Service sapdp00:Unknown
Can any body help me to get login into my sap server.
i am having 2 connections to login into our SAP.
one is reliance and another is leased line.
i can able to logging into our SAP Application through Reliance but not with leased line.
We are using SAP Application through SAP640.
when pinging the server ip address with both the networks i can able to reach my server. even though only one network is working as i told you before.
while i am trying to login SAP with leased line i am getting an error message given below.
Service 'sapdp00' unknow
Time : Monday
Component : NI (Network Interface)
Relese : 640
Version : 37
Module : ninti.c
Line : 505
Method : NIPGetServByName2 : service 'sapdp00' not found
Return Code : -3
System Call : getservbyname_r
Counter : 1
please anyone help me out to get login into My SAP with leased line.
Prakash Raju
Hi Prakash,
In your windows/winnt directory system32>drivers>etc> <b>services</b> file
The following are valid as defaults:
sapdp00 3200/tcp
sapdp99 3299/tcp
sapgw00 3300/tcp
sapgw99 3399/tcp
sapms<SID> starts from 3600/tcp
Before entering this take backup of <b>Services</b> file as <b>services.bak</b>
Regards,
Ganesh
****Reward points if Helpful*****
Similar Messages
-
Service 'sapdp00' unknown Return Code -91
Dear Expert:
After I finished SAProuter set up and tried to login with /H/218....../H/.
But prompt up an error.
Service 'sapdp00' unknown
Line 489
Method NiPGetServByName:service 'sapdp00' not found
Return Code -91
what's wrong???
and below is the SAProuter's dev_rout log file
NI-ROUTER LOOP ********
NiIRead: hdl 1 received data (rcd=66,pac=1,MESG_IO)
NiSelISelectInt: 1 handles selected (1 buffered)
DATA from C1/-1 (ms3.loyal.com.tw) received
NiRClientHandle: route received
executing NiRExRouteCon
NiRRouteRepl: copying input to route and replacing name
C1/-1 has NI-layer-version 39
NiBufIRouteToTable result from total 2 entries:
hostname /service
59.120.10.238 /
10.8.90.212 /sapdp00 < next
NiHsLGetServNo: found service name 'sapdp00' in cache
NiHsLGetServNo: retrying to get port number for 'sapdp00'
***LOG Q0I=> NiPGetServByName: service 'sapdp00' not found: getservbyname [ninti.c 489]
NiHsLGetServNo: service name 'sapdp00' not found by operating system
ERROR => NiRExRouteCon: NiBufIRouteGetNext failed (rc=-3) [nirout.cpp 2677]
ERROR => NiRClientHandle: NiRExRouteCon for C1/-1 'ms3.loyal.com.tw' failed (rc=-3) [nirout.cpp 2243]
NiBufISendErr: send ni-error rc -91 to hdl 1
NiIWrite: hdl 1 sent data (wrt=263,pac=1,MESG_IO)
NiRCloseConn: closing C1/-1
NiICloseHandle: shutdown and close hdl 1 / sock 800
NI-ROUTER LOOP ********
Tue Dec 01 17:52:10 2009
NiSelISelectInt: 0 handles selected (0 buffered)
NI-ROUTER LOOP ********
Please Help~
Thank you very much~
Regards
Jack LeeHi,
check your services file for service sapdp00 /32<sys nr>/tcp
looks like it's missing
Mark -
Please help me: i got this error - service 'sapdp00' uknown
Hi friends,
I'm trying to log on with SAP, and after i do double click in a system using sap logon, an error occurs:
service 'sapdbp00' unknown
time xxxx
component NI(network interface)
realease 640
version 37
module ninti.c
line 494
method NipGetServByName2: service 'sapdp00' not
found
return code -3
system call getservbyname_r
counter 1
I don't know what could be happend.
Could you please help me?
I review th files: host and services in C:\WINDOWS\system32\drivers\etc
And the service exist:
sapdp00 3200/tcp
Regards!!!
Thanks!!!
Albio.-
Message was edited by: Albio VivasHi Jose,
I execute that command and this is the output:
C:\>niping -v -S sapdp00
Hostname/Hostaddr verification:
===============================
Hostname of local computer: amvivas (NiMyHostName)
Lookup of hostname: amvivas (NiHostToAddr)
--> IP-Addr.: xxx.xx.12.41
Lookup of IP-Addr.: xxx.xx.12.41 (NiAddrToHost)
--> Hostname: amvivas
Lookup of hostname: localhost (NiHostToAddr)
--> IP-Addr.: 127.0.0.1
Lookup of IP-Addr.: 127.0.0.1 (NiAddrToHost)
--> Hostname: localhost
Lookup of IP-Addr.: 127.0.0.1 (NiAddrToHostCanon)
--> Hostname: localhost
Servicename/Serviceport verification:
=======================================
Lookup of service: sapdp00 (NiServToNo)
Thu Apr 06 07:39:10 2006
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, NiPServToNo ( sapdp00) [nixxi.c 2624]
--> **** FAILED ****
What could this mean?
Thanks,
Albio -
Event Log stopped working - Error 1747 : The Authentication Service is Unknown
I reccently noticed that my scheduled tasks were no longer running. I tried to bring up the task scheduler and it said the service was not running. I checked the service and sure enough, it was not running. I tried to start it and it failed because the windows event log service, which is a dependency, was also not running. I tried to start the event log service, and gave the error above in the subject line.
The event log service uses a log on of "Local Service". There are other services that use the same log on and they start up with no problem. I have searched the internet for a solution to this and have tried several things I found with no luck. One was to run SFC, another was to delete the Windows/Logs and Windows/System32/Logfiles folders so they would be re-created on startup. I also tried subinacl to reset the ACLs on registry branches and the subfolders of %SystemDrive% as recommeded in another forum.
I am running Vista Home Premium and all the latest updates have neen applied. Anyone have any further ideas? (short of re-installing Vista).
Thanks.Hi there Robin. I am an IT Technician & felt that I needed to begin communication with you regarding this issue. I recently made a post in this thread detailing my issues & found resolution. I just wanted to share my post with you & hope that the information is useful to others that need to resolve these issues without re-installing their operating systems. Please find my post below:
Hi all. I am an IT technician & have recently been troubleshooting a customer's Windows Vista Home Premium laptop in a wireless home network.
In a nutshell the laptop suddenly stopped connecting to the wireless router; upon investigation I found lots of windows services were not starting; this sent me on a bit of a wild goose chase as this showed all signs of some kind of trojan / malware infection hogging the system. Here are some of the things I saw:
1). Norton 360 wasn't even running correctly & I was unable to view it's firewall status.
2). Windows firewall was disabled & I was unable to start it (service failed error message).
3). I was unable to view windows event logs & received "Error 1747 : The Authentication Service is Unknown"
4). Windows Side Bar was all blanked out & not showing any gadgets
5). I attempted a system restore but that failed (I saw references in system restore that the Bonjour service had been un-installed)
I did loads of further investigation & found this thread. It would appear that removing, or even trying to remove / un-install the Bonjour service may cause the above mentioned issues in windows Vista. I have not seen this kind of errata in windows XP.
I have heard of people pulling their hair out & re-installing the operating system possibly due to experiencing these issues.
Please Read On....
Resolution that worked for me:
I ran the Winsock corruption fix that is mentioned in previous threads as per microsoft's instructions found at the following URL: http://support.microsoft.com/kb/811259
Manual steps to recover from Winsock2 corruption for Windows Vista users
Winsock corruption can cause connectivity problems. To resolve this issue by using Network Diagnostics in Windows Vista, follow these steps:
1.
Click , and then click Network.
2.
Click Network and Sharing Center.
3.
In the Network and Sharing Center box, click Diagnose and Repair.
Note You may also access the Network and Sharing Center in Control Panel.
If the Network and Diagnostic tool was unable to find a problem, you can manually repair or reset Winsock.
Manual steps to repair or to reset Winsock for Windows Vista users
1.
Click , type cmd in the Start Search box, right-click cmd.exe, click Run as administrator, and then press Continue.
2.
Type netsh winsock reset at the command prompt, and then press ENTER.
Note If the command is typed incorrectly, you will receive an error message. Type the command again. When the command is completed successfully, a confirmation appears, followed by a new command prompt. Then, go to step 3.
3.
Type exit, and then press ENTER
Hey Presto!!!! After re-booting everything is back online & all necessary windows services & norton 360 are starting as normal.
Further Information on Bonjour Service:
http://en.wikipedia.org/wiki/Bonjour_(software)
As I understand & in my experience the Bonjour service is installed as a sub-aplet with certain 3rd party software applications including Apples itunes & Adobe newest Creative Suite 3 installs Apple’s Bonjour service even if you don’t install Version Cue. Its main goal is to provide zero-configuration connectivity between Version Cue server and the suite’s applications.
A bit more CSi & i've established how to un-install Bonjour service; there is a great topic on this subject at the following URL: http://www.raymond.cc/blog/archives/2008/02/10/how-to-uninstall-or-remove-bonjour-mdnsresponderexe/
Thanks to all for your post & input...it has really helped to get this issue resolved (well for me anyway) & has of course save a re-install!!!!
I will keep an eye on this thread...please post your resolutions / experiences to help others.
Kind regards -
Problem connecting to DB service sapdp00
Hello, i installed Sneak preview for NetWeaver on Windows Server 2003. Data base looks ok. Console root looks ok, and shows NSP active(green). I installed locally on server 2003. Loopback is installed. I cant reach the sapdp00. i get a " partner not reached(host 10.10.0.10, service sapdp00).
Can someone help me as of where to look ? As a Senior abaper, this is the first time i install SAP on a server.
Thanks !Hi ,
Check if the database server is up and running.The console will have two root nodes .R they both in green?
Try connecting and entering into the database externally.
Generally if the DB instance is not running , this error would occur.
regards,
aravindh. -
Hi,
we are migrating from EP620 to EP640 and having trouble to get the MSS running. We transported the system-landscape-settings to the new portal, but now we get an error when displaying the mss-iViews:
Connect to SAP gateway failed
Connect_PM
TYPE=A
ASHOST=abc.xyz.cc
SYSNR=20
GWHOST=abc.xyz.cc
GWSERV=sapgw20
PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR service '?' unknown
TIME Mon Feb 13 13:26:24 2006
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -3
COUNTER 2
Can anyone tell me, where to configure the service which is obviously unknown?
Thanks and regards
JanHi Krishna,
yes, the problem was, that I did not specify the service in the "services" file of the machine the portal was running on. There are a lot of positngs in this forum explaining this matter, for example here:
service '' unknown
Thanks and regards,
Jan -
I am a beginner on SAP R/3 .
my laptop configuration is: windows xp média center
1.86Ghz 1G de Ram 80G de HDD.
I have installed all those thing -Full download includes SAPGUI (2 files 1.5GB, 1.25GB)
-Download SAPGUI only! (342 MB)
- Installation Guide (PDF 1.32 MB)
my laptop is not connected to a Lan;when I try to launch my first connexion on
sap with a user account I have the following message:
erreur:sapgui640
partner not reached(host 127.0.0.1 service sapdp00)
wsaeconnrefused:connection refused
thanks in advance for your helpHi,
Have you installed MS Loopback Adapter? If not do so. You need it, if you are not connected to a LAN. For instructions how to install and cofigure it have a look at install help which is included in the dowload.
Regards
Daniel -
Sapgui error service sapdp00 timed out
Hi,
I am getting Sapgui error " connection to host ....,service sapdp00 timed out" when connecting to a remote sap system over internet. Earlier i could connect to the system without any problems. I am connecting to Internet thru a wireless network-cable connection & firewall is disabled. Recenly i configured home network(workgroup configuration) for file sharing with another system, after this configuration Sapgui is giving this error. I tried different ways but in vain. Can anybody help me regarding this.
Thanks
Pavan.Hi All,
I'm having the same error and I don't find any information on the internet to solve this issue. -
hi everybody does someone can help to fix this matter.When I try to launch
my Saplogon I have got this error msg
connection to host 10.10.0.10
service sapdp00 timed out
Component: NI (network interface)
release:640
version:37
module:nixxi_r.cpp
line:1078
method:Nipconnect
return Code -12
counter 1
thanks in advance for your help
P.S. I am a beginner on Sapopen "services"-file on C:\WINDOWS\system32\drivers\etc\
add following entry for dispatcher:
sapdp<InstanceNumber> 32<InstanceNumbger>/tcp
sample:
sapdp00 3200/tcp
add following entry for message server:
sapms<SID> 32<InstanceNumber>/tcp
sample:
sapmsC01 3200/tcp -
Service 'sapgw53' unknown / CPI-C error CM_PRODUCT
Hi SAP Gurus,
I am trying to create RFC destination in 46d system and while testing the connection I am getting following error message. Pl. help mein resolving the issue. I have created the RFC destination successfully from one system to this system. But gettin this error while creating RFC in this system.
"service 'sapgw53' unknown / CPI-C error CM_PRODUCT"
Following are the details
ERROR service 'sapgw53' unknown
LOCATION SAP-Gateway on host nlaslt12 / sapgw01
DETAIL NiIServToAddr
COMPONENT NI (network interface)
COUNTER 59493
MODULE nixxi.c
LINE 2338
RETURN CODE -3
SUBRC 0
RELEASE 46D
TIME Fri Dec 14 14:53:42 2007
VERSION 34
thanx,
RohitHi Juan,
Actually I am creating RFC for the IDOC-to-IDOC between two systems. On one system I have created RFC connection (Destination) pointing to this server which is working fine. But when I am creating RFC on this system pointing to the other system it is throwing this error.
Also Pl. let me know how can I check the service file for the entry and if not found how can I create that bcos I don't hv access to the OS (HP UX) on which I am creating the RFC connection.
Thanx and Regards,
Rohit -
Service '?' unknown TIME
Hi
While testing JCO connections I get the following error even after making proper entries on the services file
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=ids GROUP=PUBLIC R3NAME=IDS MSSERV=sapmsIDS PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR service '?' unknown TIME Fri Apr 06 14:49:06 2007 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -3 COUNTER 1
Could some one please help me with this.....Make sure System (Alias) is correctly configured. Test it, to make sure.
-
Service 'sapgw16' unknown / CPI-C error CM_PRODUCT
Hi folks,
I am running an upload from R/3 into BW (various infosources, amongst other COPA), the load hangs after a while in the monitor with a yellow traffic light and turns then into red with a time out.
I had a look at sm58 in the OLTP and got the following error message:
service 'sapgw16' unknown / CPI-C error CM_PRODUCT
Could anybody let me know what to do?
Regards, ThomasHi Juan,
Actually I am creating RFC for the IDOC-to-IDOC between two systems. On one system I have created RFC connection (Destination) pointing to this server which is working fine. But when I am creating RFC on this system pointing to the other system it is throwing this error.
Also Pl. let me know how can I check the service file for the entry and if not found how can I create that bcos I don't hv access to the OS (HP UX) on which I am creating the RFC connection.
Thanx and Regards,
Rohit -
Ultra 60 NOQUEUE: SYSERR(root): service "smtp" unknown: Not enough space
Halo,
My Ultra 60 keep on rebooting to ok prompt itself. Log file in /var/adm/messages showing as below:
The code 245 can be vary, it also showing 247...etc
Any idea?
sendmail[245]: NOQUEUE: SYSERR(root): service "smtp" unknown: Not enough space
Thanks,
BR,
Jackhi Gerdts,
I try as what you said to generate the crash dump but i can not find any files in the /var/crash/ and no such directory was generated.
Could it be dumping somewhere other than var/crash? I try to create the var/crash folder manually but still not able to get it
{2} ok sync
panic[cpu2]/thread=0x6153a9a0: zero
syncing file systems... done
8283 static and sysmap kernel pages
36 dynamic kernel data pages
195 kernel-pageable pages
0 segkmap kernel pages
0 segvn kernel pages
0 current user process pages
8514 total pages (8514 chunks)
dumping to vp 61062554, offset 1913368
8514 total pages, dump succeeded
rebooting...
Resetting ...
thanks,
btw, forget to mention this is SunOS 5.6
Edited by: 994409 on Apr 8, 2013 6:50 PM -
Supplementary service error: Unknown Alphabet
Hi guys,
I have Blackberry storm 9530. I have received after every call the below message:
"Supplementary service error: Unknown Alphabet"
I do not know why I receive this message. I rebooted the mobile more times and still have the problem.
Can you help me please?
My carrier is: Vodafone
ThanksHello amerkotb,
Welcome to the forums.
In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
Link: http://www.blackberry.com/btsc/KB03621
Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
Hope this helps. Have a good day.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
hi gurus,
we installed 2 instances of BI7 on one host both working fine on oracle10.2 & windows 2003 server.
1st one is BID for BI Development server instance no- 00 &
2nd one is BIP for BI Production server instance no.- 05
now I am configuring RFC BID to R/3 Dev
BIP to R/3 PRD
R/3 DEV & PROD is on seperate servers
all requirments for both are fulfilled like logical system, ALEREMOTE & BWREMOTE Users for remote logon with correct Authorizations etc.
Now I RFC test connection is working for BID - Bi devlopment instance & R/3 DEV
When I try to RFC test connection on BID BI - Development instance it's running but remote connection does not respond, even not getting any error.
then I try RFC test connection on R/3 production server with instance no. 05 it was giving ERROR:
ERROR: Service 'sapgw05' unknown
Location: SAP - Gateway on host sapgrp / sapgw00
Detail : NIPGetservByName: service 'sapgw05' not found
CALL: Getserv by name
but when I check it with instance 00 test connection is ok
At the time of installation BID instance I configured Local SLD & For BIP instance I Used configure in current SLD Where I used Gateway instance 00.
tell me exact solution for this.
Regards,
Darshan..> the maybe you must restart the sap instance.
Or use
- SM51
- Goto - Hostnamebuffer - Reset - Entire system
This will also invalidate the services cache.
Markus
Maybe you are looking for
-
Hi All, How to handle between in Case? (case emp_type * when between 1 and 3 then '01'* * when between 2 and 4 then '04'* * when between 4 and 5 then '05'* * end* above statement is giving error. one way is: (case emp_type when emp_type between 1 and
-
The Printer seems to work correctly, but the page is almost blank. The only exceptions are a few faint characters, and sometimes a light line down the side of the page. Can you please help? The printer has not had much mileage. Thanks, Ross
-
Default file association & audio output settings in Audition
I get so tired of having to adjust the 'default player' for my audio files. I'd prefer everything to play in WINDOWS MEDIA PLAYER and have that set as such. But, I guess my HP PC and/or Audition causes them to switch quite often. I don't see that se
-
SBO_SP_Transaction Notification question.
Scenario: When a user add a Sales Order without putting in Customer Ref No, an error messages should be displayed and the process stops. This only happens to customer where in BP Properties 3 is ticked, ie QryGroup3='Y'. Problem: I have included th
-
Font Book "Quit Unexpectedly". Have Error Report.
Hey all! Thanks for checking this out and for any help you may have to offer. When opening Font Book the application bounces in the dock, disappears, then I get the following error report: Date/Time: 2007-07-16 09:38:41.913 -1000 OS Version: 10.4.10