Service Purchase Requisitions not being transferred

Dear Experts,
I'm not able to transfer the service purchase requisitions with service master but it is working fine for standard purchase requisitions with material master in SRM 7.0 using report bbp_exttransfer_req. Also how to address different purchasing organization and purchase groups with different company codes and plants, as the transferred PR is being defaulted by the channel values in the srm organizational structure. For Service purchase requisitions I'm receiving error as " Define Transaction type for local system" in the srm system and in ecc it is as ANOENTRY.
Note : Apart from using BBP_DOC_CHANGE BADI looking for a standard way of meeting this requirment.
Thanks and Regards,
Venkata Koppisetti.

Hi
Follwoing is what I can think in your scenario:
1. Check if the service master is replcated from ECC to SRM, if at all you have service master in your ECC PR.
2. Maintian all the Org. structre elements of ECC(PUR org, Pur grp and Co.Code) of ECC in SRM using transaction PPOCA_BBP. This will take care the same Pur. Group you have on PR of ECC will also moved into SRM documents(RFx or SC sent to SOCO).
3. Since your syaing you are getting an error for define transaction type, check in the attribute "Define transaction" has been mainiantiend.
with regards
Manjunath

Similar Messages

Purchase Requisition Is Being Getting Created In APO But not being publishe

On doing, SNP Location Heuristics on one of our item, purchase requisition is being getting created in APO (We are able to see the same in RRP3) but the same is not being getting published in ECC. On doing CCR of the said location - product combination, it is showing Error u201C182u201D. We have checked the following parameters :-
Item is an APO Item i.e. X0.
It is having a proper Purchasing Group.
As This be a purchase item. So, it is having a valid single Purchase Info Record.
Item Has Not Been Blocked At Any Level.
Vendor From Whom This Item is being getting procured is also open (Not Blocked).
Please suggest what else to be checked and what else can be the reason for non-flowing of purchase requisition from APO to ECC.
Thanks & Best Regards,
Sanjeev Chugh

Hi Sanjeev,
Please check change pointers if any and send them to ECC. Check the order in the planning book whether it has picked the same source for which there is a Purchase info record. If these all are fine then You send them to ECC from the CCR then check the log in ECC through CFG1 tcode.
Regards,
Kishore k Reddy

Movies i purchased on my Apple TV are not being transfered to my Ipod?

why aren't the movies i purchased [not rented] on my apple tv not being transfered to my ipod? When i purchased them on the screen it said that my movies would be transfered to all my apple devices.

See:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
Youmay have to redownload the SD version

How to de-activate Qty and Price fields for Service purchase requisition

Dear all,
We have a request to de-activate (leave it as "Display") the fields of quantity and gross price when changing a service purchase requisition of a specific document type.
In example: We want that purchase requisition type NB, allows in change mode (ME52 or ME52N) to change the quantity and gross price of the services. On the other hand, these two fields must be only visible for order type ZNB. Besides this must be happening only for services.
Changing PT9 or PT9B will affect also the creation, and if we only configure based on transacction and document type does not work.
Any help will be highly appreciatted.
Cheers

Hi,
You may have to write a output requirement routine and assign the same to the output type in NACE.
But i don't think you will get the old and new data of Purchase order in requirement routine (program : SAPLV61B). You may have to export the data into memory from either a BADI method or User exit and then import the same in requirement routine.
Regards
Vinod

Material Number mandatory for PR exceptP for Service Purchase Requisition

Hi All,
Our client's new requirement is we need to give material number mandatory for Purchase Requisition. But it should not affect for Service Purchase Requisition (as we don't have material number with material type DIEN. Till now, we were using Acc Assignment Category K and Item Category D with only Short Text description). We have separate document type for Service Purchase Requisition(ZSRV).
In order to make Material number mandatory, in PR, we need to give in "Define Screen Layout at Document Level for PR",right? Is there any way to give, "Material Number Mandatory at Document Type Level"?
Please suggest.
Regards,
rosh

hi sridhar,
Thank you for your answer. So as you said, there is no possibility to make material number as mandatory at DOCUMENT TYPE level through Customzining, right?
Regards,
Rosh

Converting Service Purchase requisition to Purchase order

Hi,
In our scenario the service requsitions are generating from Project order (PS module). We have to give multiple purchase orders against this service purchase requisition. System is not allowing to do so.
Viv

Hi,
***As you creates purchase orders in ME21N WRT Purchase requisitions
***Use t.code:ME5A & execute by entering u201CProcessing status u2013 B u201Cin dynamic selection--> Purchase requisition.
***As you needed restrict PO creation with more than PR Quantity and set error message follow path:
SPRO->Materials Management->Purchasing->Environment Data-->Define Attributes of System Messages
06 076 as Error messages.
when all the PR quantity already converts to PO, system will not allow to create a another PO from that same PR again.
Regards,
Biju K

Create a Service Purchase Requisition using BAPI_PR_CREATE

Hi Everyone,
I am using BAPI_PR_CREATE.
I am able to create Standard Purchase requisition.
But while creating Service Purchase Requisition, i am not able to create.
I am getting no errors for the PR Item, but even after entering Services for the PR Item i am getting error message in return table of bapi "Please Maintain Services or limits'.
Do i have to pass value to Package_No field in the item level table of BAPI_PR_CREATE.
Please help.
Regards,
Akash

Hi,
Check this link for creation of services.
Bapi_pr_change in services
PO Upload through BAPI_PO_CREATE1 - Problem in Service Item
BAPI_PO_CREATE1 Error
Hope it helps
Sujay

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Purchase requisition not generated

Hi Gurus,
Purchase requisition not generated at the time of sales order for Item category tab. Can you please let me know the posible reason.
Thanks in advance...

Hi,
As per my understanding, you are running Third Party Process, if yes then, please maintain the following setting for the same;
Mater Data Settings:
1. Item Category Group as BANS in sales org 2 in MM02
2. in MRP2, in procurement type should be 'F'
SPRO Settings:
1. Item Category TAS: Maintain Billing relevance as 'F'
2. in VOV6 Schedule Line CS: doesn't have Movement type therefore keep the field as blank
3.ASSIGNMENT: assign Schedule line CS to item cat TAS in VOV5 and TAS to order type in VOV4
4. in vov6 Schedule line CS Item Cat as '5' i.e. Third party and account assignment cat as 'X"
Now run the process..I hope this will help you...
Regards,
Bharat B

Purchase requisition not subject to a release strategy

Hi All,
When I will release PR, appears Error: "Purchase requisition not subject to a release strategy". I've check the configuration, but it was appropriate. Can anyone help me to find the solution?
Regards,
MamaRara

hi
In our case also we have faced this problem
Usually when you are executing ME54N the system displays the latest viewed / modified PR.
Hope in your case the latest PR viewd / modified is not subjected to release. Hence it is showing the message
Go to ME22N open your PR - Press save button. Then try to open the same in ME54N.
Hope this will help you
SAS

Purchase requisition not to be created if sales order is incomplete.

Hi ALL,
I have a requirement from the business wherin they want purchase requisition not to be created for the incomplete sales order
in case of third party / invidiual P.O sales orders.
We have defined some fields in the item category incompletion status and if this fields are empty then the P req shld not generate.
Can anybody guide me what settings to be made to acheive this.
Please help me in this.

In t.code OVA2, try to assign an incompletion procedure at schedule line level. This procedure can be assigned with relevant status like checking goods movement, and general checked. Then test the scenario.
There is an OSS note out there, but it is NOT exactly represents your scenario. However you can have a look at it.
Note 623267 - Purchase requisition in spite of missing configuration II
Regards,

"Material purchase requisition" not allowed (Use Status PROV, object TM0000

Hello Gurus,
I am getting the following message every time I enter a material in the sales order. The material entered requires a Purchase Requisition (PR) to be created when it is entered in the order. We have done Configuration thru Order Status Profile that will prevent PR creation at time of Order creation.
The message is as follows:
"Material purchase requisition" not allowed (Use
Status PROV, object TM0000000001VB)
Solution requested: We do not want to see this message appearing so many times. Can you pl let me know if there is a way to avoid this.
Thank you
Vasavi

Hi Vasavi,
I am not talking about the po check above that one tab like check purchse order no in this feild keep emty and also below that enter po number also keep un check
and also please check when you creating sales order beside po date one tab is availble check any data in default that
that tab name is display doc header details in that tab purchase order tab in that any infirmation is default check that also
Hope this will helps you
Prem

Photos are not being transferred from my iPhone

When I plug my iPhone into my Mac Mini running Lion my photos are not being transferred to my mac even tho the sync completes. The phone is running ios 5
Help

I'm just clarifying here. It sounds like you are using iTunes to sync your iPhone, which is fine, but iTunes isn't built to remove the photos off your phone and put them on your computer. Try opening iPhoto and importing all your photos there.

Sub contracting Purchase requisition not created thru Service Order

Hi Experts,
I configured to create Service order automatically from Customner service.
Now we have the SM03 repair service order .When we try to create Sub contracting Purchase requisition.
(Selecting Subcontr tick in External tab of Components tab)system gives error saying --
Op. 0010 must have exactly one component as 'Rework Material to Subcontr.'
Message no. AD_SUBCON109
I checked the notes and It was not help ful.I understand I was doing something wrong in creation.
The control key used is SM03. Can any body help me in the above problem.
Regards
Rammohan.

Dear Sen,
The same error message refers to one of the following material provision indicators getting to me also:
"S" - an entry within table T417 is missing where KZBRS (A&D-Specific Material Provision) is not set
"X" - an entry within table T417 is missing where KZBLF (Rework Material from Subcontractor) is not set
"F" - an entry within table T417 is missing where field ADSUB_DEFDLV (Deferred Delivery) is not set
also, i Insert a row with S and keep MPCust and MPVend blank and Check the A&D MP box
getting following error "
Op. 0010 must have exactly one component as 'Rework Material to Subcontr.'"
Can u tell me the config for MPI??

Service purchase requisition/order with Material group optional

Is it possible to create a purchase requisition/order with item category D (services) without entering any material group?
We would like to enter only the G/L account but not the material group.

Hi,
It is not possible to create PR/PO without material / Service group & Item catagory D.
Better create service groups like material group which will help you for reports also.
Regards,
Manish Jain

Service Purchase Requisitions not being transferred

Similar Messages

Maybe you are looking for