Service Profiles Migration between Server M2 and M3

Hi Cisco Top Guns!!!
I have tried to migrate some service profiles between servers M2 (with M81KR) to M3 (with Vic 1240 and Vic 1280) and Windows 2008 R2 recognized the interfaces on M3 as new interfaces.
The ghost devices interfaces (old interfaces) still presents on Windows and to rename the new interfaces or apply the same IP configurations, I need to remove the ghosts interrfaces.
On my opinion, this change goes against the UCS philosophy.
I have a case opened with Cisco Developed Team and now Im sharing this issue with the community. Anyone have benn passed for this problem too?
Regards,
Fábio Henrique Teixeira - System ITS

This is a hardware change to the operating system. While UCSM can abstract the MAC/WWPN/WWNN information, the operating system recognizes a hardware adapter difference and will instatiate new devices. This is an OS issue. Some OS's (Linux) will allow you to set a flag to ignore the hardware change. I'm not aware of whether and what versions of Windows that will allow the same behavor. We cannot modfy the hardware identification change, as we use it within UCSM to manage allowable firmware bundles and adapter polices (vnics/vhbas/fabric failover)

Similar Messages

I'm a Dropbox user and I migrate between my iMac and a Toshiba notebook. Is there Apple software that will work on the notebook allowing me to open Pages, Numbers or Keynote documents that I've placed in Dropbox?

I'm a Dropbox user and I migrate between my iMac and a Toshiba notebook. Anyone know if there is Apple software that will work on the Toshiba that will allow me to open Pages, Numbers or Keynote documents when I access them in Dropbox?
Maybe I should just always export from Pages into Word (and likewise for the other types) before I upload to Dropbox? I hope not!!

If you don't want to export files and consider the Microsoft formats to be your basic working format, then you need to consider either using MsOffice for Mac or LibreOffice instead of the iWork suite.
You could always run a virtualised OSX on the Toshiba, but I don't think Apple will appreciate me telling you how to do that.
Peter

How can we do the data migration between Oracle Applications and SAP R/3.

Hi All,
How can we do the data migration between Oracle Applications and SAP R/3 system.What are all the possible ways to move bulk data from Oracle Apps to SAP r/3 system.
Provide any 3rd party tools which supports data migration and also pls rpovide the SAP's own data migration tools with supports the above feature.
Awaiting for best possible solution.
Thanks in advance.
Regards
Dharmaraju

the 3rd party tool is ETL , you can use ETL tool and the prepare the load files then you can use LSMW method to upload the data to SAP.

How to do data migration between single node and multi node HANA systems ?

Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ?

Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ?

Microsoft Intune Service update planned between July 22 and July 30

Microsoft Intune Service update planned between July 22 and July 30
We will be releasing the next service update for Microsoft Intune between July 22 and July 30. This Intune service update will deliver behind-the-scenes enhancements, allowing us to continue providing you with a high quality product experience. New product features will not be included as part of this service update.
To see the specific timeframe for when your tenant will be updated, please visit the Microsoft Intune status page. You can identify the Service Instance that your Intune subscription is running on by opening your Intune administration console, clicking on the Admin tab and then selecting View Service Status. Your Service Instance will be displayed at the top of this page.
Additional resources:Visit the what’s new in Intune page on TechNetSubmit feedback and...
This topic first appeared in the Spiceworks Community

Good morning ranatlas,
We were able to resolve the issues you had with your service. We did do some extensive troubleshooting to isolate the slow speed issue. Please let us know if you have any more questions or concerns here on the forums. You were a pleasure to work with and our team wishes you a great day.
Thanks again,
Rachel_VZ

Migration between ISOCORS directory and vendor supported directory

How can we migrate between ISOCORS directory and vendor supported directory?

You can use a few products, such as iPlanet Meta Directory, or ISOCOR Meta
Directory. These provide 2 way synch between diff LDAP products. Or, you can go
to http://mozilla.org and write some scripts to do this yourself, using PERLdap.
--Will
Vijay Patil wrote:
How can we migrate between ISOCORS directory and vendor supported directory?

Can't auto decommission and move service profile to new server

When blade hardware is fail service profile will move to new server in server pool. but before service profile move to new server ,administrator must approve by click Decommission link in server pool configuration. If i tested by click Decommission in Server Maintennance Menu it work fine but tested by Unmount Blade Server ,Unmount HDD ,Power button don't work service profile don't move to new server.
I need automatic decommission function and how i config it?
When service profile move to new server if blade hardware fail?

Thank you for answer.
I has open TAC and then answer from Cisco support is no auto decommission in UCSM.
I think is Weakness of cisco ucs system.
UCS Develop team can you provide simple script auto decommission for me and another customer ?

Porblem migrating the profile file between Windows XP and Windows 7 64 bit

I have purchased a new Windows 7 64 bit computer. My old computer was a 32 bit Windows XP. I cannot get the new computer's Firefox version 18 to read the profile data from my old XP computer. I have renamed the old profile file to the correct name for the new computer but none of the bookmarks, passwords, add-ons etc. appear in my new computers Firefox. The correct profile file is being accessed by the new computer as I can see the modification time etc is changing when using windows explorer. Is the new computer being a 64 bit the problem or is there some way that I can get the old profile migration to work or do I just have to start again from scratch?
Will I have a similar problem with Thunderbird?

It is better to only copy the files that you need from the old profile to the current Firefox Profile Folder to avoid issues and you also need the profiles.ini files in such a case.
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Terminal Server profiles path between Server 2008

My existing Citrix farm has published desktops on Server 2008 x86 SP1, and the new farm I'm building is based on Server 2008 R2 x64. I can't get the x64 servers to use the same path as the x86 servers, despite having the same GPO's.
Both have the same GPO linked: under Computer Configuration/Policies/Administrative Templates/Windows Components/Remote Desktop Session Host/Profiles, the path is set to \\server\share\%username%.
When a user who doesn't have a profile logs in to a Server 2008 x86 server, after they log out their profile is uploaded to the share as \\server\share\username.V2. When a user logs into Server 2008 R2, it doesn't pull their username.V2 profile and instead
creates a new one as \\server\share\username\username.domain.V2.
Please help me get the x64 R2 servers to use the existing TS profiles.

Hi,
Thank you for posting in Windows Server Forum.
Set up RD Session Host roaming profile path
Roaming profiles should be configured separately for each RD session farm. They should not be shared between farms or user’s physical desktops since profile corruption and data loss may occur if a user is simultaneously logged into two machines that load the
same user profile.
Configure the following Group Policy on the RD Session Host:
Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Profiles ->
Set path for Remote Desktop Services Roaming Profiles
Kindly go through beneath article for information.
User Profiles on Windows Server 2008 R2 Remote Desktop Services
http://blogs.msdn.com/b/rds/archive/2009/06/02/user-profiles-on-windows-server-2008-r2-remote-desktop-services.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Are there any differences between Server 2012 and Server 2012 R2 that might impact TFS or SQL server required for TFS?

Hi,
In the interest of just getting started and learning the basics of setting up TFS, I previously setup an IDE using a large workstation running Windows 8. I set up the required servers for TFS using VM's through Hyper-V. I am now transferring
everything to a new and separate physical server.
My question stems from a problem I had when I originally setup the TFS system the 1st time. I couldn't get SQL server to work using the Server 2012 R2 download from the subscription center. When I used Server 2012, it worked, so I proceeded that
way just to get going.
So now I'm setting things up anew on a new physical box, I want to ask up front, is there some difference in the R2 version that causes problems with either TFS or SQL server, or was there likely some oversight on my part when I did things the 1st time?
As an addendum to my question, I always assumed R2 merely means the Server software has progressed to a refined state and is ready for wide distribution and easy setup. I assumed that there are no differences between the Standard version and the R2
version. Is that understanding correct?
Thanks.

Hi Daniel,
Thanks for your response. That's a great link. I don't recall seeing a page that is so clear and easy to read back when I was doing this the 1st time, but I probably just missed it. That helps.
I am/was using TFS2013 and VS2013. As I recall, my problem was getting SQL Server to work, but I thought asking this question on this forum was wiser because I figured everyone using TFS would be well familiar with these issues.
At any rate, it seems as though TFS2013 is fine with Server 2012 standard or R2.
I was using SQL Server 2012, and it also seems as though it works on R2:
https://msdn.microsoft.com/en-us/library/ms143506(v=sql.110).aspx
Anyway, thanks for your support. I'll be trying this again and we'll see.

Stopping sql server services while applying Service pack On SQL server 2008 and 2008 R2

Hi,
I am planning to apply service pack 3 for SQL 2008 R2 and Service pack 4 for SQL server 2008. This is my first time and I am applying first QA and DEV environment. I have one confusion. In cluster once you fail over sql resources to active node all of the
sql services including SQLSERVER and Agent are automatically stopped in passive node where we apply service pack. But in Stand alone, The services are not automatically stopped. Do I need to manually stop those services like SQLSERVER, Agent, Browser
and others if any before I start applying service pack?
Early Response is highly appreciated.
Thanks In Advance

Hello,
You don’t need to stop SQL Server services. Let SQL Server setup do it as needed.
Please read the following article for the cluster you would like to update:
https://support.microsoft.com/kb/958734?wa=wsignin1.0
The following article may be useful too:
http://www.sqlcoffee.com/Tips0014.htm
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Relation between server's and runtime Data Model?

I am working on a project utilizing the MVC architecture.
After some doubts, I decided to create one DataModel class for each table of the server's normalized database and create the necessary relations at runtime and not in SQL prior to download.
The database is only a few MB and I need the flexibility.
I would appreciate some links to theoretical material regarding the relation between the runtime and the server's DB data model.
Thanks,
David

Hi Anirudh/Deepa,
As You said first I have created Outbound Connection Pool for DB adapter and given eis/DB/HRDBDataSource as JNDI name. It asked to save the file Plan.xml and i saved it in Oracle_soa1/Soa/Plan.xml
Next I created datasorce with JNDI name jdbc/HRDBDataSource and provided all credentials.
For AQ also i created connectionpool with JNDI name eis/AQ/MyAQ . Here also it asked to save the Plan.xml and Isaved it in Oracle_soa1/Soa/applications/Plan.xml
In Jdev while configuring AQ adapter I have selected the database [for this only i created connection pool and datasource] and given the JNDI Name as eis/AQ/MyAQ . (I tried with and without giving datasorce value jdbc/HRDBDataSource in AQ adapter )
Still I am getting the below error.
*Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Enqueue' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. Queue:EnQueue [ Enqueue_ptt::Enqueue(EMP_MESSAGE_TYPE) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: No suitable driver found for . ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. No suitable driver found for 0*
Please guide me
Regards
PavanKumar.M

Migrating between server pools

Is it possible to move a vm between server pools? Im am trying move a clone vm from one server pool to another server pool...
Im getting the following error: Server Pool: ServerPool has no compatible servers for the clone of ....
Any resaon why i mite be getting that error?
Is it possible to present a repository to multiple server pools?

Exactly how are you trying to do this. Are you choosing to clone and then running the clone customizer to map your storage and vnics?

Is there a way to have separate permissions between Server app and Profile manager?

I'm running OS X 10.10.1 (Yosemite) with Server app 4.0 installed.
I am a System Administrator for a University. I want to give our college techs the ability to manage Profile Manager, but if I grant them Admin rights on the Apple server they will also have access to the Server app, if they have the server app installed on their computer.
Is there a way to limit access to the Server app, but allow certain individuals admin right to Profile Manager?

This provides instructions:
How to use multiple iPods, iPads, or iPhones with one computer

Colour Profile issues between North America and Europe

I have a corporate colour, C80M80Y0K0 which creates a very attractive shade of purple. Within North America all printouts demonstrate very similar variations of that purple colour. We have an office in UK that uses the same collateral pieces. While they preview correctly on screen, they are unable to reproduce that purple in their office or with their professional suppliers (all digital processes). The resultant colour is blue (approx C92M68Y18K0).
The files are created in Indesign, using a process colour within Indesign, and then exported to a PDF and shared with the UK office.
My guess is that it is a colour profile issue - has anyone else had this same issue, and if it is indeed a colour profile issue, what profile would you recommend using? I've tried using some of the other default profiles within Indesign but with no luck.
Any assistance would be really appreciated.

The resultant colour is blue (approx C92M68Y18K0).
What preset are you using for the Export, or what are the Output settings? Have you tried PDF/X?
PDF/X-4 will leave color unchanged and profile everything, so a color change like you are describing most likely means the wrong output profile is being used in the UK.
PDF/X-1a forces everything into your doc's CMYK space and makes conversions at output less likely—with X-1a your 80|80|0|0 mix will probably be output unchanged.

Service Profiles Migration between Server M2 and M3

Similar Messages

Maybe you are looking for