Service Provider and costs incurred
Hey Guys
My playbook arrives this week, Ive read a few article's about MTN not supporting playbook? Although the articles do seem to be a bit outdated (2011). i went onto the MTN website and couldnt find any further information on the subject, infact there is no reference to playbook on their website @ all?
Will MTN allow me to bridge the playbook to my existing contract? Vodacom seems to be the preferred playbook provider but that would mean a 2nd contract...
Also, what are the costs involved in video messenging playbook to playbook, if connected to my cellphone account? Will i be charged over and above my monthly contract bill, or does it fall within the 'upcapped data package' that blackberry users currently enjoy?
Id appreciate your assistance.
Thanks
Is there nobody in Sun looking at the Java plugin? I opened a bug report with this and that fell into some abyss. It has been several months and I have seen no response from Sun. Nobody with any knowledge seems to be monitoring plugin forums here or on java.net.
Has Sun abandoned support for the Java plugin?
Similar Messages
-
I cannot receive email properly on either my IPad or my IPhone. I have had them for over a year and they have always worked fine. Until three days ago, when they both started acting up. On the IPad, when I open mail, it says it is downloading about 1,700 emails. At the very end, which takes quite a while to get to, I finally get the most recent ones. The IPad is sending emails just fine.
On my IPhone, when I open mail, it says it is downloading 100 emails, but it doesn't do that. And it gives me no new emails at all. The IPhone is sending email just fine.
I have already deleted the email accounts on both devices and reinstalled them. I've contacted the Internet service provider and verified all the right settings. The Outlook email on my desktop is working perfectly.WMV is a heavily-compressed format/CODEC, and the processing time will depend on several factors:
Your CPU, which is not that powerful in your case
Your I/O sub-system, which is likely a single HDD on your laptop
The source footage. What is your source footage?
Any Effects added to that footage. Do you have any Effects?
Each of those will have an impact on the time required.
The trial has only one main limitation - the watermark. Now, there are some components, that have to be activated, but are not with the trial, but they would be evident with Import of your source footage, if it's an issue.
Good luck,
Hunt -
Today while I was at work my phone was stolen. After unsuccessfully trying to track down the kids who had it, I called my service provider and asked them to suspend my account. A short time later, I found my phone at a local pawn shop and called to reactivate my phone's service. The woman on the phone said that it should only take a few minutes to reactivate. However, a coworker also told me that whenever a theft gets reported to the service provider, apple puts your phone's serial number on a list that disables yours phone's re-enactment until the service provider confirms that the phone has been found. I'm not sure if this is true, but my phone should have been working a few hours ago, and it still says that there is no SIM everytime I try to send a message. Should I just wait it out or is it more likely to be at the fault of my service provider?
Thanks!The SIM question/issue is separate from all of the others. Your iPhone will not access the cellular newtwork until you install a new SIM. The current SIM has been deactivated and is now useless. Get a new SIM, install it (or have it installed), then have your carrier grant the iPhone access to the cellualr network.
-
i phones updated iso 8.01 all three phones will not connect to service provider and touch id
will not work APPLE HELP !!!!!!!!!
anyone know i fix as i have spent over 2000 pound on three phones that won't work
all three where working fine until the 8.01 updateApple just pulled the update because it is a major fubar! You will have to rollback your iPhone to the base iOS 8 using iTunes and Apple needs to seriously test its patches!
Update:
Simply connect your phone to iTunes and back up your data. Then, click the “Restore iPhone” button and follow the on-screen instructions. It’s a huge pain, but at least it’s better than having your shiny new iPhone turned into a big expensive iPod touch. -
I have changed by service provider and have a new number which i use on Iphone 5. The number shown on Facetime and Imessage is still the old one. How do i update it
Deregister your old phone from here if you regsitered it
https://supportprofile.apple.com -
I no longer have a service provider and my SIM is locked. How do I obtain my PUK?
I no longer have a service provider and my SIM is locked. How do I obtain my PUK?
if you don't have a carrier then the sim card and punk code is irrelevant and you will not be able to use it
the only purpose of the sim card is to tie the phone to the carrier, and the puk code is a security code for the sim card
trow away the sim card and when you get a new carrier you will be given a new sim card by that carrier -
I recently changed my internet service provider and my e mail address. I updated my iTunes account with the new e mail. Now I cannot get updates on my devices, because the login box on each device still contains my old e mail, and I do not know how to change this How can I change this please?
Try tapping on the id in Settings > iTunes & App Stores on your devices (Settings > Store if they aren't on iOS 6+) and then log back in and see if that 'refreshes' the account on them.
-
I NEED MY UNBLOCKING CODE FOR MY IPHONE 4S ,I HAVE BEEN INCONTACT WITH MY SERVICE PROVIDER AND THEY CONFIRMED THEY HAVE SENT AN EMAIL TO YOURSELF TO GET THE CODE AND NOW I NEED TO CONTACT YOU MYSELF IS THIS CORRECT AS VODAFONE DO NOT SEEM TO BE HELPING ME
There is no such thing as an unlock code for an iPhone. It's done by restoring the phone using iTunes
-
I have iPad 2 and recently changed my Internet Service Provider and email address. When I switch on the iPad I am asked for my password for
my previous providerwhich when entered is not acceptable. I am told to create a new passord but this only changes the password for my current
address. I am now unable to access iPad and I need to know how to circumvent this.Roger, thank you. I wish I had sent out this question a month ago, when I committed the folly of creating another apple id with my alternate email address. Since then, I had realized that I didn't seem to need it, hence today's post.
So now what do I do? Is there anyway to delete that unecessary apple id?
And it is even worse than that...the secondary address listed currently in our apple id is a mobile me one that my husband created, but never uses, never checks, and probably doesn't even remember the password for. -
Since updating to iOS 6 my phone has not been receiving text messages from some people. Already contacted my service provider and apparently nothing's wrong on their end. Any suggestions?
Who's your service provider?
-
Private Expenses with Service Provider and Automatic Assignment
Hi,
I have created Private Expense Type in Create Travel Expense Types for Individual Receipts.
In TRIP- Travel Expense Report when I try to split credit card transaction in TRIP, with the wizard, I see that system is throwing errors, that Private Expenses not assigned to any Service Provider, example- AX (AMEX).
1. Do I have to assign AX as service provider in Assign Wage Types to Travel Expense Types for Individual Receipts
2. Do I have to assign Private Expense type during splitting of Private expenses in Private Expense Wizard? I see there is a list of expense types in the drop down in Priv Expense Wizard. Cant system determine automatically the Private Expense Type ?
Please suggest.Dear Vijay,
1. Do I have to assign AX as service provider in Assign Wage Types to Travel Expense Types for Individual Receipts
If you maintain Service provider in "Assignment of Credit Card Transact.to Travel Expense Type", then yes you have assigned it as well in wage type assignment. In Wizart you try split or change assignment of another expense type and it seems it by pass it together with Service Provider assignment.
Unfortunately for the second question I will be not able to answer.
But you can check for all expense types you use for AMEX card transaction in "Travel Expense Types for Receipt" in bottom, there you set "Allow Wizard for this Expense Type" assign your Private expense type.
SAP Help documentation for this field:
Expense Type for Private Shares
The receipt wizard uses this expense type to record the personal portion of an expense. This is required, in particular, when a receipt amount paid by credit card includes personal portions. In some cases, the company can be liable for such personal receipts. Therefore, they need to be recorded even when they are not reimbursed.
Use
In the view "Create Travel Expense Types for Individual Receipts", you need to mark the expense type in this field as "private costs; no reimbursement to employee."
Example
Your employer has received, and paid, a hotel bill for EUR 450. The bill lists the cost of EUR 400 for the hotel room, and the cost of EUR 50 for personal expenditures.
The best way to record this with the receipt wizard is to enter the expense type for private receipts in the "Expense Type for Private Share" field, in addition to the expense type HOTL. Also, to be able to run the receipt wizard for expense type HOTL, you need to select the "Allow Wizard for This Expense Type" indicator. -
I am living and working here in the sultanate of Oman. Its been two days that I have not been able to use viber on my iPhone unless I use VPN. I talked to colleagues who have iPhones and other apple devices and they said they are also experiencing the same problem. I tried to call up my service provider (NAWRAS) and they informed me that the problem is not on their side, that they have not blocked the app. Surprisingly, when I asked my colleagues using samsung, they said the app is working just fine. What seems to be the problem? Are the codecs (I hope I am using the right terms here) used by viber now are similar to that of the other messaging blocked apps like Tango, weChat and skype?
Please help us on this. Thank you!Maybe its a Viber problem. As that is not an Apple product, why don't you try and contact the developer?
-
pls help
agil123 wrote:
wud u not be able to get internet without signing up for data service
Correct, a standard phone service will not provide internet connection. You need to talk with your cellular provider and ask for a data plan for iPads. Not a phone service. -
pls help
agil123 wrote:
wud u not be able to get internet without signing up for data service
Correct, a standard phone service will not provide internet connection. You need to talk with your cellular provider and ask for a data plan for iPads. Not a phone service. -
Hi there,
I have asked my service provider to help me unlock my iPhone a couple of days ago. Reply came as text from the network today to log in to iTunes. I did but I don't know how to find if my phone is 'unlocked yet or not'.
Please advise.Have a look at this article:
http://support.apple.com/kb/HT5014
Maybe you are looking for
-
How to minimize the size of JButton?
how can i determine the size of a JButton? the default size of a JButton on the frame is too big.
-
i have a nano and use it alot my kids got shuffles today and when i try and downoad new version i get Not a Valid Win 32 application I have windows xp i see alot of these posted and no answers anyone have any sugestions
-
I posted a similar topic a few weeks ago and I had marked it as solved because I had an individual VI running this block of code that worked. However, once I implemented it into my VI, it stopped working and I have no idea why. What it's supposed to
-
Unable to Burst e-mail because Template not found
Hello, I am working on getting a bursting control file set up to e-mail some invoices out and can't seem to get past a hurdle where the publisher cannot find the template file to use. Here is the Control file info: ?xml version="1.0" encoding="UTF-8"
-
Several new cameras for the RAW support
Adds RAW image decoding support for the following cameras: Panasonic DMC-LX1, Panasonic DMC-LX2, Leica M8, Leica D-LUX 2, Leica D-LUX 3, Fuji S5 Pro, Nikon D40x, and Canon EOS 1D Mk III. Resolves an issue in which some DNG images may appear tinted or