Service's 'Workflow Running Gear" in menubar disappeared in Lion
Hi there!
I have created a 'Service' (Scale Images to xxx) in Snow Leopard; When the service was actually in operation, there was a Workflow Running Gear spinning in the menubar indicating that a workflow was in progress, that gear disappeared in Lion, now there's no reference and I can't tell if the Service is done or is working on the background, this was very helpful for a large amount of files.
Is there any way to bring that spinning gear back? or any other form of indicator to show when is performing the service or not.
Note: The actual Service works perfectly, but I would love to see a visual attestation that the work is going on.
Thanks!
You can try to create a service using the a launch application action. You might be able to use the Run workflow action as well. However, I'm not sure you'll get the menu bar status display using either of these methods, but it's worth a try. This will also probably fail if your service requires input.
I did some testing a while back and found that the services are executed by a service runner that doesn't enable the indicator. The best solution I've found is to launch the workflow via a Shell command using the automator command-line tool. For more info, open terminal and type: man automator
The reason this works is because the workflow is being executed by a Automator runner which activates the status menu. I don't know why Apple didn't add the functionality for services. There could be more to this issue, but that's what I've found so far.
Similar Messages
-
EBP Service Confirmation workflow u0096 Review step
Hi All,
We got a EBP Service Confirmation workflow running at the moment with single approval process. Its a custom workflow copied from standard WS1040002.
We got a new requirement where in I have to add additional process to review before approval. Can anyone tell is there a standard task which I can use to fulfill this task. Any info on review process is welcome. Thanks in advance.
Regards,
TrimHmmm... I think this is a little backwars. Usually it would be <b>you</b> who tell <b>us</b> how your process people want the review process to be, and then we can suggest ways of implementing it.
Then again, I don't know the area, and perhaps you are really saying that you are going to use some standard review process that is available via the application menus. -
Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks
Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP -
BUG: KEYBOARD SHORTCUT KEYS DO NOT ALWAYS ACTIVATE A SERVICE (A WORKFLOW)
BUG: KEYBOARD SHORTCUT KEYS DO NOT ALWAYS ACTIVATE A SERVICE (A WORKFLOW)
When you assign a keyboard shortcut to a Service (such as a Service Workflow created in Automator) using the System Preferences > Keyboard > Shortcuts, if that shortcut key combination includes the Command key, pressing that shortcut will always successfully activate the Service. No problem there.
However, shortcut key combinations that do not include the Command key (for example, the shortcut key combo Ctrl-Shift-D) WILL NOT activate the Service in any newly opened application, until you click on the Services Menu option in that application.
As soon as you click on the application's Services Menu, this seems to bind the shortcut key combo to the Service, and thereafter, that keyboard shortcut will activate the Service in that particular app. But if you then quit and reopen the app, you'll find the Service will once again lose its binding to the shortcut key combination and will thus fail to work again.
This means that shortcut key combinations such as Ctrl-D, Ctrl-Shift-D, F15, Alt-F15, etc are not really viable shortcuts for Services, because they will not work in any newly-opened application until you click on the Services Menu in that application.
This bug thus greatly limits the shortcuts that you can employ for Services, because you can only reliably use shortcut key combos that contain the Command key. This is a fault that Apple really needs to fix. This is a very old glitch: I notice it is present in Snow Leopard 10.6.8, as well as Yosemite 10.10.1.
This bug does not apply to application shortcuts, however, or to other shortcuts in the Shortcuts Preference Pane, just to Services shortcuts (including the Mac's default Services, or any Services you make yourself using Workflows on the Automator software).
To give some examples:
The following keyboard shortcuts for Services WILL NOT work until you click on the Services Menu in the application you are using (and they will cease working again when you quit and reopen the app):
Ctrl-X
Ctrl-Shift-X
Ctrl-Alt-X
Ctrl-Alt-Shift-X
Alt-X
Alt-Shift-X
F1, F2, F3, etc
So until Apple fixes this bug, the above type of key combinations, that do not contain the Command key, are best avoided as shortcuts for Services. It is particularly unfortunate that function keys F1 to F19 do not work reliably, as these would make great single-key shortcuts to Services.
However, the following sort of keyboard shortcuts for Services, all containing the Command key, once set up will always work without fail:
Command-Alt-X
Command-Ctrl-X
Command-Shift-X
Command-Ctrl-Shift-X
Command-Alt-Ctrl-Shift-X
Command-F1, Command-F2, Command-F3, etc
So all the above can be reliably used as shortcuts to Services.
Here X denotes keyboard keys such as A, B, C, 1, 2, 3, =, \, [, etc.
Note that even for keyboard shortcuts containing the Command key, you may very occasionally need to click the Services Menu to get them to work initially in an application (notably in the System Preferences application itself). But if this is necessary, it is just required once when they are first set up, and thereafter the shortcuts containing the Command key will always work without fail.
The above was tested on Yosemite 10.10.1, but most likely applies to other versions of OS X as well, as I believe this bug is an old one. This bug is definitely present in Snow Leopard 10.6.8, because I have observed this same fault in an old Mac I have that runs Snow Leopard.
I have reported this bug to Apple, so hopefully they will see my report and act upon it. However, it might be an idea if others also report this problem of Services shortcuts not working property, to ensure that Apple get the message. You can report a bug to Apple via their bug feedback page here.Exactly where do you want to use a GO BACK "shortcut" in Bridge? Maybe I don't even understand what you mean by Go Back. Bridge is only a file browser, nothing more. It doesn't open, edit, manipulate or save files at all.
Are you simply referring to going back to view a folder that you viewed before?
Please don't take this a criticism. As someone who will gladly pay money not to have to learn any shortcuts at all, I'm just puzzled and curious, that's all. -
DAC Workflow run error code: [36331]
Dear all ,
I want to Integrate OBIEE with Oracle R12.1.1
Initially I have defined new container & Phyiscal Data Sources in DAC
Datawarehouse Test Connection Successful
ORA_R1211 Test Connection Successful
FlatFile Connection ?
After that I created new Plan & generate the parameter and also built it successfully but when I run that execution plan it give error.
Please any one can help me regarding this issue.
also provide me step by step document to integrate OBIEE with Oracle R12.1.1
Regards,
YasirKindly See the log of last ETL run........
494 SEVERE Wed Dec 08 18:11:04 GMT+05:00 2010
START OF ETL
495 SEVERE Wed Dec 08 18:11:45 GMT+05:00 2010 Starting ETL Process.
496 SEVERE Wed Dec 08 18:11:50 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_Parameters_Update' has completed with error code 0
497 SEVERE Wed Dec 08 18:12:12 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SILOS.SIL_Parameters_Update.txt SIL_Parameters_Update
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
498 SEVERE Wed Dec 08 18:12:22 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_InsertRowInRunTable' has completed with error code 0
499 SEVERE Wed Dec 08 18:12:44 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_InsertRowInRunTable.txt SIL_InsertRowInRunTable
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
500 SEVERE Wed Dec 08 18:13:04 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_GlobalCurrencyGeneral_Update' has completed with error code 0
501 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GLAccountDimension_FinSubCodes' has completed with error code 0
502 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GroupAccountNumberDimension' has completed with error code 0
503 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_LocalCurrency_Temporary' has completed with error code 0
504 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_Stage_GroupAccountNumberDimension_FinStatementItem' has completed with error code 0
505 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GLJournals_Full' has completed with error code 0
506 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity' has completed with error code 0
507 SEVERE Wed Dec 08 18:13:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_Extract_Full' has completed with error code 0
508 SEVERE Wed Dec 08 18:13:15 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_ListOfValuesGeneral_Unspecified' has completed with error code 0
509 SEVERE Wed Dec 08 18:13:18 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_ExchangeRateGeneral_Full' has completed with error code 0
510 SEVERE Wed Dec 08 18:13:41 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GroupAccountNumberDimension.txt SDE_ORA_Stage_GroupAccountNumberDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
511 SEVERE Wed Dec 08 18:13:41 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_Stage_GroupAccountNumberDimension_FinStatementItem.txt SIL_Stage_GroupAccountNumberDimension_FinStatementItem
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
512 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity.txt SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
513 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_CurrencyTypes' has completed with error code 0
514 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GLAccount_SegmentConfig_Extract' has completed with error code 0
515 SEVERE Wed Dec 08 18:14:23 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SILOS.SIL_GlobalCurrencyGeneral_Update.txt SIL_GlobalCurrencyGeneral_Update
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
516 SEVERE Wed Dec 08 18:14:30 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_LocalCurrency_Temporary.txt SDE_ORA_LocalCurrency_Temporary
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
517 SEVERE Wed Dec 08 18:14:34 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GLAccountDimension_FinSubCodes.txt SDE_ORA_Stage_GLAccountDimension_FinSubCodes
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
518 SEVERE Wed Dec 08 18:14:38 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_Extract_Full.txt SDE_ORA_Stage_ValueSetHier_Extract_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
519 SEVERE Wed Dec 08 18:14:42 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_ListOfValuesGeneral_Unspecified.txt SIL_ListOfValuesGeneral_Unspecified
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
520 SEVERE Wed Dec 08 18:14:43 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSet_Extract' has completed with error code 0
521 SEVERE Wed Dec 08 18:14:49 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_ExchangeRateGeneral_Full.txt SDE_ORA_ExchangeRateGeneral_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
522 SEVERE Wed Dec 08 18:14:58 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GLSegmentDimension_Full' has completed with error code 0
523 SEVERE Wed Dec 08 18:15:05 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion' has completed with error code 0
524 SEVERE Wed Dec 08 18:15:10 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_Flatten' has completed with error code 0
525 SEVERE Wed Dec 08 18:15:10 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full' has completed with error code 0
526 SEVERE Wed Dec 08 18:15:17 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_TimeOfDayDimension' has completed with error code 0
527 SEVERE Wed Dec 08 18:16:04 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSet_Extract.txt SDE_ORA_Stage_ValueSet_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
528 SEVERE Wed Dec 08 18:16:16 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GLAccount_SegmentConfig_Extract.txt SDE_ORA_Stage_GLAccount_SegmentConfig_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
529 SEVERE Wed Dec 08 18:16:17 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_CurrencyTypes.txt SIL_CurrencyTypes
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
530 SEVERE Wed Dec 08 18:16:25 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_GLSegmentDimension_Full.txt SDE_ORA_GLSegmentDimension_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
531 SEVERE Wed Dec 08 18:16:28 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion.txt SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
532 SEVERE Wed Dec 08 18:16:57 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_Flatten.txt SDE_ORA_Stage_ValueSetHier_Flatten
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
533 SEVERE Wed Dec 08 18:17:22 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_DeriveRange' has completed with error code 0
534 SEVERE Wed Dec 08 18:17:31 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_TimeOfDayDimension.txt SIL_TimeOfDayDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
535 SEVERE Wed Dec 08 18:17:58 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_HourOfDayDimension' has completed with error code 0
536 SEVERE Wed Dec 08 18:18:21 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SILOS.SIL_HourOfDayDimension.txt SIL_HourOfDayDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
537 SEVERE Wed Dec 08 18:21:36 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_GLJournals_Full.txt SDE_ORA_GLJournals_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
538 SEVERE Wed Dec 08 18:22:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_PartyContactStaging_Full' has completed with error code 0
539 SEVERE Wed Dec 08 18:22:14 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Payterm_Ap' has completed with error code 0
540 SEVERE Wed Dec 08 18:22:14 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Bank_Branch_Name' has completed with error code 0
541 SEVERE Wed Dec 08 18:22:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Cust_Class' has completed with error code 0
542 SEVERE Wed Dec 08 18:22:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Uom_Code' has completed with error code 0
543 SEVERE Wed Dec 08 18:22:16 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_CostCenter' has completed with error code 0
544 SEVERE Wed Dec 08 18:22:16 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_UserDimension_Full' has completed with error code 0
545 SEVERE Wed Dec 08 18:22:27 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Supplier_Payment_Method' has completed with error code 0
546 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010 Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Payterm_Ap
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [8.6.1 HotFix11], build [457.0505], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Wed Dec 08 18:23:43 2010
Connected to Integration Service: [Oracle_BI_DW_Base_Intergration_Service].
Integration Service status: [Running]
Integration Service startup time: [Wed Dec 08 17:05:35 2010]
Integration Service current time: [Wed Dec 08 18:23:46 2010]
Folder: [SDE_ORAR1211_Adaptor]
Workflow: [SDE_ORA_CodeDimension_Payterm_Ap] version [1].
Workflow run status: [Failed]
Workflow run error code: [36331]
Workflow run error message: [WARNING: Session task instance [SDE_ORA_CodeDimension_Payterm_Ap] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_CodeDimension_Payterm_Ap] will be failed.]
Workflow run id [103].
Start time: [Wed Dec 08 18:22:13 2010]
End time: [Wed Dec 08 18:23:38 2010]
Workflow log file: [F:\Informatica\PowerCenter8.6.1\server\infa_shared\WorkflowLogs\SDE_ORA_CodeDimension_Payterm_Ap.log]
Workflow run type: [User request]
Run workflow as user: [Administrator]
Run workflow with Impersonated OSProfile in domain: []
Integration Service: [Oracle_BI_DW_Base_Intergration_Service]
Disconnecting from Integration Service
Completed at Wed Dec 08 18:23:46 2010
=====================================
ERROR OUTPUT
=====================================
547 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010 Could not attach to workflow because of errorCode 36331 For workflow SDE_ORA_CodeDimension_Payterm_Ap
548 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Payterm_Ap:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Payterm_Ap
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
=====================================
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:469)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
com.siebel.etl.engine.core.Session.run(Session.java:3246)
java.lang.Thread.run(Thread.java:619)
::: CAUSE :::
MESSAGE:::Execution of child batch Informatica Session Batch failed.
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.FailedTaskException
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:340)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
com.siebel.etl.engine.core.Session.run(Session.java:3246)
java.lang.Thread.run(Thread.java:619)
954 SEVERE Wed Dec 08 18:31:34 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_DeriveRange.txt SDE_ORA_Stage_ValueSetHier_DeriveRange
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
955 SEVERE Wed Dec 08 18:32:25 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SILOS.SIL_GLLinkageInformationGeneral_Full.txt SIL_GLLinkageInformationGeneral_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
956 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 ETL seems to have completed. Invoking shut down dispatcher after the notification from the last running task.
957 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Finishing ETL Process.
958 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 MESSAGE:::Some steps failed.
EXCEPTION CLASS::: com.siebel.etl.engine.bore.SomeSessionsFailedException
com.siebel.etl.engine.bore.NewDispatcher.execute(NewDispatcher.java:302)
com.siebel.etl.engine.bore.NewDispatcher.run(NewDispatcher.java:121)
java.lang.Thread.run(Thread.java:619)
959 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Dispatcher thread completed.
960 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Number of incomplete tasks whose status got updated to stopped :0
Number of incomplete task details whose status got updated to stopped :2630
961 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
* CLOSING THE CONNECTION POOL DataWarehouse
962 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
* CLOSING THE CONNECTION POOL ORA_R1211
963 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
END OF ETL
-------------------------------------------- -
Have 2 host cluster as part of infrastructure adding to VMM.
Added cluster server. 1st had no issue and has picked up it's VMs. Second gave this error below:
Error (416)
Agent installation timed out while waiting on service VMMAgentInstaller on host02domain.private.
Recommended Action
Ensure that the Windows Installer service is running on host02.domain.private and try the operation again.
Sure the Windows Installer has nothing to do with this but in case I manually started it on the server without issue.
On retrying first without starting Windows Installer manually and then doing so in both instances I get:
Error (2912)
An internal error has occurred trying to contact the host02.domain.private server: : .
WinRM: URL: [http://host02.domain.private:5985], Verb: [INVOKE], Method: [GetVirtualizationStatus], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/scvmm/AgentManagement]
An instance of the service is already running (0x80070420)
Recommended Action
Check that WS-Management service is installed and running on server host02.domain.private. For more information use the command "winrm helpmsg hresult". If host02.domain.private is a host/library/update server or a PXE server role then ensure
that VMM agent is installed and running. Refer to http://support.microsoft.com/kb/2742275 for more details.
I've tried killing the VMM Agent running on the host (which is running now after the attempted deploy) and rerunning - as the second error indicates it can't run because it's already running (far as I can figure). But even though it takes longer to run then
it still fails with exactly the same error.
I've checked the host and winrm shows as already running and already set up for remote management.
Am I missing something?Hi Allister,
What is the version of SCVMM ?
Did you follow the document ?
As for VMM 2008R2 ：
"On the Select Host Servers page, in the Computer name box, type either the name of the cluster or the name of any node in the cluster, and then click
Add."
"Do not skip Active Directory name verification. If you do, the wizard will add the host as a stand-alone host instead of discovering the cluster nodes "
"When you specify the name of a failover cluster that was created in Windows Server 2008 or Windows Server 2008 R2, or you specify a node in one of these clusters, the Add Hosts Wizard discovers all nodes in the cluster and adds
them to VMM. "
https://technet.microsoft.com/en-us/library/ee236431.aspx
Also 2012 ：
https://technet.microsoft.com/en-us/library/gg610648.aspx
For your case , I would suggest you to stop VMM service and remove the added cluster from
scvmm then follow the article and add cluster again .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
SBO_Backup Service is not Running In SAP Business one 8.8
Hi Experts,
Here We have Recently Upgraded from SAP Business one 2007 to SAP Business one 8.8.
Previously the SBO_Backup service In Server Tools was running proberly,
But after Upgrade the Backup service is not running .
Kindly Give us your value solutions..
Regards,
M.SenthilnathanHi,
I Am Using Windows Server 2003 Small business Server edition.
I have checked Ur solutions.
Am running Server tools in Administrator Login only with Full Permissions.
The License manager and DI server is running Only The SBO_Backup service is not Running!!!
Regards,
M.Senthilnathan -
OSB sbconsole "Test Console" service is not running
Hi all,
A problem in the osb domain sbconsole I am facing during testing of proxy/business services. When clicking on the "Launch Test Console" icon I got following error:
Error Accessing Test Configuration
"Test Console" service is not running. Contact administrator to start this service.
I have checked the test-console flag as true in ALSBdebug.xml file in all admin and managed servers. Still I am not able to test the service through sbconsole. All the servers are in OK state
Please help.
regards
Mohit SharmaCluster address should be comma-separated address of managed servers. For e.g. - If managed_server1 is listening on host:8011 and managed_server2 is listening on host:8013 then cluster address should be like host:8011,host:8013
You may refer section "Cluster Address" at below link -
http://download.oracle.com/docs/cd/E17904_01/web.1111/e13709/setup.htm#i717132
Regards,
Anuj -
Report Subscription by email error - The SQL Agent service is not running
Hello All,
This may be an easy answer, so please excuse my ignorance if I am overlooking something simple. I a simply trying to setup Report Subscriptions to be emailed to me. We currently have essentially 3 servers in use in our environment - a CAS, a Site server
and a SQL 2012.
I have configured the email settings in Reporting Services Configuration Manager on the Site server and was finally able to see the email option in the Create Subscription Wizard, but it errors out with:
System.Web.Services.Protocols.SoapException: The SQL Agent service is not running. This operation requires the SQL Agent service. ---> Microsoft.ReportingServices.Diagnostics.Utilities.SchedulerNotRespondingException: The SQL Agent service is not running.
This operation requires the SQL Agent service. at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateSubscription(String Report, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String
Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters, Guid batchId, String& SubscriptionID) at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateSubscription(String Report, ExtensionSettings
ExtensionSettings, String Description, String EventType, String MatchData, ParameterValue[] Parameters, String& SubscriptionID)
We do not have SQL installed locally, therefore it makes sense that the Agent service is not running. How do I subscribe to alerts in SCCM without a local installation of SQL?
-BradI am positive - see screenshots below of services on the SQL server:
Yes, reports work perfectly otherwise... Just cannot subscribe.
-Brad -
The report server service is not running on Reporting Service Point server
Hi,
I have encountered a problem, my reporting service point has stopped working. (SCCM 2012 R2)
In srsrp.log:
Check state SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Check server health. SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Successfully created srsserver SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Reporting Services URL from Registry [https://s-hub-sql1.domain.local/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
The request failed with HTTP status 404: Not Found.
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
(!) SRS not detected as running SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Failures reported during periodic health check by the SRS Server S-HUB-SQL1.domain.local.
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
Registry change SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Timed Out... SMS_SRS_REPORTING_POINT
12/15/2014 5:49:54 AM 3152 (0x0C50)
Set configuration SMS_SRS_REPORTING_POINT
12/15/2014 5:49:54 AM 3152 (0x0C50)
In windows event log:
On 12/15/2014 6:39:28 PM, component SMS_SRS_REPORTING_POINT on computer S-HUB-SQL1 reported: The report server service is not running on Reporting Service Point server "S-HUB-SQL1"; start the service to enable reporting.
In configuration manager service manager, the service sms_srs_reporting_point is running.
In Reporting services configuration manager, the service is running.
If I restart the reporting service, it doesn't helps.
What is not properly?I've already found the reason why all stopped working - someone deleted the report manager URL HTTPS bindings (in Report services configuration manager). Added it back, than reporting started to work. Awww!
-
Service Oriented workflow with items from customer
Dear Friends,
In SAP Business One how to handle the Service oriented workflow, which contains items from the customers? E.g. Electronic items repairing.Hi,
Step1:Create a item master in the name of service,decide whether it has to be maintained as inventory item or not from the companys accounting person.
Step2:You can use AR invoice(Item type) where you can include the items used for repairing along with the service item created in the above step1.
Maintaining Inventory of the items (for repairing) received from the customer as well as the items required for the repairing jobs
Step3:As you have mentioned that the you are maintaining the item received from the customer,confirm with companys accounting person whether it also has to be maintained as inventory item or not.
Step4:You can use goods receipt for getting the items from the customer
Note:Its depends upon your requirement whether to use sales bom or not as suggested by one of the forum member -
Agent and TNSListener service can not run when system starting
The Agent and TNSListener services can not run automaticaly when system startes.If run Agent service by hand in control panel,system prompt 3221356559 error message.If run TNSListener service in control panel,system prompt none.But after refresh,TNSListener service is not running.How can i do next?Thanks very much!
geno.nullfree wrote:
I'm not sure but since it's saying there's a library issue, you could try running:
# ldconfig
Failing that you could try a:
# pacman -Rns slim
# pacman -Syu slim
I tried both "ldconfig" and "pacman -XXX", but the problem is still there.
Maybe I need use another way to recompile slim in my machine.
But I have no time to test it now, I will try it another day.
Thx for replies. -
Alert: [LYNC] 'Lync Server Web Conferencing' NT Service is not running.
We keep getting this below Alert and everytime this happens, Conferencing would disconnect and connect back again. Current setup as below. We are on latest CU November 2014.
Server 2013 Pools - 2 pools
Each Pool has 5 front end servers with 2 back end servers mirrored.
Unable to find anything from best analyser, Ports have been validated. Any idea how to resolve this ?
Alert: [LYNC] 'Lync Server Web Conferencing' NT Service is not running.
Source: LS Data Conferencing Component [FE Server]
Path: FE Server
Last modified by: System
Last modified time: 11/24/2014 9:41:23 AM Alert description: 'Lync Server Web Conferencing (RTCDATAMCU)' NT Service is not running. To restart the service, run 'net start RTCDATAMCU' from a command-line window.
Whenever above alert is triggered, there is a corresponding application alert as below.
.Net runtime
Application: DataMCUSvc.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an internal error in the .NET Runtime at IP 00007FFAC2A91020 (00007FFAC2A90000) with exit code 80131506.
Application Error
Faulting application name: DataMCUSvc.exe, version: 5.0.8308.0, time stamp: 0x5050e3de
Faulting module name: clr.dll, version: 4.0.30319.34014, time stamp: 0x52e0b86c
Exception code: 0xc0000005
Fault offset: 0x0000000000001020
Faulting process id: 0x303c
Faulting application start time: 0x01d00621fefd0760
Faulting application path: C:\Program Files\Microsoft Lync Server 2013\Web Conferencing\DataMCUSvc.exe
Faulting module path: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll
Report Id: ca360fe4-73e7-11e4-80ca-001b21bfd144
Faulting package full name:
Faulting package-relative application ID:Hi,
Did the issue also happen before updating to the latest CU?
Please make sure you have installed the latest service pack for the Microsoft .NET Framework
Please try to change part of Lync service to start as “Automatic (Delayed Start)”, restart FE Servers and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Managed Service Accounts to run SQL Server Service
Has anyone played around with using managed service accounts for running the SQL Server Service? I am on a forest functional level of 2008R2 and was thinking about how cool it would be to use those for SQL Server. Unfortunately, I hear that it's not supported
by Microsoft and yet I've read about people doing that but would like to know if anyone has first hand experience. Otherwise, if not recommended, I'll stick to the old fashioned way of creating typical user accounts. Thanks in advance!Hi Scott hi Sean
I see that my first answer was badly phrased.
Let me try to make it more clear:
Managed Service Accounts(MSA):
Works with Kerberos including Delegation, but:
NOT working with cluster nodes
NOT working for load balancing using Kerberos
More information:
http://blogs.technet.com/b/askds/archive/2009/09/10/managed-service-accounts-understanding-implementing-best-practices-and-troubleshooting.aspx
Group Managed Service Accounts (GMSA):
Works with Kerberos including Delegation, but:
NOT supported with Failover Clustered Instances
Here is the connect item:
http://connect.microsoft.com/SQLServer/feedback/details/767211/gmsa-for-sql-server-failover-clusters
@all Please feel free to vote(!). I am waiting for this as well.
This is the state of my information today. Feel free to correct me if you know of any changes.
Andreas Wolter (Blog |
Twitter)
MCM - Microsoft Certified Master SQL Server 2008
MCSM - Microsoft Certified Solutions Master Data Platform, SQL Server 2012
www.andreas-wolter.com |
www.SarpedonQualityLab.com -
The audio service is not running
Yeah as the title says..my audio isn't working it tells me "The audio service is not running"..in my headphones no sound even on my speakers..What will I do? I went to the service button and when I did start to windows audio it told me "Windows
could not start the windows audio service on local computer Error 1068:The dependency service or group failed to start.Hi,
Find the related services and start them:
1. Click Start, type Services.msc in the Start Search box.
2. Scroll down the list of services, right-click Windows Audio
and select Start.
3. Select Properties for Windows Audio and set its Startup Type
to Automatic.
If the Windows Audio service does not start and you still get the error
Error 1068: The dependency service or group failed to start, then make sure that the following services are started and their
Startup Type is set to Automatic.
•Plug and Play
•Multimedia Class Scheduler
•Windows Audio Endpoint Builder
Karen Hu
TechNet Community Support
Maybe you are looking for
-
My iTunes is now saying cannot find file after uploading new iTunes update
After downloading the new iTunes update my iTunes is now saying it cannot find my music files???
-
Check-out Exclusive and Check-out Nonexclusive
Hi, When we check out a record exclusively or non-exclusively why is the 'Modify Join Permissions' option active(not disabled).According to my understanding,if we make check-out non-exclusive, without modifying join permission,all the other users mus
-
Inspection results for more than one lot
How do i see inspection results for different lots of the same material together in a single screen. Is there any standard report or query available in SAP? Prahlad
-
Problem with playlists iTunes 10.5.2
I downloaded the latest iTunes and noticed after downloading that the order of the songs on my playlists have completely changed, I know it seems like a minor problem but it's rather annoying especially when I have playlists with over 1000 songs with
-
Hi Experts, I am planning to take the BW 3.5 exam next month, and i was wondering if anyone that had taken the exam could give me tips on what areas to study for the BPS section of the exam, and how many questions actually covered the BPS portion. Th