on your iPhone and got this error?
Come on help us to help you. Provide more info, check the forum sticky post 'read before posting'
Timo

Service entry amount is greater than PO amount

Hi all,
This is an example of the issue:
Service PO created with quantity 1 and price 1000.00. PO amount 1000.00
Service entry entered , quantity 1, amount 1000.00. GR amount 1000.00
Then PO changed, qty is 1000 and price 1. PO amount 1000.00
another Service entry is entered, quantity 999, amount 999.00. GR amount 999.00
After these 2 service entries, the PO quantity is 1000, price 1, PO amount 1000.00 and service entry amount of 1999.00
The invoices are received and no blocked for payment.
Any idea of what to do?
Regards,
CD

Hi,
Message M8 -081( for quantities invoiced greater than goods receipt quantity) is set as E (error) in OMRM & OBMSG t.codes.
Please check again in your system,1st try in sandbox,then do in DEV client & transport TR and then test in testing client.
Also try setting error messages for SE-363 & SE-781 in following path:
SPRO- >Material Management->External Services Management->Define Attributes of System Messages
After check & setting all, go for fresh transactions.
Regards,
Biju K

How to deduct my Penalty amount in Sales order (Customer Service)

Hi All,
We have a Service contract to bill the customer monthly based on the usage of our Equipment. It has three components.
1. Usage no. of units produced during the month of Billing @ Rs.100 / unit
2. Bonus amount on stoppage hours due to Customers (lack of input or power)@ Rs.300 / Hr
3. Penalty amount on stoppage due to Service provider (lack of spares or Service Engineers) @ Rs.200 / Hr
We created a Service contract with three Service materials (line items) with agreed rate as Condition value.
Daily we recording the reading above 3 parameters using Measuring point of the Equipment. We have a report to get monthly total of Productivity, Stoppage due to Customer, Stoppage due to Supplier.
We are thinking to create a Sales order every month (will copy the rate from contract) and enter the readings (manually) in the Quantiy field.
If I enter the Condition value -200 for third parameter (Penalty), system accepts and reflected in Sales order too.
Request to verify my flow and correct me If I am wrong.
Other solutions are also welcome.
Thanks in Advance,
Babu

Any thoughts?...
Babu

Automatic creation InternalOrder inECC after Service Order creation in CRM

Hi,
After Service Order creation in CRM, the automatic creation of Internal Order in ECC not happening, needs to be do the related settings. Can anybody share the stepts for the same to do the settings.
rgds,
balu

Hello balu,
Have you released all items?
Also,please make sure that against the item category "Assign BW/CO" is set to Service.
Hope this helps!
Thanks and Best Regards,
Shanthala Kudva.

WLAN AutoConfig Service crashes 3 or 4 times after you first login after rebooting?

Hi,
My lenovo came with windows vista - I upgraded to 7 when I got a chance. I have W7 Professional. I have all the Lenovo drivers installed except access connections. I don't like the tool. Anyways, Windows manages my wireless adapter. I have the weirdest issue -- right after I login after rebooting, the service "WLAN AutoConfig" crashes 3 or 4 times in sucession any time something tries to access the net. If you restart it enough times, it eventually stays up and never crashes again until you reboot. Also, the fancy aeropeek stuff crashes too. The task bar becomes non-transparent. That eventually recovers as well.
I have another t61 thru my work running w7 and it doesn't have this issue. The difference between the two of them is mainly that it has the intel based wifi card instead of the atheros based one.
In the event log, I see:
The Windows Audio Endpoint Builder service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 120000 milliseconds: Restart the service.
The HomeGroup Listener service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The Network Connections service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 100 milliseconds: Restart the service.
The Program Compatibility Assistant Service service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The Superfetch service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The Remote Desktop Services UserMode Port Redirector service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The WLAN AutoConfig service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
then I see this later after a bunch of them have restarted
The Offline Files service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 300000 milliseconds: Restart the service.
The HomeGroup Listener service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The Network Connections service terminated unexpectedly. It has done this 3 time(s).
The Program Compatibility Assistant Service service terminated unexpectedly. It has done this 3 time(s).
The Superfetch service terminated unexpectedly. It has done this 3 time(s).
The Distributed Link Tracking Client service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 300000 milliseconds: Restart the service.
The Remote Desktop Services UserMode Port Redirector service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The Desktop Window Manager Session Manager service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 300000 milliseconds: Restart the service.
The WLAN AutoConfig service terminated unexpectedly. It has done this 3 time(s).
The Portable Device Enumerator Service service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 300000 milliseconds: Restart the service.
The Windows Driver Foundation - User-mode Driver Framework service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 300000 milliseconds: Restart the service.
Has anybody encountered this? If so, did you find a fix?

Also, I noticed this thread on Microsoft's site -- should I try disabling ipv6?
http://social.answers.microsoft.com/Forums/en-US/w7network/thread/c9605d54-7d4d-4e8c-83ae-4d3d287df2...
I don't use it anyways.

Problem in assign after service callout

Hello,
I'm using OSB 11 g. I have a problem with assign after a service callout.
The XML returned after the service callout is listed below -
<S:Body xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
<getCreditRatingResponse xmlns:ns2="http://www.alsb.com/order/" xmlns="http://www.alsb.com/">
<return>750</return>
</getCreditRatingResponse>
</S:Body>
I have created a separate stage with an assign for storing the return value (750) into the variable creditRating, and both of the following statements are not working (unable to see assigned $creditRating in the trace)
1. $soapResponseBody/alsb:return/text()
2. fn:data($soapResponseBody/alsb:return)
There are no namespace issues. Request help in this regard and thanking you in advance.
Regards
Shyam.V

Hi
I too ran in the same issue.
The reponse which i get after service callout is
added $soapResponseBody
<S:Body xmlns:S="http://www.w3.org/2003/05/soap-envelope">
<ns2:getCreditRatingResponse xmlns:ns2="urn:BasicOrderMgr" xmlns="http://www.example.org">
<ns2:return>750</ns2:return>
</ns2:getCreditRatingResponse>
</S:Body>
and the service callout is followed by an assign where i use the following to assign the variable creditRating
$soapResponseBody/getCreditRatingResponse/return/text()
and also tried fn:data($soapResponseBody/*:return) {there is no namespace prefix declaration}
Please help as i am stuck when i try using the creditRating variable in next route node.

HT5594 After updating to iOS7 on my iPhone4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

After updating to iOS7 on my iPhone 4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

I finally just resolved this after not being able to enable location services since upagrading to iOS 7. Posting the solution here 'cause I couldn't find it anywhere else.
I enabled Restrictions under Settings > General > Restrictions and created a passcode (I'm not sure if this was part of the solution, but it wasn't enabled for me by default.)
In Restrictions, under Privacy, Location Services was set to "Allow Changes" (This still didn't solve the issue of the greyed-out Location Services switch though - I still couldn't turn it on.)
Also in Restrictions, I also switched "Find My Friends" to "Allow Changes"
Once I did step 3, the switch under Settings > Privacy > Location Services was no longer greyed out and could be switched on.
Hope this helps!

Calculate credit amount based on a sub service order?

Hi Experts,
How do I calculate credit amount based on a sub service order? Is that in the COEP table? If yes what is the logic to calculate it? suppose I have sub service order number 000006009972. Thanks!
Best regards,
- Anthony -

Anthony
It might help if you decribe the business process...
PeteA

I can't configure elan touchpad after service

Hi!
My laptop is G580, i7. OS: Windows 8.1.
After service (touchpad change), I can't configure the new one. I tried with different drivers - installing and uninstalling - nothing has change. "Options" in "ELAN" tab doesn't work.... When I start programs in Elantech folder, I change the settings, but it doesn't affect touchpad. Please, help!
Link to image 1
Link to image 2
Link to image 3
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums
Solved!
Go to Solution.

1) Uninstall the ELAN Touchpad driver from the Control Panel
2) Reboot your system
3) Install this driver
http://support.lenovo.com/de/de/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g500s-n...
4) Test the options

Best practise for external service when amount is not sure

Hi friends ,
What could be the best practise from the PM side when we want to send an equipment for external repair
and the service cost is not sure .
Also if we will create only service PR and not PO then there could be some legal problems while sending the equipment outside.
What I am thinking is to create a service PR -> PO and then setting the actual cost while invoicing .
Is it fine ?
We would prefer if we can take some print out of the external service mentioning following data through standard SAP :
1) Vendor Name
2) Our Co name .
3) Address from where the equipment is dispatched
4) Address where equipment is to be sent .
5) Contact No .
6) some Dates
Any suggestions.
Regards
AM
Edited by: Amehra on Jul 7, 2011 1:53 PM

Hi,
it is not necessary to enter the exact amount for external service in PM order ,
exact amount must be confirmed during service entry sheet ml81n
or it also be adjusted during miro ( invoicing )
and for prininting , most of the part as u said are covered in standard printing of Maintenance order, PR and PO
otherwise there must be customized PO printing in ur organisation that can be change if ur requirements does not meet
Regards,
Jitender

Apart from the lock button problem in iphone 5 the display brightness suddenly goes blank and becomes normal after locking and unlocking the iphone. The Apple service centre in India is denying to service the iphone as it was purchase in USA even thoug it

Apart from the lock button problem in iphone 5 the display brightness suddenly goes blank and becomes normal after locking and unlocking the iphone. The Apple service centre in India is denying to service the iphone as it was purchase in USA even though the iphone is in warranty.

iPhones do not have an international warranty. Warranty is valid only for the country of purchase. This is most likely because different countries require different iPhone models. Not reasonable to expect all countries to maintain stock for all models.

IQ770 crashed after service pack 1 automatic update.

after service pack one was downloaded ,while on line i would get kicked off.eventually windows wouldnt boot up,and then received a blue screen with an error message saying windows has shut down to prevent further damage to the computer.then the computer would only boot up in safe mode.i tried system restore in safe mode,but it did not work.i called hp technical support. they told me i need to do a system recovery.i tried a system recovery through the hard drive, it went through the whole process,and i thought it was going to work,but when it was time for windows to boot up the computer froze.the tech said i need to purchase a recovery cd and it should work.i ordered it and i followed the directions and ran the cd.when the disc was complete the screen was white,and there was no response of any kind.then after a few hours i shut the computer off.when i turned it back on there was nothing but a screen with vertical colored lines,and no response.i have had the computer for 14 months when this happened.i don't know what to do? has this happened to anyone els?

hi, ive got almost the same problem. I just haven't followed through on the back-up as far as you have. good thing, it looks like. I've almost filled my hard drive, now going on 19mos later. i wish i could help. my video is fine, i think. ive ran every free malware, virus, defender and anti spyware prog i could find for this. and got rid of a lot of supposed threats. but the problems get worse and worse. lately i cant get my hardware to work right. seems one thing after another one piece or another seems to go out. weird thing is: the drivers say they are totally updated just for some reason not working and needs to go online but wireless and ethernet both have "hardware connection errors" so i cant get the sucker online. then my system speakers are out. ive tried uninstalling, disabnling, updating via sd card and hp and microsofts sites (all the trials and errors not necessarily in chronological order) but i dont know what to do. winlogon shuts off, oembios shuts off, now i look over and windows explorer keeps going out aaaaaaarrrrrrgh, i dont have that much money to get new warranty. <text deleted> since i cant get online with mine its not up to me when i can check my email. but if someone wants to try and troubleshoot this with me via messenger if im on or email id really appreciate it. im at a loss cuz im normaly the it tech to go to for vista, but now im lost and would really appreciate any and all info or idea...even if ive tried it, maybe my sequencing was off and im willing to retry ....thanks
Message Edited by WendyM on 08-24-2009 08:13 AM

MY phone is using large amounts of data, when i then go to system services, it s my mapping services thats causing it. what are mapping services and how do i swithch them off. i really need help.

MY phone is using large amounts of data, when i then go to system services, it s my mapping services thats causing it. what are mapping services and how do i swithch them off. i really need help.

I Have the same problem, I switched off location services, maps in data, whatever else maps could be involved in nd then just last nite it chewed 100mb... I'm also on vodacom so I'm seeing a pattern here somehow. Siri was switched on however so I switched it off now nd will see what happens. but I'm gonna go into both apple and vodacom this afternoon because this must be sorted out its a serious issue we have on our hands and some uproar needs to be made against those responsible!

Service PR amount is noyt reduced after Service PO creation in CJI5 report

Similar Messages

Maybe you are looking for