Service request fields enhanced through AET are not reflecting in BW DS

Hi All,
the CRM developer has added 3 service request fields to crmd_orderadm_h, crmd_service_h via AET. He has marked all the 3 fields as 'BW reporting relevant'.
I have now checked the BW extractors in the hope that these 3 fields will now be appended to the BW service request datasources automatically.
But instead of adding the fields to service request datasource(0CRM_SRV_REQ_INCI_H)(BUS2000223), it added the 3 custom fields to process datasource 0CRM_SRV_PROCESS_H.
I am not sure what exactly have gone wrong . Is there a way to get these custom fields automatically into 0CRM_SRV_REQ_INCI_H.
Thanks in advance,
Ramz

Hi Ramz,
this seems to be identical to
Re: Fields enhanced through AET are not reflecting in CRM DS Extract structure
Please find my reply there.
Best regards
Matthias

Similar Messages

Getter & Setter Method not getting called for a field enhanced through AET

Hello,
I am new to SAP CRM 7.0 and working on a requirement.
A Z-field was added by our functional guy in CRM 7.0 WebGui through AET in the 'Create Opportunity' transaction (Header data).
Now the requirement is, as soon as the opportunity is created through the WebGui, I should post a document in R/3 and paste that document number back to the enhanced Z-field in opportunity.
Work done by me:
I pressed F2 on the enhanced Z-field in the WebGui screen and took the details of view, component name etc. After this I went to normal SAP CRM system and open tcode "BSP_WD_CMPWB", located the corresponding view "BT111H_OPPT/Details" and right clicked & enhanced the same.
Then I opened the structure of this view, expanded context node, located context "BTOPPORTH" and inside this, located my Z-attribute. Now right clicked on the Z-attribute & selected the option "Generate SETTER & GETTER Methods" and these were generated successfully.
Problem:
The problem is even after putting external break points in these methods, these methods are not getting called while creating, modifying & displaying the Opportunity in WebGui.
I hope that for the requirements that I have, I have to do the coding in "Getter & Setter" methods. But since these are not getting called, I am unable to proceed.
Please help/suggest how to achieve this.
Thanks in anticipation.
Best Regards,
Rahul Malani

Hi,
If you can see the field in UI and still get_ method is not being triggered then try to regenerate these methods. If it still doesn't work then please look for SAP notes or raise an OSS.
There should be some note for the issue you faced.
please refer:
Help Needed immediately - AET getter setter methods not getting triggered
Regards,
BJ

What is the use of notes button in the Service Request field in Siebel Application?

Hi,
I have an doubt with the "Notes" tab in Service request field of Siebel Application.
Can you please explain me about this tab.
Thanks
Thriveni

Sometimes 255 characters is not enough and with the Notes you can add more text.
And from a performance perspective it is better to make the Notes a seperate Tab, so it only gets retrieved when explicitly needed.

Fonts are not reflecting while running Java Applet Through Forms

Hello Oralce Gurus!!
I have a Java Applet which has few lines of text in different
fonts such as AgencyFB, Verdana Ref etc., When I am running this
applet from console, I am able to see the text in different
fonts. Where as If I run the applet through forms (as a Bean
(ViewerBean) ), the fonts are not reflected. The text appears in
a default font.
All the fonts are installed on WinNT, where the applet resides.
I will be greatful if anyone can suggest me a solution.
Thanks,
Raghu

try out this
ImageIcon img1=new ImageIcon(this.getClass().getResource(imagename));
for exmaple
Imageicon img1=new ImageIcon(this.getClass().getResource("name1.jpg"));
dont 4get to include the image files in the jar file

Project Server 2010 permissions granted through RBS are not flowing through to Project Sites.

Hi,
I have configured RBS as "The Project Owner is a descendant of the user via RBS" its working fine for Projects.
But users are facing access denied issue when working with project sites RBS is not working for project sites.
Can any one Help me How can i grant permissions Automatically for project sites also as same like projects is it possible ?
The Members in Executives group can see all projects in organization but same like can they see all project sites ?
I have found one blog of
RaymondRis he is recommending to do it manually as its not possible to grant Project site permissions Automatically.
http://blogs.technet.com/b/raymond_ris/archive/2013/05/09/project-server-2010-permissions-granted-through-rbs-are-not-flowing-through-to-project-sites.aspx
Thank You, Kumar KSV

Kumar,
The permissions to project sites is not cotrolled by the RBS, as you have discovered. It is controlled by the Security Category permisisons, and the settings if the permssions are auto synced. The permissions work like this:
Project managers who have published a project or who have Save Project permissions on a project are added to the Project Managers (Microsoft Project Server) site group.
Team members with assignments in a project are added to the Team members (Microsoft Project Server) site group.
Other Project Server users who have View Project Site permission on a project are added to the Readers (Microsoft Project Server) site group.
As long as you use the Auto Sync of permisisons for project sites, i do not think there is any work around.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

In the Dreamweaver brim Bindings, the recordset and all of the fields of the table are not EXHIBITED

In the Dreamweaver brim Bindings, the recordset and all of the fields of the table are not EXHIBITED. I don't know if an option of configuration adjustment exists in Dreamweaver that corrects the problem. It is Dreamweaver CS4 - Version 10.0 build 4117.

I have traced the problem to a corrupted profile. When I captured the images in question, I also used Color Cherckr to create a profile for processing. When I apply that profile to the adjustments I make, I can no longer "Edit In". If I use another profile, even one that I created using Color Checkr at a different point in time, I don't have the issue. Something seems to have corrupted the new profile. I will re-create the profile and see if the issue is resolved.

Changes are not reflecting on Script layout

Hi Gurus,
I made chandes in SO10 standard include this include can be used in Script,
when ever I copied script from DEV client to Test Client changes are visible in SO10 include text But not reflecting while executing the Script through Transaction.Please suggest.
Thank You,
Usha.G

>
ushasri gadipally wrote:
> I copied script using scc4 and created a transport request even so10 include also, But not reflecting on Script layout.t
Check if the std. text changes are reflected in your testing server in SO10. If not you have to import the Std. Text using SCC4 as well.

Changes are not reflecting in the Quality

Hi,
These are standard SAP Components. I have imported the ESS and MSS Packages.
Actually 3 Development Components are using in my application (Tra,TraTri and TraTre).Tra is the root DC.
I have made changes to those objects and sucecessfully build without errors.
After check-in all activities those activities are working fine in Development system.
But those changes not refclecting in Quality system. So i was founded build log error in Consolidation.
I was fixed the error in the Development system and build the components without build error.
still now changes are not reflecting in the quality system.
But out of 3 DCs(Tra,TraTri,TraTre) Tra and TraTre are working fine in Quality(changes are reflecting) only problem in TraTri DC (changes are not reflecting in the Quality)..
Please help me as soon as possible....Its very help full for me
Regards
Sudhakar Reddy A

Hi Slava,
very very thanks to you for the fast reply. but one thing in my side.
When i release the activities after successful build, i export those changes and place them in the import queue of the consolidation system in the CMS.
The export in the SAP NetWeaver Developer Studio packs all selected activities into a change request, and then places them in the import queue of the consolidation system.
When the my system administrator imports this request into the consolidation system, the released changes are integrated into the DTR workspace of the consolidation system; the build server compiles the modified components.
my system administrator findout build error in consolidation system:
[wdgen] [Error]   .PersonnelNumberCheck: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Error]   .PersonnelNumberCheck.I_Employeenumber: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Info]    com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.E_Name: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Info]    com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Type: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_No: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Field: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.System: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V1: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V3: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V2: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_Msg_No: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Number: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V4: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Parameter: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Id: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Row: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextValueAttribute EmployeeName [readOnly]: The context attribute has to be read-only. (Hint: As the mapped context attribute is read-only this attribute has to be read-only, too.)
I was fix error in my development system with out any build errors. still now not working ...pls give me any suggestion.i dont have access to consolidation system.
Regards,
Sudhakar

Changes made in jsp are not reflected

webpages are not reflected after modifying jsp pages
what i need to do??
thanks in advance

Hi
Thanks for your reply,
I am using CQ 5.5 and was installed service pack 2.
1. We make package from SVN or through maven build to the CQ dev server.
2. JSP changes perfect but /var/classes java files contains old code(i.e new JSP file complitation is not happening )
3. Only when we restart server, /var/classes reflecting with new code other /var/classes have old code only.
What is best procedure to re-compile JSP with out Restart server.

Error messages through BADI HRPAD00INFTY not reflected in Portal

Hi
     We are on ESS 6 and using web dynpro based Iviews.
     Various custom validations have been configured in R/3 via
     BADI <b>HRPAD00INFTY</b> for leave request.
     But those validations are not getting reflected when creating a leave through
     leave request Iview in portal.I need all those custome R/3 validations
     messages to appear in portal as well.
Regards
Mohamed Mansoor

> In which method should I write the validations and
> more over the BADI has already been implemented via
> class CL_PT_ARQ_REQ.
write your validations in SIMULATE_VIA_BLOP method. You can find current record in IM_ATTABS_TAB. after ur validations, when u want to raise an error message use follwing code.
CALL METHOD MESSAGE_HANDLER->ADD_MESSAGE
EXPORTING
IM_TYPE = 'E'
IM_CL = 'HRTIM_ABS_REQ'
IM_NUMBER = 'XXX'
IM_PAR1 = 'SIMULATE_VIA_BLOP'
IM_PAR2 = 'IF_EX_PT_ABS_REQ~SIMULATE_VIA_BLOP'
IM_PAR3 = 'BLOP'
IM_CONTEXT = ''
IM_SUBCONTEXT = ''
IM_CLASSNAME = 'CL_PT_ARQ_BLOP_ADAPTER'
IM_METHODNAME = 'MESSAGE'.
Here, IM_CL = 'HRTIM_ABS_REQ' is important.
This is message class created using se93. and XXX is the message number.
this should raise an error message on leave screen.
Cheers!!
Ashutosh

2LIS_02_ITM deleted line items are not reflected in BW

Hi,
Our current Data flow 2LIS_02_ITM-->DSO-->CUBE.
I am analyzing a Invoice, When it is created 01.04.2014 it has got 10 Line Items and all the data is load to BW,Invoice with 10 Line items.
In ECC I can now see the same Invoice only got 5 line items and from change log I can see 5 line items are deleted on 15.04.2014.These changes are not reflected in BW.In BW invoice data still shows 10 line items.
If I perform setup table job and ECC RSA3 for that invoice I am getting only 5.
I believe it’s something to do with 0RECORDMODE,Can you please let me know how to fix this in BW.
Thanks

Yes this is a known behavior in case of deltas.
For Deleted line items Rocancel field will have an entry with R.
To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
Regards,
AL

LPA changes are not reflected fully in 2LIS_02_SCL

The changes done to scheduling agreement, schedule lines are not reflecting in 2LIS_02_SCL, and there by resulting errors in delta update in BI system.
For example
     LPA     RM     SCL     Quantity                                    (2LIS_02_SCL)
ODS(A)      3001             15          800
ODS(C)     3001     X     15          300
     3001          15          800
PSA      3001     X     15          400
        3001             15          900
As we are using the Update type Addition,
From PSA, it is clear that the change is 500; this change got reflected in ODS properly.
But when I compare ODS data with EKET data,
LPA     SCL     ODS(Active)          EKET
3001     15     800               900
As you can see wrong validation results between BI & R3
I am missing the below changes happened to SCL in the extractor
     3001     X     15          300
     3001          15          400
The missing above entry is resulting errors.
Does anybody know how the EKET line changes can be tracked?
How to check the V3 Update, we checked the program: RMBWV302
Does anybody have idea where to track this error.
Note: the above case is happening to only a for few documents
Regards,
NK.A
Message was edited by:
        nandakumar a

Hi Renjith,
Thanks for the reply. Can you please let me know few more answers to the below points.
As the datasource 2LIS_02_SCL does not takes this event into account (only MA, MB, MC and MD), this field is not passed to BW (you can see the events per datasource in transaction LBWE)
You are referring to posting of the Material Ledger posting right ? Can you please give some more information about MA MB MC MD as I have verified in LBWE and could not find anything about it except that its picking that GLMNG value from MCEKET table.
Renjith, Please update your views on the below query. I am not able to get any answers from anyone on this query. I appreciate your reply.
In my opinion you would be able to fill it in the customer-exit of LIS (EXIT_SAPLEINS_001) or BW (EXIT_SAPLRSAP_001)
If I add a zfield to the SCL DS and then populate that field with the code in the include ZXRSAU01 , EXIT_SAPLRSAP_001 in that going to help.
Do I have to verify the events MA MB MC and MD while populating this zfield or I can just do a direct lookup on EKET
select single * from EKET
where EBELN = l_MC02M_0SCL-EBELN
and EBELP = l_MC02M_0SCL-EBELP
and ETENR = l_MC02M_0SCL-ETENR will do ?
So when ever the ds fields are getting populated in the org DS ...it will find this zfield in the same structure and will fill this field. Is that going to fix it ? I have also found couple of SAP Notes on the same issue and do you think implementing those notes will fix the problem without the zfield or code.
Could you please check out these notes 100690 and 431145. Please suggest.
Thanks,
Daniel

Changes are not reflected when objects transported from Quality to Productn

Hi
In case of moving some Transport requests from Quality to Production, some times the changes made to the selection screen of a report program doesn't reflect in Production. Also we don't see any Transport error while transporting. Moreover, we can see the changes by regenerating the Program in production.
Would any one help me out in this with the reason for this.
Pls suggest what needs to be done.
Satish.

HI,
Thanks for the reply.
- I have checked the respective transport too, and every thing seems to be fine.
- Recently we went to go live, for the next release, so earlier before go live, we didnt faced any proble.. Only now we are facing this problem, that we find the changes relating to selection screen are not reflected when the object / prog is moved from qty to Prd.
- Only problem is with the selection screen.(not getting reflected in PRD. In Qty we are able to see those changes.
- Then in order to reflect these changes in PRD, we have to re generate the object, then only it get s updated..
Satish.
Edited by: satish c on Sep 22, 2009 3:35 PM

Changes are not reflecting using af:resource for adding CSS

Hi,
I am trying to add new CSS file(say the name as customNew.css) to page template using af:resource tag, the changes are not reflected. Instead I see(using firebug) that, styles coming from different CSS file(say the name as customOld.css ) which configured on trinidad-config.xml and trinidad-skins.xml files.
I was under the impression that, the new CSS file(customNew.css) will override the old css (customOld.css). So, CSS added using af:resource tag will not override any other CSS ???
Any help will be appreciated
Thanks,
San.

Hi,
if you bring CSS to the browser through af:resource then this is not overriding any skinning definition. Skins can only changed in trinidad-config.xml file (which also can be done at runtime). Just adding a CSS file to af:resource wont do the trick here.
Frank

Changes are not reflect in PRD

Hi All,
i have an issue that is
i want to be small change correction in one report in BI DEV system,the changes had done successfully with one transport request,when i transport the request into BI PRD which has been not reflect but in quality changes been accommodate
suggest any one
Thanks In Adv
muraliv

hi bhanu thank you for your response
sap doesn't do magic i know ,but cahnges are not reflected into my production system ,it was the fact,i am not here to waste my time to post the unreliable things
the released transport request ended with RC 4 but i didnt find any chane but in quality its getting reflected,
i am also tried one more new request to my query and then release but i didnt work
thnak you

Service request fields enhanced through AET are not reflecting in BW DS

Similar Messages

Maybe you are looking for