Service PR generated through maintenance order

Hi Friends,
I am creating a maintenance order in which i am using external services(Control key PM03).
The PR is getting generated, but delivery date in the PR is not editable or modifiable its greyed out.
How to make the field editable.
please advise
Thanks in advance
Vivek
Edited by: vivek mankad on Jan 27, 2009 5:05 AM

Hi Friends,
We have solved the problem using the user Exit. If you want to change the delivery date in the PR generated through maintenance only option is through user exit. Even if you use user exit the field will not be modifiable. What we did was we created a new field where we maintain the delivery date and used the user exit COZF0001 to pick the date from the field. Now whatever date is entered in that field will be displayed in the PR.
Thanks a lot guys.
Vivek

Similar Messages

  • Multiple doc type setting for service PR generated from Maintenance order

    Hi Gurus,
    My client has multiple company code and has different document type for PR and PO as per the company code. For generating the  service PR  from maintenance order system take the document type of PR defined in the config.
    Is it possible to define multiple document type for service PR depend on the company code/ Plant level?
    Kindly help.
    Regards
    DP

    Hi Ravi,
    I used the User Exit COZF0001 .  Since we can assign only one PR doc type in the config .
    I have assigned one PR doc type in configuration which will work for a company code and all their respective plant. So in this case user exit wont do any job for changing the doc type.
    You will defined a condition in the User exit saying that if  company code /plant which you get it from maintenance order is not same (Config )  then provide the  PR doc type which you want to create for respect plant or company code.
    I dont have coding right now with me. You need a small coding to be done to create the separate PR doc type in EBAN-BSART
    with respect to plant . Check in your configuration at what point of time you are creating the PR either in saving or release of MO. You can take the even to activate the User exit.
    Consult your ABAPer  they can do in 10 min.
    DP

  • Creation of Sub Contracting PO through Maintenance Order

    Dear All,
    I am aware of the sub contracting indicator to be cliked in the maintenance order in order for the system to generate a Sub Contracting PO through Maintenance Order. However I am unable to see this indicator in maintenance order fields.
    Is there anything that I am missing in customising settings or is this related to activation of any business function sets.
    I am working in ECC 6.0 EhP 5.0.
    Need your help / inputs so as to resolve my issue.
    Thanks in advance.
    JK

    Hi Tehsin,
    Thanks for ur response. 
    However this is something I am aware of. The settings suggested by you will automatically generate a PR with Account Assignemnt Category as 'Order' (F) & Item Category as 'Service' (D) combination.
    I am looking for the auto generation of PR through the maintenance order with Account Assignemnt Category as 'Order' (F) & Item Category as 'Sub Contracting' (L) combination.
    Looking forward to hear from all.
    Thanks in advance
    JK.

  • PR type generated by maintenance orders

    Hi Gurus,
    Where do you defined the type of purchase requisition generated by maintenance order ? Is it possible to have different types of PR depending on the material type of the component in the maintenance order ?
    Cheers
    Olivier

    Hi,
    You can define the PR type at following IMG point:
    - Plant Maintenance and Customer Service
      - Maintenance and Service Processing
       - Maintenance and Service Orders
         - General Data
           - Define Account Assignment Cat. and Document Type for Purchase Requisitions
    The value is usually set to NB but this can be different. Only one value can be defined for PM orders.
    To get varying document types consider exits COZF0001/COZF0002 and adjust the field BSART.
    -Paul

  • Reg - Subcontracting through Maintenance Order

    Scenario :Sending a Equipment through Maintenance Order outside for repair, whotrat are the steps need to follow
    I have the following doubts
    1. For Example, Motor for Service
    Motor is the returnable component and Bearing Is a spare parts needed to repair the motor, I have to send both motor & bearing to vendor. I will only get  motor back from service, bearing is consumed during repair.
    1.How to send Motor & Bearing......whats the mov type ?
    2. what are the key fileds i need to set in the Material master for both the material
    3. Howthe cost is taken care for the consumed spare (Bearing)
    4. How to track the stock at vendor stock
    Regards
    Prakash.B

    It is suggestable to use refurbishment process.
    You may check with the movement type 541 for GI of the material (equipment), you can mention the bearing in the components tab and consume it against the order.  You have to create an external service requirement through the order using PM03 control key in the Operation Tab.
    The cost is captured as below:
    1. Material Consumption - w.r.t GI - to the order
    2. Vendor payment - w.r.t Service entry sheet - to the order.
    Hence the total amount is captured against the maintenance order.
    Then settle the order as required.
    Praveen

  • Services for Object in Maintenance order can not link

    Hello,
    "Services for object" in Maintenance Order can not link to share point.
    Linking documents from the C drive or Global drive is successful but if SHAREPOINT is used, it fails
    When trying to link to a Word document on our Sharepoint... It fails... when I'm in an order... it gives me an error... (displayed on the attached Word file...) and when I'm working within a document... (CVN02) it merely links to my C:\ drive which won't work...  
    We need to link to our "master" Sharepoint (web based) documents.
    Please suggest the solution.
    Thanks
    Regards
    Anil

    Anil,
      Couldn't you add the web address as the attachment?
    Regards
    Narasimhan

  • Generation of k type PR  and service through maintenance order

    dear all,
    i require help from all of you , how i can book service and  k type purchase requition  cost on the maitntenance order.
    raghav

    Hi,
        You can buy non stock material of Item Category N via MO , PR will get generated and u can create PO for that PR and receive the material ..
    If the Non stock material does not have a material master record, In Component Tab - you can still enter description , quantity -units of purchase , purchasing details with vendor and generate PR accordingly ..
    If the Non stock material has material master record you can enter that manually , else create an eqpt BOM or material BOM - mention this non stock material in that and use the BOM [ going to component Tab -selecting List option at bottom] while creating Maintenance Order on tht eqpt ..
    We can maintain only PR of one type for Maintenance Order ..we generally use PR NB Type as per config settings spro ->PM->Maintenance and service orders ->General data ->Define Account Assignment and document type for PRs ..
    If u want to have separate PR type for non stock component procurement then u can try via user exit COZF0002 Change purchase req. for externally procured component..i am not sure wht u mean by part code here ..
    regrds
    pushpa

  • Creation and selection of Notification types through Maintenance order

    All,
    When i  create a notification through the order, while giving the notification type in F4 selection, only i could able to see S1,S2 &S3 notification types. Neither i could see the other standard notification types nor the custom notification types configured in the selection. Also we didnt include any notification types in the personal list in selection.
    Can somebody throw ideas about this behaviour ?
    Regards,
    Suresh.

    Hi Riyaj,
    Thanks for your input.
    The custom notification types have been configured for the notification category 01 which is maintenance notification. But the order type through which the notification i am creating is activated with service profile.
    I guess, this could be the reason, if it is, is it any other way to bring the custom notification types as mentioned above ?

  • PR not in table generate with maintenance order

    Hi gurus,
    I have a problem about maintenance order service external generate to PR(Purchase Requisition)
    on External Tab. service Number already insert but material Group, Recipient, Purch. Group is blank and saved. so PR Number auto generate. but,  i was check PR is not in table, like below.
    Generate PR is done but cannot be updated, because in table EBAN is empty.
    where is PR number ?
    thank u,
    SaifudinHajar

    Hi Sundar,
    the order already released,
    i means why PR is generated but in table EBAN, is empty?
    thanks,
    Hajar

  • Query related to Service Entry Sheet for maintenance order

    Dear Gurus,
    I am little bit confusing while entering SES for maintenance order,
    Do we need to enter both Maintenance Order# & Cost Center# in Account assignment tab of SES?
    What is impact of entering both in SES?
    What is standard procedure of accepting services for maint order?
    Thanks in advance.
    Regards,
    Amol.

    Hi Amol
    Why you created Framework Order ?.. You can not change account assignment category in service entry sheet..e.g. K-Cost Center.. F- Order
    But depending upon settings, you can change account assignment values such order 1 to order 2
    If there are requirement that SES can created for  Account assignment F or K. I recommend you to use following approach
    1. Create a Contract - ME31K with AAC as U- Unknown (If business already have rates negoiated with vendor for services)
    2. Create release order with reference to contract and system will prompt you to enter AAC- it can be K or F
    3. Perform SES w.r.t to Release Order.
    Other Approach can but not strong one.. create two line items in the PO. one with K and Other with F.. then choose the line item at time of SES creation that business want to book the cost on CC or Order.
    Thanks,
    Jagdeep

  • Creation of subcontracting PR through maintenance order

    Dear experts,
    Can anyone tell me how to create the automatic subcontracting pr from the maintenance order.
    my requirement is to send the defective item from the maintenance to external vendor.
    how to see the subcontract  check box in the maintenanc order screen.  what is the settings i ve to do.
    when i try to check the MPI INDICATORS, i m not able to edit .
    please guide me how to get the solution that for this subcontracting external process. 
    i m using the control key as PM02 IN THE operation tab page.
    do i ve to send that material as non valuated material ?
    what are all the steps to be covered.     can you guide me step by step
    thanks and regards
    vinoth devapriyan

    Hi Vinoth,
    SAP supports Sub-contracting from Maintenance Order from EHP 5. If you are using EHP 5, then you have an 'Check Box' option in the Refurbishment Order Type to define sub-contracting is allowed. Then you can send a Defective Material & get back a Repaired Material.
    If you are working on a EHP that is less than 5, then you have do the sub-contracting flow seperately. Following are the steps.
    Create a Sub-Contracting PR. While creating the PR, you need to define 'Recursive BOM'. Here the Parent material will be with Valuation Type 'Defective' & child Material will be with Valuation Type 'Repaired'.
    Create a PO. Issue the Material (defective) from ME2O against movement type 541 to the Vendor.
    Post GR with Movement Type 101.
    Now the Material will get into stock against Valuation Type 'Repaired'.
    Note : Do not provide 'Account Assignment' as Maintenance Order (or) Cost Center in the PO. It should be blank. Other wise the Order will be debitted twice (once when consuming the material & second when posting GR).
    Hope this helps.
    Regards,
    Ajai

  • Deletion of Reservation item generated from Maintenance Order

    We have a peculiar problem.
    In Production system, weu2019ve close Maintenance Order that has a component reservation. When closing the Maintenance Order, the reservation has been set deletion flag but two components are not being marked for deletion.
    We only have two reservations on Production system with this situation, on any other cases the reservation takes the deletion flag when closing the Maintenance Order.
    What could be the problem?

    Hi,
    Check whether you have done good issue for that component .
    whenever you do Teco open resurvation will cancelled.
    Regards,
    vinit

  • Service PR through maintenance order

    Hi Friends,
    I am trying to create a mintenance order, with operation control key as PM03. for this we get a window where we maintain purchasing organisation and othe rdata. in this pop up window the currency field is not editable. Where do i set field settings for this. Kindly help me
    Warm Regards
    Vivek

    Hi Vivek,
    That Currency setting is maintained by the FI person for the County. It cannot be changed for each Order.
    That will be default for your Country.
    If you are gving a service contract out of the Country with another Currency that can be taken care during Purchase Order by the MM person based on the Vendor.
    At Order level you cannot change it & should not also. If the setting itself is wrong, just tell your FI guy.
    Regards,
    MLN Prasad

  • Delivery Address is greyed out in PRs generated through Sales Orders

    Hi Experts,
    I have an issue in PR Delivery Address.  When I am generating a PR automatically from the sales order with custom Schedule Line Category and Custom Item Category, the PR is generated with a particular Doct Type and AAC, as per the settings in VOV6.  But when I go to ME52N, the delivery address is greyed out and I am not able to change the same.  When I am converting the PR to PO, there I am able to change the delivery address.  But my requirement is to change it at PR level itself.
    Is there any setting to make the Delivery Address as Edit mode? 
    Thanks in advance.
    Hari Raj

    Hi,
    Since the 4.6 releases, there is a design change about the address
    processing for third-party orders in reference to SD-orders.
    System is working correctly, it is designed this way.
    The reason for this behaviour is to prevent any possible inconsistency
    between MM and SD applicable applications. Changing the address must
    take place in the sales order.
    The way to change the delivery address in a PR linked to a Sales Order
    is to change the Ship-To address in the sales order.

  • Table control View in Maintenance order Services tab

    Hi Experts,
    I am trying to change the table control fields of the services tab of the maintenance order , when we use PM03 control key to generate services PR.
    I try to remove some check box which are earlier defined as invisible to make it visible. However after saving the system variant system doesnt take the changes. It is coming back to the original .
    Here are couple of fields I would like to change the setting. As of now I am trying to change the below mentioned field to visible . Presently it is in invisible mode.
    Fields
    Formula::ESLL-FORMELNR,
    Form values: ESLL-FRMVAL1 to ESLL-FRMVAL5 and
    User field3:  ESLL-USERF1_TXT
    program name SAPLMLSP
    Control TC_VIEW
    I am following the below. Kindly let me know whether I am following the right step.
    1) Click on tbale setting
    2) CLick on administrator
    3) Select the field and do the necessary change to make visible or invisible.
    4)Activate
    5)Close
    6) save.
    RG
    Vinod
    Edited by: vnodpm on Feb 6, 2012 7:07 PM

    Hi,
    The IMG customizing will have greater priority than the screen table controls (also specific program logic can supersede the table controls). Check the customizing for service screen at following path:
    SPRO - Materials Management - External Services Management - Define Screen Layout
    -Paul

Maybe you are looking for