Service PR currency change

Hi,
I want to change currency of service Purchase Requisition already created and saved with USD currency.
Is it possible in standard SAP? System allows me to change currency of material PR but not service PR.
Please help.
Regards,

Hi,
This is due to the system behaviour, it is SAP Standard that you are
not able to maintain this field for service requisitions (Item Catergory
'D'). It should not be possible to change the currency in purchase
requisitions as purchase requisitions are internal documents and the
currency in these documents should be the company code currency.
Moreover you do not specify a vendor in these documents so a document
currency is not necessary.
It is possible to change the currency in the header of the PO that is
created in reference to a purchase requisition (item category 'D'), if
some preconditions are fulfilled.
Regards,
Ashwini.

Similar Messages

Currency change 'as requested'... without my knowl...

Hi,
I just received an email, and a message on my skype saying that my currency had been changed from £GBP to Euro 'as requested'
However I do not use any of the paid features of skype, and I certainly did not request any changes to my account.
I know of course there can't be anything to worry about since I have no linked up Skype with an of my payment details. But I'n Curious as to what could have caused this?
thanks
Luke

Firstly, please check if that email is a real message from Skype. Here are some suggestions on how to know if the email you received is really from Skype or a fake one -
https://support.skype.com/en/faq/FA330/how-do-i-know-that-an-email-is-really-from-skype
Then if the email is a real message from Skype (or if you were not able to distinguish if it's a fake or real one), you may need to contact customer service for clarifications. Just open the link pasted below to see the instructions on how to get in touch with customer service -
https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service
An immediate change of password is also advisable as a safety net.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

Service account password change

Hi.
we have ADFS 3.0 ( 1 server, not a farm ) with groupmanaged service account. All Works fine. Now - i see on DC, on one moment that password for this object has been changed.
Description:
An attempt was made to reset an
account's password. Subject: Security ID: NT AUTHORITY\SYSTEM Account Name:
DC1$ Account Domain: DOMAIN Logon ID: 0x3e7 Target Account: Security ID:
DOMAIN\First_gMSA$ Account Name: First_gMSA$ Account Domain: DOMAIN
. And about ~40 min later login via ADFS to third party saas stopped to work.
In security log on ADFS server following events started to show up.
An account failed to log on.
Subject:
Security ID: DOMAIN\First_gMSA$
Account Name: First_gMSA$
Account Domain: DOMAIN
Logon ID: 0x872CA
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name:
Account Domain:
Failure Information:
Failure Reason: An Error occured during Logon.
Status: 0xC000018D
ADFS service runs under this account and after restarting service all was fine again.
Error code should be - STATUS_TRUSTED_RELATIONSHIP_FAILURE
So - the question is - HOW should service proceed password change or should any additional configurations performed ( which are missed by me.

Try this: "STATUS_TRUSTED_RELATIONSHIP_FAILURE" error when you log on to Office 365 from AD FS proxy in Windows
https://support.microsoft.com/en-us/kb/3032590
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Service Request disappears from the list of My Service Requests after changing status to In process

Service Request disappears from the list of My Service Requests after changing status to In process
Incident manager (resp.) > Agent Dashboard

Hi,
As far as I know, this is a new feedback, Please vote this customer voice, here is the link:
http://feedback.azure.com/forums/216926-service-bus/suggestions/6062851-batching-in-rest-api, or create a new voice at azure feedback forum:
http://feedback.azure.com/forums/34192--general-feedback
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

BEx Analyzer (7.x): currency change when new formula created

Hi All,
I have a strange one. Query is executed in BEx analyzer. A new formula is created outside the query results window using excel functionality, and the currency changes from USD to DM.
Example query results:
Cell A1: Var 1 = $150.00
Cell B1: Var 2 = $160.00
Cell C1: Var 3 = $70.00
New formula created using excel functionality: =sum(A1+B1) displays as 310.00 DM
The language settings have been checked for the operating system and for SAP (user data) and they appear to be correct. Is there another setting to be checked?
Thanks,
Pam

sap said it was working as designed. suggested we look at regional settings on laptop and make a workbook template with us settings.

Company code currency change over

Dear all,
Want to know information about company code currency changes.
Our company code currency is SGD and now want to change to USD.
Our fiscal year is Jan-Dec and we are in SAP 5.0 version.
Can you let us know whether itu2019s possible to do the change?
If so, how and can we perform this activity in the middle of the year.
How to take care of the open items like PO,SO,Vendor ,Customer, which we have already posted in the system with our SGD currency.
And if not, do suggest and alternate/workaround.
Heard about, that this can be achieved with PARALLEL CURRENCY activation.
Not having much idea about Parallel Currency.
Do suggest.
Regards,

Hi,
A change of the company code currency is possible. The change is only possible as at year end (the actual running of the programms can be done mid-year provided certain customising has been done prior to the first posting in that year).
All items will get changed from old local currency to new local currency.
You can read the documentation in Spro > Cross-Application Components > EMU > Local Currency Changeover.
This is a very complex procedure so be sure to read all the documentatin first.
Kind regards

Service Desk and Change Request Config document

Hi SolMan Experts,
Could you please help in getting Service Desk and Change Request Management Configuration document please !!!
Thanks in advance.
- Ignacio.

Hi,
Please get the stuff from the following sites.
1. http://help.sap.com/ -> SAP NetWeaver -> SAP Solution Manager
2. http://service.sap.com/solutionmanager
3. use tcode SPRO--> search for service desk and follow the steps.
4. use tcode SPRO--> search for Change Request management and follow the steps
Regards,
Srini Nookala

Contextual Event - "Currency Change Event" not raised?

Hey,
I am trying to raise contextual event on a table when I click on a row. The event type for a table is eventType="Currency Change Event" But is not working.
Here is the event in the PageDef file.
<events xmlns="http://xmlns.oracle.com/adfm/contextualEvent">
<event name="paramValueChangedEvent"
customPayLoad="${bindings.PolicyId.inputValue}"
eventType="Currency Change Event"/>
</events>
After that I want to raise custom method:
<methodAction id="testEvent" InstanceName="myBean.dataProvider"
DataControl="myBean" RequiresUpdateModel="true"
Action="invokeMethod" MethodName="testEvent"
IsViewObjectMethod="false"/>
Here is the event map:
<eventMap xmlns="http://xmlns.oracle.com/adfm/contextualEvent">
<event name="paramValueChangedEvent">
<producer region="*">
<consumer region="" handler="testEvent" handleCondition=""/>
</producer>
</event>
</eventMap>
When I raise the event programmatically, then the event is raised and my function is called.
Here is the code. I call this function on a custom selection listener of the table.
public void riseCurrencyChangeEvent(String treeID, String nodeID,
String attributeValuedPassedName) {
DCBindingContainer bc = ADFFacesUtils.getDCBindingContainer();
FacesCtrlHierBinding tbl =
(FacesCtrlHierBinding)bc.findCtrlBinding(treeID);
FacesCtrlHierNodeBinding node =
(FacesCtrlHierNodeBinding)bc.findCtrlBinding(nodeID);
EventDispatcher dispatcher = bc.getEventDispatcher();
node = (FacesCtrlHierNodeBinding)tbl.getRootNodeBinding();
dispatcher.queueEvent(node.getEventProducer(),
node.getCurrentRow().getAttribute(attributeValuedPassedName));
bc.getEventDispatcher().processContextualEvents();
My idea is not to call custom method after clicking on a table row, but I want to raise declaratively the event because I will need so generics.

Hi,
there is a bug 10045872 filed for this. The bug is scheduled for fixing in PS4 (11.1.1.5) I'll work on a manual - though code centric - alternative for the time being and publish it on ADF Code Corner when done.
Frank

Contextual Event question (Currency Change Event)

Hello,
I have published a contextual event on my table (Currency Change Event)
I also have a SelectionListener on the same table.
Will I have to manually/programmatically publish the event within the selection listener code? (and if so, how?)
The reason I ask is that I practiced with a small app containing a region from an ADF library that handled currency change event from the referenced task flow and everything was great, but now I am trying to apply the same principles to my "proper" application and there is no currency change event being received in the parent application.
I had a look at Andrejus example (http://andrejusb.blogspot.co.uk/2010/10/contextual-events-framework-and-adf-11g.html) but he has hand crafted the events on the page binding will I have to do that too? Is it not enough that I have the currency change event declared?
Any help appreciated, thanks
JDeveloper 11.1.2.2

I've applied the same processing to another table that uses the standard collectionModel.makeCurrent selection listener and it's firing the contextual event handler in the parent application, so that almost confirms that it's the bespoke selection listener that needs code adding to it to invoke the currency change event
edit :
I added this code to invoke the makeCurrent and everything is ok again, thanks for listening
FacesContext fc = FacesContext.getCurrentInstance();
ELContext elContext = fc.getELContext();
ExpressionFactory ef =
fc.getApplication().getExpressionFactory();
MethodExpression meth = ef.createMethodExpression(elContext, "#{bindings.partnersVO1.collectionModel.makeCurrent}", Object.class, new Class[]{SelectionEvent.class});
meth.invoke(elContext, new Object[]{selectionEvent});

Nokia prime place in the service can not change th...

nokia prime place in the service can not change the company's address. How can this be possible???? I received a reply from Nokia that I need to first go to here.com, look for my company and my company COMPLETELY removed. Then, to create a company AGAIN!? And wait 2-6 WEEKS backup postcards so I can verify the company that it appears Nokia's map service!! **bleep**??! Again, what's the point? Companies are changing in the same way as people exchange phone numbers!

I manage to fix it
by format my iPhone (General -> Erase All Content and Settings) and restore from backup.
After the restore the name was updated to my real name.
! don't forgget to do a backup for all your apps data and your photos !

Currency change for Employee group level

Hi Guru's,
I am configuring Currency for all the Employee groups 1,2,3,4,etc.i am trying it in V_T510F_B,Can any one confirm if this is right or is there any way to configure the currency for all the employee group in one table ..
Regards,
Reddy

Hi,
Their is a currency change going on so now we are changeing the existing currency to EUR,so our requirment is that all the EG & ESG should get the currency EUR instead of the earlier one "JOD",
All the EG & ESG will have same currency EUR.
But after our finance team has changed the currency in Company code level still i can see the old currency .
Regards,
Reddy

[BC4J] Master currency change + dirty details = warning (how?)

Sorry for the lame subject, but it's the best I could do. :)
Anyway, I 'want' something, but I could use some advice on how to accomplish it. Here's what I've been trying to realise:
- A simple master-detail scenario
- One of the detail records has been altered
- The master currency changes
- A popup comes up to warns me to either commit or rollback pending changes
And
- One of the master records has been altered
- The master currency changes
- Nothing happens
I hope this explains what I need. :) So far I've created a new CustomViewObjectImpl class which I use as a base for all my ViewObjects. In this new class I override the executeQueryForCollection() method, because if I'm not mistaken, this is the location where the check for dirty details should be performed.
However, a simple call to getDBTransaction().isDirty() is too simplistic, too unspecific.
I think I somehow need to end up with a ViewRowSetIterator instance (which has the isDirty() method) which is contained or derived from one of the detailRowSets of "this". Any ideas of how I can retrieve it?
So far, I've got something like this:
protected void executeQueryForCollection(Object qc,
 Object[] params,
 int noUserParams)
RowSet[] details = getDetailRowSets();
ViewRowSetIteratorImpl vrsi;
for (int i = 0; i < details.length; i++)
vrsi = ....; // how to retrieve it ?
if (vrsi.isDirty())
 switch (JOptionPane.showConfirmDialog(null,
 "Save changes?",
 "Attention",
 JOptionPane.YES_NO_OPTION,
 JOptionPane.WARNING_MESSAGE))
 case JOptionPane.YES_OPTION:
 getDBTransaction().commit();
 break;
 default:
 getDBTransaction().rollback();
 break;
super.executeQueryForCollection(qc, params, noUserParams);
}

Hi,
I had a quite similar need, except the "Nothing happens" part on altered master.
I realize this makes quite a difference, but maybe my solution could help you somehow.
After trying several possibilities, I considered the following approach.
1. I extended ViewRowImpl in MyViewRowImpl and wrote the following:
 private boolean areDetailsModified()
 String[] viewLinks = getViewObject().getViewLinkNames();
 for( int i = 0; i < viewLinks.length; i++ )
 ViewLink viewLink = getApplicationModule().findViewLink( viewLinks[ i ] );
 ViewObject detailView = viewLink.getDestination();
 Row linkRow = null;
 if( detailView.isExecuted() )
 linkRow = detailView.getCurrentRow();
 if( linkRow != null && viewLink.getSource() == getViewObject() &&
 linkRow instanceof MyViewRowImpl &&
 ( (MyViewRowImpl)linkRow ).getViewRowState() != Entity.STATUS_UNMODIFIED )
 return true;
 return false;
 * Assume a view row creates/updates/removes its main entity.
 * If the row itself was not modified, checks for changes in details.
 public byte getViewRowState()
 Entity entity = getEntity( 0 );
 switch( entity.getEntityState() )
 case Entity.STATUS_INITIALIZED:
 case Entity.STATUS_NEW:
 return Entity.STATUS_NEW;
 case Entity.STATUS_MODIFIED:
 return Entity.STATUS_MODIFIED;
 case Entity.STATUS_UNMODIFIED:
 if( !entity.isValid() || areDetailsModified() )
 return Entity.STATUS_MODIFIED;
 break;
 return Entity.STATUS_UNMODIFIED;
 }2. In my JClient client (still to use for the UIX one), I installed a JUPanelValidationListener and implemented
 public void beforeCurrencyChange( JUPanelValidationEvent event )
 Row row = event.getIteratorBinding().getCurrentRow();
 int rowState = Entity.STATUS_MODIFIED;
 if( row instanceof MyViewRow )
 rowState = ( (MyViewRow)row ).getViewRowState();
 }3. And yes, not so fancy, I also made some changes to trace a "user-dirty" transaction (for some insert vs. LOV issues)...
Greetings,
Adrian

11g: Contextual Events - How do I fire them on currency change?

Hi!
After posting a question here: 11g: Bounded task flows, need help and advice!
I read the article at http://technology.amis.nl/blog/3365/adf-11g-how-events-in-one-region-cause-other-regions-to-refresh because I need to refresh region B when the user selects in region A.
Now, the comments in that article suggest that Contextual Events are the built-in mechanism for that use case. So I tried that first. The online help suggests that this is what I need.
I read the online help and created an event and defined a producer and consumer in the event map in the parent page's page def. Now the help shows how to fire the event when a methodAction binding is executed. But I need to fire the event when the user selects a row in region A's table.
1. How do I do that? Where do I put the event? The help says it's possible, but does not show how. Add a selection listener to the backing bean and call the event-enabled methodAction binding from there? Or is there a better way?
2. I get the impression, that - when I use the event to call the consumer's binding ExecuteWithParams method - just the query of the consumer's VO is executed. That's great. But how do I reset the flow to the initial action? Just refreshing the VO is not enough. I need to reset the flow to the initial action (showing a view).
I read http://www.oracle.com/technology/products/jdev/tips/fnimphius/taskflow_in_popup/taskflow_in_popup.html and now I am completely confused. Use input parameters or use events? If I use events, how do I reset (refresh) the task flows?
Thanks,
Sascha
Edited by: Sascha Herrmann on Oct 19, 2008 3:33 PM

Sascha,
are region A and B share the same transaction ? If yes and the content in region B is a dependency of the VO used in A then you don't need contextual events at all. So if i assume that region A contains a list of departments and region B the employee table (where DepartmentsVO is the parent of EmployeeVO) then you can do as follows
- navigate to the region definition of region B in the pageDef file
- use the right mouse context menu to add parameters, and then a parameter (e.g. changeIndicator)
- wire the changeIndicator parameter to the DepartmentsVOIter current row key str (its a method exposed directly on the iterator)
- set the region binding refresh to ifNeeded
- set a partial trigger on the regionB to point to the departmentTable so the region is refreshed whenever the table row currency changes
The parameter that you added just does nothing except that it indicates to the region binding that the region must refresh. You point it to the row row key of the department iterator because it provides the changed value.
If VO in regionB is not dependent on the DepartmentVO, then you need to create a parameter on the bounded taskflow, which takes the value of changeIndicator to write it to pageFlowScope.currRowKey. Then create a set currentRowWithKey method as a default activity and wire it up to pageFlowScope.currRowKey
Frank

Currency changes rates through TBEX from excel file getting erro

Hi,
When i am trying to upload the currency changes rates through TBEX from excel file getting error message:
Error "The macro 'ThisWorkbook.TableBackToR3' cannot be f" occurred during macro execution
Kindly guide what macro i need to define in excel sheet. or should i need to activate something in excel sheet relates to macros.
Regards,
Salil...

When you call it the first time, it new Shell() constructs a new Display for you (the default).
The second time, it gets the default display, but you are in a different Thread now. Since you have to create your widgets in the UI thread, it gives you that error.
To run code in the UI thread, Display provides two methods:
display.syncexec(..)and
display.asyncexec(...)see
http://help.eclipse.org/help32/index.jsp?topic=/org.eclipse.platform.doc.isv/guide/swt_threading.htm
for more details.

VK12 - Currency Change

Hi all,
I am figuring out on how to perform a large change on Currency from USD to GBP. Apparently, I have got all the currency in USD for each material number when I execute the following:
1) Run Transaction VK12.
2) Condition Type = PR00 (Price).
3) Key Combination = Price list/Material.
4) Price List = 01 or 02 (Standard or Distributor, any one).
5) Notice that all the material's currency is in USD (no matter Price List = 01 or 02 from point 4).
Base on the above, is there any way to perform the large change, as I have a list of materials (more than 10,000 materials) with condition (PR00/01 and PR00/02 only) and with the new price in GBP for each materials.
By the way, is the above relates to IMG configuration, or it is ABAP oriented? Any advice is much appreciated.
Cheers,
Patrick

HI Patrick
As far as i know the currency change cannot be done via transaction VK12. We have to create the condition record again to replace/overwrite the existing one.
For this i advice,
1. Extract whole sets of condition records.
2. Re-upload them with new currency.
Kind Regards
Eswar

Service PR currency change

Similar Messages

Maybe you are looking for