Service request error with TDS3034B Scope

Hello,
I am getting an error with a service request when initializing my oscilloscope. When I use the VISA Discard Events vi, there is an error 1073676292 that says
VISA: (Hex 0x3FFF0004) Operation completed successfully, but queue was already empty.
However, immediately after, I use VISA Enable Event and get an error 1073676290 that says
VISA: (Hex 0x3FFF0002) Specified event is already enabled for at least one of the specified mechanisms.
Both Discard and Enable Events are Service Request, so I am unsure why it would read that there is an empty queue, and then afterwards read that the Service Request is already enabled.
Thank you for any help you may be able to give on the subject.

Hello,
Has the event already been enabled before this? I believe it will stay enabled until the VISA Disable Event VI is called, and not the VISA Discard Events VI.
Regards,

Similar Messages

Processing service request error: QuickTime Error: -50? ***?

Hey everyone, trying to export a movie from FinalCut Pro X with compressor and when compressor gets to the end I get this error and no file
Processing service request error: QuickTime Error: -50
What is going on?
Final Cut Pro X version 10.0.7
Compressor 4.0.6
<mrk tms="377617624.517" tmt="12/19/2012 14:47:04.517" pid="739" kind="end" what="service-request" req-id="BDCFEEB8-D118-43F1-9011-957801579EDD:1" msg="Processing service request error: QuickTime Error: -50"></mrk>

Got this error -50 too.
At first thought it could be due to incompatible format but when I isolate it, it was alright.
But when I change my ext HDD, the problem stops. Weird.
My guess is maybe due to insufficient memory space (well at least for me).
Good luck ...
Cheers

User exit or BADI to validate service request value with PO value

Dear gurus,
Is there any userexit or BADI to validate service request value with PO value. Please help me regarding this.
Thanks in advance

Hi,
Please check these enhancements (SMOD) for user exits available of transaction ML81N.
SRV_FRM - SRV: Formula calculation (obsolete since 4.0A!)
SRVSEL   - Service selection from non-SAP systems
SRVREL   - Changes to comm. structure for release of entry sheet
SRVQUOT - Service export/import for inquiry/quotations
SRVPOWEB - Purchase order for service entry in Web
SRVMSTLV - Conversion of data during importing of standard service cat.
SRVMAIL1 - Processing of mail before generation of sheet
SRVLIMIT - Limit check
SRVKNTTP - Setting the account assgnmt category when reading in, if "U"
SRVEUSCR - User screen on entry sheet tabstrip
SRVESSR - Set entry sheet header data
SRVESLL - Service line checks
SRVESKN - Set account assignment in service line
SRVESI   - Data conversion entry sheet interface
SRVENTRY - Unplanned part of entry sheet (obsolete since Rel. 3.1G)
SRVEDIT - Service list control maintenance/display)
SRVDET    - User screen on tab strip of service detail screen
INTERFAC - Interface for data transfer
Regards,
Ferry Lianto

Service Request template with status resolved

Hi all,
There is a way to create a Service Request template with the status "resolved"? We would like to use this kind of template in a location when we don't care about the issues, but we need to know their number. So we just have to open a new
SR, apply that template and close it automatically.
Thank you,
Eugen

Hi,
If no Activities related to your Service Request it will completed automatically, If actitivities related than you must create a workflow to complete the activities first, then your SR will be completed.
Antoine AL Ibry

IPod Shuffle Service Request Error???!!!

Hey all, I'm sending my iPod Shuffle back to apple because it's no longer recognized by iTunes of my PC and it no longer charges either. So I entered all my info on the onlince service request page, credit card, shipping address, etc. Then after I hit the last step, I got 2 "SQL Server" errors or something that popped up, but the page with my case number and dispatch number, etc. still loaded. So what I'm asking is, did Apple really get all my info, because if this SQL server error message popped up didn't send all my data, I'll be charged $169 (I CANNOT AFFORD THIS!) right? So I guess I wait and see if I get an email from Apple, but any help would be appreciated, $169 is far too much for me at the moment
Windows XP Online Service Request Webpage Gave SQL Server Error...

Have you had a chance to look at this troubleshooting page? It may be of some help: Error 1415, 1417, 1418, or 1428 when restoring or updating an iPod in iTunes 7 or later

SSIS Web Service Task Error with WCF Service

I have read all the other posts on this site and have not been able to resolve my issue.
For testing purposes i created a very simple WCF service that takes no arguments and returns true. That is all it does.
When i create a winform client and instantiate the service i can run my service method and get true back so i know the service works.
I then create a test SSIS package with 1 task, a web service task.
I set the web service tasks properties as follows:
http connection: http://localhost/WCF_SSIS_Prototype/Service1.svc
wsdl file: C:\...\SSIS_WCF_Prototype\Service1.wsdl (I know this is not a valid path, i changed it for posting to forum)
Service: Service1
Method: GetData
Variable: User::BResult
When i run the package i get the following error:
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Method 'ProxyNamespace.Service1.GetData' not found..    at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)    at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection)    at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
I'm not sure why it is saying "Method 'ProxyNamespace.Service1.GetData' not found. It the web service task trying to create a proxy class and naming the proxy class namespace ProxyNamespace?
Any help is greatly appreciated.

Hi,
How do you get around the same issue if your string type is based on a client token ? I downloaded the .wsdl file, was able to see the service name, method and when selecting a method type, I am required to provide a client token which was given
to me. (Name column = clienttoken, Type = string, Value = 2227656 - ec8922 (client token numbers goes there)? I am new to use ssis and need your help please
error message: Web Service Task] Error: An error occurred with the following error message:
"Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: The web serrvice threw an error during method execution. The error is: An error occurred
when verifying security fro the message..
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()"
Thank you and regards,
Bili

Service Request Report with related Activities?

Just curious if anyone has seen or created an SSRS report off the DWDataMart related to Service Requests and corresponding activities? Specifically I am looking for approval activities and the approvers/status which relate back to Service Requests.

Smjohn,
Perhaps narative reporting can assist with this, I have a document I can send you that gives you information on narrative reporting. You can email me at alex.neill@{see profile}
regards
Alex

Service request question with iPhone 4

Tody I requested a service on my iPhone 4 and did all the steps they required, and it went successfully. I took my iPhone to the UPS store and gave it to them while giving them my repair ID. Later I realized that I needed to change the return address so I called Apple and while I was doing this someone in the dispatch department cancelled my first service request. The representative that I had talked to was kind enough to create a new one for me and that worked out but I had already given my iPhone to the UPS store with the old repair ID. Should I be worried that I will not recieve my iPhone back now that the repair ID I used to give the iPhone to the UPS store has been cancelled? The representative told me that the dispatch department would take care of everything, but I am still worried that now I might not get my phone successfully returned...

Hello Blowem,
call Apple Support back maybe in the AM
tomorrow to see if they have all of your
info correct. Make sure you have your serial
number and all of the UPS data on hand.
Be patient and polite. I have never had anything
but excellent support from Apple. Hope this holds
true for you.
Good Luck,
A

Service Request error - No Transaction Types assigned in customizing

When I click on Service Request in IC Web, I get the following message "No Transaction Types assigned in customizing" even with the Standard Business Role. It takes me to the search screen.I maintained Business Transaction Profile. Did I miss anything?
Please Advice,

Hi Ragz,
Colleague of mine had the same problem.
This is what you have to do.
On the navigation bar profile which is linked to your business role you must add the following entries on the Define Generic OP Mapping part of the Navigation Bar (in the customizing of the NAvigation Bar it's the before last folder)
Object Type=CRM_SRQM_INCIDENT Obj.Action=search use target= x target id=TINCSR highlight=SRV-INC-SR
Object Type=CRM_SRQM_INCIDENT Obj.Action=display use target= x target id=TINCOV highlight=SRV-INC-SR
Object Type=CRM_SRQM_INCIDENT Obj.Action=edit use target= x target id=TINCED highlight=SRV-INC-SR
Object Type=CRM_SRQM_INCIDENT Obj.Action=create use target= x target id=TINCCR highlight=SRV-INC-SR
Object Type=CRM_SRQM_INCIDENT Obj.Action=execute use target= x target id=TINCEX highlight=SRV-INC-SR
You can find these entries in the standard navigation bar profile SRV-PRO.
This enables the system to check which transaction types are available of type Service Request.
Btw the Business Transaction Profile is only relevant for IC scenario's.
Hope this helps.
KR,
Micha

Error with the Scope parameter for component

Hi, I am using JSF2.0 in my web. In the home page (index.xhtml) i have an album gallery with session scope. However the gallery is available to all the users, what should be the scope for this component? After setting session scope, a session key is generated which is appended with the URL and because of this (perhaps) other links are not opening. i mean whenever i clicks on any link (about.xhtml), it displays nothing. Removing the bean from session scope makes everything fine except gallery (gallery doesn't rendered).

That version of the package has been built with apache 2.2.x. Be sure to use that version of apache too, as 2.0 won't work with that specific package.

Test published web service experiment error with Status Code 400

I have created an experiment in Azure ML Studio free version that works perfectly in Azure ML Studio when running. After the web service publication I am presented with the following error when I call a test for my web service.
5: Error 0085: The following error occurred during script evaluation, please view the output log for more information: ---------- Start of error
message from Python interpreter ---------- data:text/plain,Caught exception while executing function: Traceback (most recent call last): File "\server\InvokePy.py", line 98, in executeScript outframe = mod.azureml_main(*inframes) File "\temp\azuremod.py",
line 55, in azureml_main File "C:\pyhome\lib\site-packages\pandas\core\indexing.py", line 119, in setitem self._setitem_with_indexer(indexer,
value) File "C:\pyhome\lib\site-packages\pandas\core\indexing.py", line 438, in _setitem_with_indexer raise ValueError('Must have equal len keys and value ' ValueError: Must have equal len keys and value when setting with an iterable ---------- End
of error message from Python interpreter ----------, Error code: ModuleExecutionError, Http status code: 400, Request id: 2c22cced-a109-4e12-856e-455a90644e68, Timestamp: Thu, 23 Apr 2015 10:28:12 GMT
The input data for the test are:
userID = "U5000"
restaurant = "resA"
rating=1
These data are exactly the saame data that my experiment takes as input in Azure ML Studio running mode. My experiment is consisted of 2 python scripts and one meta data editor. The first python script reads the input data, calculates and feeds them into
the metadata editor and the metadata editor feeds the result into the second python script. The second python script module code is very simply and just pivots the data fed:
import pandas as pd
def azureml_main(dataframe1):
newtable = pd.pivot_table(dataframe1, index="restaurant", columns='userID', values="rating")
return newtable,
I cannot understand what is the error and why it is not raised during the running proccess but it is rised during the testing web service proccess. I should note here that when I use only one python script module the above error is not raised in the web
service call. Waiting for your response
Thank you very much.

Related to
https://social.msdn.microsoft.com/Forums/azure/en-US/ff40b046-a7bb-4718-bedc-4260ef95d8d7/test-web-service-published-returns-error-code-internalerror-http-status-code-500?forum=MachineLearning
Thanks for the feedback. This is a known issue. We are working on it. Sorry for the inconvenience.
Luis Cabrera. Program Manager -- Azure Machine Learning @luisito_cabrera Disclaimer: This post is provided &quot;AS IS&quot; with no warranties, and confer no rights.

"The server responded: 550 5.3.4 Requested" error with Outlook 2010 SP1

Hi
I set up an outlook.it account in Outlook 2010 SP1 64-bit to receive and to send E-Mail via POP3. Now, when I test this account, Outlook displays this SMTP error:
The server responded: 550 5.3.4 Requested
How come?
Thanks
Bye
Balubeto

Hi Balubeto,
This error occurring because your account has blocked and in such scenario, you should firstly contact to your ISP (Internet Service Provider). Also check and use the accurate
SMTP authentication so you can connect with your ISP or mail server.
For more about 550 5.3.4 Requested,
take the help from the given link: http://office.microsoft.com/en-us/outlook-help/troubleshoot-550-553-and-relay-prohibited-errors-HA001112833.aspx
Note: Improve community discussions by marking the answers helpful.
Thanks
Clark Kent

Hyperion Shared Services Configuration Error with Weblogic 9.2

Hi All,
I have been trying to configure Hyperion Shared Services 9.3.1 with Weblogic Ver 9.2
During configuration of the Database and the Application Server, I select Manual Configuration option on Weblogic 9
However, it returns a configuration failure everytime of the Database.
In my case, the DB used is SQL 2005.
Can someone, please advise me.
Thanks in advance
Regards,
Apo

Hi Apo,
Check the configtool.log in the logs/config folder and post the error message that is being returned.
Thanks
Nick

"Bad request" errors in Firefox with second user account

Yesterday, I set up a second user account for my husband to use. Everything seems to work fine with one annoying exception. When Firefox 3 is used as the browser under the new user account, I get frequent "Bad Request" errors with various web mail programs (MobileMe, GMail, Earthlink's web mail).
This does not happen when the same Firefox 3 is used under my original user account. It also does not happen when performing the same functions with Safari under the new user account. It also doesn't seem to matter whether Fast User Switching is enabled or disabled.
I have tried clearing caches, deleting cookies, deleting preferences etc. in the second user's Firefox, all to no avail. Anyone have any other ideas?
I guess one thing I'm a little unclear about... is the second user actually using the same Firefox app as the first user? If so, would there be a way to install a 2nd Firefox app that would only be for the second user? I'm just thinking maybe there is some kind of conflict going on?
Any thoughts or help out there much appreciated!

I think I figured it out. I found an article online that said if you have Parental Controls enabled on an account (which I did on the second user account), it will not allow Firefox to write cookies, thus causing the "bad request" errors.
This is not exactly true, as Firefox under the new user DID seem to be writing cookies just fine. However, when I disabled Parental Controls on the account, suddenly the errors went away. So, it doesn't have to do with cookies, but there is something about having Parental Controls turned on that can cause these errors.

Create a service request with the Account confirmed filled out

Hi all, I'm working on an IC scenario where we have to create a Service Request based on: functional location and customer.
This is the process steps:
1) search for the functional location (FL) and confirm it
2) confirm the account of the FL (we have a list of account related to the FL, partner function)
3) create a service request referring to the FL and the Account confirmed in the prev-step
My need is to find an automatic way to replicate the FL and the Account prev-confirmed directly into the Service Request, without repeat the search.
Any suggestions?

Hi Anubhav, thanks for your replay. Your idea is good, but unfortunately our process is a little different. We have to manage with the FL, that is the central item of the Service Request, and with one of the several partner function of the FL.
So, first, the Agent has to search the FL and then confirm the right Account between the FL's partner (each time we have to create a service request, the Customer could be one of the FL's partner function). Now, I'm investigating if with a Badi, I can transfer the FL confirmed with the Account Identification, directly into the Service Request.
Interaction Center WebClient->Business Transaction->Service Ticket->BADI: Product Assignment for creation of Service Items
Thanks.
BR,
Andrea.

Service request error with TDS3034B Scope

Similar Messages

Maybe you are looking for