Service 'sapgw53' unknown / CPI-C error CM_PRODUCT

Hi SAP Gurus,
I am trying to create RFC destination in 46d system and while testing the connection I am getting following error message. Pl. help mein resolving the issue. I have created the RFC destination successfully from one system to this system. But gettin this error while creating RFC in this system.
"service 'sapgw53' unknown / CPI-C error CM_PRODUCT"
Following are the details
ERROR                service 'sapgw53' unknown
LOCATION             SAP-Gateway on host nlaslt12 / sapgw01
DETAIL               NiIServToAddr
COMPONENT            NI (network interface)
COUNTER              59493
MODULE               nixxi.c
LINE                 2338
RETURN CODE          -3
SUBRC                    0
RELEASE              46D
TIME                 Fri Dec 14 14:53:42 2007
VERSION              34
thanx,
Rohit

Hi Juan,
Actually I am creating RFC for the IDOC-to-IDOC between two systems. On one system I have created RFC connection (Destination) pointing to this server which is working fine. But when I am creating RFC on this system pointing to the other system it is throwing this error.
Also Pl. let me know how can I check the service file for the entry and if not found how can I create that bcos I don't hv access to the OS (HP UX) on which I am creating the RFC connection.
Thanx and Regards,
Rohit

Similar Messages

Service 'sapgw16' unknown / CPI-C error CM_PRODUCT

Hi folks,
I am running an upload from R/3 into BW (various infosources, amongst other COPA), the load hangs after a while in the monitor with a yellow traffic light and turns then into red with a time out.
I had a look at sm58 in the OLTP and got the following error message:
service 'sapgw16' unknown / CPI-C error CM_PRODUCT
Could anybody let me know what to do?
Regards, Thomas

Hi Juan,
Actually I am creating RFC for the IDOC-to-IDOC between two systems. On one system I have created RFC connection (Destination) pointing to this server which is working fine. But when I am creating RFC on this system pointing to the other system it is throwing this error.
Also Pl. let me know how can I check the service file for the entry and if not found how can I create that bcos I don't hv access to the OS (HP UX) on which I am creating the RFC connection.
Thanx and Regards,
Rohit

STMS error hostname 'atltu1' unknown / CPI-C error CM_PRODUCT_SPECIFIC_ERRO

Hi,
We are on SAP 4.6c and AIX unix . Our environment is a three system landscape where PRD have 4 dilaog instances
My problem is -
I cannot look at the import queue of the quality system when I logged on to the dialog instances. when I am on Central instance I can logon to the import queue of the quality system
when I double click quality system being in any of the dialog instance, this is the error I get
RFC communications error with system/dest
[email protected]_DU1
hostname 'atltu1' unknown / CPI-C error
CM_PRODUCT_SPECIFIC_ERROR.
Please help me what could be the possible reason

The you are probably using DNS as name resolve service (instead of having a hosts file).
check the content of /etc/resolv.conf on your CI, if it has an entry like
hosts: dns files
then DNS is used to resolve the name.
If server A finds B that doesn't mean B finds A. The name resolution is done on the calling system and if that is not correctly configured on B it won't find A although it works in the other direction (because the caller A can do name resolution correctly).
Markus

Event Log stopped working - Error 1747 : The Authentication Service is Unknown

I reccently noticed that my scheduled tasks were no longer running. I tried to bring up the task scheduler and it said the service was not running. I checked the service and sure enough, it was not running. I tried to start it and it failed because the windows event log service, which is a dependency, was also not running. I tried to start the event log service, and gave the error above in the subject line.
The event log service uses a log on of "Local Service". There are other services that use the same log on and they start up with no problem. I have searched the internet for a solution to this and have tried several things I found with no luck. One was to run SFC, another was to delete the Windows/Logs and Windows/System32/Logfiles folders so they would be re-created on startup. I also tried subinacl to reset the ACLs on registry branches and the subfolders of %SystemDrive% as recommeded in another forum.
I am running Vista Home Premium and all the latest updates have neen applied. Anyone have any further ideas? (short of re-installing Vista).
Thanks.

Hi there Robin. I am an IT Technician & felt that I needed to begin communication with you regarding this issue. I recently made a post in this thread detailing my issues & found resolution. I just wanted to share my post with you & hope that the information is useful to others that need to resolve these issues without re-installing their operating systems. Please find my post below:
Hi all. I am an IT technician & have recently been troubleshooting a customer's Windows Vista Home Premium laptop in a wireless home network.
In a nutshell the laptop suddenly stopped connecting to the wireless router; upon investigation I found lots of windows services were not starting; this sent me on a bit of a wild goose chase as this showed all signs of some kind of trojan / malware infection hogging the system. Here are some of the things I saw:
1). Norton 360 wasn't even running correctly & I was unable to view it's firewall status.
2). Windows firewall was disabled & I was unable to start it (service failed error message).
3). I was unable to view windows event logs & received "Error 1747 : The Authentication Service is Unknown"
4). Windows Side Bar was all blanked out & not showing any gadgets
5). I attempted a system restore but that failed (I saw references in system restore that the Bonjour service had been un-installed)
I did loads of further investigation & found this thread. It would appear that removing, or even trying to remove / un-install the Bonjour service may cause the above mentioned issues in windows Vista. I have not seen this kind of errata in windows XP.
I have heard of people pulling their hair out & re-installing the operating system possibly due to experiencing these issues.
Please Read On....
Resolution that worked for me:
I ran the Winsock corruption fix that is mentioned in previous threads as per microsoft's instructions found at the following URL: http://support.microsoft.com/kb/811259
Manual steps to recover from Winsock2 corruption for Windows Vista users
Winsock corruption can cause connectivity problems. To resolve this issue by using Network Diagnostics in Windows Vista, follow these steps:
1.
Click , and then click Network.
2.
Click Network and Sharing Center.
3.
In the Network and Sharing Center box, click Diagnose and Repair.
Note You may also access the Network and Sharing Center in Control Panel.
If the Network and Diagnostic tool was unable to find a problem, you can manually repair or reset Winsock.
Manual steps to repair or to reset Winsock for Windows Vista users
1.
Click , type cmd in the Start Search box, right-click cmd.exe, click Run as administrator, and then press Continue.
2.
Type netsh winsock reset at the command prompt, and then press ENTER.
Note If the command is typed incorrectly, you will receive an error message. Type the command again. When the command is completed successfully, a confirmation appears, followed by a new command prompt. Then, go to step 3.
3.
Type exit, and then press ENTER
Hey Presto!!!! After re-booting everything is back online & all necessary windows services & norton 360 are starting as normal.
Further Information on Bonjour Service:
http://en.wikipedia.org/wiki/Bonjour_(software)
As I understand & in my experience the Bonjour service is installed as a sub-aplet with certain 3rd party software applications including Apples itunes & Adobe newest Creative Suite 3 installs Apple’s Bonjour service even if you don’t install Version Cue. Its main goal is to provide zero-configuration connectivity between Version Cue server and the suite’s applications.
A bit more CSi & i've established how to un-install Bonjour service; there is a great topic on this subject at the following URL: http://www.raymond.cc/blog/archives/2008/02/10/how-to-uninstall-or-remove-bonjour-mdnsresponderexe/
Thanks to all for your post & input...it has really helped to get this issue resolved (well for me anyway) & has of course save a re-install!!!!
I will keep an eye on this thread...please post your resolutions / experiences to help others.
Kind regards

Help with error program not registered CPI-C error CM_ALLOCATE_FAILURE_RETR

I have the following connection error in SM59 ...
Connection error        program ZCCCOM_NZ_PMH01 not registered / CPI-C error CM_ALLOCATE_FAILURE_RETRY.
I have deleted and re-registered the program but still no connection. Any ideas as to what/where I am going wrong would be fantastic!!
RFC Destin = CCCOM
Type = T
Gateway Host = ntchsapqas
Gateway service = sapgw00
ERROR                program ZCCCOM_NZ_PMH01 not registered
LOCATION             SAP-Gateway on host ntchsapqas / sapgw00
DETAIL               TP ZCCCOM_NZ_PMH01 not registered
COMPONENT            SAP-Gateway
COUNTER              19364
MODULE               gwr3cpic.c
LINE                 1593
RETURN CODE          679
SUBRC                    0
RELEASE              46D
TIME                 Tue Jun 10 14:47:28 2008
VERSION              2

Something helpful related to this
The program in the above error should be registered in the gateway for this connection test to complete successfully. The server program rfcexec is responsible for its registration on the gateway.
To register the program login into the OS level as sudo su - <sid>adm and execute the following command.
rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
The connection will fail once this command is terminated or the user executing this command logs off
To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
To do this, execute the following command
sudo su - <sid>adm
rfcexec u2013D<destination name>
<destination name> is the RFC destination name in SM59
So now we are done with registering the server program, but how do we check it is registered, once a server program is registered it is displayed in the Logged on clients in SMGW.
In transaction SMGW choose GOTO-> Logged on clients. There should be an entry for the server program in the screen that is displayed with system type Registered_TP (which indicates that the program is registered)

Weblogic app server wsdl web service call with SSL Validation error = 16

Weblogic app server wsdl web service call with SSL Validation error = 16
I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
Cannot complete the certificate chain: No trusted cert found
Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
Validation error = 16
From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
Here is how I load trustStore and keyStore in my java program:
     System.setProperty("javax.net.ssl.trustStore",”cacerts”);
     System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
     System.setProperty("javax.net.ssl.trustStoreType","JKS");
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.keyStore", keyStoreName);
     System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd);      System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
Here is how I create cacerts using verisign hierarchy certs (in this order)
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
Because my program is a weblogic app server, when I start the program, I have java command line options set as:
-Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
-Dweblogic.security.SSL.ignoreHostnameVerification=true
-Dweblogic.security.SSL.enforceConstraints=strong
That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
1.     Do I create “cacerts” the correct order with right keeltool options?
2.     Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
3.     Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
4.     Do I need to put the “cacerts” to some specific weblogic directory?
---------------------------------wsdl file
<wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
     <wsp:Policy wsu:Id="TokenServices_policy">
          <wsp:ExactlyOne>
               <wsp:All>
                    <sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
                         <wsp:Policy>
                              <sp:TransportToken>
                                   <wsp:Policy>
                                        <sp:HttpsToken RequireClientCertificate="true"/>
                                   </wsp:Policy>
                              </sp:TransportToken>
                              <sp:AlgorithmSuite>
                                   <wsp:Policy>
                                        <sp:Basic256/>
                                   </wsp:Policy>
                              </sp:AlgorithmSuite>
                              <sp:Layout>
                                   <wsp:Policy>
                                        <sp:Strict/>
                                   </wsp:Policy>
                              </sp:Layout>
                         </wsp:Policy>
                    </sp:TransportBinding>
                    <wsaw:UsingAddressing/>
               </wsp:All>
          </wsp:ExactlyOne>
     </wsp:Policy>
     <wsdl:types>
          <xsd:schema targetNamespace="http://tempuri.org/Imports">
               <xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
               <xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
          </xsd:schema>
     </wsdl:types>
     <wsdl:message name="ITokenServices_GetUserToken_InputMessage">
          <wsdl:part name="parameters" element="tns:GetUserToken"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
          <wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
          <wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
          <wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
     </wsdl:message>
     <wsdl:portType name="ITokenServices">
          <wsdl:operation name="GetUserToken">
               <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
               <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
          </wsdl:operation>
          <wsdl:operation name="GetSSOUserToken">
               <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
               <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
          </wsdl:operation>
     </wsdl:portType>
     <wsdl:binding name="TokenServices" type="tns:ITokenServices">
          <wsp:PolicyReference URI="#TokenServices_policy"/>
          <soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
          <wsdl:operation name="GetUserToken">
               <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
               <wsdl:input>
                    <soap12:body use="literal"/>
               </wsdl:input>
               <wsdl:output>
                    <soap12:body use="literal"/>
               </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="GetSSOUserToken">
               <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
               <wsdl:input>
                    <soap12:body use="literal"/>
               </wsdl:input>
               <wsdl:output>
                    <soap12:body use="literal"/>
               </wsdl:output>
          </wsdl:operation>
     </wsdl:binding>
     <wsdl:service name="TokenServices">
          <wsdl:port name="TokenServices" binding="tns:TokenServices">
               <soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
               <wsa10:EndpointReference>
                    <wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
               </wsa10:EndpointReference>
          </wsdl:port>
     </wsdl:service>
</wsdl:definitions>
----------------------------------application log
adding as trusted cert:
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
adding as trusted cert:
Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
adding as trusted cert:
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
     at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
     at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
     at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
     at com.certicom.tls.record.WriteHandler.write(Unknown Source)
     at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
     at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
     at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
     at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
     at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
     at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
     at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
     at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
     at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
     at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
     at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
     at javax.xml.ws.Service.<init>(Service.java:56)
     at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
     at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
     at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
     at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
     at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
     at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
     at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
     at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
     at com.certicom.tls.record.WriteHandler.write(Unknown Source)
     at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
     at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
     at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
     at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
     at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
     at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
     at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
     at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
     at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
     at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
     at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
     at javax.xml.ws.Service.<init>(Service.java:56)
     at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
     at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
     at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
     at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
     at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>

I received a workaround by an internal message.
The how to guide is :
-Download the wsdl file (with bindings, not the one from ESR)
-Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
-Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
-Create a new logicial destination that point to the wsdl file modified
-Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
Then the received data is check by the metadata logical destination but the data is retrieved from the correct server.

Service '?' unknown

Hi,
we are migrating from EP620 to EP640 and having trouble to get the MSS running. We transported the system-landscape-settings to the new portal, but now we get an error when displaying the mss-iViews:
Connect to SAP gateway failed
Connect_PM
TYPE=A
ASHOST=abc.xyz.cc
SYSNR=20
GWHOST=abc.xyz.cc
GWSERV=sapgw20
PCS=1
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       service '?' unknown
TIME        Mon Feb 13 13:26:24 2006
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -3
COUNTER     2
Can anyone tell me, where to configure the service which is obviously unknown?
Thanks and regards
Jan

Hi Krishna,
yes, the problem was, that I did not specify the service in the "services" file of the machine the portal was running on. There are a lot of positngs in this forum explaining this matter, for example here:
service '' unknown
Thanks and regards,
Jan

CPI-C ERROR CM_PRODU while creating RFC destination from BW to R/3

hi,
i am trying to create connection between R/3 and BW and getting the error -
partner not reached/ CPI-C ERROR CM_PRODU.
could anybody plz. help.
thanks, sunil.

Hi,
I think is because the SAP gateway host is deactivated.
As per SAP notes, issue statement ping <IP address> (In this example:192.168.4.2) No reply: Boot SAP Gateway host required.
An answer:Check whether the TCP/IP port 33xx is open (where xx corresponds to the system number) and start the SAP gateway.
The TCP/IP port is also partially defined in the services file as an sapgw<SID> or sapgwxx entry (where xx corresponds to the system number). The services file is in the Windows directory or in WinNT/System32/drivers/etc.
Rgs
Antonino

Service '?' unknown TIME

Hi
While testing JCO connections I get the following error even after making proper entries on the services file
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=ids GROUP=PUBLIC R3NAME=IDS MSSERV=sapmsIDS PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR service '?' unknown TIME Fri Apr 06 14:49:06 2007 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -3 COUNTER 1
Could some one please help me with this.....

Make sure System (Alias) is correctly configured. Test it, to make sure.

Service 'sapdp00' unknown Return Code -91

Dear Expert:
After I finished SAProuter set up and tried to login with /H/218....../H/.
But prompt up an error.
Service 'sapdp00' unknown
Line 489
Method NiPGetServByName:service 'sapdp00' not found
Return Code -91
what's wrong???
and below is the SAProuter's dev_rout log file
NI-ROUTER LOOP ********
NiIRead: hdl 1 received data (rcd=66,pac=1,MESG_IO)
NiSelISelectInt: 1 handles selected (1 buffered)
DATA from C1/-1 (ms3.loyal.com.tw) received
NiRClientHandle: route received
executing NiRExRouteCon
NiRRouteRepl: copying input to route and replacing name
C1/-1 has NI-layer-version 39
NiBufIRouteToTable result from total 2 entries:
hostname            /service
59.120.10.238       /
10.8.90.212         /sapdp00                       < next
NiHsLGetServNo: found service name 'sapdp00' in cache
NiHsLGetServNo: retrying to get port number for 'sapdp00'
***LOG Q0I=> NiPGetServByName: service 'sapdp00' not found: getservbyname [ninti.c 489]
NiHsLGetServNo: service name 'sapdp00' not found by operating system
ERROR => NiRExRouteCon: NiBufIRouteGetNext failed (rc=-3) [nirout.cpp   2677]
ERROR => NiRClientHandle: NiRExRouteCon for C1/-1 'ms3.loyal.com.tw' failed (rc=-3) [nirout.cpp   2243]
NiBufISendErr: send ni-error rc -91 to hdl 1
NiIWrite: hdl 1 sent data (wrt=263,pac=1,MESG_IO)
NiRCloseConn: closing C1/-1
NiICloseHandle: shutdown and close hdl 1 / sock 800
NI-ROUTER LOOP ********
Tue Dec 01 17:52:10 2009
NiSelISelectInt: 0 handles selected (0 buffered)
NI-ROUTER LOOP ********
Please Help~
Thank you very much~
Regards
Jack Lee

Hi,
check your services file for service sapdp00     /32<sys nr>/tcp
looks like it's missing
Mark

Unknown Database Connector Error using Oracle stored procedures

We are using an Oracle database for the first time with our Crystal Reports, and I am attempting to modify a report to use a new stored procedure. When I attempt to add either the new procedure, or to add a new copy of the existing procedure, I get an error message:
Unknown Database Connector Error
If I remove the existing procedure first (leaving no database objects at all), and then attempt to add back exactly the same stored procedure that I just removed, I get a different error message:
Database Connector Error: '42000:[Oracle][ODBC]Syntax error or access violation'
Neither of these errors is particularly helpful. The stored procedure in question works as is. I can run it in SQL Developer, and it also executes within the existing report if I run it. Unfortunately, it needs to be modified and given a new name, so I need to be able to add the new stored procedure to the report.
The operating system is Windows XP Professional version 2002 SP3. The Oracle version is 11g (11.2.0.2.0). Crystal reports version is Crystal Reports 2008 (12.3.0.601). The stored procedure returns a refcursor. The ODBC connection is created using the "Oracle in OraClient11g_home1" driver. When I test the connection, it tells me it was successful.
If it matters, the report is a Saba report.
Can anyone shed any light on what the problem is and how to fix it. If the solution is to upgrade the Windows version, that is under the control of our tech support and there is no information available as to when it will happen.

Yes - I had used the Set Datasource Location to point to the correct ODBC connection. I get the same results with an existing report as I do with a new blank report.
I have no idea where the service market place is. Honestly, I find the entire SAP site confusing. I found one reference to the PAM guide, but when I clicked on it, it insisted on a userid/password, and apparently the userid/password I have for this discussion group doesn't pass. I did find, eventually, a document called "Crystal Reports 2008 Service Pack 3 for Windows - Supported Platforms". When I read it, it tells me that it's compatible with Oracle 11g, generic ODBC, and Windows XP SP3, which is what we are using. I'm hoping that this document has equivalent information to the PAM guide.

Intermittent Unknown Database Connector Error: "Object reference"

Don't know if I'm posting to the right forum. Please redirect me if this post belongs elsewhere.
We use a .NET application by SunGard (Advance Web). We have a whole bunch of Crystal reports we've deployed through this application, and they all work. . .most of the time.
We occasionally, however, find that ALL our Crystal reports return this error:
Unknown Database Connector Error Error in File C:\WINDOWS\TEMP\Report1003 {7B4DBA4D-3EA7-4545-83DB-F5A56AE945FF}.rpt: Unknown Database Connector Error
CrystalReportViewer - CrystalReportViewer1
Error: Object reference not set to an instance of an object.
If we reboot the server, the reports all work again. But sooner or later they start to fail w/ the same error message.
We have Crystal Reports 11.5.8.826 installed on the server.
The network service account has full read/write access to its temp directory (C:\Windows\TEMP).
The reports have never failed when we've used this application on a different server, so we're wondering if there's something amiss with the server.
Anybody have an idea of what's happening here?

Sorry. My mistake. That note wasn't tagged correctly so it didn't show up on the public side of the SAP Note system. I've fixed the tag but it will still take a day or two for it to replicate to the other system. I've pasted the contents of the note below.
Symptom
Error: "Unknown Database Connector Error Failed to retrieve data from the database"
Error: "Unknown Database Connector Error"
Failed to change the Table to CommandTable using RAS SDK
Reproducing the Issue
There are lots of reports designed with regular tables.
A custom RAS SDK application is developed to change the reports from regular table to CommandTable
        rd = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
        string rptPath = Server.MapPath("./axmr310_0_std.rpt");
        rd.Load(rptPath);
        DatabaseController databaseController = rd.ReportClientDocument.DatabaseController;
        ConnectionInfos connectionInfos = databaseController.GetConnectionInfos(null);
        ConnectionInfo oldConnectionInfo = connectionInfos[0];
        ConnectionInfo newConnectionInfo = CreateConnectionInfo();
        databaseController.ReplaceConnection(oldConnectionInfo, newConnectionInfo, null,CrDBOptionsEnum.crDBOptionUseDefault);
        ISCRTable oldTable = (ISCRTable)databaseController.Database.Tables[0];
        CommandTable newTable = new CommandTable();
        newTable.Alias = "Command";
        newTable.Name = "Command";
        newTable.QualifiedName = "Command";
        newTable.ConnectionInfo = newConnectionInfo;
        newTable.CommandText = "SELECT * FROM ds_report.axmr310_0939_12";
        databaseController.SetTableLocation(oldTable, newTable);
        CrystalReportViewer1.ReportSource = rd;
Most of reports can be successfully changed and viewed, however the error occurs with somes of the reports.
BusinessObjects Enterprise XI 3.*
Crystal Reports 2008
Cause
"Verify on First Refresh" option is not selected for those unworking reports.
Resolution
Workaround 1: Check "Verify on First Refresh" option for the report.
Open the report in Crystal Reports Designer
Go to menu File -> Report Options
check the Verify on First Refresh option for the report
Save the report
Workaround 2: Add "rd.VerifyDataBase()" in the code
        databaseController.SetTableLocation(oldTable, newTable);
        rd.VerifyDataBase();

Service 'sapgw05' unknown

hi gurus,
we installed 2 instances of BI7 on one host both working fine on oracle10.2 & windows 2003 server.
1st one is BID for BI Development server instance no- 00 &
2nd one is BIP for BI Production server instance no.- 05
now I am configuring RFC BID to R/3 Dev
BIP to R/3 PRD
R/3 DEV & PROD is on seperate servers
all requirments for both are fulfilled like logical system, ALEREMOTE & BWREMOTE Users for remote logon with correct Authorizations etc.
Now I RFC test connection is working for BID - Bi devlopment instance & R/3 DEV
When I try to RFC test connection on BID BI - Development instance it's running but remote connection does not respond, even not getting any error.
then I try RFC test connection on R/3 production server with instance no. 05 it was giving ERROR:
ERROR: Service 'sapgw05' unknown
Location: SAP - Gateway on host sapgrp / sapgw00
Detail : NIPGetservByName: service 'sapgw05' not found
CALL: Getserv by name
but when I check it with instance 00 test connection is ok
At the time of installation BID instance I configured Local SLD & For BIP instance I Used configure in current SLD Where I used Gateway instance 00.
tell me exact solution for this.
Regards,
Darshan..

> the maybe you must restart the sap instance.
Or use
- SM51
- Goto - Hostnamebuffer - Reset - Entire system
This will also invalidate the services cache.
Markus

HT1339 hi i reset the settings on my ipod and when i connected it to my laptop its not recognized. It shows unknown device code error 43, and its not recognized when i connect to itunes.

Hi I went into settings on my ipod and reset it, when i connected it to my laptop afterwards itsays USB unrecognized unknown device, code error 43. Its also unrecognized in itunes. All my music is still on the ipod, How can I sync it itunes??

Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Also try change the DNS to Google's servers. See:
Public DNS — Google Developers

In Every Page of Employee Self Service it is displaying this Error.

Hi All Experts,
In Employee Self Service i am Getting this Error,overview page is also not displayed.
The initial exception that caused the request to fail, was:
   com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUsage.java:348)
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
    at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java:245)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
    ... 60 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
Version null
DOM version null
Client Type msie7
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0015.20080131100237.0000 (release=645_VAL_REL, buildtime=2008-02-15:22:35:17[UTC], changelist=475271, host=pwdfm101), build date: Tue Jul 08 13:48:16 GMT+05:30 2008
J2EE Engine 7.00 patchlevel 110760.44
Java VM Java HotSpot(TM) Server VM, version:1.4.2_13-b06, vendor: Sun Microsystems Inc.
Operating system Windows 2003, version: 5.2, architecture: x86
Session & Other
Session Locale en_US
Time of Failure Thu Jul 31 10:12:26 GMT+05:30 2008 (Java Time: 1217479346562)
Web Dynpro Code Generation Infos
sap.com/pb
SapDictionaryGenerationCore 7.0014.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:46:55[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0014.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:47:02[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0014.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:35:31[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0014.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:52:27[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0014.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:36:15[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0014.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:36:09[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0014.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:44:27[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0014.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:49:22[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0014.20071029095230.0000 (release=645_VAL_REL, buildtime=2007-11-17:12:01:49[UTC], changelist=466194, host=pwdfm101)
SapWebDynproGenerationCore 7.0014.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:52:33[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0014.20071029095230.0000 (release=645_VAL_REL, buildtime=2007-11-17:12:01:49[UTC], changelist=466194, host=pwdfm101)
sap.com/tcwddispwda
No information available null
sap.com/pb_api
SapDictionaryGenerationCore 7.0014.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:46:55[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0014.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:47:02[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0014.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:35:31[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0014.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:52:27[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0014.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:36:15[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0014.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:36:09[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0014.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:44:27[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0014.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:49:22[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0014.20071029095230.0000 (release=645_VAL_REL, buildtime=2007-11-17:12:01:49[UTC], changelist=466194, host=pwdfm101)
SapWebDynproGenerationCore 7.0014.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:52:33[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0014.20071029095230.0000 (release=645_VAL_REL, buildtime=2007-11-17:12:01:49[UTC], changelist=466194, host=pwdfm101)
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUsage.java:348)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java:245)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
     at com.sap.pcuigp.xssfpm.java.MessageManager.handleException(MessageManager.java:259)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:104)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModelInternal(BackendConnections.java:323)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:256)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:154)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:237)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.connectModel(FPMComponent.java:842)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.connectModel(FPMComponent.java:1072)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.init(BackendConnections.java:141)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.init(InternalBackendConnections.java:233)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:182)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1288)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
     at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:192)
     at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

what user name did you use in JCo??? and the user you made can you give me some insight steps on it...
i mean the user is refernce user, dialuge user or what user.....
My basis team is using their own user name in JCO, bcoz of which only data relating to their user name is showing in ESS / MSS for all employees of PORTAL
also please let me know which profile you used for the user of JCO.
Regards

Service 'sapgw53' unknown / CPI-C error CM_PRODUCT

Similar Messages

Maybe you are looking for